BMW Engine Parts for BMW Z Series E85/6 (2003-2008)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Schrick - Corporate Logo
T#:338219
Part#: TMS201492
Ships on Jan 28, 2027
$ 7,065.99

This product was last offered at the strikethrough price on
07-08-2026

Starting at $ 5,877.86 USD
Free Shipping
Starting at $ 5,877.86 USD
Free Shipping
E46 M3 Schrick 296 Degree Exhaust Camshaft with 14.0mm valve lift. This is only for use in professionally-built E46 M3 race engines. Schrick has developed this ultra-aggressive S54 race cam with 296-deg duration and 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends it be used with no VAN0S or with special custom pistons with deep valve reliefs. We strongly recommend this be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with this cam:
Schrick valve springs
Schrick rocker arms
Schrick upper and lower retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe
Show More Show Less
Schrick - Corporate Logo
T#:340424
Part#: TMS200186
Back Ordered
Starting at $ 3,261.73 USD
Free Shipping
Starting at $ 3,261.73 USD
Free Shipping
E46 M3 Schrick high-performance racing camshaft set - 288 degree intake and 280 degree exhaust. These camshafts are for use in professionally-built E46 M3 race engines. Schrick has developed these ultra-aggressive S54 race cams with 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends them be used with special custom pistons with deep valve reliefs. We strongly recommend these be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with these cams:
Schrick valve springs
Schrick rocker arms
Schrick upper (titanium) and lower (steel) retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe
Show More Show Less
Relief Valve For Media Blaster
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:640910
Part#: B1100031RELIEF
Special Order: No Guaranteed ETA
Sale - Save 25% $ 7.99

This product was last offered at the strikethrough price on
05-03-2026

$ 5.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 7.99

This product was last offered at the strikethrough price on
05-03-2026

$ 5.99 USD
Free Shipping on orders $49 and up

Schrick - Corporate Logo
T#:338223
Part#: TMS201494
Back Ordered
Starting at $ 829.00 USD
Free Shipping
Starting at $ 829.00 USD
Free Shipping
E46 M3 Schrick 288 Degree Intake Camshaft with 14.0mm valve lift. This is only for use in professionally-built E46 M3 race engines. Schrick has developed this ultra-aggressive S54 race cam with 288-deg duration and 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends it be used with special custom pistons with deep valve reliefs. We strongly recommend this be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with this cam:
Schrick valve springs
Schrick rocker arms
Schrick upper and lower retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe
Show More Show Less

Schrick - Corporate Logo
T#:340425
Part#: TMS200183
Ships on Jan 28, 2027
Starting at $ 4,865.48 USD
Free Shipping
Starting at $ 4,865.48 USD
Free Shipping
E46 M3 Schrick high-performance racing camshaft set - 304 degree intake and 296 degree exhaust. These camshafts are for use in professionally-built E46 M3 race engines. Schrick has developed these ultra-aggressive S54 race cams with 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends them be used with no VAN0S and with special custom pistons with deep valve reliefs. We strongly recommend these be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with these cams:
Schrick valve springs
New Schrick or BMW rocker arms
Schrick upper (titanium) and lower (steel) retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe
Show More Show Less
Packaged by Turner - Corporate Logo
T#:50731686
Part#: 054995LA-272KT2
Ships on Dec 18, 2026
Sale - Save 8% $ 4,392.99

This product was last offered at the strikethrough price on
05-03-2026

$ 4,032.89 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 4,392.99

This product was last offered at the strikethrough price on
05-03-2026

$ 4,032.89 USD
Free Shipping on orders $49 and up

Schrick has been dedicated to engine performance through the development of only the highest quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track, using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing.

These are a direct replacement for the stock camshafts and offer increased flow at mid and higher RPMs, thanks to 12.5mm of valve lift. Unlike 288/280 camshafts, this 280/272 set does not require upgraded valvetrain parts. The profile of these camshafts is quite close to stock CSL specs.

