19" APEX VS-5RS Staggered Wheel Set - Choose Your Finish

2X Entries Into Our F80 M3 Sweepstakes

T#:19560877

Part#: VS5RS199H10

Ships in 5 Business Days

Starting at $ 3,510.00 USD

Add to Wish List

Starting at $ 3,510.00 USD

Add to Wish List

Spring Line Forged wheels from Apex Wheels feature: Side milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Staggered Setup 19x9" ET30 19x10" ET25 APEX VS-5RS Forged BMW Wheels On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hubcentric built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If your already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

18" APEX EC-7 Square Wheel Set

2X Entries Into Our F80 M3 Sweepstakes

T#:19395578

Part#: EC718931SQ

Ships in 5 Business Days

Starting at $ 1,596.00 USD

Add to Wish List

Starting at $ 1,596.00 USD

Add to Wish List

Apex ARC8 18x9" ET31 Wheel Set Apex 9" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

APEX ARC-8 19" Staggered Wheel Set - Anthracite

2X Entries Into Our F80 M3 Sweepstakes

T#:599185

Part#: ARC81985ET35ANKT

Back Ordered

$ 1,756.00 USD

Add to Wish List

Qty

$ 1,756.00 USD

Add to Wish List

Specifications: Color - Anthracite Size Front - 19x8.5" ET35 Size Rear - 19x9.5" ET33

APEX EC-7 18x9.5" ET35 Square Track Wheel Set

2X Entries Into Our F80 M3 Sweepstakes

T#:387026

Part#: EC7189535X4

Ships in 2 Business Days

Starting at $ 1,636.00 USD

Add to Wish List

Starting at $ 1,636.00 USD

Add to Wish List

Apex EC-7 18x9.5" ET35 Wheel Set Apex 9.5" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

APEX EC-7 18" Square Wheel Set - Anthracite

2X Entries Into Our F80 M3 Sweepstakes

T#:386933

Part#: EC7189314A

Ships on Dec 23, 2026

$ 1,596.00 USD

Add to Wish List

Qty

$ 1,596.00 USD

Add to Wish List

Specifications: Color - Anthracite Size - 18x9" ET31

18" APEX ARC-8 Staggered Wheel Set

2X Entries Into Our F80 M3 Sweepstakes

T#:19428680

Part#: ARC818995ST

Ships in 10 Business Days

Starting at $ 1,576.00 USD

Add to Wish List

Starting at $ 1,576.00 USD

Add to Wish List

Apex ARC8 18x9" ET30/18x9.5" ET35 Wheel Set Apex 9"/9.5" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

18" VS5RS APEX Square Wheel Set

2X Entries Into Our F80 M3 Sweepstakes

T#:19428670

Part#: VS5RS181025SQ

Ships in 5 Business Days

Starting at $ 2,824.00 USD

Add to Wish List

Starting at $ 2,824.00 USD

Add to Wish List

Apex VS5RS 18x10" ET25 Wheel Set Apex 10" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

APEX EC-7 19x9.5" ET22 Satin Black Wheel 22.9lbs

2X Entries Into Our F80 M3 Sweepstakes

T#:201362

Part#: EC71995ET22SMBK

Ships in 5 Business Days

$ 459.00 USD

Add to Wish List

Qty

$ 459.00 USD

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x9.5"
Offset (mm):	22
Weight (lbs):	22.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 17x9" ET30 Matte Bronze Wheel 16.55lbs

2X Entries Into Our F80 M3 Sweepstakes

T#:637215

Part#: ARC8179ET30MBZ

Special Order: No Guaranteed ETA

$ 339.00 USD

Add to Wish List

Qty

$ 339.00 USD

Add to Wish List

APEX ARC-8 19" Staggered Wheel Set - Satin Black

2X Entries Into Our F80 M3 Sweepstakes

T#:599190

Part#: ARC819105ET22KT2

Ships on Nov 13, 2026

$ 1,814.00 USD

Add to Wish List

Qty

$ 1,814.00 USD

Add to Wish List

Specifications: Color - Satin Black Size Front - 19x9.5" ET22 Size Rear - 19x10.5" ET22

