BMW Brakes & Brake Parts for BMW 3 Series E90 (2006-2011)

Stainless Brake Rotor Set Screw (34211161806) - Set Of 4

10X Entries Into Our F80 M3 Sweepstakes

T#:348112

Part#: 34211161806KT

In Stock

Sale - Save 25% $ 27.99

This product was last offered at the strikethrough price on
06-13-2026

$ 20.97 USD

Add to Wish List

Qty

Sale - Save 25%

$ 27.99

This product was last offered at the strikethrough price on
06-13-2026

$ 20.97 USD

Add to Wish List

This is a set of stainless steel brake rotor retaining screws to replace the factory steel screws.

Turner Motorsport Brake Bleeder Bottle with Check Valve - Most BMWs ...

10X Entries Into Our F80 M3 Sweepstakes

T#:176959

Part#: BBMCV

In Stock

Sale - Save 10% $ 39.99

This product was last offered at the strikethrough price on
06-13-2026

$ 35.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 39.99

This product was last offered at the strikethrough price on
06-13-2026

$ 35.99 USD

Add to Wish List

The Turner Motorsport Brake Bleeder Bottle with Check Valve is a crucial tool in maintaining your brake system's efficiency. This bottle revolutionizes brake fluid replacement through its dependable characteristics. A necessity for all automotive enthusiasts, this bottle has been engineered to optimize brake bleeding procedures. Its standout attribute is the one-way check valve. With each downward push of the pedal, the valve opens, directing used fluid into the reservoir. As the pedal rebounds, the valve securely shuts, preventing the ingress of air. This facilitates the intake of fresh fluid from the master cylinder. This bottle effortlessly facilitates the recommended bleeding sequence, simplifying the task. Its precision lies in its ability to accurately collect expelled brake fluid, thus facilitating easy monitoring. Moreover, by keeping the master cylinder reservoir consistently filled, you can conveniently replenish fluid levels as necessary. Beyond functionality, this bleeder bottle boasts a design that significantly reduces the likelihood of messy drips and spills. After bleeding each caliper, you can detach the tube from the bleed screw and conveniently 'park' it on the vent/drain port located on the cap. This thoughtful feature maintains the cleanliness of your workspace. The Turner Motorsport Brake Bleeder Bottle with Check Valve stands as an indispensable companion for brake system maintenance. Through its incorporation of the one-way check valve and its purpose-driven design, it streamlines brake fluid upkeep, guaranteeing both the safety and performance of your vehicle. Features: One-way check valve guarantees fluid evacuation with precision while preventing air intake. Effective fluid collection and real-time monitoring throughout the process. 'Park' design for the tube minimizes instances of spills and drips, preserving the tidiness of your workspace.

Show More Show Less

Rear Stainless Steel Brake Lines - Non-M E8X/E9X/F2X/F3X

10X Entries Into Our F80 M3 Sweepstakes

T#:582985

Part#: 022756TMS01

In Stock

Sale - Save 5% $ 100.99

This product was last offered at the strikethrough price on
06-14-2026

$ 95.94 USD

Add to Wish List

Qty

Sale - Save 5%

$ 100.99

This product was last offered at the strikethrough price on
06-14-2026

$ 95.94 USD

Add to Wish List

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Front Stainless Steel Brake Lines -E90 E92 E82 E88 E9x E8x ...

10X Entries Into Our F80 M3 Sweepstakes

T#:582981

Part#: 022756TMS05

In Stock

Sale - Save 10% $ 118.99

This product was last offered at the strikethrough price on
06-14-2026

$ 107.09 USD

Add to Wish List

Qty

Sale - Save 10%

$ 118.99

This product was last offered at the strikethrough price on
06-14-2026

$ 107.09 USD

Add to Wish List

Turner has developed a zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Stainless Brake Rotor Set Screw (34111123072) - Set Of 4

10X Entries Into Our F80 M3 Sweepstakes

T#:387871

Part#: 001359ECS01AX4KT

In Stock

Sale - Save 25% $ 27.99

This product was last offered at the strikethrough price on
06-13-2026

$ 20.97 USD

Add to Wish List

Qty

Sale - Save 25%

$ 27.99

This product was last offered at the strikethrough price on
06-13-2026

$ 20.97 USD

Add to Wish List

This is a set of stainless steel brake rotor retaining screws to replace the factory steel screws.

