Packaged by Turner for BMW 3 Series E90 (2006-2011)

Oil Pan Gasket replacement kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15644328

Part#: 111375351060KT

In Stock

$ 210.87 USD

Add to Wish List

Qty

$ 210.87 USD

Add to Wish List

A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years. This kit also includes the hardware for the oil pan that is a one time use item.

E82 128i N51 SULEV, E9X 328i N51 SULEV 6MT Cooling Overhaul Package ...

10X Entries Into Our F80 M3 Sweepstakes

T#:340254

Part#: TMS215326

Ships in 1 day

Starting at $ 1,233.77 USD

Add to Wish List

Starting at $ 1,233.77 USD

Add to Wish List

This cooling overhaul will cover just about everything you could replace on the 328 SULEV's cooling system. We start with the basic water pump and thermostat bundle. These are already vital to the health and durability of the N51 328 SULEV. But to properly maintain these cars for the long term, the rest of the cooling system must be refreshed and preventatively replaced. Here you can add a radiator, expansion tank, cooling hoses, and the BMW antifreeze. This package fits 128/328 SULEV with N51 engine and manual transmission.

The sophisticated electronics of the ECU and water pump means catastrophic overheating should be a thing of the past. But the downside is that the electronics can shut down without any warning or symptoms. And troubleshooting is equally frustrating since the water pump electronics are not readable or serviceable. There are several clues to a faulty thermostat or water pump - the fan runs at full speed all the time (even immediately on a cold start), pending (soft) fault code for low coolant flow, or the water pump can be heard running constantly. But when the pump fails it's an immediate shut down of the engine which can be a major inconvenience and lead to additional repairs that might have been avoided with preventative maintance. We recommend a full cooling system overhaul on the E90/E92 every 80-90,000 miles and to check for soft/pending codes at every 5,000 mile service .

Base Cooling Overhaul Package - Water Pump and Thermostat

(click to expand)

Includes:
+ Genuine BMW electric water pump, p/n 11517586925
+ mounting screws for water pump (set of 3), p/n 11510392553
+ OEM Behr thermostat, p/n 11537549476
+ Original BMW connecting hose from thermostat to water pump, p/n 11537521049
+ OEM-style hose clamps for hose (x 2)

The water pump on the N51 engine has more cooling responsibilities than ever before. The good news is that the pump only works when, and only as much, as it needs to. That means the system can actually stop the pump when it doesn't need to be running. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. The preventative replacement is your only insurance from a very inconvenient and costly breakdown in the future. Plus you get the very latest BMW water pump design with any improvements they've made since your original pump was installed.

Coolant Hoses

(click to expand)

With regular driving the hoses should last a very long time. Even the plastic connectors seem to be holding up well. But as a preventative measure new hoses are recommended. We have also seen issues with re-using hoses as the spring connectors get weak over time and may not have the strength to hold the hose in place. They seem to have a tough time holding tension especially when they have been removed and reinstalled. In the interests of a thorough overhaul we recommend replacing these 328 SULEV water hoses during this job (see diagram):

17127531579, upper radiator hose (A)
17127531581, lower radiator hose (B)
11537552396, water pump to engine ©
11537545890, thermostat to cylinder head (includes new o-ring) (D)
There are other hoses too but they are not often replaced during a radiator swap (radiator vent hose and heater core hose) and they don't see much wear. We offer these as well if you want a complete set (see Additional Items at the bottom of the page).

Expansion Tank Options

(click to expand)

The expansion tank on the 328 SULEV is not prone to failures (unlike previous 3-series cars) so a new one is not strictly required. There aren't many seams or stress points for it to crack and we haven't heard of too many issues. But we wanted to offer it as part of a complete overhaul in case you want to cover everything. Simiarly, the level sensor is not required unless you're getting erroneous 'low coolant' warnings from the dash/iDrive. We do strongly recommend replacing the cap because that is designed to be the weak point in the system. The cap is what regulates the pressure inside the system and it should be replaced every few years anyway.

Coolant Temp Sensors

(click to expand)

There are two coolant temp sensors on the 328 SULEV - in the lower radiator hose and in the cylinder head. Both feed coolant temps to the ECU to regulate the water pump and cooling fan. You should replace the one in the lower radiator hose because it's one of the main sources for coolant leaks, especially when the old sensor is re-used in a new hose. The sensor in the cylinder head is not as prone to leaks and it's easily accessible so you don't have to replace it right away. But we offer it with the package in case you want to have a complete cooling system overahul.
13621433077, coolant temp sensor (in lower radiator hose)
13621433076, coolant temp sensor (in cylinder head, next to oil filter housing)

BUY AS A PACKAGE AND SAVE $$!

This cooling package fits the following BMWs with the N51 engine and a manual transmission:
2008-2012 E82 BMW 128i SULEV
2007-2011 E90 BMW 328i 328xi 328i xDrive SULEV - Sedan
2007-2012 E91 BMW 328i 328xi 328i xDrive SULEV - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive SULEV - Coupe
2007-2013 E93 BMW 328i SULEV - Convertible
Note: not for cars that have the dealer-installed auxiliary heating option. Some of the hoses are different with that option. It's not a very common option in North America (except in parts of Canada) but there are hoses that are specific to that option.

Click on the options for your kit below and then click "update price" for your kit total.

Show More Show Less

N54 Crank Hub Service Kit - From 02/2011

For vehicles with production date from 02/2011

10X Entries Into Our F80 M3 Sweepstakes

T#:2227020

Part#: N54POCRANKT

In Stock

Sale - Save 3% $ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 146.61 USD

Add to Wish List

Qty

Sale - Save 3%

$ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 146.61 USD

Add to Wish List

All of the components necessary for service when upgrading to an aftermarket crank hub solution.

Performance Rod Bearing Replacement Kit - N54 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:36032371

Part#: N54-WPC-RBKT2

In Stock

Sale - Save 7% $ 810.99

This product was last offered at the strikethrough price on
05-03-2026

$ 754.00 USD

Add to Wish List

Qty

Sale - Save 7%

$ 810.99

This product was last offered at the strikethrough price on
05-03-2026

$ 754.00 USD

Add to Wish List

This kit includes everything needed to replace your rod bearings.

