Packaged by Turner BMW Engine Parts for BMW 3 Series E90 (2006-2011)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

E9X 335i/xi N54 Stage 2+ Turner Power Package
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:339942
Part#: TMS224337
Back Ordered
Starting at $ 2,630.84 USD
Starting at $ 2,630.84 USD

2007-2010 E90/E92/E93 335i N54 Stage 2+ Power Package (for race-use only)
Peak Power Gain*: up to 125hp / 158ft-lbs
+ aFe Pro5R Dual Cone Intake
+ CP-E Catless Downpipes
+ Wagner Front Mount Intercooler
+ Cobb AccessPort programmer

For a 335i race or competition car, the exhaust is an important area for upgrades. Removing the catalytic converters eliminates a choke point in the exhaust system and will free up power and torque. It also eliminates the cats as a potential failure point - a broken up cat can clog the exhaust and severly damage your motor. These cat-less DP from CP-E are some of the best we have seen. They are made from 304 stainless steel mandrel-bent piping. The flow characteristics of the piping was especially important to maximize the efficiency of the turbos. With less restriction the turbos work more efficiently and last longer.

In this package we also address the shortcomings in the factory intercooler setup. With higher boost comes more heat in the intake air and the factory intercooler does a poor job of cooling that air before it enters the engine. In the Stage 2+ package we offer multiple intercooler upgrades in increasing levels of capacity - Wagner Evo I or Wagner Evo II FMIC. Each is a significant upgrade over the stock 335i FMIC. The Wagner Evo I is our standard FMIC upgrade and fits with the stock piping and requires no modification for fitment. The Wagner Evo II has greater cooling capacity and silicone piping to the stock intake. Some minor modification to plastic trim pieces is required for installation. 

The aFe Dual Cone intake and Cobb Accessport programmer complete the Stage 2+ package. The larger surface area of the aFe cone filters allows more air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with aFe Pro5R filters, mounting shield, intake tubes, sealing materials, hardware, and install instructions. The torque increase and sound from the open intake from low-mid RPM is sensational.

The Cobb software tool puts multiple tuning stages in the palm of your hand. Our Stage 2+ package lines up with the Cobb Stage 2+ tuning maps for an intake and DP (91 or 93+ octane fuel). Simply download the Stage 2+ race map from the Cobb website, plug it in, and install. Select different maps for other upgrades, throttle settings, octane ratings, valet mode, or revert back to stock! If you're moving among Stages simply download a new file from the Cobb website and update your AccessPort programmer! The AccessPort triples as a diagnostic tester/reader and a data logger. It's the most feature-packed programmer on the market today.

* Note that peak power gains are quoted remain the same as Stage 2 but the cooler intake air means there is less of a chance the engine computer will cut power from heatsoak. Adding a full exhaust (from the DP) will make this a Stage 3 kit in the Cobb tuning catalog.

 

This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and either e-mailed or faxed to Turner Motorsport before shipping. You can download the waiver here.


This item fits the following BMWs:
2007-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is* 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i - Convertible
* 335is horsepower gains are lower due to the factory power boost in the "is" package

