BMW Engine Parts for BMW 3 Series E90 (2006-2011)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Febi-Bilstein VANOS Solenoid Valve - 11367585425
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:28304535
Part#: 11367585425
In Stock
$ 108.99

This product was last offered at the strikethrough price on
04-15-2026

$ 78.99 USD
Free Shipping on orders $49 and up
$ 78.99 USD
Free Shipping on orders $49 and up
VANOS solenoid failure is a frequent issue, commonly causing the check engine light and limp mode after aggressive driving.
Titan - Corporate Logo
T#:797051
Part#: TIT62161
Ships on Dec 1, 2026
$ 25.99 USD
Free Shipping on orders $49 and up
Knurled shaft for better grip
Ina - Corporate Logo
T#:19307
Part#: 11287556251
In Stock
$ 40.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Upper Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i 335is - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive

Show More Show Less

Packaged by Turner - Corporate Logo
T#:22163422
Part#: 11287568247TKT
Ships on Nov 12, 2026
Sale - Save 15% $ 209.99

This product was last offered at the strikethrough price on
04-15-2026

$ 178.94 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 209.99

This product was last offered at the strikethrough price on
04-15-2026

$ 178.94 USD
Free Shipping on orders $49 and up
Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and idler pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!
Show More Show Less

Boost Solenoid/Pressure Converter - Kit - N54, N63
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:5416756
Part#: 11747626350TMSKT
In Stock
Sale - Save 45% $ 408.99

This product was last offered at the strikethrough price on
07-14-2026

$ 226.02 USD
Free Shipping
Sale - Save 45%
$ 408.99

This product was last offered at the strikethrough price on
07-14-2026

$ 226.02 USD
Free Shipping
Kit includes both boost solenoids, vacuum hose and T fitting for a easy leak free install
Goldenwrench Supply Co - Corporate Logo
T#:641268
Part#: FXXOCC
In Stock
$ 60.00 USD
Free Shipping
$ 60.00 USD
Free Shipping
Give the plain plastic factory oil cap unit an upgrade with the brand new BLACKLINE Performance Billet Oil Cap Cover. Each cap is CNC formed from T6 Aluminum and anodized with an Anthracite Gray color to compliment the factory engine cover. Featuring an all new Drip G logo, with the BLACKLINE insignia engraved in the cap handle with a reminder to fill the engine with Synthetic Oil Only. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Billet Oil Cap Cover will fit most BMW vehicles equipped with the N55, S55, S63, and S65 with the round shaped oil cap found in the following vehicles E90/E91/E92 M3 LCI, F22 M235i, F87 M2/M2 Competition, F80 M3, F82 M4, F10/F90 M5, and more (check your oil cap ensuring that it is the round shape as seen in the product photos). Each kit comes with a Billet Oil Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Oil Cap Cover affixes to the top of your factory oil cap installing easily in minutes.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:38161701
Part#: 101-0257
In Stock
$ 49.99 USD
Free Shipping on orders $49 and up

Replacement Fuel Filter Element - 6 Micron | Precision Raceworks is designed for BMW and high-performance fuel systems, ensuring optimal fuel flow and superior filtration. This high-efficiency 6-micron filter element effectively captures contaminants, preventing debris from reaching fuel injectors and maintaining peak engine performance.

Regular maintenance of your fuel filter is essential for maximizing fuel system efficiency. Whether for racing or daily driving, this replacement element keeps your fuel system running at its best.

  • 6-micron filtration – Removes fine particles and contaminants to protect engine components
  • High-performance compatibility – Designed for use with Precision Raceworks inline fuel filters
  • Optimized fuel flow – Maintains consistent fuel delivery for peak performance
  • Durable construction – Engineered for long-lasting reliability in high-demand applications
  • Easy replacement – Simple installation for routine maintenance
  • Ideal for both street and track use – Ensures clean fuel supply for all driving conditions

Fuel Filter Replacement Guidelines:

  • Racing applications: Inspect at least twice per season and replace as needed
  • Daily driving: Inspect at least once a year or every 6,000 miles, replacing as necessary

Ensure your BMW fuel system stays clean and efficient with the Replacement Fuel Filter Element - 6 Micron | Precision Raceworks, the ultimate choice for maintaining performance and reliability.