18" Style RGR Wheels - Staggered Set Of Four

T#:26038591

Part#: RG734HDSKKT1

In Stock at Vendor

$ 4,840.00 USD

Add to Wish List

Qty

$ 4,840.00 USD

Add to Wish List

19" CH-R Wheels - Square Set Of Four

T#:558644

Part#: CH129SPOKT

Ships on Oct 21, 2026

$ 3,371.99 USD

Add to Wish List

Qty

$ 3,371.99 USD

Add to Wish List

19" BBS CI-R Nurburgring Edition - Staggered Set

T#:5484812

Part#: CI2402NEKT

Ships on Oct 21, 2026

$ 3,907.99 USD

Add to Wish List

Qty

$ 3,907.99 USD

Add to Wish List

BBS has been engineering true high performance wheels for more than 50 years. Over the past 50 years, BBS wheels have won over 250 series Championships, ranging from F1, Touring Cars, Prototypes, Silhouette, Open-wheel, World Rally Championships, Hillclimb and Motorcycles. We understand what it takes to engineer wheels and technologies that can not only compete, but can win Championships. Since BBS produces OE wheels for many manufacturers including companies like BMW, Ferrari and Porsche, we understand the true performance requirements along with the proper load rating, tolerances and durability specifications. If your looking for the ultimate wheel for your BMW, BBS should be the first wheel that comes to mind. Gain the performance and status that comes along with BBS wheels. One Piece Counter Pressure Cast Wheel with Flow-formed rim - Back-milled spoke area - Featuring stainless steel rim protector - Weight optimized by FEM analysis. Staggered set of BBS CI-R Wheels - Nurburgring Edition Satin Black with Red Lip ring Front - 19x8.5 ET35 72.5 CB FPS Rings Rear - 19x9.5 ET40 72.5 CB FPS Rings

Show More Show Less

19" BBS CI-R Bronze - Staggered Set

T#:5484813

Part#: CI2402MBZKT

Ships on Oct 21, 2026

$ 3,907.99 USD

Add to Wish List

Qty

$ 3,907.99 USD

Add to Wish List

BBS has been engineering true high performance wheels for more than 50 years. Over the past 50 years, BBS wheels have won over 250 series Championships, ranging from F1, Touring Cars, Prototypes, Silhouette, Open-wheel, World Rally Championships, Hillclimb and Motorcycles. We understand what it takes to engineer wheels and technologies that can not only compete, but can win Championships. Since BBS produces OE wheels for many manufacturers including companies like BMW, Ferrari and Porsche, we understand the true performance requirements along with the proper load rating, tolerances and durability specifications. If your looking for the ultimate wheel for your BMW, BBS should be the first wheel that comes to mind. Gain the performance and status that comes along with BBS wheels. One Piece Counter Pressure Cast Wheel with Flow-formed rim - Back-milled spoke area - Featuring stainless steel rim protector - Weight optimized by FEM analysis. Staggered set of BBS CI-R Wheels - Bronze Front - 19x8.5 ET35 72.5 CB FPS Rings Rear - 19x9.5 ET40 72.5 CB FPS Rings

Show More Show Less

19" BBS CH-R Wheels - Set Of Four

T#:26204926

Part#: CH129TIPOKT

Ships on Oct 21, 2026

$ 3,371.99 USD

Add to Wish List

Qty

$ 3,371.99 USD

Add to Wish List

Alzor Style 881 Square Wheel Set - Silver - 18x8.5" ET35

10X Entries Into Our F80 M3 Sweepstakes

T#:586098

Part#: 88111KT

Ships in 5 Business Days

Sale - Save 25% $ 1,166.99

This product was last offered at the strikethrough price on
05-02-2026

$ 875.01 USD

Add to Wish List

Qty

Sale - Save 25%

$ 1,166.99

This product was last offered at the strikethrough price on
05-02-2026

$ 875.01 USD

Add to Wish List

Looking to improve the look of your BMW but don't want to put a massive hole in your bank account? Alzor wheels are the perfect option! With multiple styles and sizes to choose from, you can dial in the look you want! Alzor wheels are designed to fit most BMWs without major modifications. Wheel Spacers may be required for an optimal flush or stock-style fitment depending on your model.