Kit includes

Upper and lower WPC-treated connecting rod bearings Hardware Oil filter Molygen New Generation Engine Oil (5w-40) - 7 Liters Oil pan gasket RedLine assembly lube

Show More Show Less

Choose Your Style - 18" Winter Wheel & Tire Package - 225/40/18 Winte...

10X Entries Into Our F80 M3 Sweepstakes

T#:21407099

Part#: WIN-18-120-72.6T

Ships in 1 day

Sale - Save 11% $ 2,335.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 2,068.99 USD

Add to Wish List

Sale - Save 11%

$ 2,335.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 2,068.99 USD

Add to Wish List

Turner Motorsport has taken the hard out of picking the correct fitment for wheels, tires, and valve stems for your E36, E46, E9X, F2X. Easily pick from the style you like, and the tires you prefer, and don't forget about the valve stems! There has never been an easier way to get the wheels and tires you need by using our Packaged By Turner options!

Show More Show Less

BMW Jack Pads With ECS Adapter Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:56797122

Part#: ECS10721KT5

Ships in 1 day

Sale - Save 5% $ 202.84

This product was last offered at the strikethrough price on
09-26-2026

$ 193.37 USD

Add to Wish List

Qty

Sale - Save 5%

$ 202.84

This product was last offered at the strikethrough price on
09-26-2026

$ 193.37 USD

Add to Wish List

Front & Rear Brake Service Kit - E90 E92 335i xDrive

For vehicles with a production date up to 09/2009

10X Entries Into Our F80 M3 Sweepstakes

T#:29898459

Part#: 34116855000RPKT6

Ships on Oct 28, 2026

Sale - Save 8% $ 648.99

This product was last offered at the strikethrough price on
05-03-2026

$ 599.93 USD

Add to Wish List

Qty

Sale - Save 8%

$ 648.99

This product was last offered at the strikethrough price on
05-03-2026

$ 599.93 USD

Add to Wish List

Restore your BMW's braking system to its original performance with this Packaged by Turner OE Front & Rear Brake Service Kit. Expertly crafted for precise fitment and dependable performance, this kit contains everything needed for a complete front brake overhaul, ensuring maximum braking efficiency and safety. Top Features: Comprehensive Package: Includes premium brake pads, rotors, and all required hardware for a thorough front and rear brake service. OE Specification: Built to original equipment standards for perfect compatibility and exceptional performance. High-Quality Materials: Made from robust materials designed to endure high temperatures and reduce wear, guaranteeing long-lasting brake functionality. Improved Safety: Engineered to deliver consistent and powerful stopping power, enhancing overall vehicle safety and control. User-Friendly Installation: Comes with all necessary components for a smooth and easy installation process. Advantages: Revitalizes Braking Performance: Upgrading worn-out parts with OE-standard components ensures your braking system operates at peak efficiency. Dependable Operation: Each part is precisely manufactured to meet or surpass original equipment specifications. Economical Maintenance: This all-inclusive kit provides a cost-effective solution for maintaining your vehicle’s brake system. Gain assurance with unmatched stopping power and reliability. Essential for preserving your vehicle's safety and performance, this kit is a must-have for any BMW owner's maintenance routine. For a detailed list of included components, please refer to the "Kit Contents" tab.

Show More Show Less

Exhaust Cooler Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:56616375

Part#: 11718576450KT2

Ships in 1 day

$ 1,262.64 USD

Add to Wish List

Qty

$ 1,262.64 USD

Add to Wish List

We’ve put together this comprehensive repair kit to tackle these common trouble spots in one shot. Featuring Genuine BMW components alongside replacement parts from Bremman, this kit ensures your vacuum system holds tight boost and your exhaust cooling stays within spec.

Show More Show Less

Water Pump And Thermostat Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15744014

Part#: 82142209769-KT

Ships in 1 Business Day

Sale - Save 9% $ 222.99

This product was last offered at the strikethrough price on
05-03-2026

$ 202.73 USD

Add to Wish List

Qty

Sale - Save 9%

$ 222.99

This product was last offered at the strikethrough price on
05-03-2026

$ 202.73 USD

Add to Wish List

The water pumps in these BMW models should be serviced near 80,000 miles and may become an issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road. Kit includes: Mahle-Behr thermostat Geba water pump Vaico coolant Mounting hardware required for the water pump O-rings for the thermostat housing

Show More Show Less

N54 Twin Turbo VTT Stock Upgrade Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15644248

Part#: 116575589220KT

Ships on Oct 27, 2026

Sale - Save 4% $ 1,912.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,845.42 USD

Add to Wish List

Qty

Sale - Save 4%

$ 1,912.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,845.42 USD

Add to Wish List

M57 Comprehensive Valve Cover Gasket Replacement Kit - BMW E90 E70 M5...

10X Entries Into Our F80 M3 Sweepstakes

T#:51883703

Part#: 11122247447CKT

In Stock

Sale - Save 1% $ 515.64

This product was last offered at the strikethrough price on
05-03-2026

$ 508.80 USD

Add to Wish List

Qty

Sale - Save 1%

$ 515.64

This product was last offered at the strikethrough price on
05-03-2026

$ 508.80 USD

Add to Wish List

As with many other BMW valve covers, replacing the M57 valve cover gasket requires numerous other parts to be removed before this gasket can be accessed. As you remove these parts, you expose other gaskets and components that can and should be replaced. This kit includes all of the gaskets, hardware, and a few other components we highly suggest replacing while completing the valve cover gasket replacement to prevent leaks and ensure your M57 continues running smoothly.

