Oiling System for BMW 3 Series E90 (2006-2011)

Clear BMW chassis

Please ensure your correct model is selected

Tasked with keeping everything properly lubricated, the oiling system is one of the most if not THE most fundamental parts of the engine. Make sure that everything is in good working order and flowing properly to ensure your engine has a long and trouble-free service life.

Sub-Categories

Sort By:

MMX Performance - Corporate Logo
T#:4565826
Part#: MMR17-0101
Back Ordered
$ 70.99 USD
Free Shipping on orders $49 and up
MMR's Low Temp Oil Thermostat is one of the easiest ways to increase your oil cooling capability. Rated to maintain the oil temps at about 194F (90c) to 230F (110c). Machined from aircraft grade T-6061 aluminum and anodized in MMR's trademark finish for durability. Installation is easy as it fits right into the OEM oil thermostat housing on the N54 and N55. Highly recommended for cars used on the track or with a higher power and torque output than stock.
Show More Show Less
Iwis - Corporate Logo
T#:36981080
Part#: 90001301
In Stock
$ 304.83 USD
Free Shipping
$ 304.83 USD
Free Shipping
Prevent costly failure with this IWIS Engine Oil Pump Chain Kit! This kit contains all of the basic items needed to service your oil pump drive system and prevent failure long before it occurs. Chains can stretch and chain guides and tensioners can wear out, leading to the chain skipping teeth. This prevents the oil pump from being driven at the proper speeds. If not addressed, the chain could begin to "slip" over the gears, failing to drive the oil pump. When this occurs, oil pressure will drop suddenly, failing to properly lubricate sensitive internal engine components such as main bearings, rod bearings, and camshaft ledges and lobes, resulting in severe scoring and eventual engine failure.
Show More Show Less
Oil Pan Gasket Replacement Kit
For vehicles with automatic transmission only
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Packaged by Turner - Corporate Logo
T#:5403285
Part#: 11137548031TMSKT
In Stock
Sale - Save 19% $ 232.99

This product was last offered at the strikethrough price on
11-07-2026

$ 188.85 USD
Free Shipping
Sale - Save 19%
$ 232.99

This product was last offered at the strikethrough price on
11-07-2026

$ 188.85 USD
Free Shipping
Includes new pan gasket, hardware and a oil service kit. A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.

Genuine BMW - Corporate Logo
T#:35107
Part#: 11417837578
Ships in 1-2 days
6% off MSRP $ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 29.99 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 29.99 USD
Free Shipping on orders $49 and up


Genuine BMW Chain Tensioner
This item fits the following BMW Chassis:
E60 M5,E63 M6,E63,E90,E92,E93

Fits BMW Engines including:
S65,S85


FTP Motorsport - Corporate Logo
T#:582222
Part#: SG84006
Ships on Feb 1, 2027
$ 54.00 USD
Free Shipping on orders $49 and up
$ 54.00 USD
Free Shipping on orders $49 and up
This thermostat will open sooner and help to lower the overall oil temperature.
Oil Pump Chain
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Bremmen Parts - Corporate Logo
T#:26271803
Part#: 11417584079
In Stock
Sale - Save 30% $ 40.99

This product was last offered at the strikethrough price on
11-07-2026

$ 28.69 USD
Free Shipping on orders $49 and up
Sale - Save 30%
$ 40.99

This product was last offered at the strikethrough price on
11-07-2026

$ 28.69 USD
Free Shipping on orders $49 and up

Oil Pan Bolt Set
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Bremmen Parts - Corporate Logo
T#:54068664
Part#: 11132210959
In Stock
New Item
Sale - Save 30% $ 48.99

This product was last offered at the strikethrough price on
11-07-2026

$ 34.29 USD
Free Shipping on orders $49 and up
Sale - Save 30%
$ 48.99

This product was last offered at the strikethrough price on
11-07-2026

$ 34.29 USD
Free Shipping on orders $49 and up
Paradigm Engineering - Corporate Logo
T#:5269538
Part#: OILCAPNXXS55BLU
Back Ordered
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Paradigm Engineering’s magnetic oil filter cap augments your vehicle's oil filtration system and serves as a diagnostic tool. Each oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Samarium-Cobalt rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter, and could be an indication of a serious issue within your engine.
Show More Show Less