Show More Show Less
BMW E6X / E8X / E9X - N52 Replacement Starter Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15777314
Part#: SR0492NKT2-KT
In Stock
Sale - Save 4% $ 284.99

This product was last offered at the strikethrough price on
08-14-2026

$ 273.79 USD
Free Shipping on orders $49 and up
Sale - Save 4%
$ 284.99

This product was last offered at the strikethrough price on
08-14-2026

$ 273.79 USD
Free Shipping on orders $49 and up
Is your car having trouble starting? Does your starter click when you turn the key? Sounds like it's time for a new starter motor! Includes new starter with no core charge, intake gaskets, throttle body gasket and hardware.
Show More Show Less

NRW Design - Corporate Logo
T#:42403026
Part#: S65VANOSWB
Ships in 1-2 days
$ 389.99 USD
Free Shipping on orders $49 and up
For BMW owners seeking ultimate Vanos system reliability and performance, NRW Design 4130 Chromoly Vanos Covers (With Bolts) from Turner Motorsport provide a proven and durable solution built to endure the demands of high-performance driving.
Show More Show Less

Cylinder Head Oil Check Valve
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:35863150
Part#: 11367541692
In Stock
$ 39.08 USD
Free Shipping on orders $49 and up


Genuine BMW Non-Return Valve
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F10,F25 X3

Fits BMW Engines including:
N51,N52,N52N,N54,N54T

Show More Show Less
TRW - Corporate Logo
T#:594026
Part#: 11347553772
Ships in 4 Business Days
$ 24.34 USD
Free Shipping on orders $49 and up
Replacement Exhaust valve from TRW
Kolbenschmidt - Corporate Logo
T#:1196072
Part#: 11347573840
Ships in 4 Business Days
$ 31.99 USD
Free Shipping on orders $49 and up
Replacement exhaust valve


Genuine BMW - Corporate Logo
T#:30818
Part#: 11117834142
Ships in 7 Business Days
3% off MSRP $ 76.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.99 USD
Free Shipping on orders $49 and up
3% off MSRP
$ 76.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.99 USD
Free Shipping on orders $49 and up

Upgrade Your BMW with Genuine BMW Hex Bolt With Washer M8X94 - 11117834142 - E60 M5,E63 M6

Upgrade your BMW's integrity and performance with the Genuine BMW Hex Bolt With Washer M8X94 - 11117834142 - E60 M5,E63 M6. Crafted to exacting standards, this authentic hex bolt ensures secure fastening and durability for your BMW E60 M5 or E63 M6. Engineered for precision, it offers peace of mind knowing your BMW is equipped with genuine parts. Whether you're conducting routine maintenance or performing repairs, trust Genuine BMW Hex Bolts to maintain the structural integrity and performance of your BMW.

  • Genuine BMW hex bolt with washer for superior quality
  • Crafted to exacting standards for secure fastening
  • Engineered for precision and durability
  • Enhances structural integrity of your BMW
  • Ideal for routine maintenance and repairs


Genuine BMW Hex Bolt With Washer - M8X94
This item fits the following BMW Chassis:
E60 M5,E63 M6,E63

Fits BMW Engines including:
S85

Show More Show Less
B58 Ignition Coil Upgrade Adapter Kit - N55/S55
Not forsale in the state of California!
Nexsys Motorsport - Corporate Logo
T#:6811828
Part#: ICU-NS55-N5-PL
Ships on Oct 27, 2026
$ 299.99 USD
Free Shipping
$ 299.99 USD
Free Shipping
Does not include ignition coils. To mount the B58 coils onto the N55 & S55 engine the folks at Nexsys developed billet aluminum brackets that are Made in the USA.
Genuine BMW - Corporate Logo
T#:179873
Part#: 16124800029
In Stock
4% off MSRP $ 27.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 26.99 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 27.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 26.99 USD
Free Shipping on orders $49 and up
This adapter allows the low-pressure fuel sensor to properly connect to the low-pressure fuel supply line.

