Turner Motorsport for BMW 3 Series E90 (2006-2011)

Over 13 CFM more airflow than factory intake plenum! Beautiful Carbon Fiber construction with a roaring induction sound!

At Turner Motorsport, all our Carbon Fiber Intake Systems are top-of-the-line custom-engineered products that we developed in house. Our engineers took it upon themselves to design a prettier, cost effective Carbon Fiber Intake Plenum for S65 owners to compliment our E9x Carbon Fiber Intake System while retaining OEM features. Our S65 Carbon Intake Plenum is no different. Our Carbon Fiber Intakes start with a 3D scan of the factory intake and engine bay. Our Engineers use these 3D images of the chassis to design the intake plenum in SolidWorks modeling software. Using a Flow Bench, the Intake Plenum is then airflow tested against the factory intake, to ensure optimal airflow improvement against stock. The final product is a beautiful and functional Carbon Fiber Intake Plenum, CAD designed for perfect integration with the OEM inlet ducting and stock mounting locations. Our Carbon fiber Intake trumpets flow an average of 13 CFM over the stock BMW intake.

Our E9X M3 S65 Carbon Fiber Intake Plenum is made from 100% high grade prepreg 2x2 twill weave carbon including the internal trumpets, this plenum replaces the OEM plastic plenum allowing the naturally aspirated BMW V8 engine to generate more inductions sounds taking the driving experience of the M3 to a whole new level. The raw V8 rumble gives the M3 an almost CSL like sound and is truly an intoxicating experience. We went through several iterations using different carbon thicknesses to fine tune the sound and the resulting plenum generates an almost unbelievable induction volume and tone.

Our Carbon Fiber Intake Plenum can be used with the OEM airbox or any aftermarket intake system. Paired with our E9X M3 intake system, you're sure to upgrade the look and sound of your S65 engine.

Design Features and Benefits:

CAD designed Intake System for perfect integration with the OEM connections and stock mounting locations.
Carbon intake is manufactured using 2X2 twill weave carbon fiber for a great look in the engine bay.
Plenum is protected by a gloss finish clear coat for UV protection.
Uses OE intake temp sensor and hose locations
Provides same fitment as OE intake
Performance:

Carbon fiber Intake trumpets flow an average of 13 CFM over the stock BMW intake.
\

Upgrade the security of your BMW wheels with the BMW Conical Seat Locking Wheel Bolt Kit. This kit provides enhanced protection against wheel theft while adding a stylish touch to your vehicle. Engineered specifically for BMW models, these locking wheel bolts offer a precise fit and reliable performance. Ensure peace of mind and safeguard your investment with this premium locking wheel bolt kit.

• Enhanced protection against wheel theft
• Stylish addition to your BMW
• Engineered for precise fit and reliable performance
• Safeguards your investment

Rubber engine and transmission mounts for a street car and solid aluminum for the track, right? Well, it's not that straightforward anymore.

Stock rubber fluid-filled mounts are designed to be soft and comfortable, limiting the NVH (noise, vibration, and harshness) felt by the driver. The drawback inherent with a conventional design is driveline deflection, making it more difficult to put the power to the wheels, as well as making a money-shift or miss-shift more likely as they age. Solid mounts are exactly the opposite of this - they permit tons of NVH while offering zero deflection, making these a must have for track-driven vehicles looking to capitalize on every ounce of performance available. Enthusiasts looking to find the best of both worlds often look to polyurethane engine mounts - and many are disappointed with other designs on the market. Seeking a mount that offers a positive connection yet doesn't deform, fail, or rattle the fillings out of their mouths is frequently a lost cause.

Until now. 

We engineered these mounts with these very concerns in mind. We know if a soft mount offers a sloppy connection it doesn't work on the track, and a solid mount isn't acceptable as a daily driver (for most!) and set out to engineer a mount that would meet the needs for both. At the core of our enclosed design is a partially-constrained, multi-piece polyurethane bushing with precisely-set preload. This architecture absorbs and disperses resonant engine frequencies as opposed to amplifying them (like some other designs do), which results in a positive-connection, enthusiast-feel mount with the vibration. Understanding that heat is a concern for the passenger side mount's close proximity to the exhaust, we utilize a PEEK thermal insulation plate to greatly reduce heat transfer to the polyurethane, making heat a non-issue for these mounts. 

We offer two durometers, with both densities offering similar "positive connection" feeling. 60A is slightly softer and offers more of a stock feel, while 80A delivers a little more engine "feel" while under acceleration. 

