BMW Suspension Parts for BMW Z Series E85/6 (2003-2008)

Rear Shock Mounts (RSM) HP Aluminum/Rubber - E30, E36, E46, Z3, Z4 (P...

T#:3666

Part#: JTD909

Back Ordered

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

These are the best rear shock mounts that we have found for the E30, E36, E46, Z3 & E85 Z4! Featuring CNC-machined billet aluminum mounting base with a replaceable urethane bushing (replacement bushings are just $15 and are changed in minutes!). These mounts are excellent for either street or track because of their low NVH (noise, vibration, and harshness). Plus, the superior design will far outlast the life of stock mounts - maybe even the car itself. You'll never think twice about your shock mounts again! These shock mounts are a direct replacement of the stock mounts so they fit all shocks with the BMW-standard 10mm shock shaft, including all factory and OEM shocks (Boge, Sachs, etc), H&R coil overs, Bilstein shocks and PSS, PSS9, PSS10 coil overs (except the B16 Ride Control Kit). This is sold as a package with new shock mount gaskets, washers, and Nyloc nuts.

Must re-use factory cupped washers!

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less

Rear Differential Mounts - OEM/Meyle HD Rubber - E46, X3, Z4 ...

T#:339943

Part#: E46-MY-DIFF

In Stock

$ 88.99

This product was last offered at the strikethrough price on
02-26-2026

Starting at $ 55.99 USD

Add to Wish List

Starting at $ 55.99 USD

Add to Wish List

These rubber bushings from Meyle are a direct replacement for the stock differential bushings in the E46 3-series, E83 X3 SAV, and Z4 Roadster. If your original bushings are worn (likely around 100,000 miles) these are a great replacement upgrade. The front bushings are the stock OEM type rubber bushings. The rear bushing is a Meyle HD upgrade over stock - about 15% stiffer than the originals. This means the bushing will not flex and twist as much. This puts more power to the wheels since power is no longer used up for 'torquing' the bushing. These are not race bushings; the rubber material is perfectly suitable for street use.

The non-M E46/E83/Z4 models use three differential mounts - two front bushings in the subframe and one rear mount in the diff cover. This set of bushings covers all three. You can opt to include new mounting hardware in the Options list below.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Roadster

Show More Show Less

Fixed Camber Plates

Call In Or Chat For Best Price!

T#:594328

Part#: D160-0390

Ships in 6 Business Days

11% off MSRP $ 281.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 249.99 USD

Add to Wish List

Qty

11% off MSRP

$ 281.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 249.99 USD

Add to Wish List

The camber plates improve on the amount of adjustment and fine-tuning available in the front suspension to improve mechanical grip while cornering. Made to the same quality you'd expect from Dinan and BMW, they help to fine-tune the right amount of camber for Dinan springs. Improved mechanical grip Reduced understeer Works great with Dinan springs Worth 1 point toward your Dinan badge For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.

Show More Show Less

Turner Front Suspension Refresh Kit - Level 1 - E46 Non-M RWD, Z4 2.5...

T#:582865

Part#: T31122343352KT

In Stock

Sale - Save 27% $ 570.99

This product was last offered at the strikethrough price on
05-01-2026

$ 414.44 USD

Add to Wish List

Qty

Sale - Save 27%

$ 570.99

This product was last offered at the strikethrough price on
05-01-2026

$ 414.44 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Front Control Arms
Front Control Arm Bushings

Show More Show Less

Front Sway Bar Link - E46, Z4

T#:338081

Part#: 31351095694

In Stock

Starting at $ 36.52 USD

Add to Wish List

Starting at $ 36.52 USD

Add to Wish List

This is the standard front sway bar / swaybar link for BMW E46 and E85 Z4. It connects the sway bar to the strut. If you hear front end noise when going over bumps while turning we recommend you check these. Alternate BMW Part#31356780847 Sold individually

We also offer an upgraded link from Meyle with heavy duty ball joints for additional durability. See options below.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci M3 - Sorry not for Xi Models!
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less

Complete Rear Upper Shock Mounting Kit

For coupe models only

T#:5416757

Part#: 33521092362TMSKT

Ships on Oct 2, 2026

Sale - Save 11% $ 115.99

This product was last offered at the strikethrough price on
05-03-2026

$ 102.68 USD

Add to Wish List

Qty

Sale - Save 11%

$ 115.99

This product was last offered at the strikethrough price on
05-03-2026

$ 102.68 USD

Add to Wish List

Complete rear upper shock mounting kit includes everything you need to replace old, hardened mounts with new heavy duty replacements. Body seals, hardware, and reinforcement plates are included. Kit includes: Heavy-duty, German-made Lemfoerder rear shock mounts from the E46 M3 Elring shock mount gaskets Heavy-duty rear shock mount reinforcement plates Locking nuts Select your vehicle for additional fitment information. **Note** Upper damper nuts vary in size from shock to shock. If you wish to replace them please measure your damper and source accordingly.