Show More Show Less
Radium Fuel Hanger Surge Tank Complete Kit - For Walbro Pumps ...
10X Entries Into Our F80 M3 Sweepstakes
Upgrade Your Low-Pressure Fueling System With this All-Inclusive Kit!
Packaged by Turner - Corporate Logo
T#:25606665
Part#: N5XFUEL
Ships on Oct 13, 2026
Sale - Save 1% $ 1,254.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,241.80 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 1,254.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,241.80 USD
Free Shipping on orders $49 and up
Introducing the comprehensive N54/N55 Low-Pressure Fueling Solution! With Radium Engineering's Regulated Fuel Hanger Surge Tank at its core, this kit allows you to tailor your fuel pump setup, select an in-line fuel filter, and opt for a wiring kit for multiple LPFP configurations in your N54 or N55-powered E9X 335i. In this setup, the BMW fuel pump serves as a "lift" pump, maintaining fuel volume in the Fuel Hanger Surge Tank via a dedicated orifice. This guarantees sufficient pressure for the venturi jet pump(s) to operate, ensuring consistent fuel delivery. Excess fuel in the FHST cycles back to the OEM tank through a one-way check valve ensuring a steady fuel supply. Unlike conventional surge tanks, which rely on pump flow matching, this FHST employs additional mechanisms to continuously deliver fuel regardless of fluctuations in other fuel sources. When the main tank nears depletion, the lift pump and Fuel Pressure Regulator step in to supply fuel to the FHST. Furthermore, with a boost reference signal (Hobbs Switch), the Fuel Pressure Regulator operates at a 1:1 ratio, allowing fuel pressure to rise proportionally with boost pressure. The low-pressure fuel returning from the Fuel Pressure Regulator is routed back into the surge tank to maintain its fullness. Inside the canister, a 6-hole diverter ensures even fuel dispersion without air bubbles or foaming. The stainless electrical studs included effectively handle high current demands, surpassing the capabilities of compact bulkhead connectors. These resilient connections are sealed against all standard and exotic fuels, with non-conductive acorn nuts provided to prevent accidental short circuits. The kit also includes the necessary electrical hardware for one Walbro fuel pump and the OEM level sender, while the in-tank wiring is insulated with premium chemically resistant ETFE for enhanced durability. If you are planning on running more than one LPFP, you will need to select the Hobbs Switch option for boost reference (to be installed on the manifold or charge pipe), as well as the fuel pump wiring kit! Features: -Drop-In OEM Replacement -Permits 1 or 2 Surge Pumps -1:1 Fuel Pressure Adjustments -Fuel Starvation Protection -Integrated 1-Way Fill Valve -High Current Electrical Hardware -Compatible with Various Pumps -Anodized Aluminum Construction -Gasoline and Ethanol Compliant -Anodized Aluminum 8AN Male Outlet Fitting -Anodized Aluminum Surge Tank Canister -Fuel Resistant Tubing and Wiring -Stainless Steel Hardware -Relay(s) and Fuse(s)
Show More Show Less
Turbos and Turbocharger Installation Kit - N54
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:55317702
Part#: 13712247398KT5
Ships on Oct 27, 2026
New Item
$ 1,869.81

This product was last offered at the strikethrough price on
09-10-2026

$ 1,869.33 USD
Free Shipping on orders $49 and up
$ 1,869.33 USD
Free Shipping on orders $49 and up
Are your factory N54 turbos plagued by the dreaded wastegate rattle, or worse, starting to blow smoke? Don't just replace them—upgrade your ultimate driving machine with the ultimate DIY refresh kit.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:27672136
Part#: 11238511371TKT8
Ships on Feb 26, 2027
Sale - Save 1% $ 561.99

This product was last offered at the strikethrough price on
05-03-2026

$ 556.40 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 561.99

This product was last offered at the strikethrough price on
05-03-2026

$ 556.40 USD
Free Shipping on orders $49 and up
The vibration damper in the 335d is a common failure item and can fail at as low as 60 thousand miles leaving you stranded. This kit includes everything needed to replace your vibration damper and service your drive belt system! Vibration Dampers (also called Harmonic Dampers or Harmonic Balancers) absorb and remove unwanted vibrations due to torsional twisting of the crankshaft. During cylinder combustions, the crank quickly flexes ever so slightly, resulting in resonance vibrations. These vibrations could lead to damage of the crankshaft or crank bearings over time if not accounted for. The vibration damper helps to eliminate these vibrations, thereby extending the life of your engine's mechanical components and preventing damage. If your vibration damper has failed, you will likely notice excess engine vibrations or shaking that will gradually get worse, especially around certain RPMs where the vibration resonance is most pronounced. This basic kit includes the components necessary to replace your damper with an OEM damper from Corteco, including two belts and the Corteco Vibration Damper pulley. Also included in this kit is a brand-new line of specialty tools from Schwaben designed specifically for this replacement! You will get a Crankshaft Pulley Turner Tool, Stretch Belt Remover/Installer, T50 Alternator Wrench, and a 15/16" Pass-Through Socket, all included to make swapping out your old damper a quick and easy process! Standard tools you might need but are not included: 8mm Drill Bit (to use as flywheel locking pin) 32mm Fan Clutch Wrench - You may want a second 32mm to hold the coupler in place 24mm Box Wrench - For releasing tensioner Torque Wrench - To torque new crankshaft bolts Breaker Bar - to drive the crankshaft bolts further
Show More Show Less

OEM Accessory Belt Service Kit - E90 335d
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:554452
Part#: 335DACCKT
Ships on Jan 26, 2027
Sale - Save 2% $ 232.99

This product was last offered at the strikethrough price on
08-26-2026

$ 229.22 USD
Free Shipping
Sale - Save 2%
$ 232.99

This product was last offered at the strikethrough price on
08-26-2026

$ 229.22 USD
Free Shipping
Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need to be replaced such as the belts, tensioners, and hardware.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:27672135
Part#: 11238511371TKT7
Ships on Feb 26, 2027
Sale - Save 1% $ 751.99