Show More Show Less

19" Style 7108 Wheels - Staggered Set Of Four

10X Entries Into Our F80 M3 Sweepstakes

T#:37757259

Part#: 7108-3-STKT

Ships on Mar 8, 2027

Sale - Save 25% $ 1,300.00

This product was last offered at the strikethrough price on
05-03-2026

$ 975.00 USD

Add to Wish List

Qty

Sale - Save 25%

$ 1,300.00

This product was last offered at the strikethrough price on
05-03-2026

$ 975.00 USD

Add to Wish List

Apex EC-7 18x8.5" ET35 Square Wheel Set

2X Entries Into Our F80 M3 Sweepstakes

T#:19329465

Part#: EC7188535SQ

Back Ordered

Starting at $ 1,556.00 USD

Add to Wish List

Starting at $ 1,556.00 USD

Add to Wish List

Apex EC-7 18x8.5" ET35 Wheel Set Apex 8.5" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

18" APEX ARC-8 Square Wheel Set

2X Entries Into Our F80 M3 Sweepstakes

T#:19395576

Part#: ARC818930SQ

Back Ordered

Starting at $ 1,596.00 USD

Add to Wish List

Starting at $ 1,596.00 USD

Add to Wish List

Apex ARC8 18x9" ET30 Wheel Set Apex 8.5" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

APEX ARC-8 17x8.5" ET40 Wheel Set

2X Entries Into Our F80 M3 Sweepstakes

T#:386923

Part#: ARC81785404

Ships in 3 Business Days

Starting at $ 1,356.00 USD

Add to Wish List

Starting at $ 1,356.00 USD

Add to Wish List

Apex ARC8 17x8.5" ET40 Square Wheel Set APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

18" APEX ML-10RT Forged Wheels - Staggered Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31788333

Part#: ML10181040120AKT

Back Ordered

$ 2,956.00 USD

Add to Wish List

Qty

$ 2,956.00 USD

Add to Wish List

V703/VB3-SS-1885-5120-72.6-ET35

T#:363829

Part#: V13406

Special Order: No Guaranteed ETA

$ 270.00 USD

Add to Wish List

Qty

$ 270.00 USD

Add to Wish List

APEX ARC-8 18x8.5"/9.0" Mild Staggered Wheel Set

2X Entries Into Our F80 M3 Sweepstakes

T#:386856

Part#: ARC818859ST

Back Ordered

Starting at $ 1,536.00 USD

Add to Wish List

Starting at $ 1,536.00 USD

Add to Wish List

Apex ARC8 18x8.5" ET38/18x9 ET42 Staggered Wheel Set APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

19" Style 703 Wheels - Staggered Set Of Four

10X Entries Into Our F80 M3 Sweepstakes

T#:37757256

Part#: 703-18-STKT

In Stock

Sale - Save 25% $ 1,300.00

This product was last offered at the strikethrough price on
05-03-2026

$ 975.00 USD

Add to Wish List

Qty

Sale - Save 25%

$ 1,300.00

This product was last offered at the strikethrough price on
05-03-2026

$ 975.00 USD

Add to Wish List

19" APEX SM-10 Staggered Wheel Set

2X Entries Into Our F80 M3 Sweepstakes

T#:19428700

Part#: SM10198595ST

Back Ordered

Starting at $ 1,936.00 USD

Add to Wish List

Starting at $ 1,936.00 USD

Add to Wish List

Upgrade your BMW with APEX wheels, renowned for their superior strength and lightweight construction achieved through the innovative Flow-formed semi-forging process. These wheels boast an impressive average weight reduction of 10lbs or more, enhancing performance by reducing unsprung weight. Engineered with spacious spoke and barrel design, they provide ample room for brake systems while maintaining a classic motorsports aesthetic that perfectly complements the aggressive BMW style. With APEX wheels, your BMW will not only look its best but also perform with confidence on the road.

