Engine bearings ensure that the rotating assemblies spin smoothly ensuring optimal performance and longevity. As the engine ages, these bearings can become worn and thin which allows excess play and increased wear. If the engiine becomes oil-starved, the bearing will become dry, heat up and spin around the shaft for a total failure. Turner carries Genuine BMW and high quality aftermarket and performance options to suit your individual needs.
Achilles Motorsports uses an extremely hi-tech Dry Film Lubricating process that will keep friction to a minimum allowing your engine to rev faster without worry while keeping oil temperature lower. Perfect for high-performance street, sprint, or endurance racing engines, this specialized coating protects vital engine bearings on dry engine starts and during extreme temperatures and high RPM operation. This specialized coating is the same process that is the choice of professional engine builders around the world, used on all NASCAR, ALMS, and Grand-Am engines. Achilles' bearings provide increased insurance against mechanical thermal breakdown compared to the OEM type bearing, showing much less wear during routine inspections. Note For high-performance and racing engines, we strongly recommend upgrading the OEM type connecting rod bolts to an ARP Connecting Rod Bolt Set to keep your bearing and caps tight even under the most extreme conditions, eliminating potential walk and bearing problems. As with all racing and performance bearings, professional installation is required. Please check all clearances as per the manufactures specifications.
Show More Show Less
Made in Belgium, Cat Cams offer great performance at a reasonable price. Cat Cam offers cams in most popular enthusiast upgrade specs to ensure there is a option for what ever your power goal is. The included rocker arm kit consist of: - 24x "CAT031" rocker arm, steel billet, coated - 1x oil connector bridge - rocker arms with 0.5mm oil jet hole towards the cam/follower contact area - rocker arm shafts need to be drilled at each rocker arm (in the groove already present) - rocker arm shafts need to be drilled at oil bridge connector (no need to make extra groove, connector has internal groove) - intake rocker arm shaft needs front plug to close - intake rocker arm shaft has no oil feed so an oil bridge is required to connect the intake/exhaust rocker arm shafts *Please note that the factory cams ave a pressure regulator valve that needs to be removed and installed in the new cams*
Show More Show Less