KIT INCLUDES

Schrick 272-Degree Exhaust Camshaft Schrick 280-Degree Intake Camshaft 24 Turner Motorsport DLC-Coated Performance Rocker Arms NOTE: Camshaft replacement requires multiple special tools. We offer the Genuine BMW Camshaft Press (T#171829) and a Schwaben Camshaft Alignment Tool Set (T#395239) to aid in installation.

Show More Show Less

Schrick - Corporate Logo
T#:338220
Part#: 0415E1040-00
Ships on Jan 28, 2027
Starting at $ 829.00 USD
Free Shipping
Starting at $ 829.00 USD
Free Shipping
E46 M3 Schrick 304 Degree Exhaust Camshaft with 12.5mm lift. This cam is much more agressive than the "standard" Schrick intake cams. A new rocker arm is required (Schrick or new BMW part #11337833259).

BMW Schrick Technical Specs Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less
Schrick - Corporate Logo
T#:200186
Part#: TMS200186
Back Ordered
$ 3,261.73 USD
Free Shipping
$ 3,261.73 USD
Free Shipping
NOW LOCATED UNDER T#340424


Water Pump Pulley
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:58782363
Part#: 11511436590
Ships on Feb 10, 2027
New Item
$ 35.99 USD
Free Shipping on orders $49 and up
$ 35.99 USD
Free Shipping on orders $49 and up
Oil Pan Bolt Set
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:54068664
Part#: 11132210959
In Stock
New Item
Sale - Save 20% $ 47.99

This product was last offered at the strikethrough price on
05-30-2026

$ 38.39 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 47.99

This product was last offered at the strikethrough price on
05-30-2026

$ 38.39 USD
Free Shipping on orders $49 and up
Front Oxygen Sensor - Bank 1 Pre-Cat
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:54780515
Part#: 11787558055
Special Order: No Guaranteed ETA
New Item
Sale - Save 10% $ 99.99

This product was last offered at the strikethrough price on
10-08-2026

$ 89.99 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 99.99

This product was last offered at the strikethrough price on
10-08-2026

$ 89.99 USD
Free Shipping on orders $49 and up


Engine Mount - Priced Each (Fits Both Left And Right Side)
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:53997750
Part#: 22116760330
Special Order: No Guaranteed ETA
New Item
Sale - Save 20% $ 65.99

This product was last offered at the strikethrough price on
05-30-2026

$ 52.79 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 65.99

This product was last offered at the strikethrough price on
05-30-2026

$ 52.79 USD
Free Shipping on orders $49 and up
Meyle - Auxiliary Belt - E46, E90, E92, E93, Z3, Z4
5X Entries Into Our F80 M3 Sweepstakes
Meyle - Corporate Logo
T#:40546016
Part#: 11287830945
Ships on Nov 2, 2026
$ 15.99 USD
Free Shipping on orders $49 and up
A high-quality, OE-style replacement serpentine belt designed to deliver reliable power to critical engine components, ensuring optimal performance and durability.
BMW - Start/Ignition/Glow plug relay
5X Entries Into Our F80 M3 Sweepstakes
Meyle - Corporate Logo
T#:40342871
Part#: 12135A06753
Ships on Nov 2, 2026
$ 58.99 USD
Free Shipping on orders $49 and up
This BMW/MINI ignition coil is designed with enhanced core windings to boost spark energy and promote a quicker, more efficient combustion. The result is improved low-end torque and increased horsepower at higher RPMs. While the exact gains depend on your engine’s condition, noticeable performance improvements and better fuel efficiency can be expected.
Show More Show Less

Pierburg - Corporate Logo
T#:380841
Part#: 11667519457
Special Order: No Guaranteed ETA
$ 225.99 USD
Free Shipping on orders $49 and up
If your vacuum pump is noisy then it is only a matter of time before it fails, leading to idling issues and a loss of braking power. Replace yours with this OEM Pierburg Vacuum Pump to ensure the smooth operation of the vacuum system.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:401689
Part#: OILTEMPGAUGEBRKK
Back Ordered
Sale - Save 2% $ 196.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.26 USD
Free Shipping
Sale - Save 2%
$ 196.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.26 USD
Free Shipping
The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.
Show More Show Less
Meyle - Accessory Belt - Z4
5X Entries Into Our F80 M3 Sweepstakes
Meyle - Corporate Logo
T#:40579781
Part#: 11287532144
Ships on Nov 2, 2026
$ 20.99 USD
Free Shipping on orders $49 and up
Recommended to be replaced at the first sign of cracking, this Meyle Accessory Belt is for the BMW Z4 and maintains function for the power steering, alternator, and A/C Compressor.

