BMW Intake Parts for BMW Z Series E85/6 (2003-2008)

BMW E46 Crankcase Pressure Regulator Valve | S54 3.2L Engine is a crucial component that ensures proper crankcase ventilation by regulating oil vapor flow into the intake manifold, preventing excessive oil consumption and buildup. Designed specifically for BMW E46 models with the S54 3.2L engine, this valve helps maintain engine efficiency and performance. BMW engines are known to experience oil separator freezing in cold weather if not fully warmed up, which can lead to howling noises and oil leaks. To ensure a thorough repair, replacing the valve cover gasket when changing the separator is highly recommended.

• Regulates crankcase pressure to prevent excessive oil consumption
• Helps maintain proper engine ventilation for peak performance
• Reduces the risk of oil separator freezing and associated leaks
• Direct-fit replacement for BMW E46 models with S54 3.2L engine
• High-quality materials ensure durability and long-lasting performance
• Recommended to replace the valve cover gasket for a complete repair

Protect your BMW's engine from excessive oil consumption and leaks by replacing a failing crankcase pressure regulator valve with this premium-quality replacement.

Replacement OEM Hella mass air sensor for M54 3.0-liter Engine. Measures the amount of air flow to correctly adjust the fuel to air ratio for optimal performance. Faulty mass air sensors can give improper readings and leading to performance loss. This is a stock HFM and is a BMW replacement for part # 13627566983. 3.5" diameter.

Hella is a premium manufacturer that supplies automotive parts to numerous car brands across the world. Everything from electrical to mechanical genuine parts have been made and supplied directly to BMW before the vehicles ever leave the production floor. Their high quality, long lasting parts have made them a trusted brand chosen to help keep your BMW on the road for many years to come.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Complete Application List:
2003-05 E46 325i, 325Ci - M56 engine only (SULEV)!
2003-05 E46 330i, 330Ci
2004-06 E83 X3 3.0i - M54 engine
2003-2006 E85 Z4 3.0i Roadster

Introduced in the late 1990s, the DISA (Differenzierte Sauganlage or differentiated intake system) valve plays a crucial role in adjusting the intake manifold's effective length. This mechanism incorporates a flap that opens and closes in response to DME inputs, optimizing airflow for both high and low RPM use.

Although the DISA system marked a significant leap in engine efficiency, it has become a common point of failure in older BMW models. The flap is secured to the body using a plastic pin, prone to degradation over time due to heat exposure. A malfunctioning DISA valve can lead to various issues, ranging from power loss to severe engine damage.

Signs of DISA valve failure include:

Audible rattling from the upper intake manifold. Power loss during different RPM/load conditions. Decreased fuel efficiency due to improper flap operation or valve failure. Illuminated SES/Service Engine Soon light, indicating lean/rich conditions or misfires (common DTCs include: P1083, P1084, P1347, P1348). Potential valvetrain damage as a result of flap pin failure, leading to plastic and metal debris circulating in the engine. If you notice any of these symptoms, it's crucial to replace the DISA valve promptly to avoid further engine complications. Continued use with a faulty DISA valve can escalate to extensive engine repairs or replacement.

Fortunately, Febi-Bilstein offers a high-quality OE DISA valve designed for seamless integration, ensuring optimal fit, finish, and functionality. Installing this valve is straightforward, requiring basic hand tools and less than an hour of your time. Restore your engine's performance and safeguard against major damage by upgrading to a new DISA valve from Febi-Bilstein.

A bad DISA valve can cause a variety of issues, from a loud racket in the engine bay, hesitation at low rpm and a rough idle with lean codes.

If the valve is making a loud noise, we recommend replacing it as soon as possible. It is possible for the pin holding the flap to be sucked into the motor causing serious damage.

Very easy to replace, just need to undo the 4 bolts holding it to the intake manifold.

Ensure your vehicle maintains optimal fuel efficiency and performance by swiftly replacing the Mass Airflow Sensor (MAF). This crucial component regulates fuel delivery through injectors based on incoming air volume. A faulty MAF can significantly impact gas mileage and overall performance.

Gradual MAF failure often results in reduced fuel efficiency and performance degradation. Complete failure may cause stuttering and stalling, forcing the vehicle into a limp mode. A simple diagnostic test involves unplugging the MAF connector before starting the car; improved idling indicates a faulty MAF requiring replacement.

Failure to replace the MAF leads to excessive fuel consumption and inefficient burning, adversely affecting fuel economy. Opt for a Genuine BMW MAF replacement to ensure stock-quality performance and enhance vehicle efficiency.

Ensure smooth idling for your BMW's M50, M52, or M54 engine with the Turner Motorsport Genuine Idle Control Valve. This essential component, located in the intake system, plays a crucial role in regulating the engine's idle speed and air intake.

• Genuine BMW part ensures quality and compatibility
• Prevents idle issues and irregular engine behavior
• Optimizes engine performance and fuel efficiency
• Easy replacement for hassle-free maintenance

A faulty throttle body can cause poor engine operation or even complete failure to function. Replace your malfunctioning throttle body with a high quality OEM VDO unit to restore proper engine operation. 

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Upgrade your BMW E46 330i, 330Ci, Z4 3.0i, X3 M54 3.0L engine's performance with the Turner Motorsport Genuine Mass Air Flow Sensor (MAF). This essential component controls the fuel injection process by regulating the air intake volume. Ensure optimal engine efficiency and fuel economy by replacing a damaged or poorly maintained MAF.

• Genuine BMW part guarantees quality and compatibility
• Regulates fuel injection for improved engine performance
• Maintains optimal air-to-fuel ratio for efficient combustion
• Enhances throttle response and overall drivability