Enhanced strength and lightweight performance
Innovative Flow-formed semi-forging process
Average weight reduction of 10lbs or more
Ample room for brake systems
Classic motorsports design matches BMW's aggressive style

Show More Show Less

17" APEX ARC-8 Staggered Wheel Set

2X Entries Into Our F80 M3 Sweepstakes

T#:19428671

Part#: ARC817859ST

Ships on Oct 30, 2026

Starting at $ 1,336.00 USD

Add to Wish List

Starting at $ 1,336.00 USD

Add to Wish List

Apex ARC8 17x8.5" ET40/17x9 ET42 Staggered Wheel Set APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

18" APEX ARC-8RT Staggered Wheel Set - Choose Your Finish!

2X Entries Into Our F80 M3 Sweepstakes

T#:40342921

Part#: ARC8RT1899535

Back Ordered

Starting at $ 2,696.00 USD

Add to Wish List

Starting at $ 2,696.00 USD

Add to Wish List

Apex ARC-8RT 18x9" ET30 & 18x9.5" ET35 Staggered Wheel Set Introducing the Apex ARC-8RT, part of our Touring Line of forged wheels. A timeless classic, reborn as a fully forged wheel. Fully forged 6061-T6 aluminum Reinforced Sprint™ spec inner lip Stronger, yet thinner spokes Deeper concave profile Improved brake clearance OEM center cap compatibility Unmatched replacement program Lifetime structural warranty Independently tested *Aftermarket wheels above stock sizes may require certain amounts of fitment modification to prevent damage to the wheel or interior wheel well components. Fender rolling, spacers, or camber adjustment may be necessary for perfect fitment.

Show More Show Less

Alzor 17" Style 5011 Wheel Cover - Silver - Right - Priced Each ...

10X Entries Into Our F80 M3 Sweepstakes

T#:53644231

Part#: 5011-SIL-R

In Stock

$ 20.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 20.99 USD

Limited Qty Sale

Add to Wish List

Styled after the legendary "Throwing Star" wheel design found on the E34 BMW M5, the Style 5011 from Alzor features a gloss black center, a machined finished lip, and a removable plastic cover in directional left and right side designs. The "Throwing Star" covers are securely held on by five socket head hex bolts from the inside of each spoke to deter theft and prevent runaway covers.

This listing is for one replacement right side cover in silver.

Show More Show Less

17" Style 5004 Wheels - Alzor Set Of Four

10X Entries Into Our F80 M3 Sweepstakes

T#:28371196

Part#: 5004-11KT

In Stock

Sale - Save 25% $ 1,043.32

This product was last offered at the strikethrough price on
05-03-2026

$ 782.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 1,043.32

This product was last offered at the strikethrough price on
05-03-2026

$ 782.49 USD

Add to Wish List

Upgrade Your BMW with 17" Style 5004 Wheels - Set Of Four

Enhance the appearance of your BMW
High-quality construction ensures durability
Designed to fit BMW vehicles perfectly
Easy installation process

Transform the look of your BMW with the 17" Style 5004 Wheels - Set Of Four. These wheels are crafted to provide a sleek and stylish appearance, elevating the overall aesthetic of your BMW. Made with high-quality materials, they are built to last and withstand the rigors of everyday driving. Designed to fit BMW vehicles perfectly, these wheels offer a seamless integration with your vehicle's existing components. Plus, the installation process is quick and easy, allowing you to enjoy your new wheels in no time.