Meyle Rear Bank 1 Post-Cat Oxygen Sensor - 560mm - E70 E83 E82/88 E9X...
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:5944215
Part#: 11787545074
Ships on Nov 2, 2026
$ 116.99 USD
Free Shipping on orders $49 and up
The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. This is a Meyle oxygen sensor for BMW's with the N52, N54, and N55 3.0L engines. This 560mm bank 1 oxygen sensor is mounted after the catalytic converter. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Show More Show Less
Meyle - Auxiliary belt - Z4
5X Entries Into Our F80 M3 Sweepstakes
Meyle - Corporate Logo
T#:40546011
Part#: 11287509520
Ships on Nov 2, 2026
$ 15.99 USD
Free Shipping on orders $49 and up
A high-quality, OE-style replacement serpentine belt designed to deliver reliable power to critical engine components in BMW Z4 models, ensuring optimal performance and durability.

Meyle Oxygen Sensor - BMW F10/12/13 M S63, Z4 N52 3.0L
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:5973207
Part#: 11787539137
Ships on Nov 2, 2026
$ 102.99 USD
Free Shipping on orders $49 and up
The O2 sensor measures the amount of unburned fuel in the exhaust pipe to adjust fuel mapping for less emissions and better fuel economy. When malfunctioning, your MPG and performance can suffer. Replaced fairly easily, you can restore your performance and mileage quickly. Be sure to add anti-seize on the threads to prevent it from becoming a permanent part of the exhaust. Regularly scheduled maintenance as these tend to fail slowly.
Show More Show Less

Telescoping Magnet - Schwaben
10X Entries Into Our F80 M3 Sweepstakes
Schwaben - Corporate Logo
T#:386438
Part#: 010769SCH01A
In Stock
Sale - Save 25% $ 22.99

This product was last offered at the strikethrough price on
05-02-2026

$ 17.24 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 22.99

This product was last offered at the strikethrough price on
05-02-2026

$ 17.24 USD
Free Shipping on orders $49 and up
A durable tool for grabbing dropped fasteners, having this option could be the difference between done today and done tomorrow.
Enthusiast Bundles - Corporate Logo
T#:34919067
Part#: 019744TMS01A2KT
In Stock
$ 132.99 USD
Free Shipping on orders $49 and up

MAGNETIC FENDER COVER:

Protect your finish when working under the hood with a high quality Turner fender cover. Made from a synthetic leather layer with a goose flannelette backing for durability and protection. The Turner fender cover holds a tight grip to your fender or core support with four 9.5" magnets sewn into the top layer.


Features:

  • Durable synthetic leather with the Turner logo
  • Soft goose flannelette backing
  • Four 9.5" integrated magnets


Dimensions:

  •  Extra Long 20" x 47"


TELESCOPING LED MIRROR:

You are going to love this tool. This Schwaben telescoping lighted mirror can get you out of a jam when you need to look at something you can not see any other way. Use with or with out the mirror attached. Lighting can reflect on mirror to light at many angles. Great for finding missing parts beneath engine block or oil leaks.

Features:

  • Handy pocket clip
  • Pivoting quick attach mirror for perfect viewing at any angle.
  • Extends up to 26 1/4" for hard to reach places.
  • Collapsed length 6.5" without mirror attached, 9.5" with 
  • High quality mirror provided a perfect reflection.
  • Easy on and off. Turns on when extended and off when collapsed.
  • 44,000 MCD brightness.
  • Long life span up to 100,000 hours on LED bulb.
  • Operates on 3 AG3/LR41 batteries 
  • Includes batteries


TELESCOPING MAGNET:

This Schwaben telescoping magnet is a great addition to any tool box. Magnet is rated to pickup 3.5 lbs. Stainless steel shaft is 7" collapsed and 26" extended. Magnet is encased in a aluminum sleeve to help prevent side of magnet from sticking. Cushion grip rubber handle works great with dry or oily hands.