Low Pressure Fuel Pump - N52 N54 N55 3.0L
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:588782
Part#: 16147163298
In Stock
$ 158.99 USD
Free Shipping
$ 158.99 USD
Free Shipping

For BMW owners facing issues with their gas gauge or experiencing fuel pump failure, this replacement is the ideal solution.

  • Restores accurate gas gauge readings
  • Addresses fuel pump failure effectively
  • Direct replacement for seamless installation
  • Ensures reliable fuel level monitoring
  • Compatible with various BMW models

Ensure your BMW's fuel system stays in top condition with this reliable replacement, providing accurate gas gauge readings and resolving fuel pump issues.

Show More Show Less

Genuine BMW Rear Crankshaft Seal
For vehicles with production date up to 01/2009
Genuine BMW - Corporate Logo
T#:25041
Part#: 11117584398
In Stock
7% off MSRP $ 60.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 56.99 USD
Free Shipping on orders $49 and up
7% off MSRP
$ 60.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 56.99 USD
Free Shipping on orders $49 and up


Genuine BMW Shaft Seal - 90X110X12
This item fits the following BMW Chassis:
E70 X5,E71,E82,E83 X3,E85,E86,E90,E92,E93,F01,F02,F10

Fits BMW Engines including:
N51,N52,N52N,N54,N54T

Show More Show Less
Bremmen Parts Chain Tensioner - With Gasket Ring
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:556062
Part#: 11317584723
In Stock
Sale - Save 15% $ 93.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.89 USD
Free Shipping
Sale - Save 15%
$ 93.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.89 USD
Free Shipping
Addresses chain slap or other noise caused by a failed or failing tensioner

Bremmen Parts - Corporate Logo
T#:640545
Part#: 16147163298
In Stock
Sale - Save 10% $ 148.99

This product was last offered at the strikethrough price on
05-03-2026

$ 134.02 USD
Free Shipping
Sale - Save 10%
$ 148.99

This product was last offered at the strikethrough price on
05-03-2026

$ 134.02 USD
Free Shipping
Sputtering, no starts, or rough idle could be an indication of a failing or failed fuel pump. Also, if your gas gauge is not reading correctly, or not at all, it's probably the level sensor on this pump. Unfortunately, the level sensor is part of the pump assembly and must be replaced as a whole. This replacement Bremmen fuel pump is the perfect option to get your BMW back on the road without draining your wallet.
Show More Show Less
MMX Performance - Corporate Logo
T#:22723756
Part#: MMR03-0504
Ships in 3 Business Days
$ 37.99 USD
Free Shipping on orders $49 and up
$ 37.99 USD
Free Shipping on orders $49 and up

Check Valve - 11367541692
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:37655979
Part#: 11367541692
In Stock
Sale - Save 11% $ 32.99

This product was last offered at the strikethrough price on
05-03-2026

$ 29.37 USD
Free Shipping on orders $49 and up
Sale - Save 11%
$ 32.99

This product was last offered at the strikethrough price on
05-03-2026

$ 29.37 USD
Free Shipping on orders $49 and up
A damaged, leaking, or missing vacuum check valve can lead to engine performance problems, trigger the check engine light, and potentially cause your vehicle to fail an emissions test.

Vargas Turbo Technologies - Corporate Logo
T#:389684
Part#: VTT-N54-PCV
In Stock
$ 68.99 USD
Free Shipping on orders $49 and up
The crankcase oil vent system on the N52/N54 is one of its weakest and cheaply designed systems. We see crankcase vent issues on even stock engines but with more boost the problems are exponential. This Vargas upgraded PCV valve, and an oil catch can, are what the N54 engine needs and may alleviate most of your oil and boost leak issues. The PCV valve is supposed to let oil either return to the oil pan or pass through the intake manifold and get burned up in the combustion chamber. However, BMW used a weak plastic vent valve that doesn't seal well when under boost. Instead of  closing and venting the oil out of the intake, it's forced through this valve and into the intake and coating your valves with oil residue and carbon. Most boost equals more oil forcing its way by. This upgraded N54 PCV valve uses higher grade materials, including aluminum, to provide a better seal and prevent oil from entering the intake. It's an easy install and a must-have item when considering any turbo work.
Show More Show Less
OEM INA Accessory Belt Tensioner Assembly - N55
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:386297
Part#: 11287582946
In Stock
$ 115.99

