BMW Brakes & Brake Parts for BMW E90 M3 S65 4.0L

This caliper bushing kit will eliminate flex caused by weak rubber caliper bushings. As the brake pedal is pressed the caliper grabs the rotor and twists on its mounting bushings. The rubber bushings allow the caliper to deflect and twist which affects pedal feel and results in uneven pad wear. These solid brass bushings will not twist or deflect so your calipers can squeeze the pads evenly on both sides of the rotor (sort of like what multi-piston big brakes do). This will give you much longer pad life and a more consistent pedal feel. This is the most complete kit we have ever sold with stainless steel caliper slide bolts, o-rings, and new dust boots. Unlike other kits, these bushings are pressed into the caliper and will not shift or slide on their own.

Installation is straightforward: remove the old rubber bushings and press in the new brass bushings (we recommend special tool 003326ECS03). High temp caliper grease or anti-seize is required. The new bushings include an inner o-ring that helps trap grease on the slide bolt, reducing friction and wear.

***Click here for installation instructions*** 

***Click here for the installation tool***

For most models with floating calipers. Fits the rear of E90/2 and E60, but for the front you'll need the kit found here. Does not fit E30 models with Girling calipers, but is compatible with Ate calipers. 

From years of European automotive experience, the enthusiasts at ECS Tuning have developed a strong understanding of what it takes to produce a quality high-performance brake pad. After thousands of miles and many different pad compounds, they've landed on the ideal blend for the new EP24 "Enthusiast Performance" brake pad! If you're looking for a streetable, track-capable, performance brake pad, look no further than the ECS EP24!

Features & Benefits:

Strong stopping power - Increased coefficient of friction offers satisfying stopping power when cold (a necessity for a street pad!) and even more G-force-inducing power when they warm up. With cold and warm friction comparable to Hawk HPS (and higher than many other street pads) the stopping experience with the EP24 pad is impressive for street-driven vehicles on streetable tires. Positive initial bite - Race pads have the reputation of acting like an on/off switch, which is a no-go for a pad for a street application. The EP24 offers OE-level initial bite for low-stress braking in stop-and-go situations. Reasonable dust - Race pads utilize a high metallic composition. Pads that use high amounts of metal not only dust terribly, but also will bake onto wheels with high temperatures and are a bear to clean. This is not the case with these performance street pads. Now using these pads on most of our shop cars, we’ve found over time that dust is comparable to factory pads in most applications (with greatly improved braking performance). Quiet braking - It’s not a race pad, so it shouldn’t squeal like one. While not as quiet as our ceramic DD23 pad, you’ll still be able to drive your spouse to dinner. Long life - This should be an obvious one. Even in a performance pad, your daily driver pads should last and last, so that was key in selecting our ideal compound. This compound wears slower and is kinder to rotors than two of the top competitors.

EP24 "Enthusiast Performance" brake pads are included in our Lifetime Replacement Program for worry-free motoring.

From years of European automotive experience, the enthusiasts at ECS Tuning have developed a strong understanding of what it takes to produce a high-quality brake pad. After thousands of miles and many different pad compounds, they've landed on the ideal blend for the new DD23 "Daily Driver" brake pad! This enthusiast-developed pad offers confident stopping power, very low dust, quiet braking, and a positive initial bite. The perfect choice for your daily-driven Euro!

If you find yourself “pumping the brakes” over the brake pad selection process for your daily driver, your answer is this DD23 pad. This is the one!

As a team of enthusiasts who own all types of European cars, we have the advantage of the exposure that comes with the enthusiast lifestyle - and have a strong understanding of what makes a great brake pad. In the pursuit of a really great brake pad for daily driving, we’ve tested a wide range of brake pads. After thousands of test miles, iterating through a variety of pad compounds, we’ve landed on the ideal blend for our DD23 Daily Driver ceramic pad.

Features:

Good stopping power - Brake pads need to stop your car, period, so this is key. We focused on selecting a compound that offers a healthy level of friction (both when hot and when cold) for safe, positive stopping power.

