BMW Suspension Parts for BMW 3 Series E90 (2006-2011)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

H&R Race Spring Set - E90, E92 Coupe, Sedan
Average lowering of 2.0"F 1.5"R
5X Entries For Our Spin To Win Sweepstakes!
We Price Match - Give Us A Call or Chat!
H&R - Corporate Logo
T#:1263
Part#: 50490-88
In Stock
15% off MSRP $ 389.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 330.99 USD
Free Shipping
15% off MSRP
$ 389.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 330.99 USD
Free Shipping
Front Lowering: -2.0"
Rear Lowering: -1.5"

A lower and stiffer spring compared to the standard Sport springs and that will make the car handle better with less bodyroll and with more aggressive looks.

This item fits the following BMWs:
2006+ E90 BMW 325i 328i 330i 335d 335i - Sedan
2007+ E92 BMW 328i 335i 335is - Coupe
Show More Show Less
Powerflex Polyurethane 26.5mm Front Sway Bar Bushing Set - E82 E88 E9...
For models produced up to 05/2010
2X Entries For Our Spin To Win Sweepstakes!
For models produced up to 05/2010
Powerflex - Corporate Logo
T#:376522
Part#: PFF5-4602-26.5X2
In Stock
$ 70.99 USD
Free Shipping
$ 70.99 USD
Free Shipping

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Show More Show Less
Genuine BMW - Corporate Logo
T#:55059
Part#: 31336759452
Ships on Nov 23, 2026
5% off MSRP $ 31.50

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 29.99 USD
Free Shipping on orders $49 and up
5% off MSRP
$ 31.50

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 29.99 USD
Free Shipping on orders $49 and up


Genuine BMW Upper Spring Plate -
This item fits the following BMW Chassis:
E83 X3,E89 Z4,E90,E92


E9X / F3X RWD Ride Height Adjuster Shim - PFR5-427
2X Entries For Our Spin To Win Sweepstakes!
Powerflex - Corporate Logo
T#:22163423
Part#: PFR5-427
In Stock
$ 44.99 USD
Free Shipping on orders $49 and up
Achieving an even ride height, particularly in rear-wheel-drive (RWD) vehicles, is vital for enhancing stability, handling, and overall performance. Replacing your stock adjuster shim with a Powerflex RWD Ride Height Adjuster Shim provides a dependable solution. In this article, we'll explore the numerous benefits of this upgrade, meticulously designed to level your vehicle and boost its performance. Enhanced Vehicle Balance: Uneven ride height can lead to imbalances in handling, resulting in reduced stability on the road. By opting for the Powerflex RWD Ride Height Adjuster Shim, you'll experience a more balanced ride, ultimately improving your vehicle's stability and road-handling capabilities. Precision in Handling: Achieving the ideal ride height is essential for precise handling. Replacing your stock shim with Powerflex's high-quality alternative enhances the precision of your vehicle's handling. This is especially critical for RWD vehicles that rely on rear-wheel traction for performance and control. Enhanced Comfort on the Road: Uneven ride height can contribute to discomfort during your drive, causing vibrations and instability. The Powerflex RWD Ride Height Adjuster Shim replacement effectively resolves these issues, resulting in a smoother and more comfortable ride. Whether you're on a long journey or navigating your daily commute, you'll appreciate the enhanced comfort. Longevity and Durability: Powerflex is synonymous with top-tier quality. The RWD Ride Height Adjuster Shim is crafted from high-quality materials, ensuring both durability and an extended service life. By minimizing wear and tear on your suspension components, this upgrade can prolong the lifespan of your vehicle's suspension system and related parts. OE / OEM Cross Reference Numbers: 33536769473
Show More Show Less

TRW - Corporate Logo
T#:348929
Part#: 33322283546
In Stock
$ 138.65

This product was last offered at the strikethrough price on
10-22-2026

$ 67.36 USD
Free Shipping on orders $49 and up
$ 67.36 USD
Free Shipping on orders $49 and up

TRW is a trusted OEM supplier for control arms. Turner Motorsport trusts these as replacement parts for BMW.

 

33322283546

KMAC - Corporate Logo
T#:389645
Part#: 192416-1J
In Stock
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less

Genuine BMW - Corporate Logo
T#:54441
Part#: 31302283444
In Stock
2% off MSRP $ 41.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 41.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD
Free Shipping on orders $49 and up


Genuine BMW Additional Shock Absorber, Front -
This item fits the following BMW Chassis:
E90,E92,E93

SuperPro - Corporate Logo
T#:26704960
Part#: TRC10200
In Stock
Sale - Save 30% $ 165.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 116.19 USD
Free Shipping on orders $49 and up
Sale - Save 30%
$ 165.99

This product was last offered at the strikethrough price on
11-10-2026

$ 116.19 USD
Free Shipping on orders $49 and up

TRW - Corporate Logo
T#:341238
Part#: 33322283548
In Stock
$ 149.99 USD
Free Shipping
$ 149.99 USD
Free Shipping
Connects the spindle assembly to the rear subframe

034 Motorsport Billet Adjustable Sway Bar End Links - Rear - BMW E82/...
2X Entries Into Our F80 M3 Sweepstakes 2X Entries For Our Spin To Win Sweepstakes!
034Motorsport - Corporate Logo
T#:5028754
Part#: 034-402-4035
Ships in 5 Business Days
Sale - Save 10% $ 179.00