This product was last offered at the strikethrough price on
09-16-2026

$ 95.99 USD
Free Shipping
$ 95.99 USD
Free Shipping

This is an OEM INA mechanical tensioner for the serpentine belts on BMW's with the N55 engine. This tensioner keeps the belt for the alternator, power steering and Air Conditioning taught to provide maximum performance of each system.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
BMW N51 / N52 3.0L Spark Plug - Set Of 6 (LZFR6AP11GS)
We Price Match - Give Us A Call or Chat!
NGK - Corporate Logo
T#:381251
Part#: 12120037663NGKKT
In Stock
$ 113.99 USD
Free Shipping
$ 113.99 USD
Free Shipping

BMW N52 3.0L Spark Plug - Set Of 6 (LZFR6AP11GS) ensures optimal engine performance by providing reliable ignition and efficient combustion. These high-quality spark plugs are essential for maintaining the performance of BMW N52 engines, as poor spark can lead to reduced fuel economy, lower horsepower, and the dreaded check engine light.

Replacing spark plugs every 60,000 miles is crucial to restoring and enhancing your vehicle's performance. With these spark plugs, drivers can expect improved acceleration, smoother idling, and better overall engine responsiveness.

  • Direct replacement for BMW N52 3.0L engines, ensuring compatibility and optimal performance
  • High-quality construction designed to withstand high temperatures and pressures
  • Improved fuel economy and reduced emissions for a more eco-friendly drive
  • Restores lost power and acceleration, enhancing the driving experience
  • Recommended replacement interval of every 60,000 miles for peak performance
Show More Show Less


Bav Auto Fuel Injector Removal/Installation Tool - N55
For E - Chassis N55
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580388
Part#: B8800075
Ships on Feb 26, 2027
Sale - Save 20% $ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD
Free Shipping
Sale - Save 20%
$ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD
Free Shipping
This tool takes the stress and difficulty out of removing and installing your N55 fuel injectors.
Lower Idler Pulley
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:32350850
Part#: 11287557851
In Stock
Sale - Save 15% $ 27.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.79 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 27.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.79 USD
Free Shipping on orders $49 and up
Elring Valvetronic Camshaft Adjuster Gasket
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:587127
Part#: 11127552280
In Stock
$ 28.79 USD
Free Shipping on orders $49 and up
Sits between the adjuster and the cylinder head

Motiv Motorsports - Corporate Logo
T#:29101684
Part#: 900.1001
In Stock
$ 729.00 USD
Free Shipping on orders $49 and up
The motive ReFlex+ Control Unit is an advanced I/O integration module that allows precise control of aftermarket components and sends data to the factory DME (ECU) via CANbus communication, expanding performance tuning capabilities. This control unit allows for precise control of fuel pumps, methanol injection kits, nitrous kits, boost controllers, relay triggers, port injection systems, flex fuel systems, and more. Supporting sequential port injection for up to eight injectors and real-time monitoring of injectors, this unit is a great choice for precise control of fuel delivery to your engine.
Show More Show Less

Engine Oil Temperature Sensor
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:36777927
Part#: 13627580635
In Stock
Sale - Save 21% $ 26.99

This product was last offered at the strikethrough price on
05-03-2026

$ 21.21 USD
Free Shipping on orders $49 and up
Sale - Save 21%
$ 26.99

This product was last offered at the strikethrough price on
05-03-2026

$ 21.21 USD
Free Shipping on orders $49 and up
Advanced Auto Fabrication - Corporate Logo
T#:7624643
Part#: 116183
In Stock
$ 190.00 USD
Free Shipping
$ 190.00 USD
Free Shipping
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. A must have for all track cars. **Note: Requires Welding to install.
Show More Show Less

