BMW Brakes & Brake Parts for BMW Z Series E85/6 (2003-2008)

Clear BMW chassis

Please ensure your correct model is selected

Some of the most critical components of your BMW are those of the brake system. Whether you are performing maintenance on your daily driver or stocking up on performance brakes for race season, keeping your brakes in working order is paramount to enjoying your car. At Turner Motorsport, we have everything you need to replace or upgrade your brake pads, brake rotors, brake lines, and brake fluid. Choose from our excellent selection of brake components to keep your BMW stopping confidently.

Sub-Categories

Sort By:

Packaged by Turner - Corporate Logo
T#:388172
Part#: E46135BRAKE
Ships in 3 Business Days
$ 2,334.99

This product was last offered at the strikethrough price on
06-19-2026

Starting at $ 2,334.17 USD
Free Shipping
Starting at $ 2,334.17 USD
Free Shipping

135/BMW Performance brakes for your E36 and E46! This kit uses the factory BMW Performance Brembo 6-piston calipers (same as 135i) with E46 330-sized rotors (325x25mm / 12.8") for a bolt on braking upgrade. Everything comes complete - 6-piston calipers, rotors, custom caliper bracket, brake lines, and a pad sensor. Choose your preferred brake fluid and brake pads below (or call us for a recommendation).

Brake rotor options -

  • OEM Pagid Coated - blank rotors with anti-corrosion coating
  • Turner/Centric cross-drilled
  • Turner/Centric slotted
  • Turner/Cetnric cross-drilled & slotted
  • BMW Peformance floating and cross-drilled
  • ECS 2-piece floating with cross-drilled and slotted

Brake pad options -

  • OEM Textar (same as stock 135i)
  • Centric Posi-Quiet - nearly dust-free (Turner preferred!)
  • Hawk Ceramic nearly dust-free
  • Hawk HPS performance
  • StopTech performance

This is a direct fit to all E36 and E46 (not E46 M3) and comes with a lot more braking power than standard (especially on non-M E36). Consequently there will be more front brake bias - the front brakes have more bite than before. During normal street driving all you will notice is that the brakes feel stronger. For track driving we recommend a more aggressive rear pad to balance the brake bias or a StopTech or Brembo big brake kit that has been properly engineered for the chassis (not a retrofit).

Requires 17" wheels and wheel spacers may be required depending on wheel spoke design. E46 Style 68 wheels shown are used with 5mm spacer.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:338110
Part#: 34111162282
In Stock at Vendor
Starting at $ 157.14 USD
Free Shipping
Starting at $ 157.14 USD
Free Shipping
This is a pair (2) of front brake rotors/discs for E36 318/325/328, E46 323/328 (coupe & sedan only), Z3 2.5 and 2.8, and Z4 2.5. This set includes one front left and one front right brake rotor, so the price shown is for a pair.

We offer a choice of brands to satisfy our customer's stringent quality standards -
Pagid Coated - an OEM type rotor made to the same dimensions and specs as the original design. These rotors have a high carbon content for excellent wear and thermal resistance. We like these rotors a lot because the quality is very high and the entire rotor is dip coated with anti-corrosion layer to prevent rust on the hub and in the cooling vanes, while the Zimmerman are only spray coated.
Zimmermann Coated - an OEM type rotor made to the same dimensions and specs as the original design. These rotors also have a high carbon content. These are high quality and spray coated with anti-corrosion layer to prevent rust on the hub and in the cooling vanes.

These front brake rotors / brake discs fit:
1992-1995 E36 318i, 318is, 318ic, 325i, 325is, 325ic (coupe, sedan & convertible)
1996-1999 E36 318i, 318is, 318ic, 328i, 328is, 328ic (coupe, sedan & convertible)
1999-2000 E46 323i, 323Ci (sedan & coupe only, NO cabrio/wagon )
1997-2002 Z3 2.8 roadster & coupe
1999-2000 Z3 2.3 roadster & coupe
2001-2002 Z3 2.5 roadster & coupe
2003-2006 Z4 2.5i roadster
Show More Show Less
Packaged by Turner - Corporate Logo
T#:338148
Part#: 34216766219
In Stock at Vendor
$ 187.99

This product was last offered at the strikethrough price on
05-07-2026

Starting at $ 181.98 USD
Free Shipping
Starting at $ 181.98 USD
Free Shipping
These are the stock replacement rear brake discs for BMW E85 Z4 3.0i Z4 3.0si 2003-2008. Priced per pair.