Bremmen Oil Filter Housing Cover - BMW N20 N52 N54 N55 S55
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Bremmen Parts - Corporate Logo
T#:640150
Part#: 11427525334
Ships on Jan 11, 2027
Sale - Save 25% $ 31.99

This product was last offered at the strikethrough price on
11-07-2026

$ 23.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 31.99

This product was last offered at the strikethrough price on
11-07-2026

$ 23.99 USD
Free Shipping on orders $49 and up
If your oil filter housing cap is cracked or stripped, replace it with a fresh one from Bremmen Parts!

Transmission Oil Cooler - Heat Exchanger
2X Entries Into Our F80 M3 Sweepstakes 2X Entries For Our Spin To Win Sweepstakes!
URO - Corporate Logo
T#:20617630
Part#: 17217536929
In Stock
$ 115.85 USD
Free Shipping on orders $49 and up
An OE automatic transmission oil cooler heat exchanger for your BMW will guarantee proper fitment. This heat exchanger will keep your BMW's transmission oil cool. Corrosion-resistant, high-strength materials ensure reliable leak-free ATF cooling performance. Manufactured to OE transmission oil cooler dimensions for proper clearances and easy bolt-on installation.
Show More Show Less
MMX Performance - Corporate Logo
T#:4552065
Part#: MMR03-0101-BL
Ships in 2 Business Days
$ 142.99 USD
Free Shipping
$ 142.99 USD
Free Shipping
If you are looking for peace of mind over the prone to cracking OEM plastic housing cap, this oil filter housing cap by MMX may be exactly what you are looking for. Composed of billet aluminum, this cap is light, durable, and dresses up your engine bay! Comes finished with a polished anodized dark anthracite coating. Installation is simple as it can be replaced while completing an oil change. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.
Show More Show Less
Bremmen Engine Oil Pan - E82/88 E9X Z4 RWD (N54/55 3.0L)
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
For RWD models only!
Bremmen Parts - Corporate Logo
T#:2393341
Part#: 11137570400
In Stock
Sale - Save 25% $ 312.99

This product was last offered at the strikethrough price on
11-07-2026

$ 234.74 USD
Free Shipping
Sale - Save 25%
$ 312.99

This product was last offered at the strikethrough price on
11-07-2026

$ 234.74 USD
Free Shipping
When your oil pan has suffered damage due to road debris or the vehicle making contact with the road surface, immediate replacement is crucial. This preventative action ensures that any potential cracks or leaks, which could ultimately result in catastrophic engine failure, are averted. Don't wait – safeguard your engine's integrity with a prompt oil pan replacement.
Show More Show Less


Mann - Corporate Logo
T#:369102
Part#: 11427566327
In Stock
$ 142.99

This product was last offered at the strikethrough price on
10-23-2026

$ 107.99 USD
Free Shipping
$ 107.99 USD
Free Shipping
Stock up on oil filters and save some cash! You are going to need them, why not get a discount? This is an OEM Mann oil filter kit made with the same materials and design as the original oil filter used in BMW dealers (but at a better price!). The kit includes the oil filter, housing cap o-ring, and washer.
Show More Show Less
BLACKLINE BMW M Car Series BLACKLINE Performance Heritage Motorsport ...
For vehicles with a production date up to 03/2010
Goldenwrench Supply Co - Corporate Logo
T#:53820895
Part#: S54OCCS
In Stock
New Item
$ 83.00 USD
Free Shipping on orders $49 and up
$ 83.00 USD
Free Shipping on orders $49 and up
Designed for Seamless Integration the Heritage Motorsport Oil Cap provides a Solid Aluminum Replacement for Aging Plastic units
Genuine BMW - Corporate Logo
T#:35073
Part#: 11417622768
In Stock
2% off MSRP $ 213.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 208.99 USD
Free Shipping
2% off MSRP
$ 213.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 208.99 USD
Free Shipping


Genuine BMW Hydraulic Valve -
This item fits the following BMW Chassis:
E71,E82,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26,N55

