Shock Mount Kits for BMW 3 Series E90 (2006-2011)

Clear BMW chassis

Please ensure your correct model is selected

If you are replacing your shocks, be sure to change the mount as well. This simple step will not only increase the life of your new shocks, but will help to restore lost comfort and agility, As factory bushings age, the will begin to crack and split. Turner Motorsport carries Genuine BMW mounts as well as high quality aftermarket alternatives.

Sub-Categories

Sort By:
Turner Motorsport Spherical Rear Upper Shock Mounts - E9x E8x non-M
Turner Motorsport Spherical Rear Upper Shock Mounts - E9x E8x non-M ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Improve shock efficiency and increase shock travel on lowered BMWs!
Turner Motorsport - Corporate Logo
T#:556649
Part#: 010019TMS01
In Stock
$ 352.99 USD
Free Shipping
Add to Wish List
$ 352.99 USD
Free Shipping
Add to Wish List
No matter whether your E9x or E8x is N52, N54, or N55 powered, your rear upper shock mounts (33506771738) will fail. We set out to design the ultimate performance spherical monoball rear upper shock mount, and we believe we have exactly that. Our monoball rear upper shock mounts eliminate any unwanted deflection, maximizing shock efficiency and performance - this means full body shock body articulation, reducing side loading and improving shock wear. Our Turner Motorsport rear upper shock mounts also offer flexibility in shock position - our kit enables you to either raise your shock position by 7.5mm or lower it by 4.5mm. We recommend running the raised 7.5mm for increased shock travel on lowered vehicles. On the other hand, if you're looking to retain bump stops, washers, and shock boots, you can run the 4.5mm lowered shock position. NOTE: You may experience a slight increase in NVH when using our monoball rear upper shock mounts, but we think it is justified by the eliminated deflection and setup flexibility offered by this kit. Design features: Billet CNC 6061-T6 aluminum, type III anodized for exceptional durability and corrosion resistance Teflon lined spherical bearing Self-lubricating PTFE liners are chemically bonded to the inner diameter of the race to offer a very high load-carrying capacity with greatly increased dynamic wear characteristics. Bearing inserts are CNC machined 1144 steel, heat treated and melonite coated Maximize ball articulation while offering exceptional durability and corrosion resistance Static Axial Load Rating: 10,800 lbs. Rod End Misalign Angle: 6 degrees Fully rebuildable Made in USA!
Show More Show Less
Shock and Strut Installation Kit - E9X 325xi 328xi 330xi 335xi
Shock and Strut Installation Kit - E9X 325xi 328xi 330xi 335xi ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:554760
Part#: E9XXISIKT
In Stock at Vendor
Sale - Save 1% $ 366.99

This product was last offered at the strikethrough price on
05-03-2026

$ 362.24 USD
Free Shipping
Add to Wish List
Sale - Save 1%
$ 366.99

This product was last offered at the strikethrough price on
05-03-2026

$ 362.24 USD
Free Shipping
Add to Wish List

Replacing your struts and shocks? Don't forget the bushings! The rubber mounts for the shocks will go bad over time, especially if you drive hard or the roads are particularly rough. The shock mounts locate the front struts and rear shocks to the car - providing a quiet and vibration-free buffer between the road and the cabin. Shock mounts and bushings can wear out just like any other rubber part on the car. This leads to more noise and harshness reaching the chassis and may complicate your new suspension install. When installing new shocks, that is the perfect time to also replace the mounts. There is no additional time to install them, no special tools required, and doesn't take any extra time! If you re-use the original mounts you have the risk of them failing before your next shock replacement, doubling your labor costs. 