We offer a choice of brands to satisfy our customer's stringent quality standards -
Pagid Coated - an OEM type rotor made to the same dimensions and specs as the original design. These rotors have a high carbon content for excellent wear and thermal resistance. We like these rotors a lot because the quality is very high and the entire rotor is dip coated with anti-corrosion layer to prevent rust on the hub and in the cooling vanes, while the Zimmerman are only spray coated.
Zimmermann Coated - an OEM type rotor made to the same dimensions and specs as the original design. These rotors also have a high carbon content. These are high quality and spray coated with anti-corrosion layer to prevent rust on the hub and in the cooling vanes

This item fits the following BMWs:
2003-2008 E85 BMW Z4 3.0i Z4 3.0si
Show More Show Less

Packaged by Turner - Corporate Logo
T#:338799
Part#: TMS2180
Back Ordered
$ 3,087.99

This product was last offered at the strikethrough price on
06-09-2026

Starting at $ 3,079.93 USD
Free Shipping
Starting at $ 3,079.93 USD
Free Shipping
This brake package for the 2006-2008 BMW Z4M Roadster/Coupe comes with everything you need to perform a major brake overhaul -

Front and rear rotors with hardware - Genuine BMW replacements
Front and rear brake pads - OEM organic, street performance, mixed track/street, or full race
Front and rear pad wear sensors
Brake fluid - DOT4 street or DOT4 racing fluid

Our brake package uses the same replacement parts from the same manufacturers as BMW dealers use to service your car. The big difference is that we're able to offer these parts for a substantial savings from the dealer markup price. As an independent company we're able to buy our parts from multiple OEM suppliers whereas BMW dealers must buy their parts from BMW. We're able to shop from different vendors which gets you a better price while still maintaining original quality. You don't have to pay high prices at the dealer to get the same quality and performance!

In some cases, we offer performance alternatives to the OEM items. For an enthusiastic BMW owner, the standard BMW part may be inadequate and we offer an upgraded part, based on our almost 20 years of BMW tuning experience. We seek out high quality suppliers and designs that we would want on our own vehicles. Many times performance parts will fix a design flaw with the original BMW part, improving your performance at the same time.

Brake Package FAQ
Brake Pad Buying Guide
Brake Rotor Buying Guide

Applications:
2006-2008 BMW E85 Z4 M Roadster
2006-2008 BMW E86 Z4 M Coupe
Show More Show Less

Packaged by Turner - Corporate Logo
T#:339105
Part#: TMS339105
Ships in 1 Business Day
Sale - Save 2% $ 715.99

This product was last offered at the strikethrough price on
06-09-2026

Starting at $ 703.80 USD
Free Shipping
Sale - Save 2%
$ 715.99

This product was last offered at the strikethrough price on
06-09-2026

Starting at $ 703.80 USD
Free Shipping
This brake package for the Z4 3.0 comes with everything you need to perform a major brake overhaul -

Front and rear rotors with hardware
Front and rear brake pads
Front and rear pad wear sensors
Brake fluid

Our brake package uses the same replacement parts from the same manufacturers as BMW dealers use to service your car. The big difference is that we're able to offer these parts for a substantial savings from the dealer markup price. As an independent company we're able to buy our parts from multiple OEM suppliers whereas BMW dealers must buy their parts from BMW. We're able to shop from different vendors which gets you a better price while still maintaining original quality. You don't have to pay high prices at the dealer to get the same quality and performance.

In some cases, we offer performance alternatives to the OEM items. For an enthusiastic BMW owner, the standard BMW part may be inadequate and we offer an upgraded part, based on our almost 20 years of BMW tuning experience. We seek out high quality suppliers and designs that we would want on our own vehicles. Many times performance parts will fix a design flaw with the original BMW part, improving your performance at the same time.

Brake Package FAQ
Brake Pad Buying Guide
Brake Rotor Buying Guide


E46 Brake Package fits the following BMWs:
2003-2008 E85 BMW Z4 3.0i
Show More Show Less
Pagid Racing - Corporate Logo
T#:553569
Part#: 129529
Ships in 4 Business Days
$ 408.99 USD
Free Shipping
$ 408.99 USD
Free Shipping
The RSL29 pad is an endurance racing compound with long life and great wear characteristics. It has stable friction over a broad temperature range which makes them a very easy to use and predictable braking pad in a lot of environments. An evolution of the RSL19 endurance pad designed for more advanced drivers. This compound combines the outstanding wear rate of the RSL19 with a slightly higher coefficient of friction and initial bite. RSL29 also features improved hot fade resistance over the RSL19. In addition to the endurance racing, this pad will also be found in GT and VLN classes and Touring Cars (including our own E46 World Challenge cars). BMW has been using Pagid Yellow pads on their Nurburgring test vehicles and Ring Taxi for years.

This is the set of FRONT pads.

This item fits the following BMWs:
1995-1998  E36 BMW  M3 
2001-2006  E46 BMW  330i M3 
1989-1995  E34 BMW  525i 530i 535i 540i M5 
1988-1994  E32 BMW  735i 735il 740i 740il 750il 
1997-2002  Z3 BMW  M Roadster M Coupe
2006-2008  Z4 BMW  M Roadster M Coupe
Show More Show Less

Pagid Racing - Corporate Logo
T#:553573
Part#: 268529
In Stock
$ 393.99 USD
Free Shipping
$ 393.99 USD
Free Shipping
The RSL29 pad is an endurance racing compound with long life and great wear characteristics. It has stable friction over a broad temperature range which makes them a very easy to use and predictable braking pad in a lot of environments. An evolution of the RSL19 endurance pad designed for more advanced drivers. This compound combines the outstanding wear rate of the RSL19 with a slightly higher coefficient of friction and initial bite. RSL29 also features improved hot fade resistance over the RSL19. In addition to the endurance racing, this pad will also be found in GT and VLN classes and Touring Cars (including our own E46 World Challenge cars). BMW has been using Pagid Yellow pads on their Nurburgring test vehicles and Ring Taxi for years.

This is the set of REAR pads.

This item fits the following BMWs:
1999-2005  E46 BMW  330i 330ci 330xi M3 
1999-2003  E39 BMW  M5 
1995-2001  E38 BMW  740i 740il 
1991-1997  E31 BMW  840i 840ci 850i 850ci 850csi 
2004-2010  E83 BMW  X3 2.5i X3 3.0i X3 3.0si 
2000-2006  E53 BMW  X5 3.0i X5 4.4i X5 4.6is X5 4.8is 
2006-2008  Z4 BMW  Z4 M Roadster M Coupe 
2000-2003  E52 BMW  Z8 Roadster
Show More Show Less
Pagid Racing - Corporate Logo
T#:553546
Part#: 128529
Back Ordered
$ 419.99 USD
Free Shipping
$ 419.99 USD
Free Shipping
The RSL29 pad is an endurance racing compound with long life and great wear characteristics. It has stable friction over a broad temperature range which makes them a very easy to use and predictable braking pad in a lot of environments. An evolution of the RSL19 endurance pad designed for more advanced drivers. This compound combines the outstanding wear rate of the RSL19 with a slightly higher coefficient of friction and initial bite. RSL29 also features improved hot fade resistance over the RSL19. In addition to the endurance racing, this pad will also be found in GT and VLN classes and Touring Cars (including our own E46 World Challenge cars). BMW has been using Pagid Yellow pads on their Nurburgring test vehicles and Ring Taxi for years.

This is the set of Rear pads.

This item fits the following BMWs:
1984-1991  E30 BMW  M3
1992-1998  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci
1989-1995  E34 BMW  525i 530i 535i 540i M5
1997-2003  E39 BMW  525i 528i 530i 540i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  Z4 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
Show More Show Less

Pagid Racing - Corporate Logo
T#:553541
Part#: 218029
In Stock
$ 476.99 USD
Free Shipping
$ 476.99 USD
Free Shipping
The RSL29 pad is an endurance racing compound with long life and great wear characteristics. It has stable friction over a broad temperature range which makes them a very easy to use and predictable braking pad in a lot of environments. An evolution of the RSL19 endurance pad designed for more advanced drivers. This compound combines the outstanding wear rate of the RSL19 with a slightly higher coefficient of friction and initial bite. RSL29 also features improved hot fade resistance over the RSL19. In addition to the endurance racing, this pad will also be found in GT and VLN classes and Touring Cars (including our own E46 World Challenge cars). BMW has been using Pagid Yellow pads on their Nurburgring test vehicles and Ring Taxi for years.