This product was last offered at the strikethrough price on
11-15-2026

$ 161.10 USD
Free Shipping
Sale - Save 10%
$ 179.00

This product was last offered at the strikethrough price on
11-15-2026

$ 161.10 USD
Free Shipping
Replace your flimsy, imprecise OEM sway bar end links with the performance engineered 034Motorsport Billet Adjustable Rear Sway Bar End Link Kit from 034Motorsport for all E9X M3 and 3 Series, and E8X 1M and 1 series. Designed to improve handling, road feel, and steering response, 034Motorsport's Billet Adjustable Rear Sway Bar End Links allow for the uncompromised transfer of suspension energy and movement to the sway bar. With its adjustable length design, the 034Motorsport Billet Adjustable Rear Sway Bar End Links allow for lowered vehicles to maintain proper preload on the sway bar. 034Motorsport sway bar end links are the only options on the market with high misalignment spherical joints, ensuring that the end links do not bind as the suspension articulates.
Show More Show Less
Race Polyurethane Rear Upper Shock Mount Set - E8X, E9X
For vehicles without EDC
2X Entries For Our Spin To Win Sweepstakes!
Powerflex Black Series - Corporate Logo
T#:376435
Part#: PFR5-416BX2
In Stock
$ 90.99 USD
Free Shipping
$ 90.99 USD
Free Shipping

Rear shock mounts are tasked with securing shocks while absorbing noise, vibration and harshness that would otherwise be associated with a solid mount. Factory rubber bushings are a compromise between a cushy ride and responsive handling.

Powerflex polyurethane rear shock mounts are firmer than OEM bushings, resulting in better handling, a more responsive rear-end, and more efficient suspension articulation - all with minimal sacrifice to ride quality.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.

This part fits the following BMWs:
E8X, E9X All

Show More Show Less
Front Upper Strut Mount - 31336775097
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Bremmen Parts - Corporate Logo
T#:36676174
Part#: 31336775097
In Stock
Sale - Save 30% $ 37.99

This product was last offered at the strikethrough price on
11-07-2026

$ 26.59 USD
Free Shipping on orders $49 and up
Sale - Save 30%
$ 37.99

This product was last offered at the strikethrough price on
11-07-2026

$ 26.59 USD
Free Shipping on orders $49 and up

The strut mount is a critical suspension component that provides a secure mounting point and pivot for your BMW's front strut. With higher mileage, the built-in bearing can wear out, leading to reduced suspension performance, increased noise, and compromised handling.

For optimal suspension function and durability, it’s recommended to replace the strut mounts whenever installing new front struts. Choose this premium replacement from Bremmen Parts for a reliable and long-lasting repair.

Show More Show Less


Turner Motorsport Spherical Rear Upper Shock Mounts - E9x E8x non-M ...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Improve shock efficiency and increase shock travel on lowered BMWs!
Turner Motorsport - Corporate Logo
T#:556649
Part#: 010019TMS01
In Stock
$ 352.99 USD
Free Shipping
$ 352.99 USD
Free Shipping
No matter whether your E9x or E8x is N52, N54, or N55 powered, your rear upper shock mounts (33506771738) will fail. We set out to design the ultimate performance spherical monoball rear upper shock mount, and we believe we have exactly that. Our monoball rear upper shock mounts eliminate any unwanted deflection, maximizing shock efficiency and performance - this means full body shock body articulation, reducing side loading and improving shock wear. Our Turner Motorsport rear upper shock mounts also offer flexibility in shock position - our kit enables you to either raise your shock position by 7.5mm or lower it by 4.5mm. We recommend running the raised 7.5mm for increased shock travel on lowered vehicles. On the other hand, if you're looking to retain bump stops, washers, and shock boots, you can run the 4.5mm lowered shock position. NOTE: You may experience a slight increase in NVH when using our monoball rear upper shock mounts, but we think it is justified by the eliminated deflection and setup flexibility offered by this kit. Design features: Billet CNC 6061-T6 aluminum, type III anodized for exceptional durability and corrosion resistance Teflon lined spherical bearing Self-lubricating PTFE liners are chemically bonded to the inner diameter of the race to offer a very high load-carrying capacity with greatly increased dynamic wear characteristics. Bearing inserts are CNC machined 1144 steel, heat treated and melonite coated Maximize ball articulation while offering exceptional durability and corrosion resistance Static Axial Load Rating: 10,800 lbs. Rod End Misalign Angle: 6 degrees Fully rebuildable Made in USA!
Show More Show Less
Sway Bar Bushing Bracket (Rear)
2X Entries Into Our F80 M3 Sweepstakes 2X Entries For Our Spin To Win Sweepstakes!
URO - Corporate Logo
T#:37858397
Part#: 33556780707
In Stock
$ 21.99 USD
Free Shipping on orders $49 and up
$ 21.99 USD
Free Shipping on orders $49 and up
Rear sway bar crafted from durable stainless steel for superior strength and corrosion resistance, unlike OEM mild steel.
Front Upper and Lower Control Arm Monoball Upgrade - Left And Right -...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Turner Motorsport - Corporate Logo
T#:386421
Part#: E9X0031313TKT
Back Ordered
Sale - Save 20% $ 1,143.99