Positive initial bite - You should feel your brakes engage as you press the pedal, but it should not feel like an on/off switch! Advanced ceramic composition means you’ll enjoy a smooth transition on and off of the brake pedal, meaning your passengers will have a comfortable ride in stop-and-go traffic. We’ve hit a good balance here.

Very low-dust - Some factory-installed pads are eye-poppingly dusty, which is a no-go for us. Thanks to the composition of this ceramic pad, which is copper-free and contains a negligible amount of other metals, dust is both lighter in color and very limited in amount. We’ve improved on the “dust factor” without sacrificing on bite and stopping power as a good compromise, which will be a win for anyone who doesn’t detail daily (or anyone who does, too!)

Quiet braking - It’s not a race pad, so it shouldn’t squeal like one. Extremely low metallic composition means they will not squeal. DD23 is comfortable and quiet - both on the ears and in lack of vibration transmitted through the cabin.

Long life - This should be an obvious one. Your daily driver pads should last and last, so that was key in selecting our ideal compound. This is another benefit to having ceramic material composition versus a softer organic pad (which have higher metallic and various organic elements) and wear much faster. Ours are kind to rotors, too (no accelerated wear characteristics) for many miles of motoring.

From years of European automotive experience, the enthusiasts at ECS Tuning have developed a strong understanding of what it takes to produce a quality high-performance brake pad. After thousands of miles and many different pad compounds, they've landed on the ideal blend for the new EP24 "Enthusiast Performance" brake pad! If you're looking for a streetable, track-capable, performance brake pad, look no further than the ECS EP24!

Features & Benefits:

Strong stopping power - Increased coefficient of friction offers satisfying stopping power when cold (a necessity for a street pad!) and even more G-force-inducing power when they warm up. With cold and warm friction comparable to Hawk HPS (and higher than many other street pads) the stopping experience with the EP24 pad is impressive for street-driven vehicles on streetable tires. Positive initial bite - Race pads have the reputation of acting like an on/off switch, which is a no-go for a pad for a street application. The EP24 offers OE-level initial bite for low-stress braking in stop-and-go situations. Reasonable dust - Race pads utilize a high metallic composition. Pads that use high amounts of metal not only dust terribly, but also will bake onto wheels with high temperatures and are a bear to clean. This is not the case with these performance street pads. Now using these pads on most of our shop cars, we’ve found over time that dust is comparable to factory pads in most applications (with greatly improved braking performance). Quiet braking - It’s not a race pad, so it shouldn’t squeal like one. While not as quiet as our ceramic DD23 pad, you’ll still be able to drive your spouse to dinner. Long life - This should be an obvious one. Even in a performance pad, your daily driver pads should last and last, so that was key in selecting our ideal compound. This compound wears slower and is kinder to rotors than two of the top competitors.

EP24 "Enthusiast Performance" brake pads are included in our Lifetime Replacement Program for worry-free motoring.

Enhance your BMW E9X M3's braking performance with the comprehensive ECS Performance Brake Kit, ideal for both street and track applications. Engineered to deliver exceptional stopping power without compromising compatibility with factory 19" wheels, this kit is a game-changer in terms of both form and function.

• Enhanced Brake Cooling: Enjoy a 50% increase in brake cooling and heat carry capacities for improved performance.
• Eye-catching Calipers: Vibrant blue Brembo 6-piston calipers adorned with ///M logos offer a stunning visual behind your wheels.
• Simple Installation: No vehicle modifications necessary, making installation as straightforward as a standard brake service.
• Factory Wheel Compatibility: Fits perfectly under factory 19" Style 219 front wheels, with fitment guidance provided for other wheel types.
• Included Components:
  • Genuine F10 M5/Brembo 6-piston calipers
  • ECS Tuning 2-piece 382x36mm rotors
  • ECS Tuning Exact-Fit brake lines and stainless steel rotor set screws
  • Pentosin Super DOT4 brake fluid
  • Hardware & pad wear sensors for the front

The rear segment of this kit includes ECS 2-piece rotors, Cool Carbon Performance brake pads, and ECS Exact-Fit brake lines, completing the comprehensive upgrade for consistent and reliable braking power.