Show More Show Less

Turner TrackSport Brake Kit - Rear - E9X 335i 330i

10X Entries Into Our F80 M3 Sweepstakes

T#:636998

Part#: 024398TMSBK1KT

Ships in 4 Business Days

Sale - Save 1% $ 1,478.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,458.02 USD

Add to Wish List

Qty

Sale - Save 1%

$ 1,478.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,458.02 USD

Add to Wish List

Looking to make an easy upgrade on your BMW? We suggest upgrading your brakes with this TrackSport Brake Kit! Our TrackSport brake kit features our very own semi-floating TrackSport rotors, Pagid Racing RSL 29 brake pads, brand new stainless steel set screws, and a genuine BMW pad wear sensor. The combination of these TrackSport rotors and the RSL 29 brake pads make for an amazing combination that allows for extended track sessions, great brake fade resistance, and overall excellent braking characteristics. After feeling the change in braking performance, you'll feel confident pushing your BMW to its limits, chasing down shorter lap times! These TrackSport rotors feature a semi-floating two-piece design and slotted grooves to allow smooth, consistent braking force, and easy expulsion of gases and dust created by the brake pads and rotors under heavy braking. This means that no matter the conditions, you can expect the braking feel to remain consistent, even throughout long periods of abuse. Designed specifically for high-performance applications, these rotors are significantly more resistant to the effects of heat and friction, lessening the negative effects typically seen with standard rotors. The separation of the friction disk and the rotor hat allows for the rotor ring to expand and helps prevent heat from traveling into other sensitive braking components that could be damaged from prolonged exposure to harsh conditions. Directional veins further increase this cooling, preventing additional heat soak and keeping your BMW on the track for longer! The RSL29 pad is an endurance racing compound with long life and great wear characteristics. It has stable friction over a broad temperature range which makes them a very easy to use and predictable braking pad in a lot of environments. An evolution of the RSL19 endurance pad designed for more advanced drivers, this compound combines the outstanding wear rate of the RSL19 with a slightly higher coefficient of friction and initial bite. RSL29 also features improved heat fade resistance over the RSL19. In addition to the endurance racing, this pad will also be found in GT and VLN classes and Touring Cars (including our own E46 World Challenge cars). BMW has been using Pagid Yellow pads on their Nurburgring test vehicles and Ring Taxi for years. Included in this kit: Turner Motorsport TrackSport Rotors - 336x22mm Pagid Racing RSL 29 Brake Pads Stainless Steel Set Screws Genuine BMW Brake Pad Wear Sensor

Show More Show Less

Radium Fuel Hanger Surge Tank Complete Kit - For Walbro Pumps ...

10X Entries Into Our F80 M3 Sweepstakes
Upgrade Your Low-Pressure Fueling System With this All-Inclusive Kit!

T#:25606665

Part#: N5XFUEL

Ships on Oct 21, 2026

Sale - Save 1% $ 1,254.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,241.80 USD

Add to Wish List

Sale - Save 1%

$ 1,254.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,241.80 USD

Add to Wish List

Introducing the comprehensive N54/N55 Low-Pressure Fueling Solution! With Radium Engineering's Regulated Fuel Hanger Surge Tank at its core, this kit allows you to tailor your fuel pump setup, select an in-line fuel filter, and opt for a wiring kit for multiple LPFP configurations in your N54 or N55-powered E9X 335i. In this setup, the BMW fuel pump serves as a "lift" pump, maintaining fuel volume in the Fuel Hanger Surge Tank via a dedicated orifice. This guarantees sufficient pressure for the venturi jet pump(s) to operate, ensuring consistent fuel delivery. Excess fuel in the FHST cycles back to the OEM tank through a one-way check valve ensuring a steady fuel supply. Unlike conventional surge tanks, which rely on pump flow matching, this FHST employs additional mechanisms to continuously deliver fuel regardless of fluctuations in other fuel sources. When the main tank nears depletion, the lift pump and Fuel Pressure Regulator step in to supply fuel to the FHST. Furthermore, with a boost reference signal (Hobbs Switch), the Fuel Pressure Regulator operates at a 1:1 ratio, allowing fuel pressure to rise proportionally with boost pressure. The low-pressure fuel returning from the Fuel Pressure Regulator is routed back into the surge tank to maintain its fullness. Inside the canister, a 6-hole diverter ensures even fuel dispersion without air bubbles or foaming. The stainless electrical studs included effectively handle high current demands, surpassing the capabilities of compact bulkhead connectors. These resilient connections are sealed against all standard and exotic fuels, with non-conductive acorn nuts provided to prevent accidental short circuits. The kit also includes the necessary electrical hardware for one Walbro fuel pump and the OEM level sender, while the in-tank wiring is insulated with premium chemically resistant ETFE for enhanced durability. If you are planning on running more than one LPFP, you will need to select the Hobbs Switch option for boost reference (to be installed on the manifold or charge pipe), as well as the fuel pump wiring kit! Features: -Drop-In OEM Replacement -Permits 1 or 2 Surge Pumps -1:1 Fuel Pressure Adjustments -Fuel Starvation Protection -Integrated 1-Way Fill Valve -High Current Electrical Hardware -Compatible with Various Pumps -Anodized Aluminum Construction -Gasoline and Ethanol Compliant -Anodized Aluminum 8AN Male Outlet Fitting -Anodized Aluminum Surge Tank Canister -Fuel Resistant Tubing and Wiring -Stainless Steel Hardware -Relay(s) and Fuse(s)

Show More Show Less

Turbos and Turbocharger Installation Kit - N54

10X Entries Into Our F80 M3 Sweepstakes

T#:55317702

Part#: 13712247398KT5

Ships on Oct 27, 2026

$ 1,869.81

This product was last offered at the strikethrough price on
09-10-2026

$ 1,869.38 USD

Add to Wish List

Qty

$ 1,869.38 USD

Add to Wish List

Are your factory N54 turbos plagued by the dreaded wastegate rattle, or worse, starting to blow smoke? Don't just replace them—upgrade your ultimate driving machine with the ultimate DIY refresh kit.

Show More Show Less

Basic Cooling System Service Kit - E82/88 E9X N55 3.0L w/ Auto Transm...