This product was last offered at the strikethrough price on
11-07-2026

$ 915.19 USD
Free Shipping
Sale - Save 20%
$ 1,143.99

This product was last offered at the strikethrough price on
11-07-2026

$ 915.19 USD
Free Shipping

M3 upper and lower control arms are a known upgrade for non-M E82 and E9X chassis. But our Monoball Thurst Arms are even more of an upgrade over the stock M3 arms. This package bundles the Turner Monoball upper thrust arms with the stock M3 lower control arms. If there's one big fail point in the E82/E9X front suspension it's the thrust arms. The front inner thrust arm bushing is filled with dampening fluid that leaks over time. Once it's gone the bushing has the strength of a rubber band. Even though we sell two types of upgraded rubber bushings there was still room for improvement. For someone looking for superior performance and longevity these sealed monoball bushings are the best out there. 

The advantage of a monoball bearing is that it will not deflect under load. All of the rubber bushings, including the M3, move in all sorts of directions and that changes your alignment, especially when used with big brake kits or when driven hard. And when worn out, performance suffers. Our monoball sits in a CNC machined aluminum housing which has zero deflection. The monoball allows complete freedom of movement but only at the desired angles. What you get is superior steering precision, better handling from more consistent alignment, and almost infinite bushing life. And thanks to the inner liner and sealed rubber boots there's none of the extra noise or reduced service life of fully solid race bushings.

The lower M3 control arm bushings use a similar sealed monoball bushing instead of rubber. This package gives you monoball precision and performance with OE-quality components.

This item fits the following BMWs: 
2008-2012 E82 BMW 128i 135i 1M Coupe 
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan 
2006-2012 E91 BMW 328i - Wagon 
2007-2013 E92 BMW 328i 335i 335is M3 - Coupe 
2007-2013 E93 BMW 328i 335i M3 - Convertible 
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is 

Show More Show Less

H&R Swaybar Bushing - 23mm - E9X M3
5X Entries For Our Spin To Win Sweepstakes!
We Price Match - Give Us A Call or Chat!
H&R - Corporate Logo
T#:193581
Part#: 71053-BUSH
Ships in 3 Business Days
$ 29.99 USD
Free Shipping
$ 29.99 USD
Free Shipping
H&R sway bar bushings feature a special urethane/Teflon composite that prevents squeaks and eliminates the need for lubrication. No mess, no maintenance, a perfect fit.

Sold individually

This item fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
Show More Show Less

Rear Upper And Lower Shock Mount Kit
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Packaged by Turner - Corporate Logo
T#:5498488
Part#: 33506767010KT
In Stock
Sale - Save 41% $ 145.99

This product was last offered at the strikethrough price on
08-28-2026

$ 86.84 USD
Free Shipping
Sale - Save 41%
$ 145.99

This product was last offered at the strikethrough price on
08-28-2026

$ 86.84 USD
Free Shipping
Includes all the necessary mounts to install new shocks on the rear of your BMW The following parts are included. Rear Lower Shock Mount (X2) Rear Upper Shock Mount - Upper Section (x2) Rear Upper Shock Mount - Lower Section (x2) Supporting Cup (x2) Sealing grommet (x2) All need bolts and nuts
Show More Show Less
M3/1M Front And Rear Control Arm Upgrade Kit
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Packaged by Turner - Corporate Logo
T#:5389743
Part#: 37142283867TMSKT
Ships in 1 Business Day
Sale - Save 13% $ 1,253.99

This product was last offered at the strikethrough price on
05-30-2026

$ 1,088.60 USD
Free Shipping
Sale - Save 13%
$ 1,253.99

This product was last offered at the strikethrough price on
05-30-2026

$ 1,088.60 USD
Free Shipping
Wanting more out of your BMW without having horrid ride quality? This is not only an extremely common handling upgrade, but one of the best upgrades you can do. These control arms are much sturdier than your factory units and feature much stiffer bushings and ball joints. Not only does this kit give you an extremely effective upgrade, it's the perfect excuse to get rid of your factory arms that are at the edge of being road worthy.
Show More Show Less

Genuine BMW - Corporate Logo
T#:61199
Part#: 33536767335
In Stock
10% off MSRP $ 44.26

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 39.95 USD
Free Shipping on orders $49 and up
10% off MSRP
$ 44.26

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 39.95 USD
Free Shipping on orders $49 and up


Genuine BMW Additional Shock Absorber, Rear -
This item fits the following BMW Chassis:
E90,E92,E93

Bilstein - Corporate Logo
T#:344197
Part#: 22-214294
In Stock
47% off MSRP $ 299.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 159.00 USD
Free Shipping
47% off MSRP
$ 299.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 159.00 USD
Free Shipping
Bilstein B4 Series gas pressure shocks and struts are specifically designed to be the economical choice for replacing the dampers on your vehicle. The B4 Series shocks and struts are rigorously engineered to meet OE standards and identically replicate the original ride quality of your vehicle. Shock dampening and rebound is set to match the original specifications from the factory to retain the same handling, stability, and ride comfort, but with the superior Bilstein quality for a long life and consistent performance in every condition. Lifetime warranty!
Show More Show Less

