Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

• Proprietary methods to lay wet carbon for a stronger and lighter product
• UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
• Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
• No black paint is used to hide imperfections along detail edges and creases.
• Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2004 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe

We design our carbon fiber mirror caps to be a direct OEM replacement. All replacement parts are made with 100% non-recycled raw plastic to ensure that the clips and tabs will not break off easily. Includes one pair of passenger and driver side direct OEM replacement mirror covers.

Install involves removing factory mirror covers and replacing with new carbon fiber mirror caps.

This product fits the following BMWs:
E90 M3
E92 M3
E93 M3
E82 1M

These 3D Design side skirts were designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from beautiful carbon fiber, they attach easily and accentuate your BMW's natural body lines, creating a high-class performance look. 

3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install easily to your factory bumpers & skirts to offer an understated, aggressive performance look.

Complete transformation for your 1 series. Direct bolt on muffler delete for a rowdy sound and a new and improved aggressive diffuser to compliment the exhaust.

A full aesthetic and sound transformation that is a direct fit solution. Both the diffuser and muffler delete are a direct replacement for the factory unit that can be upgraded with hand tools, no cutting or modification necessary!

M-Sport Rear Diffuser Upgrade:

Presenting the ECS rear diffuser tailored exclusively for your 1 Series – a fusion of both aftermarket and factory styling. Rarely does one find a design that not only encapsulates every curve and contour of a vehicle but elevates its overall aesthetic with a single, impactful addition. Amongst the limited options available for the 1 Series, the engineers at ECS have risen to the challenge of providing aftermarket support for these perfectly sized vehicles.

The diffuser replaces the mundane factory M Sport diffuser with a perfectly fitting alternative, designed to enhance the rear end of the 1 Series. Using the existing factory hardware and tab mounting locations, a transformation is merely a few screws and a plastic trim tool away. During the prototype phase, an impressive fit and finish were achieved, but their commitment to excellence led them to make further refinements. With the updated design, the ECS diffuser is now polished to perfection, an indication of the craftsmanship invested in each product.

Installation is a breeze, requiring no drilling, cutting, or modifications of any kind. Simply remove the current valance, align the tabs, and effortlessly secure the diffuser in place using the factory mounting locations and hardware. Ensure a snug fit by verifying the alignment of all tabs, and with a gentle press, witness the tabs seamlessly click into position.

For those with a 1 Series, anticipate a wave of excitement as a range of exhaust options tailored to all motor variants, including the N52, N54, and N55, are unveiled.

Features and advantages:

Transformative Enhances the rear aesthetic of the 1 Series Direct fit utilizing factory clip locations and hardware Available in Textured Matte Black and Gloss Black Crafted from lightweight, vacuum-formed UV-stabilized gloss black ABS polymer Compatible with both E82 and E88 models equipped with the M-Sport Package

135 Muffler Delete:

Arguably THE BEST modification for your 135. No cutting necessary, Direct bolt-on for a complete transformation!

The combination of 135 and muffler delete surpasses all sound expectations and is suspiciously easy to install! An impressive direct-fit solution, with no cutting involved. With the new muffler delete you can transform the sound and driving experience of your 135. A simple installation that can be completed with hand tools allows you to take your car to the next level at home in your garage! At the rear of the car just below the back seats, there is a factory flange with two bolts, simply remove the two bolts and barb from the factory hanger and swap with the ECS Tuning muffler delete for a direct replacement. Its as simple as that! Check out the installation instructions for a list of tools you will need!

-- CLICK HERE FOR INSTALLATION INSTRUCTIONS --

The ECS muffler delete removes the heavy and restrictive factory exhaust muffler and replaces it with a high-flow, straight-through exhaust pipe. This adds a louder exhaust note in a simple, cost-effective way without replacing the entire exhaust system and is fully compatible with the OEM rear valance. The muffler delete creates a noticeable increase in exhaust sound and more exhilarating turbo noise, without adding significant drone at cruising speeds. As an added bonus, this muffler delete shaves off 23.0 lbs., weighing in at only 7.0 lbs compared to the OEM muffler at 30 lbs!

Features and benefits:

Enhanced exhaust tone Simple installation (with instructions!) 23lb weight savings! (Factory muffler 30 lbs, muffler delete 7 lbs!) Swivel tip adjustment capability ​ Good looking and durable 304 stainless steel construction Factory position exhaust hangers Dual staggered tip exhaust tips Installation and Support:

Installation is as easy as unbolting, placing into position, and reinstalling fasteners! Tools you might want for the job: Exhaust hanger removal pliers - T379176 Product Development:

Our muffler delete was designed, engineered, tested, and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, and rigorous long-term product testing.

Performance Cat-Back Exhaust - E82/E88 135:

Lightweight cat-back featuring an exotic exhaust note. Designed for the perfect blend of performance and functionality!

Prepare to give your 1 series the boost it deserves. This cat-back exhaust was made to redefine the driving experience of your 135. Manufactured from premium brushed stainless steel, it is not just about reducing weight; it's about enhancing performance with unrestricted airflow. And the sound? It's a symphony of power and precision, carefully crafted for an unforgettable soundtrack. The sound experience is more than you could ask for. With the freedom of exhaust- flow and tuned exhaust note, we are very excited to get these exhausts on 135's everywhere, don't wait!

Featured on the ECS Tuning YouTube Channel!

When crafting the ECS exhaust systems, their primary focus is on achieving the perfect balance of sound and comfort. ECS's understand the desire for a thrilling exhaust note without the annoyance of highway drone or interior vibrations. The exhaust for your 135 incorporates this balance, offering a strageic blend of sportiness and practicality. Drawing from their extensive experience, particularly with N55 cars like the E9x series, they have engineered an exhaust packed with innovative features, compatible with both factory and aftermarket downpipes. Experience the perfect blend of performance and everyday usability.

There is something about a cat-back exhaust that is just so good. Being able to unbolt and replace the entire visible exhaust gives you butterflies in your stomach. A fresh new exhaust and just knowing that things are about to get rowdy. This exhaust features twin 2.5" brushed pipes with flanges that bolt directly to your factory and aftermarket down-pipes. The dual 2.5" mid-pipes make their way toward the rear axle and converge into a single 3" exhaust section. The 3" exhaust section snakes through the rear section of the car making smooth dips and curves to make its way into a light-weight 3" turbo style muffler. Don't be fooled by the 135 muffler, the size is nothing but deceiving. The turbo-style muffler features an inner design that refines the exhaust note to perfection. An extraordinary mixture of both tone and volume. Paired with the 3" muffler is your choice of 3.5" exhaust tips that give your rear diffuser a sporty look that shouts performance.

Although both N54 and N55 share identical exhaust geometry, the N55 mid-pipes do not feature secondaries. Though the N55 cat-back is compatible with N54 downpipes this is not suggested. Supposedly this N55 catback sounds absolutely glorious on an N54, even with aftermarket downpipes.

Features and Benefits:

Street/Motorsport inspiration Enhanced exhaust note Full exhaust replacement 25% lighter than stock! Stock cat-back: 56lbs ECS cat-back: 42lbs Reduction in back pressure for increased throttle response, TQ, and HP Dual 3.5" fitted exhaust tips Part Design:

In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment. T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged, and TIG-welded throughout Dual 2.5" Stainless Steel Mandrel Bent Tubing T304 Stainless Steel 12mm barbed exhaust hangers TIG-Welded in OE locations for precise fitment.​ Strategically placed slip joints provide the most adjustability to obtain perfect fitment Kit Contents:

Dual 2.5" mid-pipes 3" Rear exhaust section 3.0" free-flowing muffler section for better sound, and performance Clamps and Hardware for an OEM+ install Optional 3.5" ECS exhaust tips

Textured Black Rear Diffuser - E82/E88 M-Sport:

Presenting the ECS rear diffuser tailored exclusively for your 1 Series – a fusion of both aftermarket and factory styling. Rarely does one find a design that not only encapsulates every curve and contour of a vehicle but elevates its overall aesthetic with a single, impactful addition. Amongst the limited options available for the 1 Series, the engineers at ECS have risen to the challenge of providing aftermarket support for these perfectly sized vehicles.

The diffuser replaces the mundane factory M Sport diffuser with a perfectly fitting alternative, designed to enhance the rear end of the 1 Series. Using the existing factory hardware and tab mounting locations, a transformation is merely a few screws and a plastic trim tool away. During the prototype phase, an impressive fit and finish were achieved, but their commitment to excellence led them to make further refinements. With the updated design, the ECS diffuser is now polished to perfection, an indication of the craftsmanship invested in each product.

Installation is a breeze, requiring no drilling, cutting, or modifications of any kind. Simply remove the current valance, align the tabs, and effortlessly secure the diffuser in place using the factory mounting locations and hardware. Ensure a snug fit by verifying the alignment of all tabs, and with a gentle press, witness the tabs seamlessly click into position.

For those with a 1 Series, anticipate a wave of excitement as a range of exhaust options tailored to all motor variants, including the N52, N54, and N55, are unveiled.

Features and advantages:

Transformative Enhances the rear aesthetic of the 1 Series Direct fit utilizing factory clip locations and hardware Available in Textured Matte Black and Gloss Black Crafted from lightweight, vacuum-formed UV-stabilized gloss black ABS polymer Compatible with both E82 and E88 models equipped with the M-Sport Package