MAGNETIC PARTS TRAYS:

Stop losing nuts, blots, and screws. The Schwaben magnetic parts tray has a large 4-3/8 inch diameter stainless steel bowl with a rubber-coated magnetic base that won't mar painted surfaces.

Attach the tray to any ferrous metal on the vehicle, and toss in your steel fasteners as you remove them. The magnet holds them safely in place until you are ready to use them again. Works right side up or inverted for under-car repairs.

A simple, effective solution to a common problem.


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
Bremmen Parts - Corporate Logo
T#:47439371
Part#: 02SB1815
Ships on May 7, 2027
Sale - Save 39% $ 3.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2.44 USD
Free Shipping on orders $49 and up
Sale - Save 39%
$ 3.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2.44 USD
Free Shipping on orders $49 and up

Easily add an oxygen sensor to your custom exhaust setup with this universal O2 sensor bung. Designed for simple weld-on installation, it allows you to place your sensor exactly where you need it—perfect for custom builds, exhaust modifications, or performance tuning projects.

Features:

CNC-cut from T304 Stainless Steel for corrosion resistance
Threaded for M18x1.5mm RH oxygen sensors

Show More Show Less


URO Valve Cover Nut W/ Seal & Washer - BMW S54 3.2L
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:43750222
Part#: 11127838075
Back Ordered
$ 7.99 USD
Free Shipping on orders $49 and up
Replacement valve cover nut for your BMW's S54 valve cover
CP-Carrillo Forged Piston Set - M54B28 Std. Size
For Vehicles With M54B25 Engine Only
5150 Autosport - Corporate Logo
T#:26071892
Part#: M54B25-CPP-84
Back Ordered
Starting at $ 2,206.98 USD
Free Shipping on orders $49 and up
Starting at $ 2,206.98 USD
Free Shipping on orders $49 and up
CP-Carrillo sets the benchmark for premium aftermarket forged pistons. Crafted with high-strength, lightweight materials and cutting-edge engineering, this BMW M54B25 piston set boasts the following features: Lightweight Design: Constructed from forged aluminum alloy, CP-Carrillo pistons offer reduced weight, enhancing engine responsiveness and acceleration for a dynamic driving experience. Advanced Engineering: Leveraging state-of-the-art technology, CP-Carrillo engineers optimize combustion, fuel efficiency, and power output, ensuring peak performance in every application. Wide Configuration Range: With a variety of bore sizes and compression ratios available, CP-Carrillo provides options to tailor pistons to specific engine builds and performance objectives. Quality Construction: Each CP-Carrillo piston undergoes precision machining and rigorous testing to meet exacting standards, guaranteeing consistent quality and performance in every set. Engineered by one of motorsport's most respected names, CP-Carrillo pistons are the ultimate choice for the M54B25 engine, whether for street performance or track dominance. Piston Sets Include: Pistons Rings Pins Locks Spec Sheet Optional Extras: Skirt Coating - Adding a Protective Layer Between the Sides of the Piston and Cylinder Walls Dome Coating - Adding a Protective Layer to the Top of The Piston HD-Wrist Pins - A Must if You are Planning on Going Beyond 850 HP! X Forging - Reducing Rotational Mass By Moving the Wristpin Inwards and Shortening it While Increasing Overall Strength Please Note: It is essential to have all engine modifications performed by a qualified professional to ensure proper installation and optimal engine performance, safety, and reliability.
Show More Show Less
5150 Autosport - Corporate Logo
T#:26204927
Part#: CAR-CRS-S54-XT
Back Ordered
$ 2,299.99 USD
Free Shipping on orders $49 and up
The 5150 AutoSport Pro-Xtreme Connecting Rods, made by CP-Carrillo, are designed to handle extreme horsepower and high RPM applications for BMW S54 engines with 139 mm Rods. Constructed from high-strength, aircraft-grade steel, these connecting rods are engineered to withstand the forces generated by high-powered engines. The Pro-Xtreme design is specifically tailored to handle up to 2000 horsepower, making these rods suitable for high-performance turbo/drag racing or street/strip applications. They are also designed to handle high engine speeds of up to 9500 RPM, which is necessary for achieving maximum power output. Each connecting rod is precisely fabricated to meet the demands of high-performance engines using advanced manufacturing techniques such as computer-aided design (CAD) and finite element analysis (FEA). The Pro-Xtreme Connecting Rods are designed to be durable, reliable, and capable of handling the extreme stresses and forces generated by high-horsepower and high-rpm engines.
Show More Show Less

