BMW Engine Parts for BMW 3 Series E90 (2006-2011)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

CSF Race-Spec Oil Cooler - E9x M3
2X Entries For Our G87 M2 Sweepstakes!
CSF - Corporate Logo
T#:384657
Part#: 8025
Ships in 1 Business Day
$ 599.00 USD
Free Shipping
$ 599.00 USD
Free Shipping

CSF is one of the premier cooling product specialists available on the market today. One item that is often overlooked is the oil cooler. Luckily CSF has taken up the task of upgrading the oil cooler as well. If the oil runs too hot, it can lead to a reduction in wear protection and damage to the head, block, or the turbo system. This unit has 8 cooling cores and still fits in the stock location without any issues.

Fits the following BMW:
2008-2013 E9X BMW M3

Show More Show Less
OEM Bosch Rear Bank 1 Post-Cat Oxygen Sensor - 560mm - E70 E83 E82/88...
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Bosch - Corporate Logo
T#:374246
Part#: 11787545074
In Stock
$ 228.99 USD
Free Shipping
$ 228.99 USD
Free Shipping

The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. Bosch's Oxygen sensors are high quality and will give you the longest and best performance for the price.

This is the OEM Bosch oxygen sensor for BMW's with the N52, N54, and N55 3.0L engines. This 560mm bank 1 oxygen sensor is mounted after the catalytic converter.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Oil Pan Gasket - Multiple BMWs
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:24145943
Part#: 11137600482
In Stock
$ 25.57 USD
Free Shipping on orders $49 and up
Replace your worn out and leaking oil pan gasket and avoid having to top off between oil changes.

Dinan - Corporate Logo
T#:14585036
Part#: D650-0003KT7
In Stock
Sale - Save 17% $ 286.99

This product was last offered at the strikethrough price on
02-26-2026

$ 238.35 USD
Free Shipping on orders $49 and up
Sale - Save 17%
$ 286.99

This product was last offered at the strikethrough price on
02-26-2026

$ 238.35 USD
Free Shipping on orders $49 and up

Enhance Your N52 3.0 Engine with Dinan Performance Ignition Service Kit

Upgrade your driving experience with the Dinan Performance Ignition Service Kit, specifically designed for the N52 3.0 naturally aspirated in-line six engine. This meticulously crafted kit is engineered to elevate your engine's ignition performance.

Key Features:

  • Precision-engineered ignition coils for improved spark delivery
  • High-performance spark plugs for enhanced combustion
  • Quality hardware ensuring reliability and durability
  • Increased power and smoother engine operation
  • Improved throttle response and fuel efficiency

Unleash the true potential of your vehicle by improving throttle response, fuel efficiency, and overall engine performance with Dinan's high-quality components. Elevate your driving experience and feel the difference with the Dinan Performance Ignition Service Kit.

Show More Show Less

Motiv Motorsports - Corporate Logo
T#:29500156
Part#: 200.1105
In Stock
$ 24.00 USD
Free Shipping on orders $49 and up
Quick disconnect adapters (QDA) are commonly used to adapt different components into vehicle fuel systems without requiring permanent modification. These adapters are machined from high-grade aluminum and anodized for corrosion resistance. QDAs incorporate Viton© o-rings which are compatible with most types of fuel, solvents and oils. QDAs maintain a reliable leak-proof seal under normal fuel injection system operating pressures. This particular QDA is sized perfectly to adapt right between the fuel line you were going to connect to your ethanol sensor. 3/8" (9.5mm) female quick disconnect 3/8" (9.5mm) male quick disconnect 1/8" Female pipe thread port * Viton© o-rings Crecent-lock system E-85 compatible Black anodized aluminum
Show More Show Less

URO Valvetronic Camshaft Adjusting Unit - BMW N52 3.0L
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:8677205
Part#: 11377548388
In Stock
$ 137.99 USD
Free Shipping
$ 137.99 USD
Free Shipping
This new Valvetronic variable valve timing actuator works by adjusting the eccentric shaft, increasing or decreasing valve lift and duration for optimal performance. If your actuator has failed, you will notice a significant power and performance decrease and an engine service light illuminated on the dash. Replace your with this quality URO replacement to restore performance and get your BMW back on the road! Features: Guaranteed fitment High-strength materials withstand engine heat and vibration Manufactured to OE dimensions for proper clearances and alignment Matches OE specifications for proper timing at all engine speeds 24-Month Unlimited Mileage Warranty
Show More Show Less
Precision Raceworks - Corporate Logo
T#:5215998
Part#: 601-0018
In Stock
$ 549.99 USD
Free Shipping on orders $49 and up
When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running an ethanol blend. Bring your fuel system up to par with the Black Market Parts (By Precision Raceworks) Low-Pressure Bucketless Fuel Pump! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. The Black Market Parts Stage 3 bucketless fuel pump kit includes a genuine Walbro 450 (F90000274) fuel pump, of supporting up to 1050whp on 93 octane pump gas or 875whp on 100% E85, and is the perfect modular pump to get you started! Since Precision Raceworks is always looking ahead, they have designed their modular bucketless fuel pump to allow you to upgrade your fuel pump as needed! With an open expansion slot ready to use, just a simple Stage 3.5 or Stage 4 module is all you need to purchase to increase your fueling capabilities. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course or drag racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you. Stage 2 Specifications: Horsepower Supported Pump Gas: ~1050whp Horsepower Supported 100% E85: ~875whp Aftermarket EKP Required: No *To reach the advertised ability of these fuel pumps use of the Precision Raceworks in-tank filter regulator assembly is required.
Show More Show Less