Show More Show Less

ECS Tuning Baffled Oil Catch Can - 8oz
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
ECS - Corporate Logo
T#:13496655
Part#: 003779ECS05-02
In Stock
Sale - Save 10% $ 238.99

This product was last offered at the strikethrough price on
11-07-2026

$ 215.09 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 238.99

This product was last offered at the strikethrough price on
11-07-2026

$ 215.09 USD
Free Shipping on orders $49 and up
Upgrade Your BMW with ECS Baffled Oil Catch Can

Modern emission regulations require a closed PCV/Breather system for cleaner operation. However, inefficient oil particle capture can lead to excessive oil vapor ingestion, causing carbon buildup, reduced performance, and fuel economy. ECS Tuning's updated ECS Baffled Oil Catch Can, now with an easy-to-empty 1/4" drain fitting, is engineered to collect toxic blow-by gases, minimize carbon deposits, and reduce oil contamination within engine oil. Recirculating oil vapor ensures emissions compliance without venting to the atmosphere.

  • Key Features:
  • Highly Efficient Oil Separator: Strategically positioned 4 chamber baffle system maximizes oil/air separation and minimizes oil droplets in the intake tract.
  • Integrated Dipstick: Knurled and black anodized oil dipstick simplifies oil volume inspection.
  • Reservoir: Available in 6oz or 8oz capacity with a 1/4" NPT drain plug fitting.
  • Serviceable: Easily removable baffle plates and drain plug for cleaning.
  • Easy/Customizable Installation: Combine with the ECS Universal Bracket Kit for simplified installation and adjustable mounting locations.
  • Leak-Free Fittings: Machined -10AN ORB (O-Ring Boss) fittings available for secure connections (fittings sold separately).
Show More Show Less

URO Engine Oil Pan - BMW E9X M3 S65
2X Entries Into Our F80 M3 Sweepstakes 2X Entries For Our Spin To Win Sweepstakes!
URO - Corporate Logo
T#:53079357
Part#: 11137839227
Back Ordered
$ 1,340.99

This product was last offered at the strikethrough price on
06-01-2026

$ 1,329.99 USD
$ 1,329.99 USD
Replacement oil pan for the S65 engine found in the E90/E92/E93 M3. Pan only, does not include gasket, oil level sensor, or drain plug.
Vargas Turbo Technologies - Corporate Logo
T#:5122264
Part#: VTTFILTERCAPBLK
Ships in 10 Business Days
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
Show More Show Less

Genuine BMW - Corporate Logo
T#:31680
Part#: 11130396707
Ships in 1-2 days
5% off MSRP $ 93.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 88.99 USD
Free Shipping
5% off MSRP
$ 93.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 88.99 USD
Free Shipping
Genuine BMW SET OF ALUMINIUM SCREWS OIL
Fits BMW Engines including:
N51,N52,N52N

Genuine BMW - Corporate Logo
T#:35462
Part#: 11427838009
In Stock
6% off MSRP $ 64.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.89 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 64.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.89 USD
Free Shipping on orders $49 and up


Genuine BMW Oil Filter Cover -
This item fits the following BMW Chassis:
E90,E92,E93

Fits BMW Engines including:
S65


Genuine BMW - Corporate Logo
T#:360718
Part#: 12617508003
Ships in 1-2 days
6% off MSRP $ 349.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 329.99 USD
Free Shipping
6% off MSRP
$ 349.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 329.99 USD
Free Shipping

Paradigm Engineering - Corporate Logo
T#:5269537
Part#: OILCAPNXXS55RED
Ships in 4 Business Days
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Paradigm Engineering’s magnetic oil filter cap augments your vehicle's oil filtration system and serves as a diagnostic tool. Each oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Samarium-Cobalt rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter, and could be an indication of a serious issue within your engine.
Show More Show Less
Genuine BMW - Corporate Logo
T#:35033
Part#: 11417563246
Ships in 2 Business Days
6% off MSRP $ 34.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 32.99 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 34.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 32.99 USD
Free Shipping on orders $49 and up
Wearing oil pump components can lead to a loss in oil pressure leading to catastrophic failures. The oil pump is a critical part of keeping your engine lubricated and running at its best. Replace worn components and prevent any possible issues!
Show More Show Less
Genuine BMW - Corporate Logo
T#:34782
Part#: 11377583786
In Stock
2% off MSRP $ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD
Free Shipping on orders $49 and up