URO - Corporate Logo
T#:33679726
Part#: 12147539165
In Stock
$ 18.99 USD
Free Shipping on orders $49 and up

URO Camshaft Position Sensor is a premium replacement component specifically designed for BMW vehicles, ensuring optimal engine performance and reliability. Manufactured by Turner Motorsport, this camshaft position sensor plays a crucial role in maintaining accurate timing and enhancing overall engine efficiency. By upgrading to the URO Camshaft Position Sensor, BMW owners can expect improved engine responsiveness and a significant reduction in potential diagnostic trouble codes.

  • Enhanced Engine Performance: Ensures precise timing and efficient engine operation, contributing to superior overall performance.
  • Durable Construction: Crafted from high-quality materials that withstand extreme conditions for long-lasting durability.
  • Easy Installation: Designed for a direct fit, facilitating straightforward installation for both professionals and DIY enthusiasts.
  • Reliable OEM Replacement: Matches OEM specifications, providing peace of mind and preserving the integrity of the vehicle.
Show More Show Less

Glyco - Corporate Logo
T#:374670
Part#: 11211706849
Back Ordered
$ 177.99

This product was last offered at the strikethrough price on
05-07-2026

$ 172.99 USD
Free Shipping
$ 172.99 USD
Free Shipping
Standard bore
Oil Cap
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:591528
Part#: 11127509328
In Stock
$ 6.51 USD
Free Shipping on orders $49 and up
Includes the sealing gasket

Glyco - Corporate Logo
T#:374672
Part#: 11211706852
Back Ordered
$ 111.99

This product was last offered at the strikethrough price on
05-07-2026

$ 108.99 USD
Free Shipping
$ 108.99 USD
Free Shipping
59.75MM(+0.25) bore
Complete Fuel Injector Set
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15677494
Part#: 13537528539-KT
Back Ordered
Sale - Save 3% $ 876.99

This product was last offered at the strikethrough price on
05-03-2026

$ 849.89 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 876.99

This product was last offered at the strikethrough price on
05-03-2026

$ 849.89 USD
Free Shipping on orders $49 and up
A vehicle with dirty injectors may host a wide variety of symptoms. From stalling, hesitation, misfiring, and a rough idle, to the wide open throttle woes. If your vehicle is suffering from these symptoms, the fuel injectors may be the cause.
Show More Show Less

Forge - Corporate Logo
T#:370919
Part#: VC04B
In Stock
$ 14.99 USD
Free Shipping on orders $49 and up
Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter. 