Bav Auto Tools - Corporate Logo
T#:580351
Part#: B8800022
Ships on Sep 1, 2026
Sale - Save 25% $ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD
Free Shipping on orders $49 and up
This special long, thin, Torx socket is required for removal and installation of the head bolts on most BMWs with twin-cam cylinder heads. 1/2" drive

Motiv Motorsports - Corporate Logo
T#:29201083
Part#: 900.1016
Ships in 5 Business Days
$ 95.00 USD
Free Shipping on orders $49 and up
A flying lead harness is a wiring harness that is unterminated at one end and has an excess length of wire so that installation can be customized by the end user. That makes this section of the ReFlex+ Install Harness truly universal. On one end, this harness has an 8-pin connector to plug into any one of our ReFlex+ Main Injector Harnesses. The other end of each wire is unterminated and will be connected to the appropriate sensor, ground, or power supply based on installation instructions. Each harness has a wire for: Switched +12v Input w/ inline fuse +5v Input Ground Can HI Can Lo Cam Sensor Signal Crank Sensor Signal Map Sensor Signal
Show More Show Less
Supertech - Corporate Logo
T#:21604314
Part#: KPR-5.0-7S-24
In Stock
$ 72.99 USD
Free Shipping on orders $49 and up
Two required per valve, for use with certain supertech valves 5.0mm single groove
Vargas Turbo Technologies - Corporate Logo
T#:38924625
Part#: VTT-CRANKBREATHE
In Stock
$ 127.99 USD
Free Shipping
$ 127.99 USD
Free Shipping
VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW B58 applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. This breather can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including most aftermarket oil catch can systems! The breather sits about 2.5' tall from the valve cover oil cap area, and the filter is 2-3/4' in diameter Is your car a Gen1 or TU? Pull your oil cap off, and check how it attaches. 2 Prong style is Gen-1, snap-in style with grooves is TU.
Show More Show Less


Genuine BMW - Corporate Logo
T#:43841
Part#: 13907838441
In Stock
5% off MSRP $ 308.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 294.99 USD
Free Shipping
5% off MSRP
$ 308.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 294.99 USD
Free Shipping
BMW part number 13907838441 is a fuel tank breather line designed for the 2008-2013 BMW E90, E92, and E93 M3 models. This component links the fuel tank to the breather valve, playing a vital role in the evaporative emissions control system by properly venting fuel vapors. Key Features: Functionality: Ensures safe transfer of fuel vapors from the tank to the breather valve, supporting emissions control. Compatibility: Specifically designed for E90 (Sedan), E92 (Coupe), and E93 (Convertible) M3 models equipped with the S65 4.0L V8 engine. Genuine BMW Part: Guarantees proper fitment, durability, and compliance with BMW’s quality standards. Genuine BMW Pipe - This item fits the following BMW Chassis: E90,E92,E93 Fits BMW Engines including: S65
Show More Show Less
Corteco - Corporate Logo
T#:596691
Part#: 11340035853
In Stock
$ 33.99

This product was last offered at the strikethrough price on
02-24-2026

$ 22.99 USD
Free Shipping on orders $49 and up
$ 22.99 USD
Free Shipping on orders $49 and up
Burning oil at start-up and the first few minutes of running often is a sign your valve seals are bad. What happens is your valve seals become brittle and shrink up when cold, causing oil consumption and blue smoke from the exhaust. When the engine warms up, the seals expand, stopping the consumption.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:398463
Part#: VTT-N55-INSTL
Ships in 1 Business Day
$ 222.99 USD
Free Shipping
$ 222.99 USD
Free Shipping

Vargas Turbo has done it again. They've made it even easier for you to get your car back on the road and running right again with your new turbos. They've put together an install kit containing all the components you need to get your new turbos installed properly and efficiently. This means you can get your car back on the road faster and enjoy your new turbos! 