Valve Cover Gasket Overhaul Kit - E9X 328i, E60 528i, E83 X3 3.0i/si,...
For vehicles with a production date from 10/2006
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:180875
Part#: TMS180875
In Stock
$ 142.24

This product was last offered at the strikethrough price on
05-07-2026

$ 107.43 USD
Free Shipping
$ 107.43 USD
Free Shipping
Not only will this kit stop most E90 oil leaks, it's the perfect addition for ignition coil or spark plug replacement! Oil leaks - and the damage they can cause - seem to be the worst annoyances on these cars. The biggest source of an oil leak is from the valve cover, followed by the oil filter housing, Valvetronic seal, camshaft seals, and the eccentric shaft sensor seal. Once the oil leaks, and if ignored for an extended time, the oil will contaminate vital electrical sensors. This is especially the case with ignition coils and also the eccentric shaft sensor on the Valvetronic shaft at the top of the cylinder head. During any ignition coil and spark plug replacement take a close look inside for any oil pooling at the bottom. We have been seeing valve cover oil leaks as soon as 40,000 miles. We look for oil leaks on every E90 that comes into our shop.

We have put together this package of valve cover gaskets and other related gaskets and seals for you to fully overhaul the N52 valve cover and put a stop to those pesky oil leaks. This package has the replacement parts for N52 engines built from the 2007 model year and includes:

  • 11127582245 - N52 valve cover gasket set
  • 11127552280 - N52 eccentric shaft sensor seal
  • 11127559699 - N52 Valvetronic gasket

2007 and later N51/N52 engines do not need replacement valve cover bolts, unless the bolts are actually broken off or missing. Unlike the 2006 aluminum hardware, the later parts are steel and not 1-time use.

These are all OEM or OE parts. Replacement of these gaskets and seals is straight-forward but a long process. BMW dealers typically charge for over eight hours of labor. If you have replaced spark plugs before you should be capable of this repair. In addition, there are several other parts to replace while you're in the vicinity: camshaft sensor o-rings, oil filter housing profile gasket, VAN0S solenoids, and the eccentric shaft sensor. These other parts, except the eccentric shaft sensor (see below), are replaceable without removing the valve cover but are more easily accessed during the valve cover work.

Eccentric Shaft Sensor: This is the position sensor that relays the eccentric shaft's position back to the DME. It's located at the front of the engine and is only accessible with the valve cover off . The seal around the sensor can fail and allow oil to blow out from under the cam cover. Oil can then leak into the sensor itself and cause it to fail. Without a functioning sensor your E90 can experience poor running, hesitation, poor performance, jerky shifts, and sluggish response. It's easy to check and see if oil has accumulated inside the sensor: unbolt the engine trim cover (the outer cover with the BMW roundel), unplug the sensor, and look inside. If oil is present inside or even around the sensor itself, plan on replacing this sensor during your next ignition coil, spark plug, and/or valve cover gasket work.

This valve cover kit fits the following BMWs:
2008-2012 E82 BMW 128i
2007-2011 E90 BMW 328i 328xi 328i xDrive - Sedan
2007-2012 E91 BMW 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2007-2010 E60 BMW 528i 528xi 528i xDrive
2011 F10 BMW 528i
2007-2010 E83 BMW X3 3.0i X3 3.0si
2007-2013 E70 BMW X5 3.0si
10/2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i
Show More Show Less
Genuine BMW Cylinder Head Gasket - N54 3.0L
1.215mm thickness - for use with an unmachined head
Genuine BMW - Corporate Logo
T#:22177
Part#: 11127557265
Ships in 1-2 days
13% off MSRP $ 233.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 202.99 USD
Free Shipping
13% off MSRP
$ 233.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 202.99 USD
Free Shipping


Genuine BMW Cylinder Head Gasket Asbestos-Free - 1,215Mm
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02

Fits BMW Engines including:
N54,N54T

Show More Show Less

Genuine BMW - Corporate Logo
T#:13062
Part#: 12120032273
In Stock
27% off MSRP $ 36.21

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 26.50 USD
Free Shipping on orders $49 and up
27% off MSRP
$ 36.21

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 26.50 USD
Free Shipping on orders $49 and up
Poor idle, low fuel efficiency, and engine misfire codes are all symptoms of worn spark plugs. Replace yours with quality aftermarket parts to get your engine running as well as possible.