Turner Front Stainless Steel Brake Lines - E9x M3/ E8x 1M

10X Entries Into Our F80 M3 Sweepstakes

T#:582983

Part#: 022756TMS03

In Stock

Sale - Save 15% $ 118.99

This product was last offered at the strikethrough price on
06-14-2026

$ 101.14 USD

Add to Wish List

Qty

Sale - Save 15%

$ 118.99

This product was last offered at the strikethrough price on
06-14-2026

$ 101.14 USD

Add to Wish List

Turner has developed a new zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Rear Stainless Steel Brake Lines - E82 1M E90 E92 E9x M3 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:582986

Part#: 022756TMS04

In Stock

Sale - Save 10% $ 107.99

This product was last offered at the strikethrough price on
06-14-2026

$ 97.19 USD

Add to Wish List

Qty

Sale - Save 10%

$ 107.99

This product was last offered at the strikethrough price on
06-14-2026

$ 97.19 USD

Add to Wish List

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Mid Stainless Steel Brake Lines - E8x E9x

10X Entries Into Our F80 M3 Sweepstakes

T#:582984

Part#: 022756TMS02

In Stock

Sale - Save 15% $ 118.99

This product was last offered at the strikethrough price on
06-14-2026

$ 101.14 USD

Add to Wish List

Qty

Sale - Save 15%

$ 118.99

This product was last offered at the strikethrough price on
06-14-2026

$ 101.14 USD

Add to Wish List

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Motorsport - Stainless Steel Brake Lines - Complete Kit - E8x ...

10X Entries Into Our F80 M3 Sweepstakes

T#:583485

Part#: 022756TMS10

In Stock

Sale - Save 15% $ 345.99

This product was last offered at the strikethrough price on
06-14-2026

$ 294.07 USD

Add to Wish List

Qty

Sale - Save 15%

$ 345.99

This product was last offered at the strikethrough price on
06-14-2026

$ 294.07 USD

Add to Wish List

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Motorsport Stainless Steel Brake Lines - Complete Kit - E8x/E9...

10X Entries Into Our F80 M3 Sweepstakes

T#:583484

Part#: 022756TMS09

In Stock

Sale - Save 10% $ 338.99

This product was last offered at the strikethrough price on
06-14-2026

$ 305.07 USD

Add to Wish List

Qty

Sale - Save 10%

$ 338.99

This product was last offered at the strikethrough price on
06-14-2026

$ 305.07 USD

Add to Wish List

Turner has developed a superior zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Motorsport Performance Parking Brake Actuator/Expanding Lock -...

10X Entries Into Our F80 M3 Sweepstakes

T#:8933505

Part#: 013313LA01KT

Ships on Nov 3, 2026

Sale - Save 25% $ 208.99

This product was last offered at the strikethrough price on
06-14-2026

$ 156.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 208.99

This product was last offered at the strikethrough price on
06-14-2026

$ 156.74 USD

Add to Wish List

Our Performance Parking Brake Actuator improves the ratio of your actuator from 3:1 to 4:1, which provides better clamp load on the parking brake shoes and increases the longevity of your parking brake system! Plus, if you are into drifty things, this will give you a little better control over your parking brake. Not only does our 4130 Chromoly steel zinc-coated parking brake actuator improve the overall parking brake feel, but it also creates less stress on your parking cables. This is the perfect upgrade for your parking brake system whether you are currently replacing components, or just looking to improve the longevity of your existing system.

Show More Show Less

Brake Bleeder Bottle with Magnet

10X Entries Into Our F80 M3 Sweepstakes

T#:302462

Part#: BBM

In Stock

Sale - Save 5% $ 30.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.44 USD

Add to Wish List

Qty

Sale - Save 5%

$ 30.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.44 USD

Add to Wish List

The Brake Bleeder Bottle with Magnet is an indispensable tool for automotive enthusiasts and professionals seeking a hassle-free and efficient solution for bleeding brake systems. This innovative brake bleeder bottle offers several features that make the brake bleeding process smoother and more convenient than ever before. One of the standout features of this brake bleeder bottle is its "park" feature. This feature is designed to prevent spills and messes during the brake bleeding process. It allows you to secure the hose in a stable position, ensuring that it stays in place and doesn't accidentally tip over or spill brake fluid. This not only saves time but also helps maintain a clean and organized work environment, which is crucial when working on brake systems. The "park" feature is complemented by a magnet that is attached to the bottle. The magnet allows the bottle to easily attach to the car, nearby toolbox, or other metal services so you don't have to worry about the bottle while you bleed your brakes! This ensures that the bottle remains securely in position throughout the brake bleeding process, minimizing the risk of accidents and fluid spills. The Brake Bleeder Bottle with Magnet is not only practical but also durable. It is built to withstand the rigors of automotive maintenance and is compatible with a wide range of brake systems. Its user-friendly design makes it suitable for both beginners and experienced technicians, allowing for efficient and mess-free brake bleeding.