Product features and benefits:

• Crisper throttle response, positive shifter location, direct power transfer
• High quality polyurethane offered in both 60A & 80A durometers (rebuildable, too)
• Resistant to water, ozone, and chemicals, maintaining its resiliency and elasticity longer than conventional rubber.
• Precision machined billet 6061-T6 aluminum housing, black anodized for durability and corrosion resistance. Grade 10.9 stud - fear not, big turbo owners.
• Thermal isolation spacer on the hot side to resist heat transfer into the poly
• Engineered in-house and made in America

This item fits the following BMWs:
2008-2013 E82 E88 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi 335d 335i 335xi - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi 335i 335is 335xi - Coupe
2007-2013 E93 BMW 328i 335i 335is - Convertible
2009-2016 E89 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Turner Motorsport Polo shirts are perfect to show your passion for the race team when you're not in the garage. Pick one up today!

Don't see your size available? Give us a call at 1.800.280.6966 - we have you covered.

New to our line of exceptional performance upgrades for your BMW, the Turner Motorsport E9X M3 (S65) Titanium Valved Axle-back exhaust system is here to improve your driving experience with hearty exhaust notes and a noticeable bump in performance. With the muffler valves closed, this exhaust is both tame and fine tuned. Nobody will suspect your car even has an aftermarket exhaust system, it will sound similar to the factory system but with the perfect hint of exotic character. When you open up the valves, using the supplied valve controller, this exhaust transforms your car into the exotic beast that it is!

Now, we get it, not everyone can, or wants to delete their factory cats. Whether it be emissions testing or a check engine light, the smell of unfiltered exhaust, the very aggressive sound, or warranty reasons. Whatever the reason, We've got you covered! This exhaust setup leaves all 4 factory cats in place, making it 100% emissions legal for everyone.

This exhaust sports Mandrel bent dual 2.5” Ti22 pipes, with exhaust gases flowing through efficient piping to High flow, valved, Ti22 mufflers. Designed to mount with the factory exhaust hangers, this exhaust is a bolt-on replacement for the OE version. To help reduce the time you spend under the car installing the system, Accuseal slip-fit joints are included to make fitment as easy as possible. The Turner Motorsport full exhaust system includes a High flow, valved,Ti22 muffler and is available as an Axle Back, Cat-back system, as well as a full Turbo back system.

Give your M3 the dual-purpose exhaust system that satisfies your need for sound while having the ability to drive through the neighborhood at night with the Turner Motorsport E9X M3 full exhaust system!

Kit Includes:

Turner Axle back Exhaust with X pipe
Turner Adapter pipes for Factory Mid Pipes
Turner Muffler Valve Controller Kit
Turner Engraved Exhaust Tips
Features:

Mandrel bent dual 2.5” Ti22 pipe with brushed finish
Turner Engraved Brushed exhaust tips
High flow, valved, stainless steel mufflers
Accuseal slip fit joints for easy fitment
Utilizes factory exhaust hangers

Oftentimes, the first thing you will notice about your manual BMW is that the stock shifter throws are miles and miles long. We developed our short shifter kit as a solve for this common complaint about manual transmission BMWs. Our new short shifter kits are the culmination of years of research and development - we went back to the drawing board several times throughout the design process, in efforts to release a product that really stood out from the rest of the short shifters on the BMW market. We set out to design the perfect shift kit for your BMW. Now we realize perfect is a subjective term, so we gave our short shifter a wide range of height and throw adjustability. This wide range of adjustability allows you to easily make adjustments from the cabin of your BMW by just removing your shifter boot and using small hex head keys.

We made our short shifter for all of you. The weekend warriors, the trackday monsters, and even the daily drivers. We wanted to make something that made sense for any BMW enthusiast. For those who want to drive your car to the track, drive some hotlaps, and then drive back home, we developed a rally lever extension. Our rally lever extension allows you to keep your hands close to the steering wheel through shifts, in efforts to quicken shifts and reaction times on the track. The rally lever comes off and on in seconds with the unique locking design we engineered. After your track day win, you can easily swap back to the short lever for more comfortable daily driving.

Installation of this kit is one of the easiest to take on compared to the competition - our custom bearing cup allows for easy installation from inside of the car (on applications that use the stock shifter arm). 

*Click HERE for the instillation PDF!

Performance features

• Ultra crisp shifter feel
• Adjustable between a conservative short throw to ultra short throw
• Quick, precise shifting
• More engaging driving experience

Easy installation and swap out​

• Bearing cup allows for easy installation from inside of the car (on applications that use the stock shifter arm).
• “Quick Change” height adjustable upper shift lever design allows for quick swapping between optional “OE” style and “Rally Style” upper shift levers.