Show More Show Less

Turner Front Suspension Refresh Kit - Level 2 - Z4 2.5i 3.0i 3.0Si ...

T#:582872

Part#: T31122343352KT1

In Stock

Sale - Save 18% $ 722.99

This product was last offered at the strikethrough price on
05-01-2026

$ 591.96 USD

Add to Wish List

Qty

Sale - Save 18%

$ 722.99

This product was last offered at the strikethrough price on
05-01-2026

$ 591.96 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Control Arms & Bushings
Outer Tie Rods
Sway Bar End Links

Show More Show Less

Replacement Bushings for Rear Shock Tower Mounts

T#:1386

Part#: JTD909-75-KIT

Ships on Aug 6, 2026

$ 32.00 USD

Add to Wish List

Qty

$ 32.00 USD

Add to Wish List

The bushings in the Aluminum Rear Shock Tower Mounts (#JTD909) and the Repair Shop Rear Shock Mounts (#JRDRP) are replacable. Simply disassemble the shocks and mounts, replace the bushings, and reassemble. On the JTD909 the shock mount doesn't even have to be removed from the chassis. This set includes enough bushings to replace bushings on both the left and right mounts (4 total).

Show More Show Less

Shocks and spring Installation Kit- Coupe

For coupe models only

T#:638971

Part#: 31336779613KT7

Ships on Oct 2, 2026

Sale - Save 2% $ 275.99

This product was last offered at the strikethrough price on
05-03-2026

$ 271.69 USD

Add to Wish List

Qty

Sale - Save 2%

$ 275.99

This product was last offered at the strikethrough price on
05-03-2026

$ 271.69 USD

Add to Wish List

This kit is contains all new strut and shock mounts and hardware needed when installing a aftermarket suspension on your vehicle.

Suspension Installation Kit - Without Spring Pads- Roadster E85/E86 ...

For roadster models only

T#:638972

Part#: 31336779613KT8

Ships on Oct 2, 2026

Sale - Save 2% $ 285.86

This product was last offered at the strikethrough price on
05-03-2026

$ 280.69 USD

Add to Wish List

Qty

Sale - Save 2%

$ 285.86

This product was last offered at the strikethrough price on
05-03-2026

$ 280.69 USD

Add to Wish List

This kit is contains all new strut and shock mounts and hardware needed when installing a aftermarket suspension on your vehicle.

Turner Rear Suspension Refresh Kit - Level 2 - Z4 2.5i 3.0i/Si ...

T#:583059

Part#: T33321092247KT

Ships on Jan 13, 2027

Sale - Save 5% $ 1,020.99

This product was last offered at the strikethrough price on
02-26-2026

$ 969.19 USD

Add to Wish List

Qty

Sale - Save 5%

$ 1,020.99

This product was last offered at the strikethrough price on
02-26-2026

$ 969.19 USD

Add to Wish List

*Includes heavy duty ECS shock mount reinforcement plates and ECS rear trailing arm bushing limiters for extended bushing life and improved performance*

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Trailing Arm Ball Joint
Control Arm Bushings
Sway Bar End Links
Front Differential Bushings
Reinforcement Plates
Shock Mounts and Gaskets
Rear Subframe Bushings
RTAB Limiters
Rear Diff Carrier Bushings

Show More Show Less

E85 Z4 2.5/3.0/3.0i/3.0si H&R/Bilstein Sport Suspension Package ...

For E85 Roadster Models Only

T#:339103

Part#: TMS21514

Ships on Nov 27, 2026

Sale - Save 4% $ 1,333.00

This product was last offered at the strikethrough price on
07-01-2026

Starting at $ 1,274.99 USD

Add to Wish List

Sale - Save 4%

$ 1,333.00

This product was last offered at the strikethrough price on
07-01-2026

Starting at $ 1,274.99 USD

Add to Wish List

Set your Z4 up for the corners with this shock/spring upgrade package. The Z4 can be a fun car but you can easily bring the handling up a notch with this package. By lowering the ride height and using a stiffer spring it can transform the behavior of the car in the corners. There will be less bodyroll and better balance, allowing you to carry more speed through the twisty sections. And there is almost no downside thanks to the ride attributes of this suspension. H&R Sport springs lower the ride height by up to 1.5" in front and 1.25" in the back and stiffens the spring rate. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 30% stiffer than the stock original springs. We use Bilstein Sport shocks as the dampers and they feature Bilstein's patented and innovative valving system. With this system, small bumps and impacts are absorbed as they should be. But the shocks stiffen for cornering and other suspension motions. It's the best of both worlds as the shock self-adjusts based on suspension motion. These fit with the stock strut and shock mounts, making for an easy and clean install. Parts list: 1 set - H&R Sport Springs (50421) 1 - Bilstein Left Front Sport strut (35-124115) 1 - Bilstein Right Front Sport strut (35-124122) 1 pair - Bilstein Rear Sport Shocks (24-104937) This item fits the following BMWs: 2003-2008 E85 Roadster BMW Z4 2.5i Z4 3.0i Z4 3.0si

Show More Show Less

Cup Kit/Coilover Installation Kit - Without Spring Pads Z4 M ...