10X Entries Into Our F80 M3 Sweepstakes

T#:557227

Part#: E8XE9XN55ABCKT

Ships in 10 Business Days

Sale - Save 23% $ 745.99

This product was last offered at the strikethrough price on
05-03-2026

$ 570.81 USD

Add to Wish List

Qty

Sale - Save 23%

$ 745.99

This product was last offered at the strikethrough price on
05-03-2026

$ 570.81 USD

Add to Wish List

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Show More Show Less

Performance Front & Rear Brake Service Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15677556

Part#: 34112283801-KT

Back Ordered

Sale - Save 3% $ 2,024.99

This product was last offered at the strikethrough price on
07-14-2026

$ 1,971.93 USD

Add to Wish List

Qty

Sale - Save 3%

$ 2,024.99

This product was last offered at the strikethrough price on
07-14-2026

$ 1,971.93 USD

Add to Wish List

Everything you need to service your front and rear brakes in an afternoon in one simple kit Includes the following parts: Front and rear OEM Zimmermann rotors Front and rear Hawk HPS pads Front and rear pad wear sensors ECS stainless steel rotor set screws Brake lubricant compound packet

Show More Show Less

E82 / E9X M3 Performance Front & Rear Brake Service Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:22954173

Part#: E82E9XFARBRAKESK

Back Ordered

Sale - Save 4% $ 2,570.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,463.82 USD

Add to Wish List

Qty

Sale - Save 4%

$ 2,570.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,463.82 USD

Add to Wish List

Upgrade your front and rear brakes effortlessly with the Turner Motorsport Brake Service Kit. Simplify your brake service with everything included in one kit, eliminating the hassle of gathering individual components. This all-in-one kit comprises rotors, pads, sensors, assembly grease, and set screws, providing a comprehensive solution for your brake upgrade. Handpicked and assembled by experts, this kit ensures top-quality components and seamless brake performance.

The kit includes:

Front Turner Motorsport 2-piece semi-floating cross-drilled and slotted rotors
Rear Turner Motorsport 2-piece semi-floating cross-drilled and slotted rotors
Hawk HPS pads for both front and rear brakes
Front and rear pad wear sensors
Turner Motorsport stainless steel rotor set screws
Brake lubricant compound

Elevate your brake system's performance with Turner Motorsport's Brake Service Kit, designed to meet your braking needs effectively and conveniently.

Show More Show Less

18" Alzor Wheel & Tire Package - ET35-38 Offset - 225/40/18 Tires ...

10X Entries Into Our F80 M3 Sweepstakes

T#:21407083

Part#: ALZ-18X859WTM

Ships in 5 Business Days

Sale - Save 17% $ 1,691.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,401.00 USD

Add to Wish List

Sale - Save 17%

$ 1,691.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,401.00 USD

Add to Wish List

Turner Motorsport has taken the hard out of picking the correct fitment for wheels, tires, and valve stems for your E34, E36, E46, E53, E8X, E9X, F0X, F1X, F3X, and F3X. Easily pick from the style you like, and the tires you prefer, and don't forget about the valve stems! There has never been an easier way to get the wheels and tires you need by using our Packaged By Turner options!

Show More Show Less

Rotor And Pad Replacement Package - Front And Rear - E9X 325xi 328xi ...

For vehicles with a production date up to 09/2007

10X Entries Into Our F80 M3 Sweepstakes

T#:558416

Part#: E90X1RPRPKT

Ships on Nov 17, 2026

Sale - Save 10% $ 545.99

This product was last offered at the strikethrough price on
09-26-2026

$ 488.75 USD

Add to Wish List

Qty

Sale - Save 10%

$ 545.99

This product was last offered at the strikethrough price on
09-26-2026

$ 488.75 USD

Add to Wish List

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance.

Included in this E9X BMW brake package are all of the OEM equivalent components needed to replace your Front and Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

Pagid Euro Front & Rear Brake Pads
Zimmerman Front & Rear Rotors
New Front & Rear Wear Sensors
Brand New Stainless Steel Set Screws
Syl-Glide Silicone Brake Lubricant

Fits the following BMWs:
2006-09/2007 E9X BMW 325xi 328xi

Show More Show Less

Rotor And Pad Replacement Package - Front - E9X 325xi 328xi (up To 09...

For vehicles with production date up to 09/2007

10X Entries Into Our F80 M3 Sweepstakes

T#:558417

Part#: E90X1RPRPKT2

Ships on Nov 17, 2026

Sale - Save 21% $ 274.99

This product was last offered at the strikethrough price on
09-26-2026

$ 218.34 USD

Add to Wish List

Qty

Sale - Save 21%

$ 274.99

This product was last offered at the strikethrough price on
09-26-2026

$ 218.34 USD

Add to Wish List

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance.

Included in this E9X BMW brake package are all of the OEM equivalent components needed to replace your Front brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

Pagid Euro Front Brake Pads
Zimmerman Front Rotors
New Front Wear Sensors
Brand New Stainless Steel Set Screws
Syl-Glide Silicone Brake Lubricant

Fits the following BMWs:
2006-09/2007 E9X BMW 325xi 328xi

Show More Show Less

Complete Front & Rear Brake Package - E90 325Xi AWD

10X Entries Into Our F80 M3 Sweepstakes

T#:340248

Part#: TMS2762

Ships on Nov 17, 2026

Sale - Save 18% $ 551.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 451.35 USD

Add to Wish List

Sale - Save 18%

$ 551.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 451.35 USD

Add to Wish List

This brake package for the 2006 BMW E90 325Xi AWD comes with everything you need to perform a major brake overhaul --

Front and rear rotors with hardware - OEM replacements, TMS cross-drilled, or TMS gas-slotted
Front and rear brake pads - Stoptech Street Performance (Turner Preferred), OEM (Textar)
Front and rear pad wear sensors
Brake fluid Low viscosity for street use or high performance/racing fluid for track use.

A complete set of replacement brake components to get your 325Xi back to spec. Our kits use OE, OEM, and performance-designed parts that meet our standards for fitment, quality, performance, and durability. You don't have to pay high prices at the dealer to get the same quality and performance.