Starting in 1978, Vargas Turbo Technologies was built upon the dream of utilizing then-new turbocharger technology to improve the performance of everything from cars to boats. On the cutting edge since the beginning, the company has grown with the industry, servicing diesel and industrial turbochargers. Returning to their hot-rod roots, Vargas has jumped head-first into the BMW performance market, filling a need for high-quality, cost effective turbocharger upgrades for everything from daily-driven street cars to all-out racing machines.

Show More Show Less

Genuine BMW - Corporate Logo
T#:39499
Part#: 12427840580
In Stock
3% off MSRP $ 60.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 58.99 USD
Free Shipping on orders $49 and up
3% off MSRP
$ 60.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 58.99 USD
Free Shipping on orders $49 and up


Genuine BMW Ground Cable -
This item fits the following BMW Chassis:
E90,E92,E93

Fits BMW Engines including:
S65


AdBlue DEF Fluid - 9.46 Liters
Compatible with diesel BMW's urea systems, used to reduce NOx emissions.
Genuine Volkswagen Audi - Corporate Logo
T#:22558987
Part#: GUS052910A3
In Stock
$ 34.86 USD
Free Shipping on orders $49 and up
$ 34.86 USD
Free Shipping on orders $49 and up

For BMW enthusiasts committed to optimizing their vehicle's performance, the AdBlue Diesel Exhaust Fluid (DEF) - 9.46 Liters is the perfect solution. Engineered to enhance BMW diesel engines' efficiency, this DEF fluid ensures that your vehicle remains compliant with emission standards while operating at its peak.

  • Exceptional Purity: The AdBlue DEF Fluid - 9.46 Liters offers superior purity, safeguarding your BMW's exhaust system and reducing harmful emissions.
  • Emissions Compliance: Maintain your BMW's compliance with strict emission regulations, ensuring you can drive with peace of mind.
  • Extended Range: With 9.46 liters of DEF fluid, you'll enjoy an extended range before requiring a refill, providing convenience for your journeys.
  • Effortless Refilling: The user-friendly design of the container makes refilling your DEF reservoir a hassle-free task.
  • BMW Compatibility: This DEF fluid is tailored to meet BMW's stringent requirements, assuring compatibility with your vehicle.

Choose the AdBlue DEF Fluid - 9.46 Liters to enhance your BMW's efficiency and environmental responsibility. Drive confidently, knowing your vehicle is optimized for peak performance and emissions compliance.

Show More Show Less
Genuine BMW - Corporate Logo
T#:32715
Part#: 11217841605
In Stock
6% off MSRP $ 51.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 48.99 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 51.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 48.99 USD
Free Shipping on orders $49 and up


Genuine BMW Bearing Shell Yellow - 70,00Mm(0)
This item fits the following BMW Chassis:
E60 M5,E63 M6,E63,E90,E92,E93

Fits BMW Engines including:
S65,S85

Show More Show Less

OEM Rein Front Turbo Oil Return Line - N54
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Rein - Corporate Logo
T#:402125
Part#: 11427563713
In Stock
$ 132.99

This product was last offered at the strikethrough price on
05-05-2026

$ 83.99 USD
Free Shipping
$ 83.99 USD
Free Shipping
This is the oil line responsible for carrying oil away from the front turbocharger. When these lines leak, they leak profusely, so be sure and replace them any time a leak starts.
Precision Raceworks - Corporate Logo
T#:38195449
Part#: 501-0043
Ships in 5 Business Days
$ 159.99 USD
Free Shipping on orders $49 and up
Adjust your fuel pressure as needed. Thanks to the 1:1 boost reference, fuel pressure will increase as boost pressure increases, ensuring fuel delivery remains optimal under all conditions.

Packaged by Turner - Corporate Logo
T#:40782380
Part#: N55RODBRGDRYKT
Ships in 7 Business Days
Sale - Save 3% $ 399.64

This product was last offered at the strikethrough price on
05-03-2026

$ 388.88 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 399.64

This product was last offered at the strikethrough price on
05-03-2026

$ 388.88 USD
Free Shipping on orders $49 and up
This kit includes everything needed to replace the rod bearings in your N55 engine other than the engine oil and assembly lube. Kit includes Upper and lower rod bearings Hardware Oil filter Oil pan gasket
Show More Show Less

Genuine BMW - Corporate Logo
T#:42219
Part#: 13537576771
In Stock
5% off MSRP $ 87.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 83.99 USD
Free Shipping
5% off MSRP
$ 87.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 83.99 USD
Free Shipping


