Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E88 Spring & Shock Packages (BMW Performance and More)

BMW E88 Spring & Shock Packages (BMW Performance and More) These suspension packages consist of H&R Springs combined with Bilstein Sport shocks and struts. This combination works exceptionally well on street-driven cars when coil overs are not available or not desired. These springs and shocks will lower the ride height, firm up the suspension, decrease bodyroll, and provide better handling. There's almost no downside save for a slightly firmer ride.

A shock/spring package is a direct replacement for the existing shocks, struts, and springs in your car. Unlike coil overs, there are no adjustments to be made or complicated mechanisms to use and the parts do not require special bushings and mounts. Our suspension packages install with the same original mounts as your stock shocks and springs (new parts are generally recommended of course). For a simple, inexpensive, and hassle-free suspension upgrade, a shock/spring package is impossible to beat. Bilstein shocks and H&R springs each carry a limited lifetime warranty.

For more information on packages versus coil overs, click to our guide.
You're currently viewing parts for your (E88) 1-series Convertible 2008+. Reset your chassis
For accurate results, specify your model below.
E82 128i/135i H&R Sport Cup Kit Suspension Package
  • Matching Shock & Spring Package
  • Comparable to a H&R Super Sport spring - aggressive upgrade over stock
  • Vastly improved handling but with less ride comfort

This H&R Sport Cup Kit is for drivers who want that extra edge from a stiffer suspension but without the expense and complexity of coil overs. The E82 Sport Cup Kit is a more aggressive version of the Touring kit. The ride height lowers the center of gravity and roll center even more and the springs are stiffer for more control over body motions and weight transfer. The Sport Cup Kit lowers the ride height as much as 2.2" in front and 1.5" in the back. The springs are still progressive rate so the ride stays compliant on small bumps but quickly gets stiffer. Overall, they are about 50% stiffer than the stock original springs. Lowering amount will be less if replacing the factory sport suspension. If you want a very precise and firm suspension, and ride quality is secondary, the Sport Cup Kit is superior to the Touring or any other shock/spring package we offer. This package fits with the stock strut and shock mounts but front camber plates are recommended because of the increased front negative camber.

This H&R Cup Kit is a tuned shock/spring package for the E82 128i and 135i. H&R matches a set of springs to performance shocks for a perfectly setup and functioning suspension package. Instead of mixing and matching springs with shocks, H&R has tailored each shock for the specific model, taking into account spring rates, chassis setup, and suspension motions. Without the shocks and springs engineered together the suspension may have incorrect travel or be a mis-match for spring rate (under-dampened) or too stiff. This E82 Cup Kit addresses all of that.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2008-2012 E88 BMW 128i Convertible 135i Converible
H&R
Part #: 31054-6
Price: $799.95 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
E82 128i/135i H&R Touring Cup Kit Suspension Package
  • Matching Shock & Spring Package
  • Comparable to a H&R Sport spring - mild upgrade over stock
  • Improved handling with minimal impact on ride comfort

If you want your 128's or 135's handling to be tighter and more controlled than what the factory provided, this H&R Touring Cup Kit is an excellent option. By lowering and stiffening the suspension you can reduce bodyroll and improve balance. Managing the weight transfer is key to better handling and more confidence in the suspension. With this kit you will be able to carry more speed through the corners without dramatic bodyroll.

H&R Touring Cup Kit springs lower the ride height as much as 1.8" in front and 1.3" in the back and stiffens the spring rate. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 35% stiffer than the stock original springs. Lowering amount will be less if replacing the factory sport suspension. This package fits with the stock strut and shock mounts, making for an easy and clean install.

This H&R Cup Kit is a tuned shock/spring package for the E82 128i and 135i. H&R matches a set of springs to performance shocks for a perfectly setup and functioning suspension package. Instead of mixing and matching springs with shocks, H&R has tailored each shock for the specific model, taking into account spring rates, chassis setup, and suspension motions. Without the shocks and springs engineered together the suspension may have incorrect travel or be a mis-match for spring rate (under-dampened) or too stiff. This E82 Cup Kit addresses all of that.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2008-2012 E88 BMW 128i Convertible 135i Converible
H&R
Part #: 31054T-6
Price: $799.95 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
Bilstein B12 Pro-Kit Suspension System - E82 128i/135i

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

Bilstein B12 Features: 

  • Precise response and excellent driving performance
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i

Bilstein
Part #: 46-180537
Price: $830.95 (USD) 
Ships on Jun 5, 2018
Quantity:   
AC Schnitzer Sport Suspension Package - E88

AC Schnitzer Sport Suspension is engineered to blend seamlessly with your BMW's chassis and suspension components to deliver superior handling and style without sacrificing ride quality. Schnitzer's suspension kit is designed with precision to improve overall suspension geometry. The springs are slightly stiffer than stock and fine tuned to reduce body roll, without sacrificing driving comfort.  A stiffer suspension makes the car more fun to drive, while the lower ride height improves the looks by reducing wheel gap. A great addition to enhance any suspension!

This item fits the following BMWs: 
2008-2013 E82 BMW 128i 135i

AC Schnitzer
Part #: 313088160
Price: $1295.00 (USD) 
Direct Ship
Quantity: