BMW Tools & Specialty Equipment for BMW 3 Series E90 (2006-2011)

A perfect collection of hex head sockets compiled in a case that's always ready to go.

Features:

• High strength hex driver set, in 3/8 and 1/2-inch drive, is rugged enough for professional use and includes 4, 4.5, 5.5, 6, 8, 12, 14, and 17mm sizes
• Conveniently housed in a sturdy blow molded case for portability and easy organization.

The impact driver is a fast and effective way to remove tight or corroded screws and bolts, reducing the chance of rounding off--or rounding out--the fastener head. Insert a slotted or Phillips head screwdriver bit into the driver.

For stubborn bolts, remove the black screwdriver bit adapter head, and replace it with any 3/8 - inch drive socket.

Features:

• Impact driver tool with red rubber grip 
• Four screwdriver bits (2 Phillips; 2 slotted) 
• 3/8 - inch drive bit holder

• Tough and rigid expanded polystyrene foam (EPS) with a load rating of 1,500lbs per wheel (almost twice what the normal corner weight would be on a 3-series BMW)
• 12" height X 12" width with minimal compression under load
• Light weight with each block weighing less than 6lbs and with a handy strap for carrying or hanging
• Curved cradle for the tire to sit inside
• Non-skid surface that won't scratch your floor

Looking for an alternative to your jack stands? With these wheel blocks you won't have to think twice about a jack stand scratching or denting the underside of your floor or the car falling off the jack stand. These work best when used with a floor jack under the subframe and the opposite axle wheels chocked. These are also a light weight and inexpensive alternative to the super-pricey plastic and metal ramps. They are resistant to most fluids and chemicals (but not solvents) and will never rust unlike metal ramps and blocks.

Also available in a 10" height.

The NOCO GBC003 Boost HD Precision Battery Clamps are heavy-duty clamps crafted for use with 12-volt gas and diesel engines. These clamps feature a needle-nose profile, allowing them to fit any shape or size battery terminal, from small terminals in tight spaces to top and side post batteries, as well as large terminal sizes. Their robust and rugged springs ensure maximum current flow with minimal power loss. Additionally, the Boost HD Precision accessory boasts no-melt and smoke-free properties, high current transferability, and reinforced all-metal construction.

Features: 

• Heavy-duty battery clamp designed for both 12-volt gas and diesel engines.
• Needle-nose clamp profile for jump starting hard-to-reach and oversized battery terminals.
• Made from durable, heat stabilized 8 AWG silicone wire that maintains its flexibility in cold weather environments.
• Engineered to efficiently transfer maximum current flow with minimal power loss.
• Compatible with the GB20, GB40, GB50, and GBX45 UltraSafe Lithium Jump Starters.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

The Foxwell TS5000 Tablet TPMS Service Tool is a mid-level tool designed to activate OEM/Universal TPMS sensors, retrieve comprehensive TPMS sensor data including sensor ID, tire pressure, temperature, battery condition, and OE part number. With the ability to relearn 98% of sensor IDs, program FOXWELL T10-sensors to replace old sensors, and even test Remote Keyless Entry Key Fobs, this tool offers a versatile solution for automotive professionals and enthusiasts alike.

Equipped with regular hardware and software updates, the Foxwell TS5000 Tablet TPMS Service Tool enables users to address automotive issues with enhanced precision and efficiency. It strikes the perfect balance between advanced TPMS diagnostic capabilities and affordability, making it the go-to choice for enthusiasts seeking top-notch performance without the usual high costs associated with TPMS tools.

Standout Features (How does it standout from previous models, i.e. the T1000/T2000?):

• Will allow you to connect to all sensors at once and view all of their data at the same time
• Can now program sensors by copying through OBD (eliminates need for relearn, see "Programming" in description for details)
• Wireless connection to OBD2 port
• Wireless updates (One Touch Update)
• Larger screen (5.5-inch screen, T2000 is 2.8-inch)
• Updated, larger hardware (32 GB RAM, 5V battery, now offers camera for VIN-reading)
• CAN FD support
• Print TPMS sensor data on PC

More Features:

• Activate 98% OEM/Universal TPMS sensors
• Programs FOXWELL T10 Sensors in 4 Different Ways: Copy by OBD, Copy by Activation, Copy Manually, and Auto Create Sensors
• 3 TPMS Relearning Methods: OBD Relearn, Automatic Relearn, and Stationary Relearn
• Fast Reading Sensor Data: Include sensor ID, tire pressure, temperature, battery, frequency, etc.
• Key Fob Testing Tool: Precisely test 315MHz and 433MHz key fobs to ensure whether it is perfectly running
• Read TPMS Live Data
• Basic Code Reading capabilities using OBDII
• Solid and Rugged Construction: Well-constructed with materials designed to handle harsh work environments
• Intuitive and Easy Instructions: Easy to navigate and operate with clear instructions and detailed user manual
• Free Software Updates for Life
• LIFETIME REPLACEMENT program

Programming:

With this TPMS programming tool, you can program FOXWELL T10 TPMS sensors (T2317833 or T2317834 ) to meet the specifications of a particular vehicle before new sensor installation and relearn. 4 different sensor programming methods are supported by the FOXWELL TS5000 TPMS Service Tool: Copy by Activation; Manual Create; Automatic Create. (Note: TS5000 will only program a replacement sensor if it is a FOXWELL T10 sensor, which can be easily found on our site.)