Genuine BMW High Pressure Pipe -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F25 X3,F26 X4,F30,F34

Fits BMW Engines including:
N55

Show More Show Less
Packaged by Turner - Corporate Logo
T#:556734
Part#: N55TISKT
In Stock
$ 275.99 USD
Free Shipping
$ 275.99 USD
Free Shipping

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:5498500
Part#: 12137594937IGKT
In Stock
Sale - Save 23% $ 336.99

This product was last offered at the strikethrough price on
07-27-2026

$ 257.96 USD
Free Shipping
Sale - Save 23%
$ 336.99

This product was last offered at the strikethrough price on
07-27-2026

$ 257.96 USD
Free Shipping
If your BMW's mileage is getting up there, be sure to keep your ignition system in check. Whether you currently have a misfire or you're just doing preventative maintenance, this kit is perfect. The kit includes: 6 Delphi Coils with locks 6 Bosch spark plugs BMW spark plug service label for your records 1 packet of American Grease Stick dielectric grease The kit includes: 6 Bremi Coils with locks 6 Bosch spark plugs BMW spark plug service label for your records 1 packet of American Grease Stick dielectric grease
Show More Show Less


Bremmen Parts - Corporate Logo
T#:33746535
Part#: 11617559530
In Stock
Sale - Save 20% $ 42.99

This product was last offered at the strikethrough price on
05-03-2026

$ 34.26 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 42.99

This product was last offered at the strikethrough price on
05-03-2026

$ 34.26 USD
Free Shipping on orders $49 and up
Schwaben - Corporate Logo
T#:3543429
Part#: LCB444SCH
In Stock
Sale - Save 25% $ 56.99

This product was last offered at the strikethrough price on
05-03-2026

$ 42.74 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 56.99

This product was last offered at the strikethrough price on
05-03-2026

$ 42.74 USD
Free Shipping on orders $49 and up

BMW M57 Diesel Injection Pump Puller is an essential tool designed specifically for removing injectors from BMW M47 and M57 diesel engines. Engineered for precision and durability, this puller facilitates the efficient extraction of diesel injectors without causing damage to the engine components. It is a must-have for any professional mechanic or DIY enthusiast working on BMW diesel engines.

  • Efficient Extraction: Removes diesel injectors with ease, reducing labor time.
  • Precision Engineering: Designed specifically for BMW M47 and M57 diesel engines.
  • Durable Construction: Built to withstand the rigors of frequent use.
  • Protects Engine Components: Minimizes the risk of damage during injector removal.
Show More Show Less
Bav Auto Tools - Corporate Logo
T#:32450134
Part#: PHONEBORESCOPE
In Stock
Sale - Save 3% $ 58.99

This product was last offered at the strikethrough price on
05-03-2026

$ 57.22 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 58.99

This product was last offered at the strikethrough price on
05-03-2026

$ 57.22 USD
Free Shipping on orders $49 and up

The Borescope Inspection Camera offers 1920P HD resolution, a flexible 7.9mm probe, and a 16.4ft semi-rigid cable, making it ideal for inspecting hard-to-reach areas. Easily connect to IOS and Android devices, and use the IP67 waterproof probe for various applications, including automotive, plumbing, and home inspections.


Key Features:

  • 1920P HD Resolution: Capture clear images and high-quality video at 1920x1440 resolution.
  • Easy Connection: Connect quickly to IOS 9.0+ and Android 7+ devices via the 'SUP-ANESOK' app.
  • Semi-Rigid Cable: 16.4ft cable offers a mix of flexibility and rigidity for precise inspections.
  • Waterproof Probe: IP67-rated, capable of operating underwater up to 3.28 feet for 1 hour.
  • Wide Applications: Suitable for automotive, plumbing, and home inspections, with adjustable brightness for low-light environments.


Includes:

  • Borescope Camera
  • Android Adapter
  • Lightning Port Adapter
  • USB Type-C Connector
  • 16.4 ft. Semi-Rigid Cable
  • Magnet
  • Hook
  • Mirror
  • Protective Cap
  • Manual


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

Pierburg - Corporate Logo
T#:380843
Part#: 11658509323
In Stock
$ 190.99

This product was last offered at the strikethrough price on
02-23-2026

$ 189.99 USD
Free Shipping
$ 189.99 USD
Free Shipping
Turbo system not holding boost? This could be the cause