Powerflex Black Series - Corporate Logo
T#:383999
Part#: PFF5-1203-265BX2
In Stock
$ 74.99 USD
Free Shipping
$ 74.99 USD
Free Shipping

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
2008-2013 E9X BMW M3

Show More Show Less

OEM Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82 1M, E9X M3 (no...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Packaged by Turner - Corporate Logo
T#:11954
Part#: TMS11954
In Stock
Sale - Save 10% $ 51.44

This product was last offered at the strikethrough price on
11-07-2026

$ 46.40 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 51.44

This product was last offered at the strikethrough price on
11-07-2026

$ 46.40 USD
Free Shipping on orders $49 and up
A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 1M and E90/E92/E93 M3 consist of 4 pieces. These are the mounts to fit a non-EDC suspension.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
The lower mount on the 1M/M3 is integrated on the shock absorber.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces.

This item fits the following BMWs:
2011-2012 E82 BMW 1M
2008-2011 E90 BMW M3 - Sedan
2008-2012 E92 BMW M3 - Coupe
2008-2012 E93 BMW M3 - Convertible
Show More Show Less
Macht Schnell - Corporate Logo
T#:5351
Part#: TMS5351
Ships on Dec 14, 2026
$ 249.99

This product was last offered at the strikethrough price on
05-29-2026

$ 249.00 USD
Free Shipping
$ 249.00 USD
Free Shipping
For those wanting to move away from EDC for aftermarket suspension systems or coilover setups, the EDC monitoring can be a bit obtrusive as this type of monitoring is no longer required – resulting in numerous error messages thinking the system has malfunctioned. This EDC Emulation Module installs in less than 15 minutes and will fully emulate a fully active EDC environment when activated. Module can be activated/deactivated by via the integrated mini USB port within the module housing.

The Macht Schnell EDC Emulation Module is possible of the following features:
  • The ability to run aftermarket racing suspension/coilover setups in which EDC monitoring is not required
  • Compatible with iDrive and non-iDrive systems
  • Easy 15-minute installation process with no wire cutting
  • Proper emulation of the EDC monitoring system
  • No dealer visits or coding required after installation
  • Completely removable at any time

    Note: The Macht Schnell EDC Emulation Module will disable the EDC monitoring system supplied by BMW. Once disabled the behavior of the car will change and the driver will need to adjust his/her skill and technique. For this reason, this module is not intended for street vehicles and its use may result in injury or even death if proper conditions and procedures are not followed.
    Will not work on vehicles equiped with BMW's Dynamic Drive system.

    This item fits the following BMWs:
    2008-2011 E90 BMW M3 Sedan
    2008-2013 E92 BMW M3 Coupe
    2008-2013 E93 BMW M3 Convertible
    2006-2010 E60 BMW M5
    2006-2011 E63 BMW M6
    2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i
    2008+ E71 BMW X6 xDrive35i X6 xDrive50i
  • Show More Show Less
    Genuine BMW - Corporate Logo
    T#:368113
    Part#: 31336777636
    Ships in 1-2 days
    5% off MSRP $ 41.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 39.99 USD
    Free Shipping on orders $49 and up
    5% off MSRP
    $ 41.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 39.99 USD
    Free Shipping on orders $49 and up
    Bump stops play a vital role in preventing your dampers from bottoming out, prematurely causing failure especially when driving on rough roads often. If your bump stops are showing wear, replace them with Genuine BMW front bump stops and keep your dampers protected.
    Show More Show Less


    Genuine BMW - Corporate Logo
    T#:11955
    Part#: TMS11955
    Ships on Dec 21, 2026
    $ 140.99 USD
    Free Shipping
    $ 140.99 USD
    Free Shipping
    A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E90/E92/E93 M3 consist of 4 pieces. These are the mounts to fit cars equipped with the EDC suspension.

    Rear Shock Mount (RSM) Kit consists of:
    A. rear upper-top shock mounts, 33502283519
    B. rear upper-middle shock mounts, 33506767010
    C. rear upper-bottom shock mounts, 33502283518
    D. rear upper supporting cup, 33522283439 (sits over bumpstop)
    The lower mount on the M3 is integrated on the shock absorber.

    That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces.

    This item fits the following BMWs:
    2008-2011 E90 BMW M3 - Sedan
    2008-2012 E92 BMW M3 - Coupe
    2008-2012 E93 BMW M3 - Convertible
    Show More Show Less
    KMAC - Corporate Logo
    T#:389317
    Part#: 193616-2L
    Ships on Dec 18, 2026
    $ 545.00 USD
    Free Shipping
    $ 545.00 USD
    Free Shipping
    Location: Front
    Type: Street/Track, Stage 2
    Bearing: PTFE-lined pillow-ball with thin polyurethane bushing

    The Stage 2 KMAC plates are a mixed street/track camber/caster plate meant to be used in a variety of suspensions. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions. Bearing inserts and adapters included. The Stage 2 camber plates are shorter than a factory mount so may not be suitable for cars will little suspension travel. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Detailed instructions included.

    Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

    This item fits the following BMWs:
    2006-2008  E85 BMW  Z4 M Roadster M Coupe
    Show More Show Less
    Bilstein B6 Performance Rear Shock - E9x M3 with EDC
    10X Entries Into Our F80 M3 Sweepstakes
    Bilstein - Corporate Logo
    T#:182537
    Part#: 26-224572
    In Stock
    33% off MSRP $ 772.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 519.00 USD
    Free Shipping
    33% off MSRP
    $ 772.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 519.00 USD
    Free Shipping
    Replace the E9x M3's stock twin tube shocks with this high pressure monotube shock from Bilstein. Many E9X M3's came with the Electronic Damping Control system that adjusts each shock to suit the driving conditions for the best comfort and performance. While the system is technically advanced, the main weakness is that the stock twin tube shocks are susceptible to cavitation and fade in performance when pushed hard. The high pressure monotube design of the Bilstein shock effectively eliminates cavitation and ensures performance is always consistent. Additionally, these shocks are plug and play with the factory EDC system and retain all the functionally of the factory EDC system. Bilstein shocks are ideal for use with lowering springs.

    This item fits the following BMWs:
    2008-2012 E90 BMW M3 - Sedan - only for cars with EDC
    2008-2013 E92 BMW M3 - Coupe - only for cars with EDC
    2008-2013 E93 BMW M3 - Convertible - only for cars with EDC
    Show More Show Less

    Lemforder - Corporate Logo
    T#:13330
    Part#: 31126768818
    Ships in 1 Business Day
    $ 62.14 USD
    Free Shipping on orders $49 and up
    $ 62.14 USD
    Free Shipping on orders $49 and up

    Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Show More Show Less

    Genuine BMW - Corporate Logo
    T#:61448
    Part#: 33556780707
    Ships in 1-2 days
    9% off MSRP $ 38.88

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 35.23 USD
    Free Shipping on orders $49 and up
    9% off MSRP
    $ 38.88

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 35.23 USD
    Free Shipping on orders $49 and up

    This rear sway bar holds the sway bar bushing to the rear frame of your vehicle


    Genuine BMW Stabilizer Support
    This item fits the following BMW Chassis:
    E46 M3,E85 Z4M,E53 48IS,E46,E53 X5,E82,E83 X3,E85 Z4,E86 Z4,E90,E92,E93
     

     

    Show More Show Less
    Rear Differential Carrier Bushing - Front Position - E82,E90,E92,E93 ...
    This is an M specification bushing and is an upgrade for your vehicle
    Genuine BMW - Corporate Logo
    T#:13479
    Part#: 33312284019
    In Stock
    25% off MSRP $ 100.20

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 74.99 USD
    Free Shipping on orders $49 and up
    25% off MSRP
    $ 100.20

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 74.99 USD
    Free Shipping on orders $49 and up
    BMW M replacement bushing. Great stock replacement for M vehicles or as an upgraded to the non-M bushings.

    H&R Sport Spring Set - E90 SEDAN 325i/328i/330i
    Average lowering of 1.3" Front and 1.2" Rear
    5X Entries For Our Spin To Win Sweepstakes!
    We Price Match - Give Us A Call or Chat!
    H&R - Corporate Logo
    T#:1155
    Part#: 50490
    In Stock
    15% off MSRP $ 389.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 330.99 USD
    Free Shipping
    15% off MSRP
    $ 389.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 330.99 USD
    Free Shipping
    Front Lowering: -1.3"
    Rear Lowering: -1.2".

    Enhance the look of your BMW E90 3 series Sedan with a reduced fender well gap. H&R Sport Springs lower the vehicle center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. A lower wind resistance signature will make the vehicle more streamlined and improve gas mileage. If you are only looking to improve one part of your vehicle�s suspension, you cannot go wrong with installing Sport Springs. Fun to drive, H&R Sport Springs are the number one upgrade for your vehicle.

    We recommend installing Bilstein Sport shocks with these lowering springs..

    This item fits the following BMWs:
    2006+ E90 BMW 325i 328i 330i not for AWD models
    Show More Show Less
    Shocks and spring Installation Kit - E82 E88 E90 E92 E93 Non M ...
    10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
    Packaged by Turner - Corporate Logo
    T#:553668
    Part#: 31306775098KT2
    In Stock
    Sale - Save 9% $ 354.99

    This product was last offered at the strikethrough price on
    08-28-2026

    $ 322.73 USD
    Free Shipping
    Sale - Save 9%
    $ 354.99

    This product was last offered at the strikethrough price on
    08-28-2026

    $ 322.73 USD
    Free Shipping

    This kit is contains all new strut and shock mounts and hardware needed when installing a new shocks and struts or aftermarket suspension on your vehicle. 

    Fits the following BMW's

    E82/88 128i 135i

    E90/92/93 325i 328i 330i 335i 335is 

     

    Show More Show Less

    Bilstein - Corporate Logo
    T#:344198
    Part#: 22-214287
    In Stock
    47% off MSRP $ 299.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 159.00 USD
    Free Shipping
    47% off MSRP
    $ 299.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 159.00 USD
    Free Shipping
    Bilstein B4 Series gas pressure shocks and struts are specifically designed to be the economical choice for replacing the dampers on your vehicle. The B4 Series shocks and struts are rigorously engineered to meet OE standards and identically replicate the original ride quality of your vehicle. Shock dampening and rebound is set to match the original specifications from the factory to retain the same handling, stability, and ride comfort, but with the superior Bilstein quality for a long life and consistent performance in every condition. Lifetime warranty!
    Show More Show Less