Show More Show Less

20" Tekniform Style 006 Wheel & Tire Package - 255/30R20 Tires ...

T#:25971884

Part#: 006-17ABEA

In Stock

Sale - Save 20% $ 3,468.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,775.19 USD

Add to Wish List

Qty

Sale - Save 20%

$ 3,468.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,775.19 USD

Add to Wish List

Alzor 17" Style 5011 Wheel Cover - Grey - Left - Priced Each ...

10X Entries Into Our F80 M3 Sweepstakes

T#:53644234

Part#: 5011-GRY-L

In Stock

$ 20.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 20.99 USD

Limited Qty Sale

Add to Wish List

Styled after the legendary "Throwing Star" wheel design found on the E34 BMW M5, the Style 5011 from Alzor features a gloss black center, a machined finished lip, and a removable plastic cover in directional left and right side designs. The "Throwing Star" covers are securely held on by five socket head hex bolts from the inside of each spoke to deter theft and prevent runaway covers.

This listing is for one replacement left side cover in grey.

Show More Show Less

19" Style LM Wheels - Staggered Set Of Four

T#:403173

Part#: LMDSPK19SKT

In Stock at Vendor

$ 6,899.00 USD

Add to Wish List

Qty

$ 6,899.00 USD

Add to Wish List

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

LM wheels consist of a pressure cast wheel surface and a flow formed rim structure. Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Diamond Silver with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling/pulling.

Specs:

19x8.5 ET32 - qty 2
19x9.5 ET32 - qty 2
Diamond Silver with a diamond cut lip
Center Bore: PFS
Bolt Pattern: 5x120

Show More Show Less

20" Tekniform Style 006 Wheel & Tire Package - 255/30R20 Tires ...

T#:25971889

Part#: 006-18PBTA

In Stock

Sale - Save 20% $ 3,468.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,775.19 USD

Add to Wish List

Qty

Sale - Save 20%

$ 3,468.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,775.19 USD

Add to Wish List

Tekniform Style 006 Hyper Silver

Diameter: 20" Width: 9" Offset: +30mm Center Bore: 72.6mm Bolt Pattern: 5x120 Pirelli P Zero Run-Flat (PZ4) Tires

Size: 255/30R20 Treadwear: 560 AA A

Show More Show Less

19" BBS CI-R Wheels - Staggered Set Of Four

T#:26305060

Part#: CI2302PSPOKT1

In Stock at Vendor

$ 3,317.99 USD

Add to Wish List

Qty

$ 3,317.99 USD

Add to Wish List

Alzor Style M205 Square Wheel Set - Hyper Silver - 19x9.5" ET35 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:639548

Part#: M205-5KT

In Stock

Sale - Save 25% $ 1,300.00

This product was last offered at the strikethrough price on
05-03-2026

$ 975.00 USD

Add to Wish List

Qty

Sale - Save 25%

$ 1,300.00

This product was last offered at the strikethrough price on
05-03-2026

$ 975.00 USD

Add to Wish List

Looking to improve the look of your BMW but don't want to put a massive hole in your bank account? Alzor wheels are the perfect option! With multiple styles and sizes to choose from, you can dial in the look you want! Alzor wheels are designed to fit most BMWs without major modifications. Wheel Spacers may be required for an optimal flush or stock-style fitment depending on your model.

Show More Show Less

18" BBS XR Wheels - Set Of Four

T#:26005271

Part#: XR0102PGKT

Ships on Oct 21, 2026

$ 1,789.00 USD

Add to Wish List

Qty

$ 1,789.00 USD

Add to Wish List

Alzor 17" Style 5011 Wheel Cover - Black - Right - Priced Each ...

