BMW Exhaust Gaskets Hangers and Parts for BMW 3 Series E91 (2006-2012)

Engineered for vehicles with vacuum-actuated exhaust valves, the ECS Remote Vacuum Exhaust Valve Control Kit puts you in complete command of your exhaust sound. This fully standalone system lets you open or close your valves instantly—no reliance on factory controls, drive modes, or complicated wiring.

At its heart is a self-contained vacuum pump and dedicated control module, operating entirely independent of your vehicle’s electronics. The result is broad compatibility with both OEM and aftermarket exhaust systems, allowing for the freedom to switch between aggressive performance sounds and a refined, quiet tone at the touch of a button.

Kit Includes:

Standalone Vacuum Pump – Delivers consistent vacuum for reliable valve function

Wiring Harness Options – Choose from a reversible cigarette lighter power adapter or a length of wire for custom hardwiring

High-Quality Vacuum Hose – Durable, leak-resistant construction for long-lasting performance

Remote Controllers – Compact fobs for easy operation from inside or outside the vehicle

Features:

Instant open/close control for exhaust valves

Operates completely independent of factory electronics

Universal compatibility with vacuum-actuated valve systems

Ideal for both aftermarket and factory exhaust setups

From stealthy early-morning starts to unleashing your exhaust’s full roar on demand, the ECS Remote Vacuum Exhaust Valve Control Kit gives you total control over your car’s voice—whenever and wherever you want it.

Tired of busting your knuckles from old hardened exhaust hangers?

This Schwaben tool removes the hanger by pressing on the steel hanger bracket and pulling the rubber hanger in one motion. Self centering force pin locks onto the pin while the flat paddle pulls off the rubber hanger from behind. Slim profile and a 25 degree offset works in tight areas.

Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees! 

Key Features:

• 2" wide x 1/16" thick
• Durable, tightly woven, 100% fiberglass
• Reduce under hood temperatures
• Protect other engine components
• Protect your hands/arms from burns
• Each roll comes with 5 FREE, 14" long stainless steel zip ties

OE BMW exhaust manifold mounting hex nuts. Best to replace when installing new headers or removing the old exhaust headers for any reason. We also recommend replacing the exhaust studs as well do to corrosion often building up on the end, preventing them from being removed or installed easily.

COPPER HEX NUT - 7mm : 119500

Enhance your BMW's hose connections with this sleek and reliable smooth clamp. Crafted specifically for BMW models, this clamp ensures secure and leak-free connections for hoses. Experience improved durability and functionality in your BMW's system with this purpose-built smooth clamp.

Key Benefits:

• Secure and leak-free hose connections
• Designed specifically for BMW models
• Enhanced durability for long-term use

This exhaust gasket is used to seal the exhaust manifold to the downpipes. We also recommend replacing the bolts as well.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits these BMW engines:
N52 3.0L

Achieving precise exhaust fitment can be tricky—especially when the exhaust hanger has room to slide. This movement can cause annoying rattles or even lead to contact with the underbody or rear bumper. The ECS Tuning Exhaust Locking Collar offers a simple and effective fix. Designed to clamp securely around the exhaust hanger, this collar keeps everything firmly in place, eliminating unwanted movement.

Crafted from high-strength 6031 billet aluminum and finished in a sleek black anodized coating, it delivers both durability and corrosion resistance. With this collar in place, your exhaust stays exactly where it should—no rattles, no surprises.

Product Design:

Made from precision machined 6061 aluminum Black anodized finish Stainless steel M5 X 0.8mm hardware Installation & Support:

Install the locking collar around your exhaust hanger, position the hanger in place, and snug the locking collar down in place against the hanger! ECS Exhaust Hanger Locking Collars are available for 10mm and 12mm exhaust hangers. Please measure your hangers before ordering. The 10mm locking collar can be found HERE.

Achieving precise exhaust fitment can be tricky—especially when the exhaust hanger has room to slide. This movement can cause annoying rattles or even lead to contact with the underbody or rear bumper. The ECS Tuning Exhaust Locking Collar offers a simple and effective fix. Designed to clamp securely around the exhaust hanger, this collar keeps everything firmly in place, eliminating unwanted movement.

Crafted from high-strength 6031 billet aluminum and finished in a sleek black anodized coating, it delivers both durability and corrosion resistance. With this collar in place, your exhaust stays exactly where it should—no rattles, no surprises.

Product Design:

Made from precision machined 6061 aluminum Black anodized finish Stainless steel M5 X 0.8mm hardware Installation & Support:

Install the locking collar around your exhaust hanger, position the hanger in place, and snug the locking collar down in place against the hanger! ECS Exhaust Hanger Locking Collars are available for 10mm and 12mm exhaust hangers. Please measure your hangers before ordering. The 12mm locking collar can be found HERE.

The Rein Exhaust Joint Sleeve Bushing 8mm EXB0045 is a premium-quality part designed to ensure a secure and reliable connection in BMW exhaust systems. Manufactured by Rein, this 8mm diameter sleeve bushing is built to withstand high heat and vibration, providing long-lasting durability and maintaining the efficiency of your BMW’s exhaust flow. Perfect for replacing worn-out components, this bushing enhances exhaust system stability and prevents leaks, ensuring your vehicle runs smoothly.

Available through Turner Motorsport, the Rein Exhaust Joint Sleeve Bushing 8mm EXB0045 is designed to meet or exceed OEM specifications, making it ideal for BMW owners looking to restore their vehicle’s performance. Whether you're a professional mechanic or a DIY enthusiast, this exhaust bushing is easy to install and helps maintain optimal performance in high-stress conditions.

Benefits:

• Precision fitment: Specifically engineered for an 8mm diameter, ensuring a seamless fit for BMW exhaust systems.
• Durable materials: Made from high-quality materials that resist heat, pressure, and wear over time.
• Leak-proof seal: Helps prevent exhaust leaks, maintaining efficient exhaust flow and reducing noise.
• Vibration dampening: Reduces vibrations and noise for a smoother, quieter driving experience.
• Available at Turner Motorsport: Trusted source for high-quality BMW parts and accessories.

Upgrade your BMW’s exhaust system with the Rein Exhaust Joint Sleeve Bushing 8mm EXB0045, ensuring a durable, leak-free connection that enhances overall performance.