Goldenwrench Supply Co - Corporate Logo
T#:9901260
Part#: FXXOFH-G
In Stock
$ 147.00 USD
Free Shipping
$ 147.00 USD
Free Shipping

BMW Gray Filter Housing Cap - Blackline Performance Edition Oil is a premium upgrade designed to replace the standard OEM plastic oil filter housing cap. This high-quality billet aluminum cap enhances both the aesthetics and functionality of your BMW's engine.

  • Durable Construction: Made from 6061 T6 aluminum with a hard anodized finish for superior strength and longevity.
  • Improved Performance: Features better heat dissipation compared to the factory plastic cap, enhancing engine performance and reliability.
  • Enhanced Aesthetics: Adds a sleek, high-performance look to your engine bay with 3D precision post-milled detailing and the G Insignia Oil Filter Cage Stabilizer.
  • Easy Installation: CNC-formed hand grips and a 10mm Allen key maintenance port with a built-in scratch plate simplify the installation and maintenance process.
  • Direct Replacement: Retains the factory oil filter stalk and is compatible with BMW S55 and most N series engines using BMW part 11427525334.
  • Increased Longevity: Designed to increase the life span of your oil filter cap and provide a more reliable seal.
Show More Show Less
ECS Tuning Performance Kevlar Reinforced Belt - N52
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:5858454
Part#: 6PK1990
In Stock
$ 45.99 USD
Free Shipping on orders $49 and up
Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts.
Precision Raceworks - Corporate Logo
T#:38161736
Part#: 201-0405
In Stock
$ 24.99 USD
Free Shipping on orders $49 and up
This fitting allows you to install a 1/8" npt port anywhere you have an existing quick connect Compatible with the Motiv 0-10 Bar pressure sensor


FAE - Corporate Logo
T#:583140
Part#: 13627525015
In Stock
$ 45.99 USD
Free Shipping on orders $49 and up
Having a crank but no starting issue? This sensor is often the culprit
Bosch - Corporate Logo
T#:367132
Part#: 13537808089
In Stock
$ 654.99

This product was last offered at the strikethrough price on
07-06-2026

$ 455.99 USD
Free Shipping on orders $49 and up
$ 455.99 USD
Free Shipping on orders $49 and up
Fuel injector supplies fuel from the rail to the cylinder
Genuine BMW - Corporate Logo
T#:33083
Part#: 11247841702
In Stock
7% off MSRP $ 56.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 52.99 USD
Free Shipping on orders $49 and up
7% off MSRP
$ 56.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 52.99 USD
Free Shipping on orders $49 and up
Lower bearing located between the connecting rod and the crankshaft.

Genuine BMW - Corporate Logo
T#:30558
Part#: 11110426591
In Stock
$ 104.80 USD
Free Shipping
$ 104.80 USD
Free Shipping


Genuine BMW Set Of Aluminum Screws F Compl.Crankcase
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N51,N54,N54T,N55

Show More Show Less

Genuine BMW - Corporate Logo
T#:2792
Part#: 11127581215
In Stock
33% off MSRP $ 63.69

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.98 USD
Free Shipping on orders $49 and up
33% off MSRP
$ 63.69

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.98 USD
Free Shipping on orders $49 and up
Replacement valve cover gaskets including large cover gasket and spark plug cavity gaskets. Fits E90 325I 325XI 330I 330XI - E60 525i 530i 2006-2007 Z4 3.0i 3.0si with N52 engine.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

The aluminum valve cover bolts MUST be replaced. They are 1-time use only from BMW. They are torqued from the factory and become stretched. They cannot be re-used. br>
This item fits the following BMWs:
2006 E90 BMW 325i 325xi 330i 330xi
2006-2007 E60 BMW 525i 525xi 530i 530xi
2006-2008 E85 BMW Z4 3.0i Z4 3.0Si
Show More Show Less
Genuine BMW - Corporate Logo
T#:180874
Part#: TMS180874
In Stock
$ 164.85