Show More Show Less

Turner Motorsport Front TrackSport Rotor Set - 338x26mm - E9X 325/328...

For vehicles with BMW Performance brake kit featuring 338x26mm rotors

10X Entries Into Our F80 M3 Sweepstakes

T#:600076

Part#: 024398TMS02AKT

In Stock

Sale - Save 3% $ 1,163.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,129.07 USD

Add to Wish List

Qty

Sale - Save 3%

$ 1,163.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,129.07 USD

Add to Wish List

When considering a brake rotor upgrade, it's important to factor in their specific use. On the road, a solid rotor is a simple, yet cheap and effective solution that is perfectly capable of handling daily-driver requirements. When you start taking your BMW to the track, things become a little more complicated. Extended periods of aggressive driving causes the amount of heat in the rotors to build up, and as the temperature of the rotors increase, the metal begins to expand. With solid rotors, this can lead to numerous issues such as warping of the rotors, unexpected cracking along the inner "ring" or friction surfaces, and increased brake fade. This is where Two-Piece Floating rotors start to shine. Two-Piece rotors were designed specifically for high-performance applications and are significantly more resistant to the effects of heat and friction, lessening the negative effects typically seen with standard rotors. The separation of the friction disk and the rotor hat allows for the rotor ring to expand and helps prevent heat from traveling into other sensitive braking components that could be damaged from prolonged exposure to harsh conditions. Needless to say, we aren't a fan of our track days being cut short due to braking issues, so we decided to create our very own performance-oriented TrackSport Rotors! Our TrackSport rotors feature a full floating two-piece design and slotted grooves to allow smooth, consistent braking force and easy expulsion of gases and dust created by the brake pads and rotors under heavy braking. This means that no matter the conditions, you can expect the braking feel to remain consistent, even throughout long periods of abuse. Additionally, thanks to these rotor's inherent two-piece design and the included Aluminum rotor hats, these remove almost 20% of the rotational mass versus stock rotors. Features & Specifications: OE Fitment and Installation Two-Piece Fully Floating Design Heat-treated rotor rings for extended life and reduced wear Factory-applied coating prevents rust and corrosion Lightweight design eliminates excess rotational mass Slotted grooves expel brake dust and gases Internal vanes increase cooling and braking performance

Show More Show Less

Brake Bleeder Bottle with Lanyard

10X Entries Into Our F80 M3 Sweepstakes

T#:302461

Part#: BBL

Ships on Nov 2, 2026

Sale - Save 5% $ 28.99

This product was last offered at the strikethrough price on
06-13-2026

$ 27.54 USD

Add to Wish List

Qty

Sale - Save 5%

$ 28.99

This product was last offered at the strikethrough price on
06-13-2026

$ 27.54 USD

Add to Wish List

The Brake Bleeder Bottle with Lanyard is an indispensable tool for automotive enthusiasts and professionals seeking a hassle-free and efficient solution for bleeding brake systems. This innovative brake bleeder bottle offers several features that make the brake bleeding process smoother and more convenient than ever before. One of the standout features of this brake bleeder bottle is its "park" feature. This feature is designed to prevent spills and messes during the brake bleeding process. It allows you to secure the hose in a stable position, ensuring that it stays in place and doesn't accidentally tip over or spill brake fluid. This not only saves time but also helps maintain a clean and organized work environment, which is crucial when working on brake systems. The "park" feature is complemented by a metal lanyard that comes with the bottle. This metal lanyard serves as an additional means of keeping the bottle stable and in one place. You can attach the lanyard to a fixed point in your workspace, such as a vehicle frame or a nearby hook, and then secure the bottle to it. This ensures that the bottle remains securely in position throughout the brake bleeding process, minimizing the risk of accidents and fluid spills. The Brake Bleeder Bottle with Lanyard is not only practical but also durable. It is built to withstand the rigors of automotive maintenance and is compatible with a wide range of brake systems. Its user-friendly design makes it suitable for both beginners and experienced technicians, allowing for efficient and mess-free brake bleeding.

Show More Show Less

Turner Motorsport Brake Bleeder Bottle

10X Entries Into Our F80 M3 Sweepstakes

T#:338572

Part#: TMS1196

Ships on Nov 2, 2026

Sale - Save 5% $ 28.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 27.54 USD

Add to Wish List

Sale - Save 5%

$ 28.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 27.54 USD

Add to Wish List

The Turner Motorsport Brake Bleeder Bottle is the perfect companion when bleeding your brakes! The bottle features a nice long flexible hose so fitment over the bleeder nipple is a snap. These bottles also offer either a magnetic mount or a cable lanyard, so you can hang the bottle or stick it to the brake rotor, this leaves your hands-free to work with your tools. It works great with our Power Brake Bleeder

Show More Show Less

Turner Motorsport Stainless Steel Brake Lines - Complete Kit - E9x Xi...