    Febi Rear Lower Shock Mount - E82, E88, E90, E91, E92, E93
    We Price Match - Give Us A Call or Chat!
    Febi - Corporate Logo
    T#:374215
    Part#: 33526768544
    In Stock
    $ 28.99 USD
    Free Shipping on orders $49 and up
    Recommended replacement when replacing shocks
    Genuine BMW Rear Bump Stop & Bellow Kit - E9X
    For vehicles with sport suspension
    Genuine BMW - Corporate Logo
    T#:543622
    Part#: 31302405872
    In Stock
    5% off MSRP $ 33.63

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 31.99 USD
    Free Shipping on orders $49 and up
    5% off MSRP
    $ 33.63

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 31.99 USD
    Free Shipping on orders $49 and up

    Ensure smooth and comfortable rides for your BMW E9X with Turner Motorsport's Genuine BMW Rear Bump Stop & Bellow Kit, part number 31302405872. Over time, rear bump stops and bellows can wear out, leading to decreased ride quality and potentially causing damage to other suspension components. Designed to OE specifications, this kit guarantees a perfect fit and reliable performance for your BMW.

    • Genuine BMW quality assurance
    • Restores ride comfort and stability
    • Prevents damage to other suspension components
    • Easy installation with direct fit design
    • Ensures optimal performance and longevity
    Show More Show Less
    SPL Parts - Corporate Logo
    T#:553735
    Part#: SPLREE9X
    In Stock
    $ 224.10 USD
    Free Shipping
    $ 224.10 USD
    Free Shipping

    These SPL Parts adjustable rear sway bar end links replace OEM part number 33556764428

    SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

    Aftermarket sway bars and aggressive driving exact a punishing toll on your sway bar end links, often causing them to snap or bend. To combat this, pick up these SPL Pro Adjustable end links that are much stronger than stock and are also allow for adjustments to best suit your suspension configuration. These also allow for you to set or eliminate preload quickly. SPL Pro rear end links utilize Teflon lined 1/2" FK  bearings that offer the highest load capacity possible.

    Technical specifications:

    • 6061 aluminum turnbuckles
    • left hand and right hand threaded rod ends 
    • Made in the USA!

    Fits the following BMWs:
    2006-2013 E9X BMW RWD Submodels
    2008-2013 E8X BMW All Submodels

    Show More Show Less


    ECS Coilover Damping Extensions - 220MM
    10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
    ECS - Corporate Logo
    T#:42369339
    Part#: 004673LA01
    In Stock
    Sale - Save 20% $ 37.99

    This product was last offered at the strikethrough price on
    11-07-2026

    $ 30.39 USD
    Free Shipping on orders $49 and up
    Sale - Save 20%
    $ 37.99

    This product was last offered at the strikethrough price on
    11-07-2026

    $ 30.39 USD
    Free Shipping on orders $49 and up

    Fine-tuning your coilover damping shouldn’t mean stripping out your rear seats or interior panels. On many applications, rear shock adjusters are hidden behind carpet, trim, or seatbacks, making quick adjustments a hassle.

    The ECS Rear Damping Extension Kit solves that problem with a clean and functional solution. These flexible extensions relocate the adjustment knobs to an easily accessible point above the rear shock towers, letting you dial in your suspension from inside the cabin, no disassembly required.

    Installation is straightforward: simply drill a small access hole in your interior trim and route the extension cables through. The adjustment knobs can be removed to allow the line to pass through smaller openings, minimizing cutting. For proper installation, be sure to fully loosen the set screw, insert the cable, then securely tighten it using the provided Allen key.

    Kit Includes:

    (2) Rear damping adjuster extension cables

    Installation hardware and Allen key

    A smart upgrade for track cars, daily drivers, or anyone who values easy access to suspension tuning, without compromising interior fit and finish.

    Show More Show Less
    H&R Sport Spring Set - E90/E92 M3 (2008+)
    For vehicles with or without the Competition Package
    5X Entries For Our Spin To Win Sweepstakes!
    We Price Match - Give Us A Call or Chat!
    H&R - Corporate Logo
    T#:361
    Part#: 29053-1
    In Stock
    15% off MSRP $ 489.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 415.99 USD
    Free Shipping
    15% off MSRP
    $ 489.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 415.99 USD
    Free Shipping
    Direct from Germany, H&R Springs are the highest quality sport springs available. This spring set will help firm up what many consider to be a fairly "soft" stock suspension (at least for a BMW "M" car). They will also make a subtle and noticeable visual improvement to the E90/E92 M3's stance, reducing the perceived fender gap of the stock ride height. This spring kit fits all 2008 and newer E90 sedan and E92 M3 coupe, with AND without electronic dampening control (EDC).

    Turner Motorsport E90 M3 with H&R Sport Springs We've installed these on our own 2008 M3 sedan project car (the white car pictured) and love the way these spring feel. They transform the handling into more of what (we feel) an M car should feel like -- sharp cornering with only a small sacrifice in ride quality. The ride is still very compliant and well suited for city streets, keeping the ride quality very close to the stock ride comfort� even with 20" wheels! Now that's a well engineered set of springs!