Genuine BMW Oil Spraying Nozzle -
This item fits the following BMW Chassis:
E71,E82,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N20,N26,N55,S55

Show More Show Less


Bimmerworld - Corporate Logo
T#:637641
Part#: 100.11.590.0004
Ships in 1-2 days
$ 229.99 USD
Free Shipping
$ 229.99 USD
Free Shipping
A frustration too many BMW owners share is the inability to physically check the oil level. BMW began replacing traditional style dipsticks with new level sensors that display your oil level on your iDrive system. In theory, this could be great. An electrical, sensor-based oil level system would allow for continuous monitoring of the oil level and immediate warning in the event of oil loss. The main problem with this updated system is the sensors themselves and the sub-par electronics that control and report this information to the iDrive system. In practice, the oil level sensors have proven to be slow, inaccurate, and even faulty, displaying wildly inaccurate measurements. Needless to say, the team over at Bimmerworld felt this needed to be addressed with something a little more reliable. Returning to the tried and true method, Bimmerworld now offers their very own S65 Oil Dipstick Parts Kit. This kit includes everything you need to install a dipstick in your M3.
Show More Show Less
Canton Racing - Corporate Logo
T#:8246787
Part#: 24-126
Ships on Dec 14, 2026
17% off MSRP $ 1,006.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 839.00 USD
17% off MSRP
$ 1,006.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 839.00 USD
Febi Oil Filter Housing Replacement Kit - 11428683206
For vehicles with High Speed Synchronization (oil cooler) option
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:28337870
Part#: 11428683206
In Stock
$ 251.99 USD
Free Shipping on orders $49 and up
$ 251.99 USD
Free Shipping on orders $49 and up

These aluminum filter housings are prone to cracking, which can lead to oil leaks and serious engine damage. To avoid such issues, it's essential to replace the entire housing and cooler assembly.

Fortunately, Febi provides a top-quality reproduction unit at a much lower cost than genuine parts. If you require a replacement filter housing, opting for Febi-Bilstein ensures a cost-effective and durable solution.

Show More Show Less

VRSF Aluminum Oil Catch Can BMW N54
We Price Match - Give Us A Call or Chat!
VRSF - Corporate Logo
T#:5788181
Part#: 205420
Ships in 1 Business Day
$ 179.99 USD
Free Shipping
$ 179.99 USD
Free Shipping
Keep your intake tract free of oil with our baffled aluminum oil catch can. N54 motors are prone to excessive blow by which causes the entire intake tract to gunk up with oil and directly contributes to issue where the intake valves get caked with burnt oil creating excessive carbon deposits. This can be prevented with the use of our properly designed oil catch can that was built specifically for the N54 motor to ensure you don’t suffer power loss as well as additional maintenance costs caused by excessive oil blow by. This catch can includes everything necessary for installation on your N54 BMW and takes less than 20-25 minutes to install. Each kit includes is powder coated in black and includes VRSF lifetime.
Show More Show Less

Mishimoto - Corporate Logo
T#:383384
Part#: MMBCCN5406CBE
In Stock
Sale - Save 10% $ 253.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 228.56 USD
Free Shipping
Sale - Save 10%
$ 253.99