10X Entries Into Our F80 M3 Sweepstakes

T#:583875

Part#: 022757TMS09

In Stock

Sale - Save 10% $ 332.99

This product was last offered at the strikethrough price on
06-14-2026

$ 299.67 USD

Add to Wish List

Qty

Sale - Save 10%

$ 332.99

This product was last offered at the strikethrough price on
06-14-2026

$ 299.67 USD

Add to Wish List

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Motorsport Rear TrackSport Rotor Set - 336x22mm - E84 35ix, E9...

10X Entries Into Our F80 M3 Sweepstakes

T#:600079

Part#: 024398TMS03AKT

In Stock

Sale - Save 3% $ 1,129.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,096.09 USD

Add to Wish List

Qty

Sale - Save 3%

$ 1,129.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,096.09 USD

Add to Wish List

When considering a brake rotor upgrade, it's important to factor in their specific use. On the road, a solid rotor is a simple, yet cheap and effective solution that is perfectly capable of handling daily-driver requirements. When you start taking your BMW to the track, things become a little more complicated. Extended periods of aggressive driving causes the amount of heat in the rotors to build up, and as the temperature of the rotors increase, the metal begins to expand. With solid rotors, this can lead to numerous issues such as warping of the rotors, unexpected cracking along the inner "ring" or friction surfaces, and increased brake fade. This is where Two-Piece Floating rotors start to shine. Two-Piece rotors were designed specifically for high-performance applications and are significantly more resistant to the effects of heat and friction, lessening the negative effects typically seen with standard rotors. The separation of the friction disk and the rotor hat allows for the rotor ring to expand and helps prevent heat from traveling into other sensitive braking components that could be damaged from prolonged exposure to harsh conditions. Needless to say, we aren't a fan of our track days being cut short due to braking issues, so we decided to create our very own performance-oriented TrackSport Rotors! Our TrackSport rotors feature a full floating two-piece design and slotted grooves to allow smooth, consistent braking force and easy expulsion of gases and dust created by the brake pads and rotors under heavy braking. This means that no matter the conditions, you can expect the braking feel to remain consistent, even throughout long periods of abuse. Additionally, thanks to these rotor's inherent two-piece design and the included Aluminum rotor hats, these remove almost 20% of the rotational mass versus stock rotors. Features & Specifications: OE Fitment and Installation Two-Piece Fully Floating Design Heat-treated rotor rings for extended life and reduced wear Factory-applied coating prevents rust and corrosion Lightweight design eliminates excess rotational mass Slotted grooves expel brake dust and gases Internal vanes increase cooling and braking performance

Show More Show Less

Turner Front Stainless Steel Brake Lines - E90 E92 E9x

10X Entries Into Our F80 M3 Sweepstakes

T#:582980

Part#: 022757TMS01

In Stock

Sale - Save 5% $ 112.99

This product was last offered at the strikethrough price on
06-14-2026

$ 107.34 USD

Add to Wish List

Qty

Sale - Save 5%

$ 112.99

This product was last offered at the strikethrough price on
06-14-2026

$ 107.34 USD

Add to Wish List

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner Stainless brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Motorsport Front TrackSport Rotor Set - 348x30mm - E9X 335i/i ...

