BMW Suspension Parts for BMW Z Series E85/6 (2003-2008)

Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
2006 - 2008 E86 Z4 3.0si Z4 M Coupe
2002 - 2008 E85 Z4 Roadster Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster

• Compatible with Air Lift 3H and 3P management systems
• Powers a single compressor
• Ensures seamless functionality
• Necessary for dual compressor setup

Air Lift Viair 444C Dual Pack Compressor - 200 PSI - Chrome offers a significant upgrade for BMW air suspension systems, delivering superior performance and reliability. Engineered by Turner Motorsport, these compressors are designed to enhance efficiency and durability.

• Newly-Developed Intercooler Head: Improves compressor efficiency and performance.
• Stainless Steel Braided Leader Hoses: Includes inline check valve assembly for enhanced protection against high amperage restarts.
• Chrome Finish: Provides increased durability and a sleek, aesthetic appeal.
• Complete Kit: Includes air filter assemblies, remote mount brackets, fittings, spare air filter elements, nuts, bolts, washers, lock washers, and airline clips.
• Easy Installation: Compatible with various air suspension setups for a hassle-free upgrade.

Upgrade your BMW's air suspension system with the Air Lift Viair 444C Dual Pack Compressor for top-tier performance and durability.

The BMW Z4 / E60 / E61 / E39 Front Sway Bar Bushings (25mm) are essential components designed to enhance the suspension performance of various BMW models, including the Z4, E60, E61, and E39. These bushings are critical for connecting the front sway bar to the chassis, helping to improve handling and stability during driving.

Key Features:

1. Specifically for 25mm Sway Bars:

   • These bushings are designed for vehicles equipped with a 25mm front sway bar, ensuring a perfect fit for optimal performance and effective control of body roll.

2. Functionality:

   • The sway bar bushings serve to connect the sway bar to the vehicle's chassis, allowing it to effectively minimize body roll when cornering. This results in improved stability and handling, enhancing the overall driving experience.

3. Material Options:

   • Available in rubber and polyurethane:
     • Rubber bushings provide excellent noise dampening and a comfortable ride but may wear out more quickly under heavy stress.
     • Polyurethane bushings are known for their durability and performance benefits, offering reduced flex and improved handling, making them a favored choice for performance-oriented drivers.

4. Improved Handling Characteristics:

   • Replacing worn or degraded bushings with new ones can lead to noticeable improvements in the vehicle's handling dynamics, resulting in more responsive steering and enhanced control during spirited driving.

5. Wide Compatibility:

   • These bushings are designed to fit a variety of BMW models, including the Z4, E60, E61, and E39, making them an excellent choice for owners looking to maintain or enhance their vehicle’s performance.

6. Installation:

   • The installation process typically involves detaching the sway bar from the suspension system. While experienced DIY enthusiasts may tackle this project, professional installation is often recommended to ensure proper alignment and performance.

Benefits of Replacement or Upgrade:

• Enhanced Cornering Stability: New bushings significantly improve the sway bar's effectiveness, reducing body roll and enhancing cornering stability.
• Increased Steering Precision: Fresh bushings provide better feedback from the suspension system, resulting in a more connected driving experience.
• Long-lasting Performance: Upgrading to polyurethane options can increase the lifespan of the sway bar components, minimizing the frequency of replacements.

In summary, the BMW Z4 / E60 / E61 / E39 Front Sway Bar Bushings (25mm) are critical for maintaining and enhancing the handling and performance of these BMW models. Whether you are replacing worn-out bushings or upgrading to polyurethane for improved durability and responsiveness, ensuring these components are in top condition is vital for enjoying the exceptional driving dynamics associated with BMW vehicles.

Upgrade your E46's rear subframe with the Revshift Combo Kit, featuring 75D durometer polyurethane rear subframe bushings and a comprehensive weld-in reinforcement plate kit. Designed to address the notorious cracking and ripping of rear subframe mounting points over time, this kit provides a robust solution to prevent costly damage to your vehicle.

Key Features:

Complete Solution: Includes 95A durometer polyurethane rear subframe bushings and precision laser-cut 14-gauge steel reinforcement plates for comprehensive subframe reinforcement. Prevents Damage: Weld-in reinforcement plates protect against cracks and damage to the chassis, ensuring long-term durability and stability. Enhanced Handling: Revshift polyurethane rear subframe bushings replace OEM rubber bushings, stiffening mounting points to improve handling and performance. Durable Construction: Polyurethane bushings are designed to last and do not wear out like rubber OEM bushings, providing consistent performance over time. Proper Dampening: Polyurethane bushings properly dampen the rear subframe, enhancing overall vehicle stability and control. Benefits:

Improved handling capabilities Long-lasting durability compared to OEM rubber bushings Protection against bending or cracking of subframe mounts The comprehensive kit includes all necessary components for installation Upgrade your E46's rear subframe with the Revshift Combo Kit for superior handling, durability, and protection against chassis damage. Boost your driving experience with enhanced performance and stability.

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Sway Bar End Links
Rear Trailing Arm Bushings
Rear Strut Mounts
Rear Sway Bar End Link
New Hardware

Sway bar end links connect the swaybar to the rest of the suspension, preventing body roll and keeping everything in line in tight turns. This exposes these links to a high amount of stress and pressure, often leading to split bushings and sloppy body control and knocking noises. OEM Lemförder sway bar links are the perfect option to restore body control and eliminate knocking noises.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!