T#:41863730

Part#: 31336779613TKT

Ships on Oct 2, 2026

$ 778.86 USD

Add to Wish List

Qty

$ 778.86 USD

Add to Wish List

the smart choice for enthusiasts looking to do their suspension install the right way. Get the performance and reliability your BMW Z4 M deserves with Turner Motorsport’s expert-approved kit.

Turner Rear Suspension Refresh Kit - Level 1 - Z4 2.5i 3.0i/Si ...

T#:583023

Part#: T33326770824KT

Ships on Jan 13, 2027

Sale - Save 1% $ 750.99

This product was last offered at the strikethrough price on
06-03-2026

$ 745.63 USD

Add to Wish List

Qty

Sale - Save 1%

$ 750.99

This product was last offered at the strikethrough price on
06-03-2026

$ 745.63 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Sway Bar End Links
Rear Trailing Arm Bushings
Rear Strut Mounts
Rear Sway Bar End Link
New Hardware

Show More Show Less

Steering Knuckle Spreader

T#:580736

Part#: CTA4008

In Stock

$ 81.88 USD

Add to Wish List

Qty

$ 81.88 USD

Add to Wish List

For removal and fitting of shock absorbers without damaging the aluminum or cast iron knuckle

CTA Control Arm Sleeve Tool Kit - E30 E36 E46

T#:585406

Part#: CTA8920

Ships on Aug 6, 2026

$ 273.35 USD

Add to Wish List

Qty

$ 273.35 USD

Add to Wish List

Removes and presses in front control arm bushings without having to remove the control arm from your vehicle.

15 Pc. Shock and Strut Service Kit

T#:1316772

Part#: CTA7466

Ships on Aug 6, 2026

$ 217.56 USD

Add to Wish List

Qty

$ 217.56 USD

Add to Wish List

Tightens top mount nut with proper torque while holding the strut

VW/Audi Strut Nut Socket

T#:2393370

Part#: CTA4005

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Special oval shaped bit end services Suspension Strut Housing Nuts found on mostly newer VW & Audi models

Go Through Deep Strut Socket - 18mm

T#:1211222

Part#: CTA3039X03

Ships on Aug 6, 2026

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

Used to properly tighten strut nuts

Go Through Deep Strut Socket - 22mm

T#:1211223

Part#: CTA3039X06

In Stock

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

Used to properly tighten strut nuts

Go Through Deep Strut Socket - 21mm

T#:1211226

Part#: CTA3039X05

Ships in 2 Business Days

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

Used to properly tighten strut nuts

CTA Tools Go-Thru Deep Socket - 19mm

T#:48573714

Part#: 7513

Ships on Aug 6, 2026

$ 10.99 USD

Add to Wish List

Qty

$ 10.99 USD

Add to Wish List

Why a strut nut socket? To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. Strut nut sockets allow for the use of a 21mm wrench to hold the damper shaft allowing you to achieve proper torque. An improper torque value may result in premature mount failure - or worse.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Suspension Parts for BMW Z Series E85/6 (2003-2008)

Sub-Categories

Rear Shock Mounts (RSM) HP Aluminum/Rubber - E30, E36, E46, Z3, Z4 (P...

Rear Differential Mounts - OEM/Meyle HD Rubber - E46, X3, Z4 ...

Fixed Camber Plates

Turner Front Suspension Refresh Kit - Level 1 - E46 Non-M RWD, Z4 2.5...

Front Sway Bar Link - E46, Z4

Complete Rear Upper Shock Mounting Kit

Turner Front Suspension Refresh Kit - Level 2 - Z4 2.5i 3.0i 3.0Si ...

Replacement Bushings for Rear Shock Tower Mounts

Shocks and spring Installation Kit- Coupe

Suspension Installation Kit - Without Spring Pads- Roadster E85/E86 ...

Turner Rear Suspension Refresh Kit - Level 2 - Z4 2.5i 3.0i/Si ...

E85 Z4 2.5/3.0/3.0i/3.0si H&R/Bilstein Sport Suspension Package ...

Cup Kit/Coilover Installation Kit - Without Spring Pads Z4 M ...

Turner Rear Suspension Refresh Kit - Level 1 - Z4 2.5i 3.0i/Si ...

Steering Knuckle Spreader

CTA Control Arm Sleeve Tool Kit - E30 E36 E46

15 Pc. Shock and Strut Service Kit

VW/Audi Strut Nut Socket

Go Through Deep Strut Socket - 18mm

Go Through Deep Strut Socket - 22mm

Go Through Deep Strut Socket - 21mm

CTA Tools Go-Thru Deep Socket - 19mm

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results