10X Entries Into Our F80 M3 Sweepstakes

T#:600073

Part#: 024398TMS01AKT

In Stock

Sale - Save 8% $ 1,306.03

This product was last offered at the strikethrough price on
05-03-2026

$ 1,199.69 USD

Add to Wish List

Qty

Sale - Save 8%

$ 1,306.03

This product was last offered at the strikethrough price on
05-03-2026

$ 1,199.69 USD

Add to Wish List

When considering a brake rotor upgrade, it's important to factor in their specific use. On the road, a solid rotor is a simple, yet cheap and effective solution that is perfectly capable of handling daily-driver requirements. When you start taking your BMW to the track, things become a little more complicated. Extended periods of aggressive driving causes the amount of heat in the rotors to build up, and as the temperature of the rotors increase, the metal begins to expand. With solid rotors, this can lead to numerous issues such as warping of the rotors, unexpected cracking along the inner "ring" or friction surfaces, and increased brake fade. This is where Two-Piece Floating rotors start to shine. Two-Piece rotors were designed specifically for high-performance applications and are significantly more resistant to the effects of heat and friction, lessening the negative effects typically seen with standard rotors. The separation of the friction disk and the rotor hat allows for the rotor ring to expand and helps prevent heat from traveling into other sensitive braking components that could be damaged from prolonged exposure to harsh conditions. Needless to say, we aren't a fan of our track days being cut short due to braking issues, so we decided to create our very own performance-oriented TrackSport Rotors! Our TrackSport rotors feature a full floating two-piece design and slotted grooves to allow smooth, consistent braking force and easy expulsion of gases and dust created by the brake pads and rotors under heavy braking. This means that no matter the conditions, you can expect the braking feel to remain consistent, even throughout long periods of abuse. Additionally, thanks to these rotor's inherent two-piece design and the included Aluminum rotor hats, these remove almost 20% of the rotational mass versus stock rotors. Features & Specifications: OE Fitment and Installation Two-Piece Fully Floating Design Heat-treated rotor rings for extended life and reduced wear Factory-applied coating prevents rust and corrosion Lightweight design eliminates excess rotational mass Slotted grooves expel brake dust and gases Internal vanes increase cooling and braking performance

Show More Show Less

Turner Motorsport Front TrackSport Rotor Set - 360x30mm - E9X M3, E82...

10X Entries Into Our F80 M3 Sweepstakes

T#:600081

Part#: 025518TMS01AKT

Ships on Jan 22, 2027

Sale - Save 3% $ 1,319.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,280.39 USD

Add to Wish List

Qty

Sale - Save 3%

$ 1,319.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,280.39 USD

Add to Wish List

When considering a brake rotor upgrade, it's important to factor in their specific use. On the road, a solid rotor is a simple, yet cheap and effective solution that is perfectly capable of handling daily-driver requirements. When you start taking your BMW to the track, things become a little more complicated. Extended periods of aggressive driving causes the amount of heat in the rotors to build up, and as the temperature of the rotors increase, the metal begins to expand. With solid rotors, this can lead to numerous issues such as warping of the rotors, unexpected cracking along the inner "ring" or friction surfaces, and increased brake fade. This is where Two-Piece Floating rotors start to shine. Two-Piece rotors were designed specifically for high-performance applications and are significantly more resistant to the effects of heat and friction, lessening the negative effects typically seen with standard rotors. The separation of the friction disk and the rotor hat allows for the rotor ring to expand and helps prevent heat from traveling into other sensitive braking components that could be damaged from prolonged exposure to harsh conditions. Needless to say, we aren't a fan of our track days being cut short due to braking issues, so we decided to create our very own performance-oriented TrackSport Rotors! Our TrackSport rotors feature a full floating two-piece design and slotted grooves to allow smooth, consistent braking force and easy expulsion of gases and dust created by the brake pads and rotors under heavy braking. This means that no matter the conditions, you can expect the braking feel to remain consistent, even throughout long periods of abuse. Features & Specifications: OE Fitment and Installation Two-Piece Fully Floating Design Heat-treated rotor rings for extended life and reduced wear Factory-applied coating prevents rust and corrosion Lightweight design eliminates excess rotational mass Slotted grooves expel brake dust and gases Internal vanes increase cooling and braking performance

Show More Show Less

Turner Motorsport Direct-Fit Hydro E-Brake Kit - E9X

10X Entries Into Our F80 M3 Sweepstakes

T#:54033237

Part#: 057047LAKT

In Stock

$ 560.99

This product was last offered at the strikethrough price on
09-16-2026

$ 499.99 USD

Add to Wish List

Qty

$ 499.99 USD

Add to Wish List

Engineered for relentless track abuse, the Turner Motorsport Hydraulic E-Brake Mount delivers direct, uncompromising rear-wheel lockup for the E9X chassis. Forget flimsy universal brackets and custom fab work, this is a purpose-built, high-precision bolt-in assembly developed in-house using advanced 3D chassis scanning and CAD modeling to guarantee exact fitment and maximum leverage.

Constructed around a rigid 11-gauge steel base plate, this mount eliminates structural deflection under heavy loading, ensuring consistent hydraulic pressure when initiation matters most. The heart of the system relies on a 6061 billet aluminum bell-crank pivot paired with Teflon-lined spherical rod ends, delivering instant, slop-free actuation. By orienting the master cylinder longitudinally alongside the shifter, line plumbing and cylinder maintenance remain completely accessible, all while requiring only minimal trimming to the factory console. Built lightweight, durable, and track-ready, it’s the definitive performance upgrade for drivers demanding total chassis control.