• Copy by OBD:
  • This method pulls the previously registered sensor ID through the vehicle's TPMS module using OBDII, and will then program the ID to the FOXWELL T10 sensor
  • This eliminates the need for a relearn by combining both steps into one
• Copy by Activation
  • If your original sensor works and can be activated. You could use this method to program a new sensor. It will clone the original ID to the new FOXWELL T10 sensor.
• Copy by Manual Input:
  • If you know the original sensor ID, you can input the ID to program new sensor.
• Auto Create Sensors:
  • If you don't know the original sensor ID or your original sensor was bad, you can choose this method. Install new sensor ID--> program new sensor--> perform TPMS learning and let the car recognize new sensor

Relearning:

The FOXWELL TS5000 TPMS Service Tool can be used as a professional TPMS relearn scanner, to relearn almost all known sensor IDs, which is compatible with 95% of vehicles equipped with TPMS and extremely popular among car repair ships and DIY car owners. To ensure compatibility with different vehicles, 3 types of TPMS sensor relearning are offered:

• OBD Relearn:
  • Usually the most effective relearn tactic, this will allow you to connect the TS5000 to your car wirelessly using the OBDII port and placing your vehicle in a relearn mode.
• Automatic Relearn:
  • For some vehicles, the “Relearn” function can be completed automatically by driving, which makes it quite easy to do a complete set of sensor replacement operations on your own. Be aware that this may require you to drive the vehicle at a certain speed for a designated amount of time for it to relearn.
• Stationary Relearn:
  • TS5000 allows the new TPMS sensor IDs to be transferred without driving a vehicle. You can trigger the sensors when the vehicle is in learn mode by our TPMS Tool TS5000. This will usually require a specific sequence created by the vehicle manufacturer as well, such as pressing the brake a few times, turning the key, etc.

Please note that some vehicles require a combination of these relearning methods, such as needing to drive for a designated amount of time after relearning using OBD. There may also be extra steps your manufacturer uses, so please research your specific vehicle when performing a relearn!

Note:

• Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code. 
  • Pre OBDII vehicles will have limited feature availability
• We recommend purchasing a Bentley Manual to use with your TPMS Tool.
• You will need to register your TPMS tool in order to receive update notice's from Foxwell via E-mail
• Vehicles with 20 pin under hood connector will require T366829  for use 

Support:

For software and hardware support from Foxwell the address is http://www.foxwelltech.com/support/ - Make sure you use the correct address

For after sales issues please contact Nina at [email protected]. Please allow 48 hours for response.

The Schwaben Torx® set contains six drivers, all with center hole, suitable for use on both standard and tamper-proof Torx fasteners

Features:

• Each 3/8-inch driver shank is clearly stamped with the bit size, and has a ribbed circumference for improved grip when turning fasteners by hand
• High strength driver set is tough enough for regular use and includes T15, T20, T30, T40, T45, and T50 sizes
• Conveniently housed in a sturdy blow molded case for portability and easy organization.

Elevate your lifting experience with the Schwaben Long Low Profile - High Lift Floor Jack. Certified for excellence and designed with a keen understanding of European car enthusiasts' needs, this jack is a testament to precision, durability, and performance. Don't compromise on quality—choose the Schwaben advantage for all your lifting endeavors.

Designed with precision, crafted for performance, and backed by our lifetime replacement program, the Schwaben Long Low Profile - High Lift Floor Jack is a must-have tool for every European car aficionado. This jack is engineered to cater to the unique needs of low ground clearance vehicles, ensuring that your prized possessions are lifted with care and precision.

Key Features:

• One Pump Reach: With its innovative one-pump feature, this floor jack effortlessly reaches contact on most cars, streamlining your lifting process.
• Low Profile Advantage: Boasting a mere 2-3/4" low height and a deep-reach lift arm, this jack is tailored for those sports cars and luxury vehicles that ride close to the ground.
• Hydraulic System Protection: The dual pump pistons are expertly shielded to thwart contaminants from compromising the hydraulic system's integrity.
• Built for Durability: Crafted with heavy gauge construction and fortified with rolled edges, this floor jack guarantees unwavering strength and longevity.
• Precise Control: The U-Joint release mechanism offers meticulous control over load descent at any handle position, ensuring the safety of both you and your vehicle.
• Maneuverability Redefined: Upgraded casters allow seamless maneuverability and effortless positioning of the jack, empowering you to find that perfect lifting spot.
• Safety First: The internal by-pass valve prevents over-pumping, shielding the hydraulic system from stress-induced issues.
• Vehicle Protection: A full cover rubber saddle pad and a protective foam cover on the handle are in place to prevent any unintended damage during the lifting process.
• Impressive Capacity: With a remarkable 4000 lb. capacity, this jack is ready to tackle a range of European vehicles.
• LIFETIME REPLACEMENT: Like almost all Schwaben products, this jack is backed by our lifetime replacement program in case anything goes wrong!

