Febi for BMW Z Series E85/6 (2003-2008)

After the introduction of the M52TU/M54 engines, BMW observed an uptick in CCV-related issues, especially in cold regions. Vehicles operating in extremely low temperatures often encountered a blockage in the CCV dipstick hose, leading to elevated crankcase pressure and visible blue smoke from the exhaust. To address this issue, BMW introduced cold climate-specific hoses with foam insulation, preventing condensation and facilitating quicker oil warm-up. This kit incorporates top-notch reproduction cold climate hoses to ensure optimal CCV performance across all weather conditions.

The crankcase ventilation valve, known as the oil separator, PCV, CCV, or crankcase pressure regulator valve, plays a vital role in redirecting oil from your vehicle's intake system back into the engine oil pan. This system comprises numerous plastic and rubber hoses, prone to damage due to prolonged exposure to chemicals and heat.

Designed to tackle or prevent impending CCV system failures, this kit includes four foam-insulated hoses made from durable plastic capable of withstanding heat fluctuations and chemical exposure. Additionally, a new ventilation valve is included for a comprehensive and long-lasting repair solution.

Signs indicating the need for crankcase ventilation system replacement include:

Whistling sounds from the intake manifold, caused by crankcase pressure venting through holes in the CCV hoses. Blue smoke emitting from the tailpipe, indicating oil consumption. Excessive oil usage. Milky or yellowish buildup under the oil cap, suggesting condensation due to ventilation valve malfunction. If you're experiencing misfires, lean fuel codes, decreased fuel efficiency, or noticeable oil consumption, it's advisable to overhaul your crankcase ventilation system. Opt for this reliable system from Febi-Bilstein for a repair that meets factory standards and ensures consistent performance.

The wheel hub assembly, often underestimated, plays a vital role in your vehicle's performance. This component connects the wheel to the chassis and incorporates metal wheel bearings responsible for wheel rotation while the car is in motion.

Over time, these assemblies can wear out and require replacement. Professional servicing can be expensive, so why not tackle this task in your own garage?

Found on the front door jamb, this actuator controls the door's locking/unlocking and latching/opening functions. If your door locks work intermittently, or if you're experiencing a sticky latch, it's time to replace your door latch.

This OE replacement from Febi-Bilstein is constructed from high-quality materials designed to match or outperform the functionality of its Genuine counterpart.

If you plan on replacing your front door lock actuator, choose Febi-Bilstein for a lasting, cost-effective repair that is proven to last.

This is a replacement power steering fluid reservoir. Why replace the reservoir? Because the connection between the reservoir tank and the hoses is one of the prime locations for power steering leaks on these cars. It's mostly due to the style of clamp that BMW used. But also any replacement clamps are usually over-tightened on these plastic reservoir nipples. There is also a filter inside the reservoir that cannot be changed or serviced. So it's a good idea to replace the tank and get a new filter at the same time. With fresh fluid and a clean filter you might be able to restore some steering smoothness and precision to your BMW! Alternate part number - 32416851217. Reservoir includes new cap with o-ring. 

This item fits the following BMWs: 
1984-1991 E30 3 Series BMW 318i 318is 318ic 325e 325es 325i 325is 325ix 325ic M3 
1992-1998 E36 3 Series BMW 318i 318is 318ic 318ti 323i 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 
1999-2005 E46 3 Series BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 
1989-1995 E34 5 Series BMW 525i 530i 535i 540i 
1997-2003 E39 5 Series BMW 525i 528i 530i 540i 
2004-2010 E60 5 Series BMW 525i 525xi 528i 528xi 530i 530xi 545i 550i - not for cars with active steering or dynamic drive 
2004+ E63 6 Series BMW 645ci 650i - not for cars with active steering or dynamic drive 
1989-1994 E32 7 Series BMW 735i 740i - not for cars with self leveling suspension 
1995-2001 E38 7 Series BMW 740i 740il - not for cars with self leveling suspension 
2004-2006 E83 X3 BMW X3 2.5i X3 3.0i 
2000-2006 E53 X5 BMW X5 3.0i X5 4.4i X5 4.6is X5 4.8is 
1997-2001 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 
1997-2001 E85 Z4 BMW Zi M Roadster Z4 M Coupe 
2000-2003 E52 Z8 BMW Z8 Z8 Alpina 

These aluminum filter housings are prone to cracking, which can lead to oil leaks and serious engine damage. To avoid such issues, it's essential to replace the entire housing and cooler assembly.

Fortunately, Febi provides a top-quality reproduction unit at a much lower cost than genuine parts. If you require a replacement filter housing, opting for Febi-Bilstein ensures a cost-effective and durable solution.

BMW E82 E88 Headlight Washer Pump

The BMW E82 E88 Headlight Washer Pump efficiently transfers washer fluid from the reservoir to the spray nozzles mounted in the bumper, ensuring that your headlights remain clear of dirt, debris, and bugs. Turner Motorsport provides this high-quality replacement pump, designed to restore the full functionality of your headlight washer system. If you notice that your headlight washers are not working and you don't hear the pump activate, it is likely that the pump needs to be replaced.

Benefits:

• Effectively clears dirt, debris, and bugs from your headlights
• Direct replacement pump for BMW E82 and E88 models
• Restores full functionality of the headlight washer system
• Easy installation with minimal modifications required
• Manufactured to meet or exceed OEM standards for reliability