Brake Package FAQ

Brake Pad Buying Guide

Brake Rotor Buying Guide

Show More Show Less

Complete Front & Rear Brake Package - E9X 328i (2007)

10X Entries Into Our F80 M3 Sweepstakes

T#:340249

Part#: TMS2813

Ships on Nov 17, 2026

Sale - Save 12% $ 554.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 488.40 USD

Add to Wish List

Sale - Save 12%

$ 554.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 488.40 USD

Add to Wish List

This brake package for the 2007 BMW E90/E92 328i comes with everything you need to perform a major brake overhaul -

Front and rear rotors with hardware - OEM replacements, TMS cross-drilled, or TMS gas-slotted
Front and rear brake pads - stock OEM, low dust street, or performance street
Front and rear pad wear sensors
Brake fluid Low viscosity for street use or high performance/racing fluid for track use.

A complete set of replacement brake components to get your 2007 E90/E92 328i back to spec. Our packages may use OE, OEM, and performance-designed parts that meet our standards for fitment, quality, performance, and durability. You don't have to pay high prices at the dealer to get the same quality and performance.

Brake Package FAQ

Brake Pad Buying Guide

Brake Rotor Buying Guide

Applications:
2007 E90 328i sedan
2007 E92 328i coupe

Show More Show Less

Complete Front & Rear Brake Package - E90 325i

10X Entries Into Our F80 M3 Sweepstakes

T#:340247

Part#: TMS2263

Ships on Nov 17, 2026

Sale - Save 12% $ 554.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 488.40 USD

Add to Wish List

Sale - Save 12%

$ 554.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 488.40 USD

Add to Wish List

This brake package for the 2006 BMW E90 325i comes with everything you need to perform a major brake overhaul -

Front and rear rotors with hardware - OEM replacements, TMS cross-drilled, or TMS gas-slotted
Front and rear brake pads - Axxis/PBR Metal Master (TMS-preferred), OEM (Textar)
Front and rear pad wear sensors
Brake fluid Low viscosity for street use or high performance/racing fluid for track use.

A complete set of replacement brake components to get your 2006 E90 325i back to spec. Our packages may use OE, OEM, and performance-designed parts that meet our standards for fitment, quality, performance, and durability. You don't have to pay high prices at the dealer to get the same quality and performance.

Brake Package FAQ

Brake Pad Buying Guide

Brake Rotor Buying Guide

Show More Show Less

High-Performance Cooling System Service Kit - Level 1

10X Entries Into Our F80 M3 Sweepstakes

T#:38229085

Part#: 11517588885KT5

In Stock

Sale - Save 8% $ 1,433.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,314.11 USD

Add to Wish List

Qty

Sale - Save 8%

$ 1,433.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,314.11 USD

Add to Wish List

Due to weak rubber and plastic construction, vital cooling system parts are prone to premature failure. Key components, such as radiator hoses, the thermostat, and the expansion tank are particularly prone to cracks, leaks, and catastrophic failure, which can lead to overheating and potentially severe engine damage. Fortunately, our team of experts has assembled this kit of high-performance alternatives and high-quality OE replacement components, both tailored to safeguard your cooling system from failure and increase cooling system capability.

The Turner Motorsport Level 1 Performance Cooling System Refresh Kit is the ultimate solution for ensuring long-term reliability and enhanced cooling performance. Each component in this comprehensive kit has been carefully selected by our team of enthusiasts to address common failure points and provide a robust, performance-oriented upgrade for your vehicle. By replacing aging factory parts with premium, high-performance alternatives, you’ll optimize cooling efficiency and safeguard your engine from the stress of overheating.

Our comprehensive "Level 1" High-Performance Cooling System Service Kit includes:

Turner Motorsport Heavy Duty Aluminum Expansion Tank Pierburg Full Aluminum Water Pump ECS Aluminized Water Pump Hose V2.0 Bremmen Parts Thermostat ECS Performance Silicone Radiator Hose Kit Genuine BMW Blue G48 Antifreeze (2 Gallons) Redline Water Wetter (12 oz.)

Show More Show Less

Front Suspension Refresh Kit - Level 2

10X Entries Into Our F80 M3 Sweepstakes

T#:15677491

Part#: 31106797237-KT

Ships in 3 Business Days

Sale - Save 9% $ 927.99

This product was last offered at the strikethrough price on
05-04-2026

$ 848.63 USD

Add to Wish List

Qty

Sale - Save 9%

$ 927.99

This product was last offered at the strikethrough price on
05-04-2026

$ 848.63 USD

Add to Wish List

Level 2 suspension refresh kit is designed to offer a complete overhaul of your BMW's front suspension. This kit address all suspension symptoms such as loose or not precise steering, clunking and wandering. Every component, from the control arms (with pressed in bushings) down to the tie rods and sway bar bushings are included for a new car feel. This refresh can be performed by a competent enthusiast in a day, assuming the correct tools are available. See kit contents tab for a list of included components

Show More Show Less

Turner Front And Rear Suspension Refresh Kit - Level 3 - E9X 325/328/...

10X Entries Into Our F80 M3 Sweepstakes

T#:24344772

Part#: 311267689893T3KT

Ships on Oct 21, 2026

Sale - Save 7% $ 2,298.79

This product was last offered at the strikethrough price on
08-11-2026

$ 2,138.62 USD

Add to Wish List

Qty

Sale - Save 7%

$ 2,298.79

This product was last offered at the strikethrough price on
08-11-2026

$ 2,138.62 USD

Add to Wish List

No more clunks, squeaks, or wandering from the front or tail end of your BMW. Address problems all in one service - don't replace another component every few weeks, make it better than new! Level 3 includes: OEM Front & Rear Control Arms & Bushings OEM Tie Rods OEM Strut Mounts Sway Bar Bushings & Endlinks Rear Subframe Bushings Installation Hardware