Bav Auto Tools - Corporate Logo
T#:580338
Part#: B8800006
In Stock
Sale - Save 25% $ 33.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 33.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.49 USD
Free Shipping on orders $49 and up
Used to easily remove your oil filter housing cap without damaging it.
Active Autowerke Power Pulley Kit - E9x M3
For vehicles with production date 2007-5/2008
Active Autowerke - Corporate Logo
T#:397285
Part#: 13-001
Ships in 3 Business Days
5% off MSRP $ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD
Free Shipping
5% off MSRP
$ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD
Free Shipping
Easy to install - reduces parasitic losses from belt driven auxiliary components. Engine crankshaft pulley remains the same, this modification simply unleashes untapped potential from your vehicle. Expect to see gains around 10 RWHP from your S65. All BMW power pulleys included, including alternator, water pump, and power steering pulleys.
Show More Show Less

Radium Engineering - Corporate Logo
T#:577808
Part#: 20-0373
In Stock at Vendor
$ 259.99 USD
Free Shipping
$ 259.99 USD
Free Shipping
Oil catch cans prevent elevated oil blow by caused by aggressive driving. The Radium Engineering catch can uses a closed loop system and is emissions and track legal, and by not venting to atmosphere avoids any oil smells from getting into the cabin. Kit includes Billet catch can Mounting bracket 10AN hose fittings and adapters 5/8" PCV hose Mounting hardware
Show More Show Less
Permatex - Corporate Logo
T#:3672391
Part#: 22058
In Stock at Vendor
$ 20.99 USD
Free Shipping on orders $49 and up
Protects electrical connections and wiring from salt, dirt and corrosion

NRW Design - Corporate Logo
T#:20584681
Part#: S65VCSBLK
Ships in 3 Business Days
$ 1,199.99 USD
Free Shipping on orders $49 and up
For S65 reliability and a refined engine bay appearance, the NRW Designs S65 Aluminum Valve Cover finished in Smooth Black is a smart investment.

URO Valve Cover Kit - E82 128i, E9X 328i, E60 528i, E70 X5 3.0si, E83...
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat! For 2007+ models with plastic valve cover
URO - Corporate Logo
T#:395230
Part#: 11127552281
Ships in 2 Business Days
$ 249.99 USD
Free Shipping
$ 249.99 USD
Free Shipping
All-in-one valve cover overhaul Preventative replacement saves time and trouble later on Includes new oil separator system Replace valve cover gaskets before a leak becomes worse Replace valve cover before it cracks For the 2007 model year BMW switched to a plastic valve cover on the N51 and N52 engines. As we have seen over time the plastic can crack which leads to oil leaks, vacuum leaks, poor running, and other issues. Unfortunately, it's not just the gasket that needs periodic replacement but the entire valve cover itself. This kit includes a new valve cover, gaskets, eccentric shaft seal, and hardware. The valve cover also incorporates the oil separator which is not a replaceable item on its own. So a complete valve cover replacement will tackle multiple problem areas at once. The valve cover is the same for N51 SULEV and N52 engines. Cracked Valve Cover. The plastic used for the N52 valve cover is thin and weak in certain spots. This makes it prone to hairline or larger cracks that will leak oil and cause vacuum leaks. You might also notice rough running, especially at idle. Often a technician will go looking for a failed ignition coil, spark plug, or failed vacuum hose on the engine. And without a fault code to assist in diagnosis this can often mean wasted time and money. A cracked valve cover is a new problem area that many techs don't think to check. Oil Separator/Crankcase Vent. BMW integrated the oil separator system into the valve cover on these later engines. An internal manifold creates a cyclone effect and centrifugal force separates vapor from the liquid oil. The liquid oil is supposed to drain through the valve cover and back to the oil pan while the remaining vapor is burned up during combustion. It's a very efficient and environmentally-friendly design with very few moving parts. Unfortunately it's not perfect and eventually the internal passageways will become clogged. This problem is made worse in cars that have short drive cycles, sit for long periods of time, do not have frequent oil changes, do not see regular runs to redline, and cars in freezing climates. If the engine never reaches optimal operating temp the oil remains in liquid form or becomes sludge. This is bad news for the entire engine, leading to fouled spark plugs, rough running and misfires and even premature failure of catalytic converters and oxygen sensors. Since the oil separator system in the valve cover is not available on its own, and cleaning it is nearly impossible, the complete replacement of the valve cover is the only option. Other oil vent tubes and vacuum hoses are also recommended to get replaced at the same time. Valve Cover Gaskets. As with any rubber part, failures occur when the rubber becomes dry and brittle. The pliable rubber no longer forms a seal between the cylinder head and valve cover where it will develop an oil leak. Valve cover gaskets that leak can allow oil to seep into the spark plug holes and contaminate ignition coil boots and plugs. That can lead to rough running and misfires. A new valve cover includes new gaskets. Eccentric Shaft Seal. The seal for the eccentric shaft sensor is a known spot for oil leaks. When the seal to the valve cover fails oil can end up in the sensor itself and ruin the sensor (an unecessary $300 expense). Usually a new seal (o-ring) will stop the leaks but sometimes the valve cover is at fault too. A new eccentric shaft seal is included. All new hardware is included to avoid re-using and over-tightening the original bolts (they have a very low torque rating). Replacement requires accessing the rear of the engine with a lot of the upper plastic shrouding removed. The vent hose on the valve cover should be replaced as it is almost always broken anyway (#11157559528). The metal fuel line must also be removed and disconnected from the fuel injectors. Professional installation is encouraged if you have never done this kind of work before. Serious DIY types should have a Bentley Service Manual to use which greatly explains the process. You may also want to combine this work with the oil filter housing gasket replacement. There is no maintenance or replacement interval for the N52 valve cover. However, we have seen cracks and other failures in the 50,000-90,000 mile range. Our best advice is to plan on a major top end overhaul around the 70-80,000 mile mark. There's no mechanical downside to replacing it as prevention and it will make the engine run better and last longer. This item fits the following BMWs: 2008-2012 E82 BMW 128i 2007-2011 E90 BMW 328i 328xi 328i xDrive - Sedan 2007-2012 E91 BMW 328i 328xi 328i xDrive - Wagon 2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe 2007-2013 E93 BMW 328i - Convertible 2008-2010 E60 BMW 528i 528xi 528i xDrive 2011 F10 BMW 528i 2007-2010 E83 BMW X3 3.0i X3 3.0si 2007-2008 E70 BMW X5 3.0si 2007-2008 E85 BMW Z4 3.0i Z4 3.0si 2009-2010 Z4 BMW Z4 sDrive30i
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:600097
Part#: N5455VACADAP-BK
In Stock
$ 59.99 USD
Free Shipping
$ 59.99 USD
Free Shipping
The Vacuum Boost Adapter from Vargas Turbos Tehcnologies is an easy way to get a boost source with out having to make irreversible changes to your intake manifold! These go inline to the throttle body and provide a full boost/vacuum signal from the manifold. These are perfect for running your PI off manifold pressure which is much more accurate than charge pipe, and they are also great for BOV running the proper size line without having to drill a hole in your manifold.
Show More Show Less
King - Corporate Logo
T#:26538337
Part#: CR224SV0.25
In Stock at Vendor
$ 42.99 USD
Free Shipping on orders $49 and up
Introducing King Connecting Rod Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. King Rod Bearings for BMW Engines come in sets of 2 (2 Upper and 2 Lower Bearing Shells) Suitable for 2 Con-Rods. The Upper and Lower bearing shells are comprised of a lead-free, Silver-based tri-metal material designed for extreme load applications. Engineered with meticulous attention to detail, King bearings are designed to exact standards to ensure optimal fitment and compatibility with BMW engines. Experience improved smoother engine operation with King Bearings.
Show More Show Less


