Turner Motorsport for BMW 3 Series E90 (2006-2011)

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Mirror Chrome Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Rubber engine and transmission mounts for a street car and solid aluminum for the track, right? Well, it's not that straightforward anymore.

Stock rubber fluid-filled mounts are designed to be soft and comfortable, limiting the NVH (noise, vibration, and harshness) felt by the driver. The drawback inherent with a conventional design is driveline deflection, making it more difficult to put the power to the wheels, as well as making a money-shift or miss-shift more likely as they age. Solid mounts are exactly the opposite of this - they permit tons of NVH while offering zero deflection, making these a must have for track-driven vehicles looking to capitalize on every ounce of performance available. Enthusiasts looking to find the best of both worlds often look to polyurethane engine mounts - and many are disappointed with other designs on the market. Seeking a mount that offers a positive connection yet doesn't deform, fail, or rattle the fillings out of their mouths is frequently a lost cause.

Until now. 

We engineered these mounts with these very concerns in mind. We know if a soft mount offers a sloppy connection it doesn't work on the track, and a solid mount isn't acceptable as a daily driver (for most!) and set out to engineer a mount that would meet the needs for both. At the core of our enclosed design is a partially-constrained, multi-piece polyurethane bushing with precisely-set preload. This architecture absorbs and disperses resonant engine frequencies as opposed to amplifying them (like some other designs do), which results in a positive-connection, enthusiast-feel mount with the vibration. Understanding that heat is a concern for the passenger side mount's close proximity to the exhaust, we utilize a PEEK thermal insulation plate to greatly reduce heat transfer to the polyurethane, making heat a non-issue for these mounts. 

We offer two durometers, with both densities offering similar "positive connection" feeling. 60A is slightly softer and offers more of a stock feel, while 80A delivers a little more engine "feel" while under acceleration. 

Product features and benefits:

• Crisper throttle response, positive shifter location, direct power transfer
• High quality polyurethane offered in both 60A & 80A durometers (rebuildable, too)
• Resistant to water, ozone, and chemicals, maintaining its resiliency and elasticity longer than conventional rubber.
• Precision machined billet 6061-T6 aluminum housing, black anodized for durability and corrosion resistance. Grade 10.9 stud - fear not, big turbo owners.
• Thermal isolation spacer on the hot side to resist heat transfer into the poly
• Engineered in-house and made in America

This item fits the following BMWs:
2008-2013 E82 E88 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi 335d 335i 335xi - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi 335i 335is 335xi - Coupe
2007-2013 E93 BMW 328i 335i 335is - Convertible
2009-2016 E89 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

With the heightened popularity of the Turner E9x exhaust, we do not want to limit your choices when it comes to appearance. Pair this ultra lightweight, exotic sounding exhaust with your choice of exhaust tip! Our Turner Motorsport E9X M3 (S65) Titanium Valved Axle-back exhaust system is here to improve your driving experience with hearty exhaust notes and a noticeable bump in performance. With the muffler valves closed, this exhaust is both tame and fine tuned. Nobody will suspect your car even has an aftermarket exhaust system, it will sound similar to the factory system but with the perfect hint of exotic character. When you open up the valves, using the supplied valve controller, this exhaust transforms your car into the exotic beast that it is!

Now, we get it, not everyone can, or wants to delete their factory cats. Whether it be emissions testing or a check engine light, the smell of unfiltered exhaust, the very aggressive sound, or warranty reasons. Whatever the reason, We've got you covered! This exhaust setup leaves all 4 factory cats in place, making it 100% emissions legal for everyone.

This exhaust sports Mandrel bent dual 2.5” Ti22 pipes, with exhaust gases flowing through efficient piping to High flow, valved, Ti22 mufflers. Designed to mount with the factory exhaust hangers, this exhaust is a bolt-on replacement for the OE version. To help reduce the time you spend under the car installing the system, Accuseal slip-fit joints are included to make fitment as easy as possible. The Turner Motorsport full exhaust system includes a High flow, valved,Ti22 muffler and is available as an Axle Back, Cat-back system, as well as a full Turbo back system.