Show More Show Less

Front & Rear Brake Service Kit - E90/E92 335xi

For vehicles with a production date from 09/09

10X Entries Into Our F80 M3 Sweepstakes

T#:29964954

Part#: 34116855000RPKT8

Ships in 5 Business Days

Sale - Save 8% $ 650.99

This product was last offered at the strikethrough price on
05-03-2026

$ 602.09 USD

Add to Wish List

Qty

Sale - Save 8%

$ 650.99

This product was last offered at the strikethrough price on
05-03-2026

$ 602.09 USD

Add to Wish List

Restore your BMW's braking system to its original performance with this Packaged by Turner OE Front & Rear Brake Service Kit. Expertly crafted for precise fitment and dependable performance, this kit contains everything needed for a complete front brake overhaul, ensuring maximum braking efficiency and safety. Top Features: Comprehensive Package: Includes premium brake pads, rotors, and all required hardware for a thorough front and rear brake service. OE Specification: Built to original equipment standards for perfect compatibility and exceptional performance. High-Quality Materials: Made from robust materials designed to endure high temperatures and reduce wear, guaranteeing long-lasting brake functionality. Improved Safety: Engineered to deliver consistent and powerful stopping power, enhancing overall vehicle safety and control. User-Friendly Installation: Comes with all necessary components for a smooth and easy installation process. Advantages: Revitalizes Braking Performance: Upgrading worn-out parts with OE-standard components ensures your braking system operates at peak efficiency. Dependable Operation: Each part is precisely manufactured to meet or surpass original equipment specifications. Economical Maintenance: This all-inclusive kit provides a cost-effective solution for maintaining your vehicle’s brake system. Gain assurance with unmatched stopping power and reliability. Essential for preserving your vehicle's safety and performance, this kit is a must-have for any BMW owner's maintenance routine. For a detailed list of included components, please refer to the "Kit Contents" tab.

Show More Show Less

Basic Vibration Damper Replacement Kit w/ Specialty Tool Kit - E90 33...

10X Entries Into Our F80 M3 Sweepstakes

T#:27672136

Part#: 11238511371TKT8

Ships on Mar 8, 2027

Sale - Save 1% $ 561.99

This product was last offered at the strikethrough price on
05-03-2026

$ 556.40 USD

Add to Wish List

Qty

Sale - Save 1%

$ 561.99

This product was last offered at the strikethrough price on
05-03-2026

$ 556.40 USD

Add to Wish List

The vibration damper in the 335d is a common failure item and can fail at as low as 60 thousand miles leaving you stranded. This kit includes everything needed to replace your vibration damper and service your drive belt system! Vibration Dampers (also called Harmonic Dampers or Harmonic Balancers) absorb and remove unwanted vibrations due to torsional twisting of the crankshaft. During cylinder combustions, the crank quickly flexes ever so slightly, resulting in resonance vibrations. These vibrations could lead to damage of the crankshaft or crank bearings over time if not accounted for. The vibration damper helps to eliminate these vibrations, thereby extending the life of your engine's mechanical components and preventing damage. If your vibration damper has failed, you will likely notice excess engine vibrations or shaking that will gradually get worse, especially around certain RPMs where the vibration resonance is most pronounced. This basic kit includes the components necessary to replace your damper with an OEM damper from Corteco, including two belts and the Corteco Vibration Damper pulley. Also included in this kit is a brand-new line of specialty tools from Schwaben designed specifically for this replacement! You will get a Crankshaft Pulley Turner Tool, Stretch Belt Remover/Installer, T50 Alternator Wrench, and a 15/16" Pass-Through Socket, all included to make swapping out your old damper a quick and easy process! Standard tools you might need but are not included: 8mm Drill Bit (to use as flywheel locking pin) 32mm Fan Clutch Wrench - You may want a second 32mm to hold the coupler in place 24mm Box Wrench - For releasing tensioner Torque Wrench - To torque new crankshaft bolts Breaker Bar - to drive the crankshaft bolts further

Show More Show Less

OEM Accessory Belt Service Kit - E90 335d

10X Entries Into Our F80 M3 Sweepstakes

T#:554452

Part#: 335DACCKT

Ships on Feb 3, 2027

Sale - Save 4% $ 232.99

This product was last offered at the strikethrough price on
08-26-2026

$ 224.47 USD

Add to Wish List

Qty

Sale - Save 4%

$ 232.99

This product was last offered at the strikethrough price on
08-26-2026

$ 224.47 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need to be replaced such as the belts, tensioners, and hardware.

Show More Show Less

Complete Vibration Damper Replacement Kit w/ Specialty Tool Kit - E90...

10X Entries Into Our F80 M3 Sweepstakes

T#:27672135

Part#: 11238511371TKT7

Ships on Mar 8, 2027

Sale - Save 2% $ 751.99

This product was last offered at the strikethrough price on
08-26-2026

$ 740.67 USD

Add to Wish List

Qty

Sale - Save 2%

$ 751.99

This product was last offered at the strikethrough price on
08-26-2026

$ 740.67 USD

Add to Wish List

The vibration damper in the 335d is a common failure item and can fail at as low as 60 thousand miles leaving you stranded. This kit includes everything needed to replace your vibration damper and service your drive belt system! Vibration Dampers (also called Harmonic Dampers or Harmonic Balancers) absorb and remove unwanted vibrations due to torsional twisting of the crankshaft. During cylinder combustions, the crank quickly flexes ever so slightly, resulting in resonance vibrations. These vibrations could lead to damage of the crankshaft or crank bearings over time if not accounted for. The vibration damper helps to eliminate these vibrations, thereby extending the life of your engine's mechanical components and preventing damage. If your vibration damper has failed, you will likely notice excess engine vibrations or shaking that will gradually get worse, especially around certain RPMs where the vibration resonance is most pronounced. This kit includes all of the components necessary to replace your damper with an OEM damper from Corteco, including belts, pulleys, hardware, and more. Also included in this kit is a brand-new line of specialty tools from Schwaben designed specifically for this replacement! You will get a Crankshaft Pulley Turner Tool, Stretch Belt Remover/Installer, T50 Alternator Wrench, and a 15/16" Pass-Through Socket, all included to make swapping out your old damper a quick and easy process! Standard tools you might need but are not included: 8mm Drill Bit (to use as flywheel locking pin) 32mm Fan Clutch Wrench - You may want a second 32mm to hold the coupler in place 24mm Box Wrench - For releasing tensioner Torque Wrench - To torque new crankshaft bolts Breaker Bar - to drive the crankshaft bolts further

Show More Show Less

Front And Rear Suspension Refresh Kit HD - Level 3

10X Entries Into Our F80 M3 Sweepstakes

T#:15710810

Part#: 31126768989-KT

Ships on Oct 21, 2026

Sale - Save 1% $ 2,156.18

This product was last offered at the strikethrough price on
09-04-2026

$ 2,142.11 USD

Add to Wish List

Qty

Sale - Save 1%

$ 2,156.18

This product was last offered at the strikethrough price on
09-04-2026

$ 2,142.11 USD

Add to Wish List

Refresh your whole suspension system back to new with this level 3 refresh kit! Including all the components and hardware you need, this kit will transform your vehicle's ride back to showroom quality. All the parts you need at the click of a button!