MANLEY - Corporate Logo
T#:17073599
Part#: 646000C-6
In Stock at Vendor
8% off MSRP $ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,111.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,111.99 USD
Free Shipping on orders $49 and up

Upgrade your BMW N54B30 engine with the N54B30 32cc Platinum Series Dish Piston Set, featuring high-strength 2618 material for enhanced performance.

  • Specifically designed for BMW N54B30 engines
  • Platinum Series for superior strength
  • Offset wrist pin for quiet start-ups
  • Premium Chrome Moly and 9310 alloy wall pins included
  • Pressure balance groove for optimal functionality
  • Accommodates +1mm valve sizes
  • Premium Steel top rings with Napier seconds
  • Round wire locks included for secure installation
  • Recommended piston clearance of .0035" for precision

Elevate your BMW N54B30 engine's performance with this Platinum Series Dish Piston Set, ensuring durability, quiet start-ups, and precision functionality.

Show More Show Less
King - Corporate Logo
T#:597152
Part#: CR224SV
In Stock at Vendor
$ 78.99 USD
Free Shipping on orders $49 and up

BMW S65 S85 Connecting Rod Bearing Set of 2 Pairs provides exceptional performance and durability for BMW engines. Engineered by King Bearings, these connecting rod bearings are designed to meet the high demands of high-performance driving, ensuring reliable engine operation. Crafted from a lead-free, silver-based tri-metal material, these bearings offer superior load resistance and stability, making them ideal for both everyday driving and track use.

