Subframe for BMW Z Series E85/6 (2003-2008)

Clear BMW chassis

Please ensure your correct model is selected

Subframe bushings are a common failure point on BMWs - replace these to refresh your BMW.

Sub-Categories

Sort By:

Turner Motorsport - Corporate Logo
T#:581
Part#: TDR4680014
In Stock
Sale - Save 25% $ 443.99

This product was last offered at the strikethrough price on
06-13-2026

$ 332.99 USD
Free Shipping
Sale - Save 25%
$ 443.99

This product was last offered at the strikethrough price on
06-13-2026

$ 332.99 USD
Free Shipping
Made in the USA The rear subframe is the heart of the BMW rear suspension. Not only do all of the suspension arms attach to it, the driveline runs through it via the differential and half-shafts. Therefore, a track-prepped E46 should never see any flex or deflection in any of the subframe mounts. Excessive movement here transfers to unwanted suspension motions elsewhere and is also a major contributor to failures in the rear floor sheetmetal.

While our Delrin-Aluminum subframe mounts conform to various racing series these all-aluminum mounts are the ultimate in reducing flex and deflection. The rubber stock mounts, and the Delrin mounts to a small degree, flex and deflect as various forces are applied throughout the subframe - on and off throttle loading, cornering on flat surfaces, bumpy surfaces, weight transfer, sticky race tires, etc. Too much flex from worn rubber mounts will transfer to flex where the subframe meets the chassis/floor. This is the primary cause for the infamous rear subframe failure. These fully solid aluminum mounts have absolutely zero flex to them so they will not contribute to rear subframe issues. The Turner E46 Reinforcement Kit is still recommended.

These solid subframe mounts were designed for racing use only, where we won several sports car championships in the Grand-Am Cup series. These subframe mounts are over-engineered to be a major improvement over the stock subframe mounts not only for performance but also in strength as well. The aluminum is CNC machined for a precise fit and minimal weight. One front bushing is slotted to allow for BMW's manufacturing tolerances. Professional and experienced installation is required.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2001-2006 SpecE46 BMW 330i 330ci
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
Show More Show Less
OEM Lemforder Rear Subframe Mount (Rear Mount) - E46 non-M
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Lemforder - Corporate Logo
T#:12734
Part#: 33316770781
In Stock
$ 27.29

This product was last offered at the strikethrough price on
07-21-2026

$ 24.95 USD
Free Shipping on orders $49 and up
$ 24.95 USD
Free Shipping on orders $49 and up
The subframe provides mounting for your control arms, engines, and transmission. Where the subframe connects to the body are bushings. These bushings absorb any vibration that would normally be transmitted to the cabin and keep the subframe solid. They also provide a solid mounting location to keep everything tight. If there is excessive vibration in your cabin or a clunk or knock when going over bumps, the problems may be your subframe bushings. By replacing them with new units, everything will stay tighter and provide a more secure mounting location for your lower control arms, engine, and transmission.
Show More Show Less
OEM Lemforder Rubber Mounting Front Right - 33316770816 - E85,E89 ...
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Lemforder - Corporate Logo
T#:398965
Part#: 33316770816
In Stock at Vendor
$ 51.99

This product was last offered at the strikethrough price on
05-07-2026

$ 50.00 USD
Free Shipping on orders $49 and up
$ 50.00 USD
Free Shipping on orders $49 and up

Exposure to the elements and stress/pressure can lead to failing and splitting subframe bushings. Ensure your subframe is mounted perfectly steady to prevent vibrations, knocks, suspension issues, and potential damage to the body of the vehicle or suspension components. OEM Lemforder is the perfect replacement to make sure that everything is mounted properly.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
E85,E86,E89 Z4

Show More Show Less

OEM Lemforder Front Left Rear Subframe Bushing - Z4 BMW
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Lemforder - Corporate Logo
T#:398927
Part#: 33316770815
In Stock at Vendor
$ 51.99

This product was last offered at the strikethrough price on
05-07-2026

$ 50.00 USD
Free Shipping on orders $49 and up
$ 50.00 USD
Free Shipping on orders $49 and up

Exposure to the elements and stress/pressure can lead to failing and splitting subframe bushings. Ensure your subframe is mounted perfectly steady to prevent vibrations, knocks, suspension issues, and potential damage to the body of the vehicle or suspension components. OEM Lemforder is the perfect replacement to make sure that everything is mounted properly.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Febi Rear Subframe Bushing - E46, E83, Z4
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:363818
Part#: 33316770781
In Stock
Sale - Save 51% $ 30.94

This product was last offered at the strikethrough price on
04-16-2026

$ 15.12 USD
Free Shipping on orders $49 and up
Sale - Save 51%
$ 30.94

This product was last offered at the strikethrough price on
04-16-2026

$ 15.12 USD
Free Shipping on orders $49 and up
Rear position of the subframe, 2 required per car
BMW Axle Beam Mount
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:38419081
Part#: 33316760688
Special Order: No Guaranteed ETA
$ 42.99 USD
$ 42.99 USD
The rear subframe bushings play a crucial role in your vehicle's performance and handling. They are responsible for transferring load and strain between the drivetrain and rear suspension. Worn subframe bushings can significantly affect the effective transfer of power to the ground.
Show More Show Less