This product was last offered at the strikethrough price on
11-19-2026

$ 228.56 USD
Free Shipping
Oil venting and circulation continues to be a problem on BMW engines and now even more so on the turbocharged N54 and N55 engines. The existing stock system does a very poor job of separating fluid and vapor and this leads to an oily film or even small pools of oil throughout the turbos and intake. We're seeing a lot more 135 and 335 cars with drivability and performance issues because oil has sneaked by the ring seals and is coating the intake piping, intercooler, intake valves, and other critical areas. The problem is worsened with higher boost levels. Oil is excellent for lubricating moving parts but terrible when it gets into the combustion chamber, effectively lowering the octane rating and reducing performance. Our own shop has gone the extra step and offers media and chemical blasting of the intake valves to strip away the oily buildup we have seen. Our shop also strongly recommends an oil catch can be installed in the line for the crankcase vent. The oil catch can traps oil as it leaves the valve cover and holds it in a canister. This catch can is located on the cooler side of the engine where the oil will condense easier and stay in the can. Whatever minimal vapors are left over in the oil is then vented back through the canister and into the intake where it is safe to be burned up in the engine or recirculated back through the system again. This is the way the system was designed! At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil. Installing one of these will avoid costly repairs in the future and help maintain your boost and performance. It's one of the smartest modifications you can make because it demonstrates a well-thought out tuning strategy and care for the condition of your engine. The Mishimoto Oil Catch Can is made from aluminum and with a stealthy black anodized finish. It installs on the cooler side of the engine with a dedicated bracket and new oversized vent lines. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles. This item fits the following BMWs with the N54 twin-turbo engine: 2008-2010 E82 E88 BMW 135i 2007-2010 E9X BMW 335i 335xi 2006-2010 E60 BMW 535i 535xi WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
BMW N52 N54 N55 3.0L Engines Oil Filter Housing
2X Entries Into Our F80 M3 Sweepstakes 2X Entries For Our Spin To Win Sweepstakes!
URO - Corporate Logo
T#:20617624
Part#: 11428642283
In Stock
$ 301.99

This product was last offered at the strikethrough price on
11-07-2026

$ 258.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 301.99

This product was last offered at the strikethrough price on
11-07-2026

$ 258.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
If you're seeing leaking oil around your oil filter housing, you may need to replace your oil filter housing and the formed seals between the housing and the cylinder head. Over time the cap may become brittle and the seals may become hard and let oil pass through. If you have these signs, we have the solution for you! We provide high-quality parts that will guarantee to fix your concern.
Show More Show Less

Genuine BMW - Corporate Logo
T#:35028
Part#: 11417560250
Ships in 1-2 days
9% off MSRP $ 783.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 716.99 USD
Free Shipping
9% off MSRP
$ 783.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 716.99 USD
Free Shipping


Genuine BMW Oil Pump
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02

Fits BMW Engines including:
N54,N54T

Show More Show Less
Oil Filter Housing Gasket Kit - N52 3.0L
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Packaged by Turner - Corporate Logo
T#:24212294
Part#: N52OFHGKT
In Stock
Sale - Save 3% $ 138.99

This product was last offered at the strikethrough price on
11-07-2026

$ 134.82 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 138.99

This product was last offered at the strikethrough price on
11-07-2026

$ 134.82 USD
Free Shipping on orders $49 and up
A leaking gasket can cause headaches down the road, usually when you least expect it. The N52 engine can suffer a particularly troublesome leak around the oil filter housing gasket. Generally seen as something to keep an eye on, this is not something that should be put off. The upgraded Bavarian Autosport gasket is made from a DuPont Viton rubber that has a higher temperature and chemical resistance than the stock gasket material. This gasket should last the lifetime of the engine without breaking down and leaking like the Genuine BMW parts do.
Show More Show Less

Hydraulic Valve
2X Entries Into Our F80 M3 Sweepstakes 2X Entries For Our Spin To Win Sweepstakes!
URO - Corporate Logo
T#:35863146
Part#: 11417622768
Back Ordered
$ 93.99 USD
Free Shipping on orders $49 and up
This valve is located on the front of the engine block and is responsible for keeping hydraulic pressures in check.