Show More Show Less

OEM Rear Brake Pads - E60, E63, E65, E70, E71, E9x M3

T#:15889

Part#: 34212284296

Ships in 2 Business Days

$ 77.99 USD

Add to Wish List

Qty

$ 77.99 USD

Add to Wish List

These are the rear brake pads for the E60 M5, E63 M6, and E90 E92 E92 M3 models. BMW used several different suppliers for their brake pads and we buy direct from their distributors to get you the same pad as originally equipped but at a fraction of the cost of the local BMW dealer. . These are the same pads as what originally came on your car but without the expensive BMW logo. Replaces BMW part #34216768471.

Price is for one set - enough to replace the pads on both rear calipers.

These rear pads fit the following BMWs:
2006-2011 E90 BMW M3 - Sedan
2007-2013 E92 BMW M3 - Coupe
2007-2013 E93 BMW M3 - Convertible
2004-2010 E60 BMW 545i 550i M5
2004-2011 E63 E64 BMW 645ci 650iM6
2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
2007-2013 E70 BMW X5 4.8i X5 xDrive48i
2008-10/2008 E71 BMW X6 xDrive35i
2008+ E71 BMW X6 xDrive50i

Show More Show Less

OEM Pagid Front Brake Pads - E9x M3, E82 1M Coupe

T#:15841

Part#: 34112283865

In Stock at Vendor

$ 88.99

This product was last offered at the strikethrough price on
07-23-2026

$ 86.99 USD

Add to Wish List

Qty

$ 86.99 USD

Add to Wish List

These brake pads are made by OEM supplier Pagid and offer a great combination of performance, longevity and smooth quiet operation. These are the OEM front brake pads to fit the front (see full application list below). BMW used several different suppliers for their brake pads and we buy direct from their distributors to get you the same pad as originally equipped but at a fraction of the cost of the local BMW dealer. OEM brands include Pagid, Textar, Jurid, Ate, and others. These are the same pads as what originally came on your car but without the expensive BMW logo.

This item fits the following BMWs:
2011 E82 BMW 1M Coupe
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
2004-2005 E60 BMW 525i automatic
2006-2010 E60 BMW 525xi 530xi
2007-2010 E60 BMW 528i 528xi 528i xDrive
2007-2010 E60 BMW 535i 535xi 535i xDrive
2004-2010 E60 BMW 545i 550i

Show More Show Less

Parking Brake Shoe Set - E46 325xi, 330i/ci/xi, E39, E9X, E82, F30, F...

T#:372625

Part#: 34416761292

In Stock

$ 50.99 USD

Add to Wish List

Qty

$ 50.99 USD

Add to Wish List

These Parking Brake Shoes include the set of 4 shoes to replace both the left and right rear parking brake shoes.

OEM Pagid Rear Brake Pads - E9x 325i/xi, 328i/xi, 06-09, E82 128i 08-...

T#:19687

Part#: 34216774692

Ships in 2 Business Days

$ 52.99

This product was last offered at the strikethrough price on
05-07-2026

$ 50.99 USD

Add to Wish List

Qty

$ 50.99 USD

Add to Wish List

These are the OEM rear brake pads to fit the rear of the E9x 325i/xi, 328i/xi and E82 128i. BMW used several different suppliers for their brake pads and we buy direct from their distributors to get you the same pad as originally equipped but at a fraction of the cost of the local BMW dealer. OEM brands include Pagid, Textar, Jurid, Ate, and others. These are the same pads as what originally came on your car but without the expensive BMW logo.

This item fits the following BMWs:
2008-2010 E82 BMW 128i
2006-2009 E90 BMW 325i 325xi 328i 328xi 328i xDrive - Sedan
2006-2009 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2009 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2009 E93 BMW 328i - Convertible

Show More Show Less

OEM Pagid Front And Rear Brake Pad Set - E9X M3, 1 M Coupe

T#:552752

Part#: 34112283865KT2

Ships in 2 Business Days

$ 164.99 USD

Add to Wish List

Qty

$ 164.99 USD

Add to Wish List

These are the OEM brake pads to fit the specific BMWs listed below. BMW used several different suppliers for their brake pads and we buy direct from their distributors to get you the same pad as originally equipped but at a fraction of the cost of the local BMW dealer. OEM brands include Pagid, Textar, Jurid, Ate, and others. These are the same pads as what originally came on your car but without the expensive BMW logo.

This set includes pads for both the front and rear brakes.

This item fits the following BMWs:
2008-2013 E9X BMW M3
2008-2013 E82 BMW 1 M Coupe

Show More Show Less

HELLA PAGID Brake Pads - Front

For vehicles equipped with 6-piston BMW Performance brake calipers only.

