BMW Tools & Specialty Equipment for BMW Z Series E85/6 (2003-2008)

100% pure silicone formula that can be applied to the entire brake assembly. Prevent brake squeal that can occur in metal-to-metal contact. Also increases brake-life by protecting and lubricating all critical braking components.

Eliminate brake squeal, prevent corrosion, and reduce accelerated brake wear. High temp formula won't melt under excessive brake heat.

One 4 gram packet, minimum one packet recommended per axle.

Elevate your lifting experience with the Schwaben Long Low Profile - High Lift Floor Jack. Certified for excellence and designed with a keen understanding of European car enthusiasts' needs, this jack is a testament to precision, durability, and performance. Don't compromise on quality—choose the Schwaben advantage for all your lifting endeavors.

Designed with precision, crafted for performance, and backed by our lifetime replacement program, the Schwaben Long Low Profile - High Lift Floor Jack is a must-have tool for every European car aficionado. This jack is engineered to cater to the unique needs of low ground clearance vehicles, ensuring that your prized possessions are lifted with care and precision.

Key Features:

• One Pump Reach: With its innovative one-pump feature, this floor jack effortlessly reaches contact on most cars, streamlining your lifting process.
• Low Profile Advantage: Boasting a mere 2-3/4" low height and a deep-reach lift arm, this jack is tailored for those sports cars and luxury vehicles that ride close to the ground.
• Hydraulic System Protection: The dual pump pistons are expertly shielded to thwart contaminants from compromising the hydraulic system's integrity.
• Built for Durability: Crafted with heavy gauge construction and fortified with rolled edges, this floor jack guarantees unwavering strength and longevity.
• Precise Control: The U-Joint release mechanism offers meticulous control over load descent at any handle position, ensuring the safety of both you and your vehicle.
• Maneuverability Redefined: Upgraded casters allow seamless maneuverability and effortless positioning of the jack, empowering you to find that perfect lifting spot.
• Safety First: The internal by-pass valve prevents over-pumping, shielding the hydraulic system from stress-induced issues.
• Vehicle Protection: A full cover rubber saddle pad and a protective foam cover on the handle are in place to prevent any unintended damage during the lifting process.
• Impressive Capacity: With a remarkable 4000 lb. capacity, this jack is ready to tackle a range of European vehicles.
• LIFETIME REPLACEMENT: Like almost all Schwaben products, this jack is backed by our lifetime replacement program in case anything goes wrong!

Specifications:

• Min Height: 2-3/4"
• Max Height: 24"
• Handle Length: 49-1/4"
• Jack Body Length: 35"
• Length from Pivot Point to Center of Jack Pad: 22"
• Front Casters: 2-1/2" diameter x 2" width
• Saddle Diameter: 4" with full saddle pad
• Weight Capacity: 4000 lbs.
• ANSI / ASME PALD 2009 Certified

Also included are the Schwaben Aluminum 3-Ton Jack Stands. These ultra-light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands show how much pride in workmanship goes into our stands. These stands feature all-aluminum construction with heavy-duty flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to ensure the pin stays in place.  

• Min. Height is 10.6".
• Max Height is 15.4".
• Large 7" diameter base.
• Outer support tube is 2-1/8" in diameter.

For replacement parts, please call us and ask for:

• ES#4430428 - Replacement Screw Set
• ES#4430429 - Replacement Front Wheel
• ES#4430430 - Replacement Caster Wheel

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

The VIM Tools 1/4" Drive Hex Bit Ratchet is a precision tool engineered for maximum efficiency in tight spaces. Boasting the smallest and lowest profile head in the industry, this double-ended ratchet is perfect for driving all 1/4" hex bits.

The reversible 48-tooth gear head requires just 7.5 degrees of sweep, allowing for precise control, while the quick-disk on the drive head enables rapid tightening or loosening of fasteners when ratcheting isn’t needed. With an overall length of just 3-1/2", a width of 9/16", and a thickness of 5/16", this patented tool offers unmatched accessibility and performance for any task.

Key Features:

• Industry-Leading Low Profile: Smallest and thinnest ratchet head available.
• Double-Ended Design: 1/4" hex reversible ratchet head and 1/4" hex fixed head for versatile use.
• Quick-Disk Functionality: Enables fast tightening or loosening without ratcheting.
• Reversible 48-Tooth Gear Head: Precise operation with only 7.5 degrees of sweep.
• Compact Dimensions: Overall length of 3-1/2", 9/16" width, and 5/16" thickness for easy access in confined spaces.
• Patented Worldwide: A unique and innovative tool recognized globally.

The Foxwell T20 TPMS sensor integrates both 315 MHz and 433 MHz frequencies, replacing more than 99% of OEM direct TPMS sensors on the market. The all-new, high-precision air valve prevents air leakage and provides a durable seal - an upgrade over the outgoing T10. Its proprietary sensor body features a long-lasting, lightweight 3V battery and supports unlimited wireless programming. Sensors can easily be activated and programmed with the Foxwell T2000 TPMS Service Tool (ES#4674668).

Features:

Rubber valve stem Supports 315MHz and 433MHz frequencies High-precision air valve to avoid air leakage 0-30° adjustability Built-in battery with an extended service life (more than 5 years) Temperature reading range of -40°F to 257°F Pressure monitoring range of 0 to 130.53 psi 12G weight

Upgrade your toolkit with the 22mm Thin Wrench.

Engineered for precision and versatility, this thin wrench is a must-have for any mechanic or DIY enthusiast. Its slim design allows for easy access to tight spaces, while its durable construction ensures reliable performance. With a comfortable grip and corrosion-resistant finish, this wrench is perfect for a wide range of automotive and household tasks.

• Slim design for easy access to tight spaces
• Durable construction for reliable performance
• Comfortable grip for extended use
• Corrosion-resistant finish for longevity