Adjustments

• Independently adjustable knob height
  • 22mm adjustment range to fine tune shifter throw and feel.
  • Note: knob height also affects throw reduction to some degree
• Independently adjustable shifter throw
  • Adjustable by raising and lowering the lower lever position relative to the pivot ball.
  • Note: ball position also affects knob height by ~10mm range.
• Combined total throw adjustment range
  • ​24 to 45% reduction in throw over stock E90 M3 shifter.
• Throw adjustment can be done in the car without removing the shifter
  • Throw adjustment is accomplished by loosening set screw in shifter ball and rotating the ball within the cap using a couple of simple tools. 

Design Features

• Lower Shifter Assembly
  • CNC machined from 4140 chromoly steel and melonite coated for superior strength and exceptional durability and corrosion resistance.
  • Shifter ball CNC machined from 304 stainless steel, finely polished for smooth operation and bushing wear resistance.
  • Ball socket shifter bushings are precision machined from Nylatron® NSM.
    • self-lubricating and offers better wear resistance and impact resistance than other “premium” bearing grade plastics.  
    • Provides a positive shifter feel that never fades because of worn out bearings or bushings.
    • Precision tolerance fitment in the bearing cup eliminates unwanted ball socket movement.
  • Lower selector rod bushings precision machined from Nylatron® NSM
    • Precision fit tolerance on the selector rod to eliminate shifter linkage play.
    • Provides the ultimate in low friction, self-lubrication, wear resistance and impact resistance compared to other “premium” bearing grade plastics.
  • Lower shift arm has an adjustment range of 10mm to dial in the throw and feel of your shifter.
    • Lower shift lever is locked in place by tightening provided set screw in the stainless steel ball.

• Rally Upper Shift Lever
  • Compatible with stock shift boot fits nicely into the machined groove at the bottom of the lever to maintain a clean look in the interior.
  • Machined from 6061-T6 aluminum and type II anodized for exceptional durability and corrosion resistance.
    • Available in either black or clear anodize to match your vehicle’s interior.
  • Rally shift knob is machined from black delrin.
    • Unlike aluminum, delrin will not hold heat so on those hot days you won’t have to worry about burning your hand on a knob that’s been baking in the sun.  
    • Shift knob is threaded onto the end of the shift lever utilizing a standard ⅜-16 thread to allow for easy removal and attachment of your favorite beer tap or other accessory.
  • “Quick Change” height adjustable upper shift lever design allows for quick swapping between optional “OE” style and “Rally Style” upper shift levers.
    • 22mm adjustment range to fine tune shifter throw and feel.

• Standard Shift Lever
  • Compatible with OE BMW shift knobs or aftermarket shift knobs.
  • CNC machined from billet 6061-T6 aluminum and type II black anodized for exceptional durability and corrosion resistance.
  • “Quick Change” height adjustable upper shift lever design allows for quick swapping between optional “OE” style and “Rally Style” upper shift levers.
    • 22mm adjustment range to fine tune shifter throw and feel.

• Shifter Bearing Cup Assembly
  • CNC machined from billet 6061-T6 aluminum and type II blue anodized for exceptional durability and corrosion resistance.
  • Shifter cup encapsulates shifter components allowing for easy installation from inside of the car.
    • Bushings, lower shifter assembly, spring, retaining washer and snap ring can be easily installed inside the cup before installing in vehicle.
    • Cup installs into OE shifter arm with supplied clamp and socket head cap screws.
      • Installation can be done from inside the car without having to remove the OE shifter arm to install screws from the side.
  • Shifter bushings and cup are machined to tight tolerances to eliminate slop or play in the shifter assembly for a positive shifter feel.

This item fits the following BMWs:
2006 E90 BMW 330i - Sedan

If you're installing racing rear shocks with a spherical bearing end you will need this adapter mount for the top of the rear shock. Spherical or rod-end bearings are common on race shocks but they are somewhat universal and mounts are not usually included. We designed and engineered these mounts for our E9X M3 and E90 328i IMSA/CTSCC racecars. Our cacing upper shock mount is machined out of aircraft grade aluminum with a tough anodize finish and high grade hardware. Due to the wide variety of spherical bearings and rod-ends found on race shocks, the bushing kit is sold seperately (see chart for bushing sizes).

Bearing Spacer Chart
	Bushing Kit Part#	B=Bore Dia.	W=Ball Width
	TSU9007B15	15 mm	12 mm
	TSU9007B50	.500" inch	.500" inch>

E9X Racing Rear Spherical Upper Shock Mount Instructions

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible