BMW Tools & Specialty Equipment for BMW E90 M3 S65 4.0L

The fuel pump is held into the tank with a retaining lock ring. Most people would take an extension or punch and tap out the ring with a hammer. But that's the wrong way to do it. You could damage the lock ring, or worse, the tank itself. This handy tool is toothed to match the lock ring and takes a standard 1/2 drive ratchet or small extension. Twist the ratchet and the lock ring comes un-done cleanly and smoothly. A hefty tool that pays for itself over and over. Fits most BMWs from 1988-2013. Also has application for MINI and Porsche.

This metal screw ring tightens down to old the top of the fuel pump or fuel filter assembly dependent on model of vehicle.

Together they make this job simple and easy and ensure a tight fit with a new ring. 

Due to clearance issues, many types of lifts require specific adapters that are made for reaching SUV and truck jack points. This 12-piece kit has been made by using stackable adapters that mount inside the lifting block trays so that vehicles with high ground-clearance or those with unique jack point locations are better accommodated. These adapters offer up to 7.2" of additional height when all combined.

Complete kit includes:

• Low‐profile round polyurethane contact pads  -  Qty: 4
• Sliding receivers that accommodate the round polyurethane contact pads and/or the stackable adapters  -  Qty: 4
• 3" stackable adapters.  -  Qty: 4

Fits BL-5000SLX/EXT and BL-7000SLX/EXT Series Only.

Urethane Pinch-Weld Block - Set provides a superior solution for supporting vehicles on pinch-weld rails. Traditional rubber blocks can cause damage to delicate body rails due to excessive pressure points. These urethane pinch-weld blocks are engineered with a cross-cut slotted design, allowing versatile positioning either lengthwise or crosswise. They are ideal for safely supporting rocker panels or sheet metal body rails, particularly those that have degraded from corrosion over time.

• Specially formulated urethane rubber for durability
• Deep bilateral slots accommodate virtually all pinch weld frames
• Versatile positioning: lengthwise or crosswise
• Water, chemical resistant, and 100% weatherproof
• Single-piece construction ensures a superior hold
• Dimensions: 3.9” (L) x 2.9” (W) x 2.4” (H)

Engineered for optimal comfort and ease of movement, this reclining creeper seat is ideal for anyone working under vehicles. Its gas spring-supported backrest offers adjustable reclining from 0° to 70°, with seat angles shifting in 10° increments up to 30°, delivering superior ergonomics for mechanics and hobbyists alike.

Equipped with six 360° swivel casters, this creeper seat glides effortlessly around the workspace, allowing you to move smoothly without constantly adjusting your position, helping you stay focused on the job.

Constructed from heavy-duty materials, the seat is upholstered with non-slip, marine-grade vinyl, resistant to abrasion, chemicals, and oil. This durable design provides long-lasting comfort and is the perfect addition to your garage setup.

Features:

• TPR wheels feature a shock absorbing cushioned ride, while providing good floor protection and quiet rolling operation
• TPR wheels are resistant to chemicals, acids, alcohol, and water
• Wide, large diameter wheel improves rolling over rough surfaces
• Heavy-duty non-slip textured marine grade vinyl
• Comfortable thick-padded seat and backrest
• Locking casters
• Seat is resistant to abrasion, chemical, and oil

Specifications:

• Length (Backrest Up): 33 in. / 840 mm
• Length (Backrest Down): 45.25 in. / 1,150 mm
• Width (Frame): 17 in. / 430 mm
• Width Overall: 20.75 in. / 530 mm
• Seat Height (Down): 6.25 in. / 161 mm
• Backrest Height (Up): 31.5 in. / 800 mm
• Seat/Backrest Width: 14.75 in. / 376 mm
• Ground Clearance: ≈3 in. / 76 mm
• Seat Angle Min. / Max.: ≈0° to 30°
• Maximum Load: 600 lbs. / 272 kg.
• Backrest Angle Adjustment: Gas spring
• Seat Angle Adjustment: Mechanical Lock — 3 positions
• Casters: Six 360° Casters, ø2.5 in x .75 in., sleeve bearings, oil resistant, non-marring rubber wheels.
• Seat Materials: Padded Marine Vinyl Backrest and Seat. Marine Vinyl is abrasion, chemical and oil resistant.
• Frame Materials: Full powder coated, welded steel square tube
• Weight: 41.25 lbs. / 19 kg.
• Backrest Angle Min. / Max.: ≈0° to 70°