This is the set of FRONT pads.

This item fits the following BMWs:
1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci
1995-2003  Z3 BMW  1.9 2.3 2.5 2.8 2.5i 3.0i
2003-2008  Z4 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
Show More Show Less

Pagid Racing 1204 RSL29 Compound Brake Pads
This pad set fits the following StopTech 4-piston calipers: ST40 / ST45
Pagid Racing - Corporate Logo
T#:1731
Part#: TMS1731
Ships in 7 Business Days
$ 471.99 USD
Free Shipping
$ 471.99 USD
Free Shipping
does not include pad wear sensors - 18.0mm pad thickness
Pagid Racing - Corporate Logo
T#:553571
Part#: 2685RSL1
Ships in 7 Business Days
$ 379.99 USD
Free Shipping
$ 379.99 USD
Free Shipping

The latest in the Yellow line takes all of the RSL29 characteristics and adds a bit more aggressive behavior. Friction levels go up for more initial bite and better fade resistance. Modulation and release stays close to RSL29 levels. Pad and rotor wear is a little more than on the previous Yellows but still within reasonable levels and the RSL1 is still considered an extended endurance pad. Its development stemming from GT classes at Le Mans and Nürburgring.

Since Pagid pads tend to "out-gas" we recommend using these pads with a new gas-slotted or cross-drilled rotor for the best performance. Pagid brake pads are not compatible with previously used rotors, especially if used with a carbon or Kevlar based race pad.

This item fits the following BMWs:
1999-2005 E46 BMW 330i 330ci 330xi M3 
1999-2003 E39 BMW M5 
1995-2001 E38 BMW 740i 740il 
1991-1997 E31 BMW 840i 840ci 850i 850ci 850csi 
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si 
2000-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is X5 4.8is 
2006-2008 Z4 BMW Z4 M Roadster M Coupe 
2000-2003 E52 BMW Z8 Roadster

Show More Show Less
Performance Tool - Corporate Logo
T#:1855990
Part#: W89200
In Stock at Vendor
$ 107.99 USD
Free Shipping
$ 107.99 USD
Free Shipping
For use on most import and domestic vehicles equipped with disc brakes.


Pagid Racing - Corporate Logo
T#:553570
Part#: 1295RST1
Ships on Aug 20, 2026
$ 429.99 USD
Free Shipping
$ 429.99 USD
Free Shipping

Pagid's newest sprint racing pad was developed for racing cars achieving very high average speeds with short braking distances and functional aero. The RST pads feature very high friction levels for the quickest bite and highest fade resistance than any other Pagid pad. RST pads are broken into 5 levels and all have ranging bite and release characteristics. RST pads will trade low wear for torque output and faster response. These were developed based on the needs of race engineers in World Challenge, Daytona Prototype, and GTLM where functional aero meant high grip in the corners and smaller braking zones.

RST Brake Pad Types:

  • RST1 -  Very high friction coefficient, high initial bite, progressive torque curve, very high fade resistant
  • RST2 - Medium high friction coefficient, good initial bite, mild progressive torque curve, good pedal feel
  • RST3 - High friction coefficient, good initial bite, low heat conductivity, excellent modulation and release characteristics
  • RST4 - Medium friction coefficient, good initial bite, mild progressive torque curve, high heat tolerance with consistent feel
  • RST5 - Optimum thermal management, absolutely fluid fade resistant, highly developed recovery properties, extremely high friction coefficient


This item fits the following BMWs:
1995-1998 E36 BMW M3 
2001-2006 E46 BMW 330i M3 
1989-1995 E34 BMW 525i 530i 535i 540i M5 
1988-1994 E32 BMW 735i 735il 740i 740il 750il 
1997-2002 Z3 BMW M Roadster M Coupe
2006-2008 Z4 BMW M Roadster M Coupe