Corteco - Corporate Logo
T#:596700
Part#: 11349064457
Back Ordered
$ 8.99 USD
Free Shipping on orders $49 and up
This kit includes seals that can be used on either intake or exhaust valves
5150 Autosport - Corporate Logo
T#:26171645
Part#: CP-FPS-S54-XT
Back Ordered
Starting at $ 2,268.98 USD
Free Shipping on orders $49 and up
Starting at $ 2,268.98 USD
Free Shipping on orders $49 and up
CP-Carrillo sets the benchmark for premium aftermarket forged pistons. Crafted with high-strength, lightweight materials and cutting-edge engineering, this BMW S54 piston set boasts the following features: Lightweight Design: Constructed from forged aluminum alloy, CP-Carrillo pistons offer reduced weight, enhancing engine responsiveness and acceleration for a dynamic driving experience. Advanced Engineering: Leveraging state-of-the-art technology, CP-Carrillo engineers optimize combustion, fuel efficiency, and power output, ensuring peak performance in every application. Wide Configuration Range: With a variety of bore sizes and compression ratios available, CP-Carrillo provides options to tailor pistons to specific engine builds and performance objectives. Quality Construction: Each CP-Carrillo piston undergoes precision machining and rigorous testing to meet exacting standards, guaranteeing consistent quality and performance in every set. Engineered by one of motorsport's most respected names, CP-Carrillo pistons are the ultimate choice for the S54 engine, whether for street performance or track dominance. Piston Sets Include: Pistons Rings Pins Locks Spec Sheet Optional Extras: Skirt Coating - Adding a Protective Layer Between the Sides of the Piston and Cylinder Walls Dome Coating - Adding a Protective Layer to the Top of The Piston HD-Wrist Pins - A Must if You are Planning on Going Beyond 850 HP! X Forging - Reducing Rotational Mass By Moving the Wristpin Inwards and Shortening it While Increasing Overall Strength Please Note: It is essential to have all engine modifications performed by a qualified professional to ensure proper installation and optimal engine performance, safety, and reliability.
Show More Show Less
Hitachi - Corporate Logo
T#:48815470
Part#: 12141709616
Back Ordered
$ 32.99 USD
Free Shipping on orders $49 and up
NOTE: Does not include o-ring seal - see BMW # 12141748398 This is the crankshaft position sensor. It provides information for the ECU. A faulty sensor can cause issues with timing adjustment and limit performance and vehicle operation. Replace your sensor with a high-quality Hitachi sensor to restore peak performance.
Show More Show Less


JE Piston - Corporate Logo
T#:27171928
Part#: 297120
Back Ordered
$ 1,324.99 USD
Free Shipping on orders $49 and up
JE Pistons Forged Piston Set of 6 – 87.5mm Bore – 11.5:1 CR – BMW E46 M3 S54B32 Maximize the performance of your BMW E46 M3’s S54B32 engine with this set of 6 JE forged pistons. Engineered for strength and high-revving capability, these pistons are built to withstand the demands of high-performance applications. 87.5mm Bore: Increased bore size for improved displacement and power output. Compression Ratio: 11.5:1: High-compression design enhances combustion efficiency and delivers more horsepower and torque. Forged Aluminum: Lightweight and durable, designed to handle high stress and heat, making it perfect for both street and track use. Precision Fit: Ensures seamless installation and compatibility with the BMW S54B32 engine, providing reliability under extreme conditions. Perfect for serious performance builds, these pistons offer a balance of durability, power, and efficiency.
Show More Show Less
Meyle Oxygen Sensor - Pre-Cat Bank 2 - E9X E60 E82 N52
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:5944212
Part#: 11787558073
Back Ordered
$ 123.99 USD
Free Shipping on orders $49 and up
Bad oxygen sensors can cause check engine lights and poor fuel mileage. Replace your faulty sensor with this high-quality Meyle sensor to turn off your check engine light and restore fuel mileage. This is a Meyle oxygen sensor for BMWs with the N52 engine. This sensor is mounted in the rear downpipe before the catalytic converter. Replacement for BMW # 11787558073 and 11787537984. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Show More Show Less
Febi - Corporate Logo
T#:56291018
Part#: 11318648732
Special Order: No Guaranteed ETA
New Item
$ 276.99 USD
Free Shipping on orders $49 and up
Keep your engine running at peak performance with this comprehensive Febi Bilstein Timing Chain Kit.