This product was last offered at the strikethrough price on
08-26-2026

$ 745.52 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 751.99

This product was last offered at the strikethrough price on
08-26-2026

$ 745.52 USD
Free Shipping on orders $49 and up
The vibration damper in the 335d is a common failure item and can fail at as low as 60 thousand miles leaving you stranded. This kit includes everything needed to replace your vibration damper and service your drive belt system! Vibration Dampers (also called Harmonic Dampers or Harmonic Balancers) absorb and remove unwanted vibrations due to torsional twisting of the crankshaft. During cylinder combustions, the crank quickly flexes ever so slightly, resulting in resonance vibrations. These vibrations could lead to damage of the crankshaft or crank bearings over time if not accounted for. The vibration damper helps to eliminate these vibrations, thereby extending the life of your engine's mechanical components and preventing damage. If your vibration damper has failed, you will likely notice excess engine vibrations or shaking that will gradually get worse, especially around certain RPMs where the vibration resonance is most pronounced. This kit includes all of the components necessary to replace your damper with an OEM damper from Corteco, including belts, pulleys, hardware, and more. Also included in this kit is a brand-new line of specialty tools from Schwaben designed specifically for this replacement! You will get a Crankshaft Pulley Turner Tool, Stretch Belt Remover/Installer, T50 Alternator Wrench, and a 15/16" Pass-Through Socket, all included to make swapping out your old damper a quick and easy process! Standard tools you might need but are not included: 8mm Drill Bit (to use as flywheel locking pin) 32mm Fan Clutch Wrench - You may want a second 32mm to hold the coupler in place 24mm Box Wrench - For releasing tensioner Torque Wrench - To torque new crankshaft bolts Breaker Bar - to drive the crankshaft bolts further
Show More Show Less

Low-Temperature N54 Oil Thermostat Overhaul Kit
10X Entries Into Our F80 M3 Sweepstakes
For 2008+ models only
Packaged by Turner - Corporate Logo
T#:26705034
Part#: 090743ECS09KT2
Back Ordered
Sale - Save 9% $ 249.99

This product was last offered at the strikethrough price on
05-03-2026

$ 226.76 USD
Free Shipping on orders $49 and up
Sale - Save 9%
$ 249.99

This product was last offered at the strikethrough price on
05-03-2026

$ 226.76 USD
Free Shipping on orders $49 and up

Ensure optimal performance and longevity for your BMW N54 engine with this comprehensive upgrade kit assembled by enthusiasts at Turner Motorsport!

High-performance low-temp oil thermostat for superior cooling efficiency Anodized aluminum oil thermostat shaft ensures durability and surface protection Premium quality thermostat spring and bung for reliable operation Anodized thermostat cover with external fins maximizes cooling effectiveness Complete installation kit includes gasket and hardware for hassle-free setup Includes Liqui Moly Special-Tec LL 5W-30 oil, new oil filter, filter housing gasket, and drain plug for a complete service Elevate your N54's cooling system and maintain optimal oil temperatures between 194F and 230F with this all-inclusive upgrade kit.

Show More Show Less
Low-Temperature N54 Oil Thermostat Overhaul Kit
10X Entries Into Our F80 M3 Sweepstakes
For 2006-2007 models only
Packaged by Turner - Corporate Logo
T#:26705005
Part#: 090766ECS09KT2
Back Ordered
Sale - Save 9% $ 245.99

This product was last offered at the strikethrough price on
05-03-2026

$ 223.36 USD
Free Shipping on orders $49 and up
Sale - Save 9%
$ 245.99

This product was last offered at the strikethrough price on
05-03-2026

$ 223.36 USD
Free Shipping on orders $49 and up

Ensure optimal performance and longevity for your BMW N54 engine with this comprehensive upgrade kit assembled by enthusiasts at Turner Motorsport!

High-performance low-temp oil thermostat for superior cooling efficiency Anodized aluminum oil thermostat shaft ensures durability and surface protection Premium quality thermostat spring and bung for reliable operation Anodized thermostat cover with external fins maximizes cooling effectiveness Complete installation kit includes gasket and hardware for hassle-free setup Includes Liqui Moly Special-Tec LL 5W-30 oil, new oil filter, filter housing gasket, and drain plug for a complete service Elevate your N54's cooling system and maintain optimal oil temperatures between 194F and 230F with this all-inclusive upgrade kit.

Show More Show Less