Show More Show Less
Pagid Racing - Corporate Logo
T#:553637
Part#: 21801285RSL29KT
Back Ordered
$ 895.99 USD
Free Shipping
$ 895.99 USD
Free Shipping
The RSL29 pad is an endurance racing compound with long life and great wear characteristics. It has stable friction over a broad temperature range which makes them a very easy to use and predictable braking pad in a lot of environments. An evolution of the RSL19 endurance pad designed for more advanced drivers. This compound combines the outstanding wear rate of the RSL19 with a slightly higher coefficient of friction and initial bite. RSL29 also features improved hot fade resistance over the RSL19. In addition to the endurance racing, this pad will also be found in GT and VLN classes and Touring Cars (including our own E46 World Challenge cars). BMW has been using Pagid Yellow pads on their Nurburgring test vehicles and Ring Taxi for years.

This kit includes Front and Rear pads.

This item fits the following BMWs:
1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci
1995-2003  Z3 BMW  1.9 2.3 2.5 2.8 2.5i 3.0i
2003-2008  Z4 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
Show More Show Less
Pagid Racing - Corporate Logo
T#:553650
Part#: 12952685RSL29KT
Ships in 7 Business Days
$ 732.99 USD
Free Shipping
$ 732.99 USD
Free Shipping
The RSL29 pad is an endurance racing compound with long life and great wear characteristics. It has stable friction over a broad temperature range which makes them a very easy to use and predictable braking pad in a lot of environments. An evolution of the RSL19 endurance pad designed for more advanced drivers. This compound combines the outstanding wear rate of the RSL19 with a slightly higher coefficient of friction and initial bite. RSL29 also features improved hot fade resistance over the RSL19. In addition to the endurance racing, this pad will also be found in GT and VLN classes and Touring Cars (including our own E46 World Challenge cars). BMW has been using Pagid Yellow pads on their Nurburgring test vehicles and Ring Taxi for years.

This is the set of Front and Rear pads.

This item fits the following BMWs:
2000-2006 E46 BMW 330i 
2003-2008 Z4 BMW M Coupe, M Roadster
Show More Show Less

Dinan - Corporate Logo
T#:598268
Part#: D290-0857-R
Ships in 5 Business Days
11% off MSRP $ 5,849.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 5,199.99 USD
Free Shipping
11% off MSRP
$ 5,849.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 5,199.99 USD
Free Shipping
The Dinan by Brembo brake conversion offers the ultimate in stopping power for the most demanding driving enthusiast. Extensive testing on the street and at the track has enabled the folks with Dinan and Brembo to develop a custom system that has been tuned for optimum performance while avoiding some of the typical downfalls that are associated with "big brake kits," such as unbalanced proportioning, poor pedal feel and unacceptable noise levels.
Show More Show Less

Dinan - Corporate Logo
T#:598265
Part#: D290-0857-B
Back Ordered
11% off MSRP $ 5,849.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 5,199.99 USD
Free Shipping
11% off MSRP
$ 5,849.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 5,199.99 USD
Free Shipping
The Dinan by Brembo brake conversion offers the ultimate in stopping power for the most demanding driving enthusiast. Extensive testing on the street and at the track has enabled the folks with Dinan and Brembo to develop a custom system that has been tuned for optimum performance while avoiding some of the typical downfalls that are associated with "big brake kits," such as unbalanced proportioning, poor pedal feel and unacceptable noise levels.
Show More Show Less
Dinan - Corporate Logo
T#:597747
Part#: D290-0471-RD
Back Ordered
11% off MSRP $ 7,199.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 6,399.99 USD
Free Shipping
11% off MSRP
$ 7,199.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 6,399.99 USD
Free Shipping
The Dinan by Brembo brake conversion offers the ultimate in stopping power for the most demanding driving enthusiast. Extensive testing on the street and at the track has enabled the folks with Dinan and Brembo to develop a custom system that has been tuned for optimum performance while avoiding some of the typical downfalls that are associated with "big brake kits," such as unbalanced proportioning, poor pedal feel and unacceptable noise levels.
Show More Show Less