10X Entries Into Our F80 M3 Sweepstakes

T#:53644235

Part#: 5011-BLK-R

In Stock

$ 27.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 27.99 USD

Limited Qty Sale

Add to Wish List

Styled after the legendary "Throwing Star" wheel design found on the E34 BMW M5, the Style 5011 from Alzor features a gloss black center, a machined finished lip, and a removable plastic cover in directional left and right side designs. The "Throwing Star" covers are securely held on by five socket head hex bolts from the inside of each spoke to deter theft and prevent runaway covers.

This listing is for one replacement right side cover in black.

Show More Show Less

17" BBS XR Wheels - Set Of Four

T#:26471670

Part#: XR0407BGKT

Ships on Oct 21, 2026

$ 1,549.00

This product was last offered at the strikethrough price on
09-29-2026

$ 1,499.99 USD

Add to Wish List

Qty

$ 1,499.99 USD

Add to Wish List

Discover the pinnacle of style and performance with BBS XR wheels, a premium option renowned for their sleek design and high-performance characteristics. Boasting a distinctive multi-spoke design, the XR wheels offer a modern and sporty aesthetic that perfectly complements a wide range of vehicles, including BMWs. Crafted using advanced manufacturing techniques and top-quality materials like forged aluminum alloy, these wheels strike a perfect balance between lightweight construction and exceptional strength, enhancing both the appearance and handling of vehicles. Embraced by automotive enthusiasts, the XR series caters to those seeking to elevate the performance and style of their cars. With their innovative design and precision engineering, BBS XR wheels are the ultimate choice for enhancing the overall look and performance of vehicles.

Sleek design enhances vehicle aesthetics
Lightweight construction improves handling and fuel efficiency
Exceptional strength ensures durability and reliability
Modern multi-spoke design adds a sporty touch

Specs:

Size: 17"x7.5"
Offset: 32mm
Center Bore: PFS - Includes Set of Four PFS to 72.5mm PFS Rings & Clips
Bolt Pattern: 5x120
Color: Gloss Black

Show More Show Less

20" Tekniform Style 006 - Set

T#:11628154

Part#: 006-18KT

In Stock

Sale - Save 25% $ 1,337.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,000.00 USD

Add to Wish List

Qty

Sale - Save 25%

$ 1,337.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,000.00 USD

Add to Wish List

20" Tekniform Style 006 - Set wheels are the ideal choice for car enthusiasts who demand both style and performance. Designed for those who push their vehicles to the limit on both the street and track, these wheels offer a superior balance between weight, durability, and cost. Manufactured using a rotary forming process, these wheels provide the lightweight and strength benefits of forged wheels without the high price tag.

The Tekniform Style 006 wheels are constructed to withstand rigorous conditions while maintaining an attractive appearance. They feature a hyper silver finish, engraved billet center caps, and are engineered to fit perfectly with a 5x120 bolt pattern. Each wheel is 20"x9.0" with a 30mm offset and a center bore of 74.1mm, including hub-centric rings for perfect fitment.

Lightweight Design: Rotary forming process ensures reduced weight and increased durability.
Durable Construction: Offers a balance of strength and cost-effectiveness.
Attractive Finish: Hyper silver color with engraved billet center caps.
Perfect Fitment: 20"x9.0" size with a 30mm offset and 5x120 bolt pattern.
Includes Hub-Centric Rings: Comes with 74.1mm to 72.6mm hub-centric rings for precise fitment.

Show More Show Less

20" Tekniform Style 006 Wheel & Tire Package - 255/30R20 Tires ...