Show More Show Less

18" Winter Wheel & Tire Package - 225/40/18 Winter Tires

10X Entries Into Our F80 M3 Sweepstakes

T#:587286

Part#: WINTYRSET

Back Ordered

Sale - Save 11% $ 2,089.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,859.25 USD

Add to Wish List

Sale - Save 11%

$ 2,089.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,859.25 USD

Add to Wish List

Purchasing tires separately and waiting to have them mounted and balanced are now a thing of the past thanks to thanks to our Wheel & Tire Package! Just select your wheels and tires and our technicians will mount and balance them on state of the art CEMB tire changing equipment. *New valve stems are included but we do not offer TPMS (Tire Pressure Monitoring Sensor) installation at this time. This service is intended for vehicles without TPMS or vehicles that utilize the ABS sensor to monitor tire pressure.

Show More Show Less

Cooling System overhaul Kit - E82/88 135i E9X 335i/xi/ix N54 manual t...

10X Entries Into Our F80 M3 Sweepstakes

T#:554121

Part#: 11537558522KT3

Back Ordered

Sale - Save 5% $ 1,573.99

This product was last offered at the strikethrough price on
04-10-2026

$ 1,500.27 USD

Add to Wish List

Qty

Sale - Save 5%

$ 1,573.99

This product was last offered at the strikethrough price on
04-10-2026

$ 1,500.27 USD

Add to Wish List

This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E82/88 135i or E90/92/93 335i/xi/is with the N54 engine.

A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts.

For vehicles with manual transmission only

Show More Show Less

Cooling System Refresh Kit - Level 2

10X Entries Into Our F80 M3 Sweepstakes

T#:15677500

Part#: 82141467704-KT

Back Ordered

Sale - Save 19% $ 832.99

This product was last offered at the strikethrough price on
05-03-2026

$ 672.46 USD

Add to Wish List

Qty

Sale - Save 19%

$ 832.99

This product was last offered at the strikethrough price on
05-03-2026

$ 672.46 USD

Add to Wish List

As your mileage increases, so does wear and tear on your engine's cooling components. Cooling system components live a rough life, going through extreme temperature changes and being exposed to the elements. A cooling system failure can, and probably will leave you stranded. For automatic transmission (or DCT) vehicles only This kit includes: Thermostat with mounting hardware 1 gallon of BMW coolant Water pump with mounting hardware Primary cooling system hoses and radiator hose gasket, and bleeder screw Expansion tank with cap Accessory belt

Show More Show Less

Cooling System overhaul Kit - E82/88 135i E9X 335i/xi/ix N54 Automati...

10X Entries Into Our F80 M3 Sweepstakes

T#:554111

Part#: 11510392553RKT3

Back Ordered

Sale - Save 2% $ 1,660.99

This product was last offered at the strikethrough price on
04-10-2026

$ 1,632.19 USD

Add to Wish List

Qty

Sale - Save 2%

$ 1,660.99

This product was last offered at the strikethrough price on
04-10-2026

$ 1,632.19 USD

Add to Wish List

This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E82/88 135i or E90/92/93 335i/xi/is with the N54 engine.

A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts.

For vehicles with automatic or DCT transmission only

Show More Show Less

High Performance Cooling System Upgrade - E9X 335i N54 w/ Manual Tran...

10X Entries Into Our F80 M3 Sweepstakes

T#:557323

Part#: E9XN54PCKT

Back Ordered

$ 2,160.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,155.52 USD

Add to Wish List

Qty

$ 2,155.52 USD

Add to Wish List

If you plan to drive your BMW aggressively on the track, it is important that you upgrade your cooling system to avoid overheating. To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative! This kit includes a high performance CSF Aluminum Radiator for significantly better cooling than the stock radiator and full aluminum construction that won't crack from long term heat cycling, and a Mishimoto Performance 74*C thermostat for lower temperature operation and increased cooling of the engine.

Additional items included in this kit:

OEM Replacement Coolant Hoses
ECS Tuning Silicone Coolant Outlet Hose with ECS Billet Thermostat Hose Adapter
ECS Tuning Aluminized Water Pump Hose
OEM Expansion Tank, Cap, and Level Sensor
OEM Belts, Tensioners, and Pulleys
OEM Auxiliary Fan Switch
OEM VDO Water Pump
Genuine BMW Hardware for Easy Installation
Genuine BMW Antifreeze/Coolant (Undiluted) - 2 Gallons

Show More Show Less

High Performance Cooling System Upgrade - E9X 335i N54 w/ DCT/Auto Tr...

10X Entries Into Our F80 M3 Sweepstakes

T#:557324

Part#: E9XN54PCKT2

Back Ordered

$ 2,180.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,176.86 USD

Add to Wish List

Qty

$ 2,176.86 USD

Add to Wish List

If you plan to drive your BMW aggressively on the track, it is important that you upgrade your cooling system to avoid overheating. To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative! This kit includes a high performance CSF Aluminum Radiator for significantly better cooling than the stock radiator and full aluminum construction that won't crack from long term heat cycling, and a Mishimoto Performance 74*C thermostat for lower temperature operation and increased cooling of the engine.