Genuine BMW - Corporate Logo
T#:35054
Part#: 11417584079
In Stock
13% off MSRP $ 119.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 103.99 USD
Free Shipping
13% off MSRP
$ 119.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 103.99 USD
Free Shipping
Genuine BMW timing chain. If you're servicing any timing components, its a good time to replace the chain as well.
OEM Hengst Engine Oil Filter Kit - Pack of 10 - N20 N52 N54 N55 ...
5X Entries Into Our F80 M3 Sweepstakes 2X Entries For Our Spin To Win Sweepstakes!
5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat! Hengst is our preferred OEM filtration supplier!
Hengst - Corporate Logo
T#:567542
Part#: 11427566327
In Stock
$ 105.99 USD
Free Shipping
$ 105.99 USD
Free Shipping
Stock up on oil filters and save some cash! You are going to need them, why not get a discount? This is an OEM Hengst oil filter kit made with the same materials and design as the original oil filter used in BMW dealers (but at a better price!). The kit includes the oil filter, housing cap o-ring, and washer.
Show More Show Less
ECS Tuning Baffled Oil Catch Can - 6oz
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
For use with custom plumbing and ECS universal mounting bracket kit
ECS - Corporate Logo
T#:17140141
Part#: 003779ECS05-01
In Stock
Sale - Save 33% $ 238.99

This product was last offered at the strikethrough price on
11-07-2026

$ 160.99 USD
Free Shipping on orders $49 and up
Sale - Save 33%
$ 238.99

This product was last offered at the strikethrough price on
11-07-2026

$ 160.99 USD
Free Shipping on orders $49 and up

Meet modern emission regulations while preserving engine performance with the ECS Baffled Oil Catch Can. Designed for BMW and MINI vehicles, this system efficiently captures blow-by gases, preventing excessive oil vapor ingestion into the intake tract. The innovative 4-chamber baffle system maximizes oil/air separation, reducing carbon build-up and pollutants. Featuring a 1/4" drain fitting for easy maintenance, this catch can minimizes oil deposits, ensuring cleaner emissions and enhanced engine performance.

Key Benefits:

  • Efficient 4-chamber baffle system for maximum oil/air separation
  • Recirculated design reduces oil ingestion, promoting cleaner emissions
  • Durable 6061-T6 billet machined body with anodized black finish for longevity
  • Integrated dipstick and sealed reservoir for easy oil inspection and maintenance
  • Serviceable design with removable baffle plates for cleaning
  • Easy installation with customizable mounting options and leak-free fittings
  • Engineered and manufactured in the USA for superior performance and durability

Note: Not for sale or use in the state of California on any pollution-controlled vehicle as per the California Air Resources Board.

Show More Show Less


Genuine BMW Coolant Hose - Radiator to Oil Cooler
For vehicles with automatic transmission
Genuine BMW - Corporate Logo
T#:45922
Part#: 17117541143
In Stock
6% off MSRP $ 64.74

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 64.74

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD
Free Shipping on orders $49 and up


Genuine BMW Hose, Radiator-Engine Oil Cooler -
This item fits the following BMW Chassis:
E82,E89 Z4,E90,E92,E93

Fits BMW Engines including:
N54,N54T,N55

Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:5122280
Part#: TRIPLECAPRED1
In Stock
$ 209.99 USD
Free Shipping
$ 209.99 USD
Free Shipping
Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.
Show More Show Less
E82 135i, E9X 335i, E60 535i ECS Baffled Oil Catch Can
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
ECS - Corporate Logo
T#:388332
Part#: 003779ECS05A0
In Stock
Sale - Save 10% $ 238.99

This product was last offered at the strikethrough price on
11-07-2026

Starting at $ 215.09 USD
Free Shipping
Sale - Save 10%
$ 238.99

This product was last offered at the strikethrough price on
11-07-2026

Starting at $ 215.09 USD
Free Shipping

Oil venting and circulation continues to be a problem on BMW engines and now even more so on the turbocharged N54 and N55 engines. The existing stock system does a very poor job of separating fluid and vapor and this leads to an oily film or even small pools of oil throughout the turbos and intake. We're seeing a lot more 135 and 335 cars with drivability and performance issues because oil has sneaked by the ring seals and is coating the intake piping, intercooler, intake valves, and other critical areas. The problem is worsened with higher boost levels. Oil is excellent for lubricating moving parts but terrible when it gets into the combustion chamber, effectively lowering the octane rating and reducing performance. Our own shop has gone the extra step and offers media blasting of the intake valves to strip away the oily buildup we have seen.