    M3 with Stock BMW Suspension
    Front Lowering 1.0"
    Rear Lowering 0.6"

    M3 with Competition Package
    Front Lowering 0.75"
    Rear Lowering 0.25"



    This item fits the following BMWs:
    2008+ E90 BMW M3 Sedan
    2008+ E92 BMW M3 Coupe
    Show More Show Less
    SPL Parts - Corporate Logo
    T#:553727
    Part#: SPLRTAELE9X
    In Stock
    $ 449.00 USD
    Free Shipping
    $ 449.00 USD
    Free Shipping

    These SPL Parts Adjustable Rear toe arms replace OEM Part number 33322406290

    SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

    When lowering your vehicle, toe alignment is thrown off. These SPL adjustable toe arms offer a wide range of toe adjustment and are a significant improvement over stock, eliminating suspension deflection and increasing handling response thanks to the FK Bushings rod ends that are Teflon lined. In addition, this kit includes Eccentric lockout components. This guarantees that your toe alignment won't slip under aggressive driving due to an eccentric bolt.

    Technical Specifications:

    • Gundrilled 2024 Aluminum Links to reduce unsprung weight
    • 6061 Aluminum Clamps and Heim Joint Spacers
    • Titanium Socket Head Cap Screws
    • Rotating clamp design allows for easy access to lock down your alignment settings
    • Low friction 3 piece Teflon lined FK Heim joints/rod ends made in Connecticut
    • 6061 Aluminum Eccentric Lockout Washers
    • Grade 10.9 Hex Cap Bolts with Lock Nuts
    • Made in the USA!

    Fits the following BMWs:
    2006-2013 E9X BMW RWD Non-M
    2008-2013 E8X BMW 128i 135i

    Show More Show Less

    Performance Adjustable Rear Toe Links - BMW E82/88 128/135, E9X 323/3...
    10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
    Turner Motorsport - Corporate Logo
    T#:5471053
    Part#: 00501TMS012
    In Stock
    Sale - Save 17% $ 507.99

    This product was last offered at the strikethrough price on
    11-07-2026

    $ 420.99 USD
    Limited Qty Sale
    Free Shipping
    Sale - Save 17%
    $ 507.99

    This product was last offered at the strikethrough price on
    11-07-2026

    $ 420.99 USD
    Limited Qty Sale
    Free Shipping
    The stock Genuine BMW rear toe links (33322406290) are great for standard daily driving and occasional spirited driving, but they tend to fall flat on the track due to the soft rubber bushings causing excess deflection, creating undesirable handling characteristics, not to mention insufficient adjustability. Turner's new Performance Rear Toe Links increase stability and response by eliminating bushing deflection while providing an increased range of rear toe adjustment, necessary for lowered cars or for performance alignments. Even small changes to ride height and camber will effect toe settings, and the wide range of adjustment allows you to maximize grip on a track car and extend tire life on a street car. The factory rear toe arms utilize an eccentric bolt and washer for adjustment and lack precision and range. These toe links feature gun drilled 2024 Aluminum center links, clamps, and clevises, along with a 360-degree rotating clamp system. This combination provides superior strength, performance, durability, and ease of adjustment. No annoying jam nuts! A simple 3/16" Allen-key is all that is required to lock down your alignment settings. FK Spherical Rod Ends are utilized to reduce alignment change in the rear suspension under hard cornering, acceleration, and braking. They feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminate bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race, offering a very high load carrying capacity and greatly increased dynamic wear characteristics. Rear Toe Links Features: Gun drilled 2024 Aluminum Links to reduce unsprung weight 6061-T6 Aluminum Rotating Clamp design Low friction 3-piece Teflon lined FK Heim joints/Rod Ends Sold as a pair Made in the USA
    Show More Show Less

    URO Front Suspension Refresh Kit - BMW E46
    2X Entries Into Our F80 M3 Sweepstakes 2X Entries For Our Spin To Win Sweepstakes!
    URO - Corporate Logo
    T#:349590
    Part#: E46-8PCKIT
    In Stock
    $ 435.00

    This product was last offered at the strikethrough price on
    10-01-2026

    $ 358.99 USD
    Free Shipping on orders $49 and up
    $ 358.99 USD
    Free Shipping on orders $49 and up
    Revive the suspension on your E46 and get your car back on the road
    Sidem Front Tension Strut - Left - E82 1M, E9X M3
    2X Entries For Our Spin To Win Sweepstakes!
    Sidem - Corporate Logo
    T#:47439423
    Part#: 31102283575
    In Stock
    $ 87.99 USD
    Free Shipping on orders $49 and up
    This is the front upper left control arm with the outer ball joint pointing down. This replacement fits E82 1M Coupe and E90/E92/E93 M3 models. This control arm includes the inner, pressed-in bushing and outer ball joint. This part can also be used as an upgrade on non-M E82, E9X, and E89 Z4 models. The inner bushing on the M3 arm is a solid rubber instead of the fluid-filled non-M design. This solid rubber part will last longer and be more responsive thanks to less deflection in the bushing. The M3 arm is a direct replacement for the stock non-M part.
    Show More Show Less