This product was last offered at the strikethrough price on
04-21-2026

$ 155.06 USD
Free Shipping
$ 155.06 USD
Free Shipping

Not only will this kit stop most E90 oil leaks, it's the perfect addition for ignition coil or spark plug replacement! Oil leaks - and the damage they can cause - seem to be the worst annoyances on these cars. The biggest source of an oil leak is from the valve cover, followed by the oil filter housing, Valvetronic seal, camshaft seals, and the eccentric shaft sensor seal. Once the oil leaks, and if ignored for an extended time, the oil will contaminate vital electrical sensors. This is especially the case with ignition coils and also the eccentric shaft sensor on the Valvetronic shaft at the top of the cylinder head. During any ignition coil and spark plug replacement take a close look inside for any oil pooling at the bottom. We have been seeing valve cover oil leaks as soon as 40,000 miles. We look for oil leaks on every E90 that comes into our shop.

We have put together this package of valve cover gaskets and other related gaskets and seals for you to fully overhaul the N52 valve cover and put a stop to those pesky oil leaks. This package has the replacement parts for N52 engines built up to 10/2006 and includes:
 

  • 11127581215 - N52 valve cover gasket set
  • 11120409288 - N52 aluminum valve cover bolts (1-time use only, not re-usable)
  • 11377516302 - N52 Valvetronic gasket
  • 11127528242 - N52 eccentric shaft sensor seal


These are all Genuien BMW parts. Replacement of these gaskets and seals is straight-forward but a long process. BMW dealers typically charge for over eight hours of labor. If you have replaced spark plugs before you should be capable of this repair. In addition, there are several other parts to replace while you're in the vicinity: camshaft sensor o-rings, oil filter housing profile gasket, VAN0S solenoids, and the eccentric shaft sensor. These other parts, except the eccentric shaft sensor (see below), are replaceable without removing the valve cover but are more easily accessed during the valve cover work.

Eccentric Shaft Sensor: This is the position sensor that relays the eccentric shaft's position back to the DME. It's located at the front of the engine and is only accessible with the valve cover off. Over time the seal around the sensor comes loose and oil is allowed to blow out of the cam cover and it eventually finds its way into the sensor (which will eventually fail). Without a functioning sensor your E90 can experience poor running, hesitation, poor performance, jerky shifts, and sluggish response. It's easy to check and see if oil has accumulated inside the sensor: unbolt the engine trim cover (the outer cover with the BMW roundel), unplug the sensor, and look inside. If oil is present inside or even around the sensor itself, plan on replacing this sensor during your next ignition coil, spark plug, and/or valve cover gasket work.

This valve cover kit fits the following BMWs:
2006 E90 BMW 325i 325xi 330i 330xi - Sedan
2006 E91 BMW 325xi - Wagon
2006 E60 BMW 525i 525xi 530i 530xi
2006-10/2006 E85 BMW Z4 3.0i Z4 3.0si

Show More Show Less

Bav Auto Ignition Coil - N20 N52 N55 N54 N62 S55
10X Entries Into Our F80 M3 Sweepstakes
Bavarian Autosport - Corporate Logo
T#:578619
Part#: 12137571643A
In Stock
Sale - Save 20% $ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 30.39 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 30.39 USD
Free Shipping on orders $49 and up
Restores your engines smooth operation with new ignition coils from Bav Auto! Boot included with coil. Same as 12131712219, 12130148594, 12130390064, 12137594938, 12137551049, 12137562744, 12137571643, 12138647689, 12137594937, 12137571643. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.
Show More Show Less
Genuine BMW - Corporate Logo
T#:567705
Part#: 11238090136
Ships in 1-2 days
5% off MSRP $ 21.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 20.99 USD
Free Shipping on orders $49 and up
5% off MSRP
$ 21.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 20.99 USD
Free Shipping on orders $49 and up
Also utilized by BMW with the sprocket located in the oil pump system on N54 engines.