This item fits the following BMWs: 
2006-2012 E9X BMW All xi models - 325xi 328xi 330xi 335xi

Show More Show Less
Genuine BMW Rear Upper And Lower Shock Mount Kit
Genuine BMW Rear Upper And Lower Shock Mount Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:376854
Part#: 33526768544KT
Ships in 3 Business Days
$ 382.99 USD
Free Shipping
Add to Wish List
$ 382.99 USD
Free Shipping
Add to Wish List
3-series Strut/Shock (non-EDC) Mount Kit - E90 M3, E92 M3, E93 M3
3-series Strut/Shock (non-EDC) Mount Kit - E90 M3, E92 M3, E93 M3 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:11950
Part#: E9XM3MOUNTKIT
In Stock
$ 649.30 USD
Free Shipping
Add to Wish List
$ 649.30 USD
Free Shipping
Add to Wish List
Any change of your M3 struts and shocks should include new mounts. Installing new bushings and mounts is very easy when changing the shocks - there's no additional time or no special tools required! If you re-use the original mounts you have the risk of them failing before your next shock replacement, doubling your labor costs.

The shock mounts locate the front struts and rear shocks to the car - providing a quiet and vibration-free buffer between the road and the cabin. Shock mounts and bushings can wear out just like any other rubber part on the car. This leads to more noise and harshness reaching the chassis and may complicate your new suspension install.

This package is for cars NOT equipped with the EDC suspension.

Included in the E9X M3 Mount Kit:
  • front upper strut mounts with bearings (also known as a guide support), 31302283650
  • A. rear upper-top shock mounts, 33506771737
  • B. rear upper-middle shock mounts, 33506767010
  • C. rear upper-bottom shock mounts, 33506771738
  • D. rear upper supporting cup, 33526764418 (sits over bumpstop)
    Buy as a package and save $!!

    This item fits the following BMWs without EDC suspension
    2008-2012 E90 BMW M3 - Sedan
    2008-2012 E92 BMW M3 - Coupe
    2008-2012 E93 BMW M3 - Convertible
    • Show More Show Less
    3-series Strut/Shock (EDC) Mount Kit - E90 M3, E92 M3, E93 M3
    3-series Strut/Shock (EDC) Mount Kit - E90 M3, E92 M3, E93 M3 ...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Genuine BMW - Corporate Logo
    T#:11952
    Part#: E9XM3EDCMOUNTKIT
    Ships in 3 Business Days
    $ 740.99 USD
    Free Shipping
    Add to Wish List
    $ 740.99 USD
    Free Shipping
    Add to Wish List
    Any change of your M3 struts and shocks should include new mounts. Installing new bushings and mounts is very easy when changing the shocks - there's no additional time or no special tools required! If you re-use the original mounts you have the risk of them failing before your next shock replacement, doubling your labor costs.

    The shock mounts locate the front struts and rear shocks to the car - providing a quiet and vibration-free buffer between the road and the cabin. Shock mounts and bushings can wear out just like any other rubber part on the car. This leads to more noise and harshness reaching the chassis and may complicate your new suspension install.

    This package is for cars WITH the EDC suspension.

    Included in the E9X M3 Mount Kit:
  • front upper strut mounts with bearings (also known as a guide support), 31302283650
  • A. rear upper-top shock mounts, 33502283519
  • B. rear upper-middle shock mounts, 33506767010
  • C. rear upper-bottom shock mounts, 33502283518
  • D. rear upper supporting cup, 33522283439 (sits over bumpstop)
    Buy as a package and save $!!

    This item fits the following BMWs equipped with EDC suspension
    2008-2012 E90 BMW M3 - Sedan
    2008-2012 E92 BMW M3 - Coupe
    2008-2012 E93 BMW M3 - Convertible
    • Show More Show Less
    Genuine BMW Rear Spindle Assembly - Left - E82 1 M Coupe E90 E92 E93 M3
    Genuine BMW Rear Spindle Assembly - Left - E82 1 M Coupe E90 E92 E93 ...
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Genuine BMW - Corporate Logo
    T#:59895
    Part#: 33302283541
    Ships in 6 Business Days
    3% off MSRP $ 1,077.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 1,050.99 USD
    Free Shipping
    Add to Wish List
    3% off MSRP
    $ 1,077.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 1,050.99 USD
    Free Shipping
    Add to Wish List


    Genuine BMW Wheel Carrier, Rear Left
    This item fits the following BMW Chassis:
    E82 1M Coupe,E82,E90,E92,E93

    Select Vehicle

    BMW Mini
    Clear Vehicle

    Purpose

    Category

    Brand

    Price

    $
    $

    Special Offers

    Shipping