    Febi Rear Bump Stop - Set of 2 - E82, E88, E90, E92
    For vehicles with standard suspension only
    We Price Match - Give Us A Call or Chat!
    Febi - Corporate Logo
    T#:382616
    Part#: 33536767334
    In Stock
    $ 22.99 USD
    Free Shipping on orders $49 and up
    $ 22.99 USD
    Free Shipping on orders $49 and up
    Covers the rear shock. Made in Germany! Sold as a Pair.
    Lemforder - Corporate Logo
    T#:398629
    Part#: 33312283383
    Ships on Mar 12, 2027
    $ 69.99

    This product was last offered at the strikethrough price on
    11-04-2026

    $ 65.99 USD
    Free Shipping on orders $49 and up
    $ 65.99 USD
    Free Shipping on orders $49 and up

    Exposure to the elements and stress/pressure can lead to failing and splitting subframe bushings. Ensure your subframe is mounted perfectly steady to prevent vibrations, knocks, suspension issues, and potential damage to the body of the vehicle or suspension components. OEM Lemforder is the perfect replacement to make sure that everything is mounted properly.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    This item fits the following BMW Chassis:
    E82, E90, E92, E93

    Show More Show Less

    ECS Performance Rear Sway Bar - 15mm - E9X E82/88 Non-M
    10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
    ECS - Corporate Logo
    T#:363189
    Part#: 007278ECS02A
    In Stock
    Sale - Save 25% $ 244.99

    This product was last offered at the strikethrough price on
    11-07-2026

    $ 183.74 USD
    Free Shipping
    Sale - Save 25%
    $ 244.99

    This product was last offered at the strikethrough price on
    11-07-2026

    $ 183.74 USD
    Free Shipping
    Looking to improve your car's handling in the corners? ECS Tuning's rear non-adjustable sway bar is a cost-effective way to limit body roll and keep your wheels planted when entering a corner at higher speeds. Sway bars are a great way to improve handling without sacrificing ride quality or reliability! Sway bars are typically sold as a front and rear set to balance the handling. But a rear sway bar only can also have excellent benefits, especially on a street car. Going with a larger rear bar will improve steering and handling even at low-moderate speeds. ECS has specified a 15mm sway bar that has been fine-tuned for use on the E9X and E82 models. Urethane bushings with a reinforced inner core that requires no lubrication are included.
    Show More Show Less

    Sidem Front Control Arm - Right - E82 1 M Coupe, E9X M3
    2X Entries For Our Spin To Win Sweepstakes!
    Sidem - Corporate Logo
    T#:47439422
    Part#: 31102283578
    In Stock
    $ 89.99 USD
    Free Shipping on orders $49 and up
    Replacement control arm for the E9X M3 and E82 1 M Coupe, often used as upgrades for Non-M models!
    Bilstein - Corporate Logo
    T#:2596
    Part#: BE5-C039-H0
    In Stock
    33% off MSRP $ 242.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 163.00 USD
    Free Shipping
    33% off MSRP
    $ 242.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 163.00 USD
    Free Shipping
    Position: Rear, left or right
    Setting: Performance, for stock suspensions

    Rear Bilstein B6 Performance shock. Performance shocks are for cars with the standard, factory suspension. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. Includes top nut, stock dust boot is re-used. Price is per shock.

    This Bilstein B6 Performance rear shock fits the following BMWs:
    2006+ E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
    2007+ E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
    2007+ E93 BMW 328i 335i - Convertible
    Show More Show Less
    IRP - Individual Racing Parts - Corporate Logo
    T#:587022
    Part#: IRPRSM-90B
    Ships in 6 Business Days
    $ 195.00 USD
    Free Shipping
    $ 195.00 USD
    Free Shipping
    The stock rubber lower shock mounts tend to fail prematurely, especially when subjected to rough track conditions. These IRP lower shock mounts utilize a monoball design that is significantly stronger and helps to eliminate deflection that is caused by soft rubber. Key Benefits: Monoball rear lower shock mount eliminates unwanted deflection, maximizing shock efficiency and performance. Allows full shock body articulation for low friction movement and reduced side loading and improved shock wear. Designed to work with stock non-M taper seat stud style shocks (not M eyelet mount type). Maintains OE shock position
    Show More Show Less


    M3/1M Upper Control Arm Upgrade Kit - Rear
    These control arms are standard OE style replacement for M vehicles
    TRW - Corporate Logo
    T#:341241
    Part#: 33322283547KT4
    Ships in 1 Business Day
    $ 596.99

    This product was last offered at the strikethrough price on
    10-08-2026

    $ 514.99 USD
    Free Shipping
    $ 514.99 USD
    Free Shipping
    These M3 rear guide rod arms are an upgrade for the non-M cars. The stock non-M arms are made from sheetmetal spot welded together at the ends. The arm tends to flex and bend under even moderate cornering loads. Factor in gripper tires and more torque and this arm is inadequate for stability and consistent handling. The M3 arms are one piece of aluminum offering greater strength and with a sealed monoball inner bushing that allows the arm to rotate (instead of twisting). 
     
    Show More Show Less
    Genuine BMW - Corporate Logo
    T#:60605
    Part#: 33502283518
    In Stock
    22% off MSRP $ 33.41

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 26.00 USD
    Free Shipping on orders $49 and up
    22% off MSRP
    $ 33.41

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 26.00 USD
    Free Shipping on orders $49 and up
    Genuine BMW GUIDE SUPPORT, LOWER PART