Our shop also strongly recommends an oil catch can be installed in the line for the crankcase vent. The oil catch can traps oil as it leaves the valve cover and holds it in a canister. Whatever minimal vapors are left over in the oil is then vented back through the canister and into the intake where it is safe to be burned up in the engine or recirculated back through the system again. This is the way the system was designed! At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil. A dipstick is integrated into the cap so you can monitor the oil level. Installing one of these will avoid costly repairs in the future and help maintain your boost and performance. It's one of the smartest modifications you can make because it demonstrates a well-thought out tuning strategy and care for the condition of your engine.

The ECS Oil Catch Can is made from aluminum and with a stealthy black anodized finish. Multiple brackets are available so you're not limited on where to mount it. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). The ECS OCC also has a factory-like appearance.

Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles.

ECS Oil Catch Can Features:
+ Increases air intake efficiency
+ Promotes engine longevity
+ 4 chamber design promotes excellent air/oil separation
+ Large In/Out ports (no tapered sizes that slow flow)
+ Anodized black lightweight aluminum
+ Made in USA

This item fits the following BMWs with the N54 twin-turbo engine:
2008-2010 E82 BMW 135i
2007-2010 E9X BMW 335i 335xi
2006-2010 E60 BMW 535i 535xi

Show More Show Less

URO Oil Pan Filter Kit
For vehicles with production date from 09/2010, only for ZF automatic transmission GA6H... Also use- (Qty.) (24) pan bolts 24 11 7 552 108. Kit used for Aluminum oil pan part# 24 15 2 333 907 PRM. Contains: (Qty.) (1) Oil filter kit, (1) Oil Pan Gasket, (1) Filter O-Ring, (2) Drain P... For Automatic Transmission GA6HP19Z.
2X Entries Into Our F80 M3 Sweepstakes 2X Entries For Our Spin To Win Sweepstakes!
URO - Corporate Logo
T#:596312
Part#: 24152333907K
Ships in 1 Business Day
$ 93.99

This product was last offered at the strikethrough price on
08-07-2026

$ 85.99 USD
Free Shipping
$ 85.99 USD
Free Shipping
This URO kit replaces the transmission pan filter, gaskets, seals, and plugs on the URO metal transmission pan (part number URO-011920).

Mann - Corporate Logo
T#:374815
Part#: 11427837997KT3
In Stock
$ 142.99 USD
Free Shipping
$ 142.99 USD
Free Shipping
Stock up on oil filters and save some cash! You are going to need them, why not get a discount? This is an OEM Mann oil filter kit made with the same materials and design as the original oil filter used in BMW dealers (but at a better price!). The kit includes the oil filter, housing cap o-ring, and washer.
Show More Show Less
Genuine BMW - Corporate Logo
T#:35069
Part#: 11417613549
Ships in 1-2 days
9% off MSRP $ 783.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 716.99 USD
Free Shipping
9% off MSRP
$ 783.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 716.99 USD
Free Shipping


Genuine BMW Oil Pump -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N55

Show More Show Less

Elring Oil Pan Gasket And CRP Hardware Set
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Packaged by Turner - Corporate Logo
T#:56218592
Part#: 1137548031ELRKT2
In Stock
New Item
Sale - Save 20% $ 86.99

This product was last offered at the strikethrough price on
11-07-2026

$ 69.26 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 86.99

This product was last offered at the strikethrough price on
11-07-2026

$ 69.26 USD
Free Shipping on orders $49 and up
This Oil Pan Refresh Kit pairs a high tier Elring sealing gasket with the complete factory spec aluminum bolt set required for proper reassembly.
AUTOTECKNIC - Corporate Logo
T#:39971047
Part#: BM-0007
In Stock
Sale - Save 10% $ 64.99

This product was last offered at the strikethrough price on
11-15-2026

$ 58.49 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 64.99

This product was last offered at the strikethrough price on
11-15-2026

$ 58.49 USD
Free Shipping on orders $49 and up
a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.

Genuine BMW - Corporate Logo
T#:372183
Part#: 11427837997
In Stock
$ 142.99 USD
Free Shipping
$ 142.99 USD
Free Shipping
This is a pack of 5 Genuine BMW oil filters for the E9X M3 with the S65 engine. Each filter box includes a new filter, seal, and o-ring.