  • Enhanced Performance: Designed to handle high loads and extreme conditions, providing improved engine reliability and efficiency.
  • Superior Durability: Made from a lead-free, silver-based tri-metal material for exceptional wear resistance and longevity.
  • Precision Engineering: Meticulously crafted to exact specifications for optimal fitment and compatibility with BMW S65 and S85 engines.
  • Smooth Operation: Ensures smoother engine performance and reduced friction, enhancing overall driving experience.
  • High-Performance Ready: Perfect for both street and track applications, meeting the demands of high-performance driving.
Show More Show Less
Condor Speed Shop - Corporate Logo
T#:34784500
Part#: N52OILPANBAF
Ships in 1 Business Day
$ 89.99 USD
Free Shipping on orders $49 and up
The N52 Oil Pan Baffle Kit - E9x is the ultimate solution for BMW E9x series owners looking to improve oil control and protect their engine under high-performance driving conditions. This specially engineered baffle kit, designed for BMW models featuring the N52 engine, is ideal for reducing oil slosh and preventing oil starvation during aggressive driving. Manufactured by Condor Speed Shop, this baffle kit ensures that oil stays where it’s needed most, providing consistent lubrication even under extreme cornering forces. Benefits: • Enhanced Oil Control: Minimizes oil movement to maintain stable oil pressure during rapid acceleration, cornering, and braking. • Superior Engine Protection: Reduces the risk of oil starvation and protects vital engine components, particularly in performance or track conditions. • Track-Optimized Design: Built for E9x BMW models with the N52 engine, ideal for both street and track use. • Durable Construction: Crafted from robust materials that can endure high temperatures and provide long-lasting durability. • Simple Installation: Precision-fit design for the BMW E9x series makes the installation process straightforward and hassle-free. Whether you're a performance driver or simply want to safeguard your engine from potential damage, the N52 Oil Pan Baffle Kit - E9x by Condor Speed Shop is a top choice for enhancing engine reliability and longevity.
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:11497326
Part#: VTT-N54-DI-DELET
Ships in 1 Business Day
$ 339.99 USD
Free Shipping
$ 339.99 USD
Free Shipping
Looking to get rid of the troublesome and expensive DI injectors on your BMW N54 and move to PI only and a standalone? If so VTT has you covered with its new N54 PI delete kit. This kit allows you to SAFELY remove the DI injectors, install our delete fittings, and run PI only. We machined these deletes from 310 Stainless for extreme heat, and corrosion resistance, and include 3 hold downs. These DI deletes COMPLETELY get rid of all factory provisions, including the seal. If the seal is left intact with no fuel to cool the injector or delete it will quickly overheat and melt the delicate seal causing combustion gasses to escape the engine creating misfires, and worse possibly damaging your injector bore on the cylinder head. Our deletes are machined to be a press fit into the cylinder, and can be either cooled with liquid nitrogen, and dropped in, or tapped in with a hammer, and then held down with the included hold downs. We also include M6 tapped holes on the top of each one in case they need to be removed you can attach a slide hammer, and remove the delete. These are sold as a kit and come with the following 6 – 310 Stainless DI Delete fittings 3 – Hold down brackets​ Completetion of this kit will require the purchase of HPFP delete plate - ES# 4623950 PLEASE NOTE: THIS KIT REQUIRES EXTENSIVE MODIFICATIONS TO CONVERT YOUR ENGINE TO PI ONLY. THIS INCLUDES BUT IS NOT LIMITED TO A FULL PORT INJECTION SOLUTION, AND STAND-ALONE TO RUN THE PI SYSTEM. WE RECOMMEND THIS PNP SYSTEM USING THE MAXX ECU IT PROVIDES ALL YOU NEED TO GET UP AND RUNNING WITH PI ONLY ON THE TUNING SIDE OF THINGS – https://www.pnpecu.com/pnpecu-maxxecu-n54-pnp-kit-437-p.asp
Show More Show Less

CP Carrillo - Corporate Logo
T#:31291053
Part#: CPT-3307PVD
In Stock
$ 33.99 USD
Free Shipping on orders $49 and up

BMW N54 3.0L CP Piston Turbo Ring Set is engineered to enhance the performance and reliability of the BMW N54 engine. This set includes a 1.2mm top ring, a 1.2mm second ring, and a 2.0mm oil ring, all designed for optimal performance. The rings feature a 3.307 bore and are coated with PVD for use with the SC7700 turbocharger, ensuring superior durability and efficiency.

  • Precision Fit: The 1.2mm top and second rings, along with the 2.0mm oil ring, ensure a perfect fit and reliable sealing.
  • Enhanced Performance: Designed specifically for the BMW N54 engine, these rings contribute to improved engine performance and efficiency.
  • Durable Coating: PVD coating enhances durability and resistance to wear, making them ideal for high-performance applications.
  • Compatibility: Engineered for use with the SC7700 turbocharger, providing seamless integration and optimal performance.