Give your M3 the dual-purpose exhaust system that satisfies your need for sound while having the ability to drive through the neighborhood at night with the Turner Motorsport E9X M3 full exhaust system!

Kit Includes:

Turner Axle back Exhaust with X pipe
Turner Adapter pipes for Factory Mid Pipes
Turner Muffler Valve Controller Kit
Optional 2.5" to 3.5" Exhaust Tips
Features:

Mandrel bent dual 2.5” Ti22 pipe with brushed finish
High flow, valved, titanium mufflers
Accuseal slip fit joints for easy fitment
Utilizes factory exhaust hangers

There are a few reason having a catch can is an upgrade for a vehicle, from a separator system that no longer works to one that was never there. Modern day emissions regulations require the use of a closed crankcase ventilation (PCV) system to recirculate combustion blow-by gases from the crankcase back in to the intake to be burned.  Unfortunately, these blow by gases contain water vapor (which is a byproduct of combustion) and pick up oil mist from and the windage cloud and cam lubrication system as they travel through the crank case.  Due to less than 100% effective air/oil separation in the stock PCV system, some oil mist and water vapor gets carried back to the intake tract and over time cause oil deposits and carbon buildup in the intake manifold, intake ports, and on the back of intake valves.  All will eventually lead to poor performance and reduced fuel economy, and the presence oil mist can in the intake charge even increase the risk of engine damaging detonation. 

With direct injected engines this problem becomes more prevalent, and the N54 in your 135i or 335i is no exception.  We're seeing a lot of N54 powered cars with drivability and performance issues due to significant carbon buildup in the intake ports and backs of intake valves.  The “factory fix” is a walnut blasting service that commonly needs performed every 30,000 to 70,000 miles.  Don't be part of this statistic!  Our shop recommends an oil catch can be installed in-line in the PCV system to help reduce the build-up of performance robbing deposits and greatly reduce the need for costly walnut blasting service and related repairs in the future.

​ The catch can utilizes a strategically designed 4 chamber baffle plate system engineered to create multiple changes in the direction of airflow to cause oil droplets to fall out of suspension, maximizing the efficiency of the PCV air/oil separation.  A dipstick is integrated into the cap so you can monitor the oil level, and the can is easily serviced.  At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil.  The Turner Motorsport Oil Catch Can is CNC machined from billet 6061-T6 aluminum and with a stealthy black anodized finish for lasting durability and appearance, and includes everything needed for an OEM-like fully reversible installation. Another feature the Turner catch can has is the ability to add on a drain kit so you no longer have to fumble around getting the fill can out of a tight space. The drain can be run down to the belly pan of your car so draining can be done at the same time you change your oil or anytime in between.

*Click here for catch can instructions*

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton O-Ring
• 8oz reservoir
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Optional use drain hole - drain kit included!
• Passenger side mounting kit - Designed specifically for your N54!

Oftentimes, the first thing you will notice about your manual BMW is that the stock shifter throws are miles and miles long. We developed our short shifter kit as a solve for this common complaint about manual transmission BMWs. Our new short shifter kits are the culmination of years of research and development - we went back to the drawing board several times throughout the design process, in efforts to release a product that really stood out from the rest of the short shifters on the BMW market. We set out to design the perfect shift kit for your BMW. Now we realize perfect is a subjective term, so we gave our short shifter a wide range of height and throw adjustability. This wide range of adjustability allows you to easily make adjustments from the cabin of your BMW by just removing your shifter boot and using small hex head keys.

We made our short shifter for all of you. The weekend warriors, the trackday monsters, and even the daily drivers. We wanted to make something that made sense for any BMW enthusiast. For those who want to drive your car to the track, drive some hotlaps, and then drive back home, we developed a rally lever extension. Our rally lever extension allows you to keep your hands close to the steering wheel through shifts, in efforts to quicken shifts and reaction times on the track. The rally lever comes off and on in seconds with the unique locking design we engineered. After your track day win, you can easily swap back to the short lever for more comfortable daily driving.

Installation of this kit is one of the easiest to take on compared to the competition - our custom bearing cup allows for easy installation from inside of the car (on applications that use the stock shifter arm). 

*Click HERE for the instillation PDF!