Genuine BMW - Corporate Logo
T#:35056
Part#: 11417584989
Ships in 1-2 days
3% off MSRP $ 246.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 239.99 USD
Free Shipping
3% off MSRP
$ 246.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 239.99 USD
Free Shipping


Genuine BMW Hydraulic Valve -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F10

Fits BMW Engines including:
N55

Oil Filter Housing Gasket Replacement Kit - BMW N54 N55 3.0L ...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Packaged by Turner - Corporate Logo
T#:24344808
Part#: N54OFHGKT
In Stock
Sale - Save 14% $ 206.99

This product was last offered at the strikethrough price on
11-07-2026

$ 178.88 USD
Free Shipping on orders $49 and up
Sale - Save 14%
$ 206.99

This product was last offered at the strikethrough price on
11-07-2026

$ 178.88 USD
Free Shipping on orders $49 and up
If you have a leaking oil filter housing seal, why not replace it while doing an oil service? This kit includes an Oil service kit along with an oil filter housing gasket and thermostat housing gasket.
Show More Show Less
Mishimoto - Corporate Logo
T#:23020165
Part#: MMBCC-CBTWO
Ships in 1 Business Day
Sale - Save 10% $ 160.99

This product was last offered at the strikethrough price on
11-19-2026

$ 144.85 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 160.99

This product was last offered at the strikethrough price on
11-19-2026

$ 144.85 USD
Free Shipping on orders $49 and up

Optimize your vehicle's performance and shield crucial components with the Mishimoto Compact 2-Port Baffled Oil Catch Can. This innovative solution effectively separates oil particles from PCV/CCV air using a 50-micron bronze filter, ensuring defense against oil blow-by for your intercooler, intake system, and vital parts. Constructed with a patented billet 6061 aluminum can sealed with Viton™ O-Rings, this catch can guarantees both durability and effectiveness.

Equipped with a universal mounting bracket, it allows adaptable installation and comes complete with two CNC-machined aluminum 1/2" barbed hose fittings. With an enhanced 3 oz internal capacity, service intervals are prolonged, while its fully serviceable filter and can ensure enduring functionality.

Engineered for safety in pressurized applications, the internal air diverter enhances oil separation by amplifying air turbulence. Available in black, red, or polished finishes, this catch can preserves proper octane levels, reducing potential detonation and promoting extended engine life.

The product package includes the Compact 2-Port Baffled Oil Catch Can, two Aluminum 1/2" Barbed Fittings, and a Universal Mounting Bracket, all backed by the Mishimoto Lifetime Warranty.

WARNING! Prop 65 may apply to this product.

Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to all companies selling products in California.

Prop 65 mandates listing any chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm.

For more information about California Prop 65 warning, visit: www.P65Warnings.ca.gov.

Show More Show Less


Mishimoto Universal 10 Row Oil Cooler
For custom applications only. Not a direct bolt on.
Mishimoto - Corporate Logo
T#:378421
Part#: MMOCU
In Stock
Sale - Save 10% $ 410.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 369.86 USD
Free Shipping
Sale - Save 10%
$ 410.99

This product was last offered at the strikethrough price on
11-19-2026

$ 369.86 USD
Free Shipping
This universal oil cooler from Mishimoto is far superior to the factory unit with its 11" x 2.76" x 1.97" core. Even under optimum driving conditions increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated. With this new oil cooler, you can keep your oil temperatures down for optimum driving conditions. The kit includes 4 feet of stainless braided line, adapter fittings, and oil filter sandwich adapter. Mishimoto Automotive is a leading manufacturer of aftermarket performance cooling products. The company was established back in 2003 with one goal. That goal was to provide customers with quality cooling system upgrades that work on the track and on the road. At Mishimoto, you never have to worry about the quality of the product you are installing. This kit is universal and is not a direct bolt on. *For custom applications only. Not a direct bolt on. WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:51778141
Part#: VTT-N54-OFA
Ships in 10 Business Days
$ 41.99 USD
Free Shipping
$ 41.99 USD
Free Shipping
The Vargas Oil Feed Adapter is designed to replace the stock front turbo oil feed line with a robust, CNC-machined solution.