Specifications:

• Min Height: 2-3/4"
• Max Height: 24"
• Handle Length: 49-1/4"
• Jack Body Length: 35"
• Length from Pivot Point to Center of Jack Pad: 22"
• Front Casters: 2-1/2" diameter x 2" width
• Saddle Diameter: 4" with full saddle pad
• Weight Capacity: 4000 lbs.
• ANSI / ASME PALD 2009 Certified

Also included are the Schwaben Aluminum 3-Ton Jack Stands. These ultra-light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands show how much pride in workmanship goes into our stands. These stands feature all-aluminum construction with heavy-duty flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to ensure the pin stays in place.  

• Min. Height is 10.6".
• Max Height is 15.4".
• Large 7" diameter base.
• Outer support tube is 2-1/8" in diameter.

For replacement parts, please call us and ask for:

• ES#4430428 - Replacement Screw Set
• ES#4430429 - Replacement Front Wheel
• ES#4430430 - Replacement Caster Wheel

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

The 6 Piece Stubby XZN Triple Square Driver Set features 1/4" square drive drivers designed for impact, ensuring consistent performance across sizes from 4mm to 12mm. Crafted from durable S2 Steel and fully heat-treated, these drivers are robust and prepared for any task at hand.

Their satin chrome plated finish not only prolongs their lifespan but also adds a professional touch to your toolkit. What sets these drivers apart is their compact one-piece design, enhancing ease of handling and storage.

These stubby XZN drivers arrive neatly organized on a 4" Magrail TL Magnetic Socket Organizer, ensuring they're always at your fingertips. Plus, they come with the assurance of our LIFETIME REPLACEMENT program, providing you with confidence in your investment. This set equips you with the perfect XZN sockets, even for those snug spaces.

Includes:

• 4" Magrail TL Magnetic Socket Organizer
• 4 mm
• 5 mm
• 6 mm
• 8 mm
• 10 mm
• 12 mm

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Schwaben Protecta Sockets have color coded mar-free exterior sleeve  that prevent nicks and scratches left by plain metal sockets. Internal spring loaded magnet holds lug nut in place.

Features:

• 17mm, 19mm and 21mm Sockets included in a blow molded case.
• All sockets are 1/2" drive
• 3-3/8" ( 86mm) long

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

This large socket is the perfect tool for axle nuts when servicing the axle shafts or wheel bearings.

Features:

• ½-inch drive 36mm 12-point socket
• Specially hardened to take the added abuse from a impact gun
• Coated for added protection and so you can tell it apart from non impact rated sockets
• 75mm depth  to accommodate many applications and different length shafts
• Made of durable chrome moly steel

The Schwaben 10 Piece 10mm Master Socket Set is a comprehensive socket solution brimming with robust 1/4 inch and 3/8 inch 10mm sockets, all neatly arranged on a single, convenient rail. Meticulously fashioned from premium chrome vanadium steel, this set is thoughtfully curated with your needs in mind, ensuring you always have the most sought-after socket sizes within arm's reach, regardless of their mysterious disappearance into the depths of your garage. And with our unparalleled LIFETIME REPLACEMENT program, rest assured this set will remain your steadfast companion, enduring even the toughest challenges.

Included in the Set:

• Twistable Socket Rail
• 1/4-inch Drive 6 Point Shallow Socket
• 1/4-inch Drive 6 Point Deep Socket
• 1/4-inch Drive 6 Point Impact Shallow Socket
• 1/4-inch Drive 6 Point Impact Deep Socket
• 1/4-inch Drive 6 Point Flex Socket
• 3/8-inch Drive 6 Point Shallow Socket
• 3/8-inch Drive 12 Point Deep Socket
• 3/8-inch Drive 6 Point Impact Shallow Socket
• 3/8-inch Drive 6 Point Impact Deep Socket
• 3/8-inch Drive 6 Point Flex Socket

The Schwaben 26 Piece 1/4" Drive 6 Point Deep and Standard Socket Set comprises more than two dozen 1/4-inch metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces. With a length of 50mm, the deep sockets ensure you can reach critical areas with ease.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 26 Piece 1/4" Drive 6 Point Deep and Standard Socket Set and confidently tackle any task at hand.

Features:

Access Tight Spaces: These deep sockets, measuring 50mm in length, are expertly designed to reach challenging, confined areas, making them perfect for intricate tasks.

Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.

Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.

Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.

High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.

Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.

Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.

Includes:

• 4 mm - deep and standard socket
• 4.5 mm - deep and standard socket
• 5 mm - deep and standard socket
• 5.5 mm - deep and standard socket
• 6 mm - deep and standard socket
• 7 mm - deep and standard socket
• 8 mm - deep and standard socket
• 9 mm - deep and standard socket
• 10 mm - deep and standard socket
• 11 mm - deep and standard socket
• 12 mm - deep and standard socket
• 13 mm - deep and standard socket
• 14 mm - deep and standard socket