BMW Cooling System Parts & Accessories for BMW Z Series E85/6 (2003-2008)

The cooling system is a weak point on any E46. Many cars develop issues in as few as 50,000 miles.

Overheating an inline 6 engine almost always results in large repair bill, and sometimes a warped cylinder head.

Replace yours with a high-quality OEM Nissens radiator to prevent further issues and potential overheating.

Tired of dealing with brittle, dry-rotted rubber hoses? Whether you're refreshing your cooling system or replacing aging components, this ECS Silicone Radiator Coolant Hose Set is the ultimate upgrade. Designed for durability, performance, and a factory-perfect fit, these premium silicone hoses outperform standard rubber in every way.

Why Choose Silicone Over Rubber?

Made from heavy-duty, reinforced 4-ply fluorosilicone, ECS hoses withstand extreme temperatures and pressures far beyond OEM rubber hoses. Engineered to resist oil, fuel, and electrochemical degradation, these hoses are tested for continuous operation at 250°F and over 45 psi, delivering superior reliability, reduced turbulence, and improved coolant flow.

Key Benefits:

Direct OE Fitment – Perfectly molded to factory specifications for seamless installation. Enhanced Durability – Heat-resistant silicone prevents cracking, swelling, and deterioration over time. Superior Cooling Performance – Smoother internal passageways improve coolant flow and system efficiency. Pre-Installed Quick-Connect Fittings – Hassle-free installation with OEM-style connectors. Premium Hardware Included – Comes with German-style stainless steel worm-drive hose clamps for a secure fit. Kit Includes:

Upper Radiator Hose Lower Radiator Hose Pre-Installed Factory "Quick-Connect" Flanges (4) Stainless Steel Worm-Drive Hose Clamps (4) Replaces OEM Part Numbers: 17127531579 & 17127564478

Replace your cracked or leaking radiator hose to prevent further leaks and potentially catastrophic failure.

Genuine BMW radiator hoses are always a perfect option when performing maintenance thanks to their high quality and longevity.

This item fits the following BMW Chassis:
E85,E86

Fits BMW Engines including:
N52

Engine running a little hot or is the temp gauge not telling you anything? The thermostat might be the likely problem. Many cooling issues start with the thermostat. This is electronically controlled by the engine computer based on the cooling demands from the engine. And cooling components are working harder than ever. Engine performance is also dependent on temperature - as temperatures rise and pass a certain threshold the engine computer will begin reducing power. Stay on top of your cooling maintenance by replacing critical components preventatively. This replacement thermostat fits many of the N51 N52 N53 N54 6 cylinder engines and is an OEM Behr part.  

The thermostat is located along with the water pump on the side of the engine. To gain access for removal you may need to remove the water pump as well. If the water pump is removed you MUST replace its mounting bolts. You can add them from the options below. We also have a bundled package that includes the water pump, mounting screws, connecting hose, and clamps if you want to replace everything together (recommended).  

For the following BMW engines:
N54 N52

Genuine BMW Water Pump And Thermostat Kit is designed to address the common issue of water pump failure in BMW models around 80,000 miles. This comprehensive kit provides everything needed for a seamless water pump and thermostat replacement, ensuring your BMW continues to perform at its best without leaving you stranded.

This kit includes a Genuine BMW water pump, thermostat, coolant, and all necessary mounting hardware, offering a reliable solution to restore your engine's cooling system. Perfect for preventative maintenance, this Genuine BMW kit helps prevent overheating and ensures optimal engine performance.

• Genuine BMW parts for precise fitment and reliability
• Complete kit for water pump and thermostat replacement
• Helps prevent common water pump failures around 80,000 miles
• Includes all required mounting hardware for easy installation
• Enhances engine cooling efficiency and longevity

The N5X family of engines marked the start of a new era for BMW. The all-new aluminum block powerplants featured a host of technical upgrades, aiding in power output, reliability, and performance. Among these technological advances is an external electronic water pump, which removed load from the engine's accessory drive and allowed for advanced pulse-width-modulated (PWM) control.

From factory, the N52's electronic water pump is limited to a measly 200W output—strong enough for daily driving, but lacking in performance applications. Recognizing this shortcoming, ECS engineers set out to create a high-flow water pump upgrade that doesn't break the bank. Their high-quality adapter wiring harness and bracket allow you to install a 400W N54 water pump without any modification, an effortless, yet effective upgrade that doubles the output of the factory water pump!

By increasing coolant flow capacity, the 400W pump improves heat extraction from the cylinder head and engine block during high-load operation. This added thermal headroom is particularly beneficial for modified engines, sustained aggressive driving, track use, or operation in elevated ambient temperatures where the factory pump can operate near its limits. Improved circulation helps maintain more stable coolant temperatures and reduces the risk of localized hot spots.

Features & Benefits:

Upgrades to the more powerful 400W N54 water pump for increased coolant flow and improved engine cooling efficiency Sealed adaptor harness ensures secure connections and optimal operation under demanding conditions The N54 pump's higher power output offers longer-lasting, more effective cooling compared to the stock N52 pump Design:

40A fused power wire safely handles the increased power demands of the N54 pump, providing consistent and stable performance Sealed and robust construction, designed to withstand heat and moisture, ensuring reliability in even the most challenging environments Plug-and-play compatibility is designed for easy integration with the N52 engine and N54 water pump, minimizing installation time and complexity Kit Contents:

ECS N54 Water Pump Adapter Kit Conversion wiring harness Aluminum bracket Installation hardware Pierburg Full Aluminum Water Pump (11515A05704) Installation:

- Click HERE for Installation Instructions -