Rear Crankshaft Seal
For vehicles with production date up to 01/2009
Victor Reinz - Corporate Logo
T#:13430825
Part#: 11117584398
Back Ordered
$ 16.31 USD
Free Shipping on orders $49 and up
$ 16.31 USD
Free Shipping on orders $49 and up
90x110x12mm - usually replaced when servicing the timing chains The front seal or crankshaft seal is one of the most difficult to replace. However, they often fail, and when they do, your car will be marking it's territory with little oil drops wherever you park. Apart from making a mess, it can also cause oil to come in contact with the pulley surfaces. Replace yours and keep your oil in your engine. The perfect time to replace this seal is when you are doing a timing replacement. You already have everything apart, so you might as well add this piece even if it hasn't failed yet as a bit of preventative maintenance.
Show More Show Less

Engine Oil Pan Kit
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:556690
Part#: 11137552414
Ships in 4 Business Days
$ 580.99

This product was last offered at the strikethrough price on
08-13-2026

$ 568.99 USD
$ 568.99 USD
JE Piston - Corporate Logo
T#:33646293
Part#: 297119S
Back Ordered
$ 299.99 USD
Free Shipping on orders $49 and up
The 12.5:1 compression JE piston for the S54b32 is designed to help maintain thermal efficiency and minimizes weight. Detail: 12.5:1 Compression 87.00 mm Bore – 1.271 in. CH, -8.70 CC

Ajusa - Corporate Logo
T#:45963169
Part#: 24030200
Back Ordered
$ 4.99 USD
Free Shipping on orders $49 and up
This intake gasket goes between the cylinder head and the intake runners and should be replaced anytime the intake manifold is removed from the engine.
Febi - Corporate Logo
T#:56291040
Part#: 11367522288
Special Order: No Guaranteed ETA
New Item
$ 142.99 USD
Free Shipping on orders $49 and up
Keep your BMW’s VANOS system functioning at its peak with this Febi Bilstein Intake Camshaft Adjuster.

Starter Mounting Hardware
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:594380
Part#: 12410392577
Ships in 2 Business Days
$ 10.99 USD
Free Shipping on orders $49 and up
Modern starter and water pump fasteners are torque-to-yield, meaning they stretch and can only be safely used once. Replace your hardware for peace of mind.

Febi - Corporate Logo
T#:56724707
Part#: 24152333907
Special Order: No Guaranteed ETA
New Item
$ 85.99 USD
Free Shipping on orders $49 and up
Maintain peak performance and protect your BMW's transmission under demanding driving conditions with the Febi Bilstein automatic transmission oil sump.
JE Piston - Corporate Logo
T#:33646299
Part#: 297170S
Back Ordered
$ 299.99 USD
Free Shipping on orders $49 and up

JE Pistons BMW S52B32 USA Piston – 86.50 mm Bore – 1.220 in. CH, -25.10 CC is an exceptional choice for BMW enthusiasts seeking to boost their engine's performance. Offered by Turner Motorsport, this high-quality piston is specifically engineered for the BMW S52B32 engine, ensuring a precise fit and enhanced reliability. Its optimized design significantly increases compression, resulting in improved horsepower and torque for both racing and daily driving.

  • Increases compression ratio for better power output
  • Lightweight construction enhances overall engine performance
  • Designed for durability and longevity in high-stress environments
  • Ensures a perfect fit for the BMW S52B32 engine
  • Ideal for both competitive racing and everyday driving scenarios
Show More Show Less


Corteco - Corporate Logo
T#:596682
Part#: 11120030496
Back Ordered
$ 23.99

This product was last offered at the strikethrough price on
08-13-2026

$ 21.99 USD
Free Shipping on orders $49 and up
$ 21.99 USD
Free Shipping on orders $49 and up
Keeping the oil inside your engine is extremely important to performance. Between oil change intervals, your oil can dip to dangerous levels if there is a leak you may not be aware of. The valve cover is an extremely common place for this to happen. Years of exposure to extreme temperature change degrades the gaskets and causes failure. Replace yours to keep your engine oil in your vehicle.
Show More Show Less
Ina - Corporate Logo
T#:42301987
Part#: ZC0128
Back Ordered
$ 13.99 USD
Free Shipping on orders $49 and up
Keep your BMW’s heart pumping strong, use the INA Oil Pump Chain to replace your stetched and worn out oil pump chain to ensure your engines oiling system is operating at peak performance.