VRSF 1.75" OEM Location High Flow Silicone Inlet Kit - N54
We Price Match - Give Us A Call or Chat! 1.75" Inlets
VRSF - Corporate Logo
T#:585220
Part#: 10901050
In Stock
$ 229.99 USD
Free Shipping
$ 229.99 USD
Free Shipping
Improve your restrictive OEM intake with this 1.75" Relocated Silicone High Flow Inlet Kit. You will experience drastic increases in flow especially in mid to upper RPM ranges, as well as a more aggressive exhaust note. The VRSF OEM location inlet upgrade kit provides a more direct, high flowing intake path for your turbos. This kit includes everything you need to replace the OEM inlets, including relocation brackets, filters, hoses, and the steel wire reinforced silicon tubing.
Show More Show Less

Genuine BMW - Corporate Logo
T#:42519
Part#: 13547522361
In Stock
4% off MSRP $ 25.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.99 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 25.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.99 USD
Free Shipping on orders $49 and up
This is the large round seal ring that fits with the throttle body on N52 and N54 engines. It's a good idea to replace this throttle body gasket any time you have the intake or throttle body off (such as when doing the 330 manifold upgrade) or accessing parts under the manifold.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 1M Coupe
2008-2010 E82 BMW 135i
2006-2010 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2007-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2010 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 328i - Convertible
2007-2010 E93 BMW 335i - Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive
2006-2010 E83 BMW X3 3.0i X3 3.0si
2007-2013 E70 BMW X5 3.0si
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009-2010 Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Show More Show Less
High-Performance Ignition Service Kit - BMW N54 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:583535
Part#: N54PISKT1
In Stock
Sale - Save 18% $ 279.99

This product was last offered at the strikethrough price on
05-03-2026

$ 228.29 USD
Free Shipping
Sale - Save 18%
$ 279.99

This product was last offered at the strikethrough price on
05-03-2026

$ 228.29 USD
Free Shipping
Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced. Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! This kit contains: 6 BOSCH Spark Plugs 6 Bavarian Autosport Ignition Coils 1 Dielectric Spark Plug Boot Protector - 4 Gram Packet
Show More Show Less
Genuine BMW - Corporate Logo
T#:33446260
Part#: 07141696931
Ships in 1-2 days
$ 35.00 USD
Free Shipping on orders $49 and up
Genuine BMW O-Ring - 12X1.5 This item fits the following BMW Chassis: E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36 Fits BMW Engines including: N55, B58


Elring Crankshaft Seal - Front
For vehicles with a production date up to 02/2011
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:362853
Part#: 11117547842
In Stock
$ 22.99 USD
Free Shipping on orders $49 and up
$ 22.99 USD
Free Shipping on orders $49 and up
65x79x10 - Usually replaced when servicing the timing chains
ACL - Corporate Logo
T#:587434
Part#: 8B1580H-STD
Ships in 2 Business Days
$ 252.99 USD
Free Shipping on orders $49 and up

Introducing the BMW S65 V8 (E9X M3) Race Series High-Performance Con Rod Bearing Set by Automotive Components Limited. Elevate your BMW's performance with these precision-engineered con rod bearings, specifically designed for the S65 V8 engine featured in the E90 M3

Key Features:

Premium Quality: Crafted with the utmost precision and durability, this con rod bearing set ensures high performance and reliability for your BMW. Race Series Design: Engineered to meet the demands of race applications, these bearings are well-suited for high-performance driving scenarios. Enhanced Engine Protection: The bearings provide essential protection for your engine components, ensuring their longevity even under extreme conditions. Perfect Fit: Designed to seamlessly fit the BMW S65 V8 engine in the E9X M3, these bearings are a direct replacement for your stock components. Improved Performance: Experience enhanced engine performance and responsiveness, making it ideal for racing and high-performance driving. Upgrade your BMW S65 V8 engine in the E9X M3 with the Race Series High-Performance Con Rod Bearing Set from Automotive Components Limited. Enhance your vehicle's performance and enjoy peace of mind knowing your engine is protected by top-quality components.

Show More Show Less