This turbo ring set is a high-quality upgrade for those seeking to maximize the potential of their BMW N54 engine.

Show More Show Less
Elring Valve Stem Seal Kit - E60 E63 E64 E90 E92 E93
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Elring - Corporate Logo
T#:596449
Part#: 11340032548
In Stock
$ 36.26

This product was last offered at the strikethrough price on
07-29-2026

$ 33.99 USD
Free Shipping on orders $49 and up
$ 33.99 USD
Free Shipping on orders $49 and up

MANLEY - Corporate Logo
T#:17073607
Part#: 647005C-6
In Stock
8% off MSRP $ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,111.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,111.99 USD
Free Shipping on orders $49 and up

BMW N55 S55 37cc Platinum Series Dish Piston Set - 84.5mm Bore is designed for high-performance applications, providing exceptional strength and durability for BMW engines. Turner Motorsport offers this premium piston set to enhance engine reliability and efficiency.

  • High-Strength Material: Crafted from 2618 high-strength material for superior durability and performance.
  • Quiet Start-Ups: Offset wrist pin design minimizes noise during engine start-ups.
  • Premium Pins: Includes a .210” wall Premium Chrome Moly pin (Standard Series) or a .210” wall 9310 alloy pin (Extreme Duty Series) for added strength.
  • Pressure Balance Groove: Features a pressure balance groove to improve piston stability and efficiency.
  • Valve Accommodation: Designed to accommodate +1mm valve sizes for enhanced engine performance.
  • Top-Quality Rings: Comes with premium steel top rings, Napier seconds, and round wire locks for optimal sealing and reliability.
  • Recommended Clearance: Piston clearance of .0035” measured .850” from the bottom of the oil ring for precise fitment.
Show More Show Less
Braille Performance Intensity Carbon Lithium-ION Battery - i48CX - 10...
This item is classified as Hazardous Materials and requires special shipping and handling. We cannot ship this item out of the US or with priority shi
Braille - Corporate Logo
T#:558047
Part#: I48CX
Ships in 4 Business Days
$ 1,164.99 USD
Free Shipping on orders $49 and up
The ultra-lightweight, standard height I48CX lithium-ION battery from Braille Battery is a popular choice among BMW enthusiasts looking for a drop-in replacement battery that shaves off a ton of weight, 35 pounds in total! Thanks to the Group 48 design of this battery, no modifications are needed for installation. This is perfect for anyone looking to drive their car both on and off of the track, without any negative side effects, and wants a battery with a 10-15 year life span!
Show More Show Less

NRW Design - Corporate Logo
T#:42436689
Part#: S65CCSK-2
Ships in 3 Business Days
$ 555.00 USD
Free Shipping on orders $49 and up
The ultimate choice for enthusiasts looking to protect their investment, extend engine life, and maintain top-tier performance

Genuine BMW - Corporate Logo
T#:32906
Part#: 11237574827
In Stock
6% off MSRP $ 104.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 98.99 USD
Free Shipping
6% off MSRP
$ 104.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 98.99 USD
Free Shipping


Genuine BMW Hub -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N55,S55

Show More Show Less
Genuine BMW - Corporate Logo
T#:44920
Part#: 16127172162
Ships in 3 Business Days
6% off MSRP $ 110.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 103.99 USD
Free Shipping
6% off MSRP
$ 110.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 103.99 USD
Free Shipping


Genuine BMW Fuel Feed Line -
This item fits the following BMW Chassis:
E90,E92,E93

Fits BMW Engines including:
N20,N52,N52N,N54,N54T,N55

Genuine BMW - Corporate Logo
T#:21267
Part#: 61129125036
In Stock
3% off MSRP $ 509.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 493.99 USD
Free Shipping
3% off MSRP
$ 509.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 493.99 USD
Free Shipping


Genuine BMW Positive Battery Lead -
This item fits the following BMW Chassis:
E90,E92,E93



Genuine BMW - Corporate Logo
T#:14984
Part#: 13627792203
Ships in 1-2 days
9% off MSRP $ 122.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD
Free Shipping
9% off MSRP
$ 122.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD
Free Shipping
This is the Genuine BMW intake air temperature sensor that is mounted in the intake manifold for E9x M3 with the S65 V8 engine.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2006-2011 E90 BMW M3 - Sedan
2007-2013 E92 BMW M3 - Coupe
2007-2013 E93 BMW M3 - Convertible
Show More Show Less
Genuine BMW - Corporate Logo
T#:174265
Part#: 11217627035
Ships in 1-2 days
5% off MSRP $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD
Free Shipping on orders $49 and up
5% off MSRP
$ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD
Free Shipping on orders $49 and up
This is a genuine BMW bearing shell for the crankshaft.