T#:579537

Part#: 34116786044

Ships in 2 Business Days

$ 80.99

This product was last offered at the strikethrough price on
05-07-2026

$ 78.99 USD

Add to Wish List

Qty

$ 78.99 USD

Add to Wish List

Front Brake Rotors - E90 330i & 330xi 2006 (Pair)

T#:350966

Part#: 34116764645KT

Ships in 2 Business Days

$ 281.99

This product was last offered at the strikethrough price on
05-07-2026

$ 241.99 USD

Add to Wish List

Qty

$ 241.99 USD

Add to Wish List

This is a pair (2) front brake rotors/discs for the 2006 330i & 330xi. This set includes one front left brake rotor, and one front right brake rotor in a convenient package. Direct replacement for BMW # 34116854999.

These front brake discs / rotors fit:
2006-2006 E90 3 Series 330i & 330xi sedan

Show More Show Less

OEM Pagid Front Brake Pad Set - E9X E60 Z4

T#:15852

Part#: 34116763618

Ships in 2 Business Days

$ 67.40 USD

Add to Wish List

Qty

$ 67.40 USD

Add to Wish List

These are the OEM brake pads to fit the specific BMWs listed below. BMW used several different suppliers for their brake pads and we buy direct from their distributors to get you the same pad as originally equipped but at a fraction of the cost of the local BMW dealer. OEM brands include Pagid, Textar, Jurid, Ate, and others. These are the same pads as what originally came on your car but without the expensive BMW logo.

This item fits the following BMWs:
E9X BMW 325i/xi 328i/xi 330i/xi
E60/61 BMW 525i
E89 BMW Z4 sDrive30i/35i

Show More Show Less

Front Brake Rotors - E9X 328i 328xi, F22 228i, F3X 320i/328/328ix (Pa...

T#:350971

Part#: 34116774875P

Ships in 2 Business Days

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

Replacement front brake rotors (312x24) for E9X 328i/328xi, F22 228i, and F3X 320i/328i/328i xDrive. These are direct replacement rotors manufactured by Pagid and include a corrosion-resistant coating over the entire surface and even internal to the rotor.

F22/F3X Fitment Note: not for M Sport brake packages.

Price is for the pair.

Show More Show Less

Parking Brake Shoe Set - E46 323i, 325i 328i, E85 Z4, F30

T#:12192

Part#: 34416761291

In Stock

$ 46.99 USD

Add to Wish List

Qty

$ 46.99 USD

Add to Wish List

These Parking Brake Shoes for E46 3 series and E85 Z4 include the set of 4 shoes to replace both the left and right rear parking brake shoes. These are also referred to as the hand brake or emergency brake shoes.

This item fits the following BMWs:
2008-2013 E82 BMW 128i
2014+ F22 BMW 228i 228i xDrive M235i M235i xDrive
2014+ F23 BMW 228i 228i xDrive M235i
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci
2006-2011 E90 BMW 325i 328i - Sedan
2007-2013 E92 BMW 328i Coupe
2012-2014 F30 BMW 328i Sedan
2012+ F30 BMW 320i 328d - Sedan
2013+ F32 BMW 428i Coupe
2013+ F33 BMW 428i Convertible - N20 engine only
2014+ F36 BMW 428i Gran Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si

Show More Show Less

Front Brake Rotors - E9X 335i/Xi (Pair)

T#:350968

Part#: 34116770729KT

Ships in 2 Business Days

$ 401.99 USD

Add to Wish List

Qty

$ 401.99 USD

Add to Wish List

This is a pair (2) of front brake rotors/discs (348x30mm) for the 2007 and later 335i sedan, coupe, and cabrio models. Includes one front left and one front right brake rotor, so the price is for the pair.

These are direct replacement rotors from some of the best names in the business and at substantial savings from buying direct from the BMW dealer.

This item fits the following BMWs:
2007-2011 E90 BMW 335d 335i 335xi 335i xDrive - Sedan
2007-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 335i - Convertible

Show More Show Less

Rear Brake Rotors - E9X 325Xi/328Xi 2006-later

T#:351003

Part#: 34216764653KT

In Stock

$ 180.08

This product was last offered at the strikethrough price on
05-07-2026

$ 119.98 USD

Add to Wish List

Qty

$ 119.98 USD

Add to Wish List

This is a pair (2) of rear brake rotors/discs (300x20mm) for the 2006+ E90 325Xi, 2007+ E90 328Xi, 2007+ E91 328i/328Xi, E92 328Xi, E93 328i. Includes one rear left and one rear right brake rotor, so the price is for the pair. Alternate part number 34216864901.