Installation Note: Front brake kit reuse factory brake dust shields; slight bending of caliper dust shields is required.

Ensure proper torque values during installation:

• Bracket to knuckle: 110Nm
• Caliper to bracket: 115Nm

Caliper: 6-pistonmonoblock
Caliper color: black (standard), red, silver
Rotors: 365x32mm, 2-piece, cross-drilled or slotted

With Brembo Big Brakes you will get maximum braking force thanks to theirrigid mounting and greater stopping performance thanks to the larger rotors andbetter heat dissipation. Gran Turismo brake kits come with a high-performancebrake pad as standard. This kit requires 18" wheels - including the stock 18" wheels if a small spacer is used (click here for wheel clearance diagram). Choose the caliper color and the rotor style that youwould like below.

Best Price Guaranteed! If you find this kit listed elsewhere for less, let us know by phone or email and we'll match or beat the competition.

This item fits the following BMWs:
2008+ E90 BMW M3 Sedan
2008+ E92 BMW M3 Coupe
2008+ E93 BMW M3 Convertible

Struggling with corroded brake rotor set screws on your BMW? ECS Tuning has the perfect solution. Introducing our stainless steel rotor set screws that won't seize up, preventing the need for drilling out failed screws. The stainless steel composition ensures easy removal, offering years of trouble-free use compared to the OEM part.

• Stainless steel construction prevents corrosion
• Easy removal for years of trouble-free use
• Eliminates the risk of seized set screws
• Custom-designed for BMW vehicles
• Avoids the need for drilling out failed screws
• Check fitment information for your specific BMW model

Caliper: 4-piston monobloc (similar to photo)
Caliper color: black (standard), red, silver
Rotors: 345x28mm, 2-piece, cross-drilled or slotted

With Brembo Big Brakes you will get maximum braking force thanks to theirrigid mounting and greater stopping performance thanks to the larger rotors andbetter heat dissipation. Gran Turismo brake kits come with a high-performancebrake pad as standard. This kit requires 18" wheels - including the stock 18" wheels if a small spacer is used. Click here for wheel clearance diagram. Choose the caliper color and the rotor style that youwould like below.

Best Price Guaranteed! If you find this kit listed elsewhere for less, let us know by phone or email and we'll match or beat the competition.

This item fits the following BMWs:
2008+ E90 BMW M3 Sedan
2008+ E92 BMW M3 Coupe
2008+ E93 BMW M3 Convertible

BMW Brembo Type 3 Slotted Rotor Re-Ring Kit - 355x32mm is an essential upgrade for maintaining the peak performance of your Brembo brake system. This re-ring kit, available through Turner Motorsport, includes new rotor rings and rotor hat hardware kits specifically designed for Type 3 slotted 355x32mm Brembo brake kits, ensuring that your braking system remains efficient and responsive.

The BMW Brembo Type 3 Slotted Rotor Re-Ring Kit is engineered to provide optimal braking performance by enhancing heat dissipation and reducing brake fade. The Type 3 slotted design offers superior bite and consistent braking, even under the most demanding conditions, making it perfect for both track enthusiasts and spirited street drivers. By replacing the rotor rings with this high-quality kit, you maintain the integrity of your brake system without the need to purchase an entirely new rotor assembly.

This kit is designed to be a direct fit for Brembo brake kits, making installation straightforward and hassle-free. With Turner Motorsport’s commitment to quality, you can trust that this re-ring kit will provide reliable performance and longevity.

• Optimal braking performance: Enhances heat dissipation and reduces brake fade for consistent stopping power.
• High-quality replacement: Includes new rotor rings and rotor hat hardware for Brembo Type 3 slotted 355x32mm brake kits.
• Direct fit: Designed for easy installation with no modifications required.
• Cost-effective maintenance: Replaces worn rotor rings, preserving your brake system’s efficiency without needing a full rotor replacement.
• Track-ready performance: Superior bite and consistent braking under demanding conditions.