T#:25971887

Part#: 006-17PBTA

In Stock

Sale - Save 20% $ 3,468.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,775.19 USD

Add to Wish List

Qty

Sale - Save 20%

$ 3,468.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,775.19 USD

Add to Wish List

Tekniform Style 006 Matte Gunmetal

Diameter: 20" Width: 9" Offset: +30mm Center Bore: 72.6mm Bolt Pattern: 5x120 Pirelli P Zero Run-Flat (PZ4) Tires

Size: 255/30R20 Treadwear: 560 AA A

Show More Show Less

Alzor 19" Style 030 Wheels - Square Set Of Four

10X Entries Into Our F80 M3 Sweepstakes

T#:376898

Part#: 030-3KT

In Stock

Sale - Save 40% $ 1,300.00

This product was last offered at the strikethrough price on
05-02-2026

$ 779.99 USD

Add to Wish List

Qty

Sale - Save 40%

$ 1,300.00

This product was last offered at the strikethrough price on
05-02-2026

$ 779.99 USD

Add to Wish List

Enhance your BMW or MINI's aesthetic appeal with the Alzor Style 030 wheels, offering a competitive edge and head-turning style. Featuring a sleek split-spoke design and mesh face, these wheels elevate your car's appearance and ensure attention as you drive by. Engineered for hassle-free installation, these wheels seamlessly fit your vehicle without any modifications.

For an extreme and personalized appearance, explore our vast selection of ECS Tuning wheel spacers and lug bolts to achieve the perfect look for your vehicle.

Wheel size: 19x8.5" ET35
72.6mm center bore
5x120 bolt pattern
Split spoke mesh design with a concave face
Hyper silver finish
TPMS compatible
Utilizes factory conical seat bolts
Wheel weight: 28.3lbs
64.5mm center cap

Alzor wheels adhere to stringent VIA certification and meet JWL technical standards, ensuring exceptional quality, performance, and safety.

Show More Show Less

18" APEX ML-10RT Forged Wheels (9"/10") Staggered Set Of Four - Gloss...

2X Entries Into Our F80 M3 Sweepstakes

T#:31788329

Part#: ML10181040120GKT

In Stock

$ 2,956.00 USD

Add to Wish List

Qty

$ 2,956.00 USD

Add to Wish List

x2 ML-10RT Forged Wheel (18x9 ET30 5x120 72.56CB) - Machined Lip Gloss Motorsport Gold
x2 ML-10RT Forged Wheel (18x10 ET40 5x120 72.56CB) - Machined Lip Gloss Motorsport Gold

19" Style 030 Wheels - Square Set Of Four

10X Entries Into Our F80 M3 Sweepstakes

T#:50934414

Part#: 030-8KT

In Stock

Sale - Save 25% $ 1,300.00

This product was last offered at the strikethrough price on
05-02-2026

$ 975.00 USD

Add to Wish List

Qty

Sale - Save 25%

$ 1,300.00

This product was last offered at the strikethrough price on
05-02-2026

$ 975.00 USD

Add to Wish List

The Alzor Style 030 features a deep concave, split-spoke mesh design built to turn heads in the paddock and dominate the street

20" Tekniform Style 006 Wheel & Tire Package - 255/30R20 Tires ...

T#:25971888

Part#: 006-18ABEA

In Stock

Sale - Save 20% $ 3,468.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,775.19 USD

Add to Wish List

Qty

Sale - Save 20%

$ 3,468.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,775.19 USD

Add to Wish List

Alzor 19" Style 758 Wheels - Square Set Of Four

10X Entries Into Our F80 M3 Sweepstakes

T#:23748109

Part#: 758-2KT

In Stock

Sale - Save 25% $ 1,300.00

This product was last offered at the strikethrough price on
05-03-2026

$ 975.00 USD

Add to Wish List

Qty

Sale - Save 25%

$ 1,300.00

This product was last offered at the strikethrough price on
05-03-2026

$ 975.00 USD

Add to Wish List

Enhance your BMW's performance and appearance with the Alzor Style 758 wheels. Featuring a split-spoke, mesh face design with a machined finish face and black inner barrel, these wheels provide a sleek look that turns heads as you drive. Engineered to seamlessly bolt onto your car without modifications, they offer a hassle-free installation experience.