Performance features

• Ultra crisp shifter feel
• Adjustable between a conservative short throw to ultra short throw
• Quick, precise shifting
• More engaging driving experience

Easy installation and swap out​

• Bearing cup allows for easy installation from inside of the car (on applications that use the stock shifter arm).
• “Quick Change” height adjustable upper shift lever design allows for quick swapping between optional “OE” style and “Rally Style” upper shift levers.

Adjustments

• Independently adjustable knob height
  • 22mm adjustment range to fine tune shifter throw and feel.
  • Note: knob height also affects throw reduction to some degree
• Independently adjustable shifter throw
  • Adjustable by raising and lowering the lower lever position relative to the pivot ball.
  • Note: ball position also affects knob height by ~10mm range.
• Combined total throw adjustment range
  • ​24 to 45% reduction in throw over stock E90 M3 shifter.
• Throw adjustment can be done in the car without removing the shifter
  • Throw adjustment is accomplished by loosening set screw in shifter ball and rotating the ball within the cap using a couple of simple tools. 

Design Features

• Lower Shifter Assembly
  • CNC machined from 4140 chromoly steel and melonite coated for superior strength and exceptional durability and corrosion resistance.
  • Shifter ball CNC machined from 304 stainless steel, finely polished for smooth operation and bushing wear resistance.
  • Ball socket shifter bushings are precision machined from Nylatron® NSM.
    • self-lubricating and offers better wear resistance and impact resistance than other “premium” bearing grade plastics.  
    • Provides a positive shifter feel that never fades because of worn out bearings or bushings.
    • Precision tolerance fitment in the bearing cup eliminates unwanted ball socket movement.
  • Lower selector rod bushings precision machined from Nylatron® NSM
    • Precision fit tolerance on the selector rod to eliminate shifter linkage play.
    • Provides the ultimate in low friction, self-lubrication, wear resistance and impact resistance compared to other “premium” bearing grade plastics.
  • Lower shift arm has an adjustment range of 10mm to dial in the throw and feel of your shifter.
    • Lower shift lever is locked in place by tightening provided set screw in the stainless steel ball.

• Rally Upper Shift Lever
  • Compatible with stock shift boot fits nicely into the machined groove at the bottom of the lever to maintain a clean look in the interior.
  • Machined from 6061-T6 aluminum and type II anodized for exceptional durability and corrosion resistance.
    • Available in either black or clear anodize to match your vehicle’s interior.
  • Rally shift knob is machined from black delrin.
    • Unlike aluminum, delrin will not hold heat so on those hot days you won’t have to worry about burning your hand on a knob that’s been baking in the sun.  
    • Shift knob is threaded onto the end of the shift lever utilizing a standard ⅜-16 thread to allow for easy removal and attachment of your favorite beer tap or other accessory.
  • “Quick Change” height adjustable upper shift lever design allows for quick swapping between optional “OE” style and “Rally Style” upper shift levers.
    • 22mm adjustment range to fine tune shifter throw and feel.

• Standard Shift Lever
  • Compatible with OE BMW shift knobs or aftermarket shift knobs.
  • CNC machined from billet 6061-T6 aluminum and type II black anodized for exceptional durability and corrosion resistance.
  • “Quick Change” height adjustable upper shift lever design allows for quick swapping between optional “OE” style and “Rally Style” upper shift levers.
    • 22mm adjustment range to fine tune shifter throw and feel.

• Shifter Bearing Cup Assembly
  • CNC machined from billet 6061-T6 aluminum and type II blue anodized for exceptional durability and corrosion resistance.
  • Shifter cup encapsulates shifter components allowing for easy installation from inside of the car.
    • Bushings, lower shifter assembly, spring, retaining washer and snap ring can be easily installed inside the cup before installing in vehicle.
    • Cup installs into OE shifter arm with supplied clamp and socket head cap screws.
      • Installation can be done from inside the car without having to remove the OE shifter arm to install screws from the side.
  • Shifter bushings and cup are machined to tight tolerances to eliminate slop or play in the shifter assembly for a positive shifter feel.

This item fits the following BMWs:
2006 E90 BMW 330i - Sedan