Dinan - Corporate Logo
T#:598269
Part#: D290-0857-RD
Back Ordered
11% off MSRP $ 5,849.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 5,199.99 USD
Free Shipping
11% off MSRP
$ 5,849.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 5,199.99 USD
Free Shipping
The Dinan by Brembo brake conversion offers the ultimate in stopping power for the most demanding driving enthusiast. Extensive testing on the street and at the track has enabled the folks with Dinan and Brembo to develop a custom system that has been tuned for optimum performance while avoiding some of the typical downfalls that are associated with "big brake kits," such as unbalanced proportioning, poor pedal feel and unacceptable noise levels.
Show More Show Less
Dinan - Corporate Logo
T#:597743
Part#: D290-0471-B
Back Ordered
11% off MSRP $ 7,199.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 6,399.99 USD
Free Shipping
11% off MSRP
$ 7,199.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 6,399.99 USD
Free Shipping
The Dinan by Brembo brake conversion offers the ultimate in stopping power for the most demanding driving enthusiast. Extensive testing on the street and at the track has enabled the folks with Dinan and Brembo to develop a custom system that has been tuned for optimum performance while avoiding some of the typical downfalls that are associated with "big brake kits," such as unbalanced proportioning, poor pedal feel and unacceptable noise levels.
Show More Show Less

Dinan - Corporate Logo
T#:598267
Part#: D290-0857-BD
Back Ordered
11% off MSRP $ 5,849.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 5,199.99 USD
Free Shipping
11% off MSRP
$ 5,849.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 5,199.99 USD
Free Shipping
The Dinan by Brembo brake conversion offers the ultimate in stopping power for the most demanding driving enthusiast. Extensive testing on the street and at the track has enabled the folks with Dinan and Brembo to develop a custom system that has been tuned for optimum performance while avoiding some of the typical downfalls that are associated with "big brake kits," such as unbalanced proportioning, poor pedal feel and unacceptable noise levels.
Show More Show Less

Dinan - Corporate Logo
T#:597746
Part#: D290-0471-R
Back Ordered
11% off MSRP $ 7,874.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 6,999.99 USD
Free Shipping
11% off MSRP
$ 7,874.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 6,999.99 USD
Free Shipping
The Dinan by Brembo brake conversion offers the ultimate in stopping power for the most demanding driving enthusiast. Extensive testing on the street and at the track has enabled the folks with Dinan and Brembo to develop a custom system that has been tuned for optimum performance while avoiding some of the typical downfalls that are associated with "big brake kits," such as unbalanced proportioning, poor pedal feel and unacceptable noise levels.
Show More Show Less
Dinan - Corporate Logo
T#:597745
Part#: D290-0471-BD
Back Ordered
11% off MSRP $ 7,199.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 6,399.99 USD
Free Shipping
11% off MSRP
$ 7,199.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 6,399.99 USD
Free Shipping
The Dinan by Brembo brake conversion offers the ultimate in stopping power for the most demanding driving enthusiast. Extensive testing on the street and at the track has enabled the folks with Dinan and Brembo to develop a custom system that has been tuned for optimum performance while avoiding some of the typical downfalls that are associated with "big brake kits," such as unbalanced proportioning, poor pedal feel and unacceptable noise levels.
Show More Show Less
Pagid Racing - Corporate Logo
T#:553568
Part#: 1295RSL1
Back Ordered
$ 458.99 USD
Free Shipping
$ 458.99 USD
Free Shipping

The latest in the Yellow line takes all of the RSL29 characteristics and adds a bit more aggressive behavior. Friction levels go up for more initial bite and better fade resistance. Modulation and release stays close to RSL29 levels. Pad and rotor wear is a little more than on the previous Yellows but still within reasonable levels and the RSL1 is still considered an extended endurance pad. Its development stemming from GT classes at Le Mans and Nürburgring.

Since Pagid pads tend to "out-gas" we recommend using these pads with a new gas-slotted or cross-drilled rotor for the best performance. Pagid brake pads are not compatible with previously used rotors, especially if used with a carbon or Kevlar based race pad.

This item fits the following BMWs:
1995-1998 E36 BMW M3 
2001-2006 E46 BMW 330i M3 
1989-1995 E34 BMW 525i 530i 535i 540i M5 
1988-1994 E32 BMW 735i 735il 740i 740il 750il 
1997-2002 Z3 BMW M Roadster M Coupe
2006-2008 Z4 BMW M Roadster M Coupe

Show More Show Less