Additional items included in this kit:

OEM Replacement Coolant Hoses
ECS Tuning Silicone Coolant Outlet Hose with ECS Billet Thermostat Hose Adapter
ECS Tuning Aluminized Water Pump Hose
OEM Expansion Tank, Cap, and Level Sensor
OEM Belts, Tensioners, and Pulleys
OEM Auxiliary Fan Switch
OEM VDO Water Pump
Genuine BMW Hardware for Easy Installation
Genuine BMW Antifreeze/Coolant (Undiluted) - 2 Gallons

Show More Show Less

Cooling System Refresh Kit - Level 2 - E9x, E82, E88, Z4

10X Entries Into Our F80 M3 Sweepstakes

T#:42099868

Part#: 11537558523TKT

Back Ordered

Sale - Save 19% $ 829.99

This product was last offered at the strikethrough price on
05-03-2026

$ 670.68 USD

Add to Wish List

Qty

Sale - Save 19%

$ 829.99

This product was last offered at the strikethrough price on
05-03-2026

$ 670.68 USD

Add to Wish List

Keep your BMW running at the proper temperature and avoid costly engine repairs with the Cooling System Refresh Kit, the complete maintenance solution trusted by enthusiasts and professionals alike.

Show More Show Less

Low-Temperature N54 Oil Thermostat Overhaul Kit

10X Entries Into Our F80 M3 Sweepstakes
For 2008+ models only

T#:26705034

Part#: 090743ECS09KT2

Back Ordered

Sale - Save 9% $ 249.99

This product was last offered at the strikethrough price on
05-03-2026

$ 226.76 USD

Add to Wish List

Qty

Sale - Save 9%

$ 249.99

This product was last offered at the strikethrough price on
05-03-2026

$ 226.76 USD

Add to Wish List

Ensure optimal performance and longevity for your BMW N54 engine with this comprehensive upgrade kit assembled by enthusiasts at Turner Motorsport!

High-performance low-temp oil thermostat for superior cooling efficiency Anodized aluminum oil thermostat shaft ensures durability and surface protection Premium quality thermostat spring and bung for reliable operation Anodized thermostat cover with external fins maximizes cooling effectiveness Complete installation kit includes gasket and hardware for hassle-free setup Includes Liqui Moly Special-Tec LL 5W-30 oil, new oil filter, filter housing gasket, and drain plug for a complete service Elevate your N54's cooling system and maintain optimal oil temperatures between 194F and 230F with this all-inclusive upgrade kit.

Show More Show Less

Cooling System Refresh Kit - Level 3

For vehicles with automatic or DCT transmissions

10X Entries Into Our F80 M3 Sweepstakes

T#:41188189

Part#: 11510392553TKT

Back Ordered

Sale - Save 9% $ 1,316.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,200.53 USD

Add to Wish List

Qty

Sale - Save 9%

$ 1,316.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,200.53 USD

Add to Wish List

This all-in-one kit provides every essential component to overhaul your vehicle’s cooling system and complete a full radiator and drive belt service.

Turner TrackSport Brake Kit - Front - E9X M3, E82 1 M Coupe

10X Entries Into Our F80 M3 Sweepstakes

T#:637008

Part#: 025518TMSBKKT

Ships on Jan 22, 2027

Sale - Save 4% $ 1,927.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,860.10 USD

Add to Wish List

Qty

Sale - Save 4%

$ 1,927.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,860.10 USD

Add to Wish List

Looking to make an easy upgrade on your BMW? We suggest upgrading your brakes with this TrackSport Brake Kit! Our TrackSport brake kit features our very own full-floating TrackSport rotors, Pagid Racing RSL 19 brake pads, brand new stainless steel set screws, and a genuine BMW pad wear sensor. The combination of these TrackSport rotors and the RSL 19 brake pads make for an amazing combination that allows for extended track sessions, great brake fade resistance, and overall excellent braking characteristics. After feeling the change in braking performance, you'll feel confident pushing your BMW to its limits, chasing down shorter lap times! These TrackSport rotors feature a full-floating two-piece design and slotted grooves to allow smooth, consistent braking force, and easy expulsion of gases and dust created by the brake pads and rotors under heavy braking. This means that no matter the conditions, you can expect the braking feel to remain consistent, even throughout long periods of abuse. Designed specifically for high-performance applications, these rotors are significantly more resistant to the effects of heat and friction, lessening the negative effects typically seen with standard rotors. The separation of the friction disk and the rotor hat allows for the rotor ring to expand and helps prevent heat from traveling into other sensitive braking components that could be damaged from prolonged exposure to harsh conditions. Directional veins further increase this cooling, preventing additional heat soak and keeping your BMW on the track for longer! RSL19 A favorite of BMW's Motorsport engineers, the Pagid RSL19 compound is an endurance pad based on the RS14 Black but with less friction to improve modulation and low pedal effort. These pads work best in a heat range up to 1,100* F. The combination of friction levels, fade stability, and long life for pads and rotors makes this a favorite for club and HPDE drivers. Included in this kit: Turner Motorsport TrackSport Rotors - 360x30mm Pagid Racing RSL 19 Brake Pads Stainless Steel Set Screws Genuine BMW Brake Pad Wear Sensor

Show More Show Less

Low-Temperature N54 Oil Thermostat Overhaul Kit

10X Entries Into Our F80 M3 Sweepstakes
For 2006-2007 models only

T#:26705005

Part#: 090766ECS09KT2

Back Ordered

Sale - Save 9% $ 245.99

This product was last offered at the strikethrough price on
05-03-2026

$ 223.36 USD

Add to Wish List

Qty

Sale - Save 9%

$ 245.99

This product was last offered at the strikethrough price on
05-03-2026

$ 223.36 USD

Add to Wish List

Ensure optimal performance and longevity for your BMW N54 engine with this comprehensive upgrade kit assembled by enthusiasts at Turner Motorsport!

High-performance low-temp oil thermostat for superior cooling efficiency Anodized aluminum oil thermostat shaft ensures durability and surface protection Premium quality thermostat spring and bung for reliable operation Anodized thermostat cover with external fins maximizes cooling effectiveness Complete installation kit includes gasket and hardware for hassle-free setup Includes Liqui Moly Special-Tec LL 5W-30 oil, new oil filter, filter housing gasket, and drain plug for a complete service Elevate your N54's cooling system and maintain optimal oil temperatures between 194F and 230F with this all-inclusive upgrade kit.

Show More Show Less

Project Cars

SELECT YOUR BMW

Packaged by Turner for BMW 3 Series E90 (2006-2011)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results