These rear brake discs / brake rotors fit:
2006 E90 325Xi sedan
2007-later E90 328Xi, 328i xDrive sedan
2006 E91 325Xi wagon
2007-later E91 328i, 328Xi, 328i xDrive wagon
2007-later E92 328Xi coupe
2007-later E93 328i cabrio

Show More Show Less

Pagid Brake Pad Set - Rear - E90, E92, E93

T#:369137

Part#: 34216775678

Special Order: No Guaranteed ETA

$ 75.03 USD

Add to Wish List

Qty

$ 75.03 USD

Add to Wish List

A OEM replacement compound

OEM Front Brake Pads - E82, E9X, E89

For vehicles with production date up to 09/2007

T#:15878

Part#: 34116799166

Special Order: No Guaranteed ETA

$ 52.99 USD

Add to Wish List

Qty

$ 52.99 USD

Add to Wish List

These are the OEM front brake pads to fit the front of the specific BMWs listed below. BMW used several different suppliers for their brake pads and we buy direct from their distributors to get you the same pad as originally equipped but at a fraction of the cost of the local BMW dealer. OEM brands include Pagid, Textar, Jurid, Ate, and others. These are the same pads as what originally came on your car but without the expensive BMW logo.

This item fits the following BMWs:
2008+ E82 BMW 128i
2006-2007 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2007 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007 E92 BMW 328i 328xi 328i xDrive - Coupe
2007 E93 BMW 328i - Convertible
2009+ E89 BMW Z4 sDrive30i Z4 sDrive35i

Show More Show Less

AP Racing By Essex Radi-CAL ENP Competition Brake Kit (Front 9668/372...

T#:57086655

Part#: 13.01.10038

Ships in 10 Business Days

$ 6,687.99

This product was last offered at the strikethrough price on
08-26-2026

$ 6,199.00 USD

Add to Wish List

Qty

$ 6,199.00 USD

Add to Wish List

Electroless Nickel Plated Front Competition Brake Kit

AP Racing By Essex Radi-CAL ENP Competition Brake Kit (Rear 9449/340m...

T#:57086656

Part#: 13.01.10053

Ships in 10 Business Days

$ 5,447.99

This product was last offered at the strikethrough price on
08-26-2026

$ 5,049.00 USD

Add to Wish List

Qty

$ 5,049.00 USD

Add to Wish List

Electroless Nickel Plated Rear Competition Brake Kit

American Grease Stick Universal 12" Brake Line

T#:367235

Part#: B312

Ships in 3 Business Days

$ 3.05 USD

Add to Wish List

Qty

$ 3.05 USD

Add to Wish List

Universal European brake line with European bubble flare on both ends with European thread nuts

American Grease Stick Universal 60" Brake Line

T#:367247

Part#: B360

In Stock

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

Universal European brake line with European bubble flare on both ends with European thread nuts

American Grease Stick Universal 51" Brake Line

T#:367244

Part#: B351

Ships in 1 day

$ 5.99 USD

Add to Wish List

Qty

$ 5.99 USD

Add to Wish List

Universal European brake line with European bubble flare on both ends with European thread nuts

American Grease Stick Universal 30" Brake Line

T#:367237

Part#: B330

Ships in 1 day

$ 5.99 USD

Add to Wish List

Qty

$ 5.99 USD

Add to Wish List

Universal European brake line with European bubble flare on both ends with European thread nuts

American Grease Stick Universal 40" Brake Line

T#:367238

Part#: B340

Ships in 3 Business Days

$ 5.99 USD

Add to Wish List

Qty

$ 5.99 USD

Add to Wish List

Universal European brake line with European bubble flare on both ends with European thread nuts

American Grease Stick Universal 20" Brake Line

T#:367236

Part#: B320

Ships in 3 Business Days

$ 5.99 USD

Add to Wish List

Qty

$ 5.99 USD

Add to Wish List

Universal European brake line with European bubble flare on both ends with European thread nuts

American Grease Stick Universal 8" Brake Line

T#:367234

Part#: B308

Ships in 3 Business Days

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

Universal European brake line with European bubble flare on both ends with European thread nuts

OEM Pagid Rear Brake Pads - E9X 330i/xi, 335i/xi

T#:12290

Part#: 34216791938

Special Order: No Guaranteed ETA

$ 40.99 USD

Add to Wish List

Qty

$ 40.99 USD

Add to Wish List

These are the OEM Pagid rear brake pads to fit the rear of the specific BMWs listed below. BMW used several different suppliers for their brake pads and we buy direct from their distributors to get you the same pad as originally equipped but at a fraction of the cost of the local BMW dealer. OEM brands include Pagid, Textar, Jurid, Ate, and others. These are the same pads as what originally came on your car but without the expensive BMW logo.

This item fits the following BMWs:
2006-2011 E90 BMW 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2007-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 335i - Convertible

Show More Show Less