Benefits:

Sleek split-spoke mesh design for an eye-catching appearance
Easy bolt-on fitment without modifications
Compatibility with ECS Tuning wheel spacers and lug bolts for extreme customization
High-quality construction meeting VIA certified JWL technical standards
TPMS compatible with a factory conical seat bolt design

Show More Show Less

19" APEX VS-5 Staggered Wheel Set - Choose Your Finish!

2X Entries Into Our F80 M3 Sweepstakes

T#:40545967

Part#: VS519995

Ships in 5 Business Days

Starting at $ 2,056.00 USD

Add to Wish List

Starting at $ 2,056.00 USD

Add to Wish List

APEX VS-5 19x9" ET30 & 19x9.5" ET22 Staggered Wheel Set VS-5 maximizes the performance potential of a flow-formed wheel. It combines features typically only found on forged wheels with a premium look at an unbeatable price. Features: Iconic 5-Spoke Design Side-Milled Spokes for Reduced Weight Reinforced Inner Lip for Strength Massive Brake Clearance Ultra-Concave Face Profiles Independently Tested and Certified Unmatched Replacement Program Lifetime Structural Warranty The VS-5 brings the aggressive look of our iconic forged VS-5RS to a flow-formed wheel. At a fraction of the price of its forged sibling, VS-5 punches well above its weight and maximizes the performance potential of a flow-formed wheel. With nearly two decades of experience perfecting track-ready flow-formed wheels, we engineered the VS-5 to deliver Real Performance at an unbeatable value. With a strength-to-weight ratio and features typically reserved for forged wheels, the VS-5 pushes the boundaries of flow-formed manufacturing to the max. Weighing only ~2-2.5 lbs more than its forged sibling, the VS-5 isn’t just a top tier option in the flow-formed space, it’s a wheel we consider the last step in performance before leveling up to a forged design. Flow-forming enables us to create high-performance wheels without the price premium of forging. It improves the mechanical properties and grain structure of the barrel, increasing its strength and stiffness, which allows us to use less material and reduce weight. Thanks to our superior engineering, our flow-formed wheels have a higher load rating than some competitors' forged wheels. A critical part of VS-5’s remarkable weight-savings, side-milled spokes also help with its stunning looks. The VS-5 features advanced side-milled spokes that have any excess material that doesn’t add strength removed from the sides of the spokes via precision CNC ball cutter. This process is often deemed cost-prohibitive by others, but for performance without compromise, we believe it's essential. The inner lip is the most vulnerable part of a wheel because it has no spokes for support. Our flow-formed Evolution Line adds more material to this vulnerable area as an added layer of protection against impact from track berms, potholes, and whatever else the road may throw at you.

Show More Show Less

18" BBS SX Wheels - Set Of Four

T#:26005261

Part#: SX0102SKKT

Ships on Oct 21, 2026

$ 1,689.00

This product was last offered at the strikethrough price on
07-02-2026

$ 1,637.99 USD

Add to Wish List

Qty

$ 1,637.99 USD

Add to Wish List

APEX EC-7 18x10" ET33 Race Silver Wheel 22.50lbs -PROFILE 2

2X Entries Into Our F80 M3 Sweepstakes

T#:180724

Part#: EC71810ET33RS

Ships in 5 Business Days

$ 419.00 USD

Add to Wish List

Qty

$ 419.00 USD

Add to Wish List

18x10" ET33 Race Silver APEX EC-7 Wheel 22.50lbs

Wheel Specs
Fitment:	Rear
Size:	18x10.0"
Offset (mm):	33
Weight (lbs):	22.5
Profile:	2, moderate dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

18" SM-10RS APEX Square Wheel Set

2X Entries Into Our F80 M3 Sweepstakes

T#:19428669

Part#: SM1RS1810254SQ

Ships in 5 Business Days

Starting at $ 2,916.00 USD

Add to Wish List

Starting at $ 2,916.00 USD

Add to Wish List

Apex SM-10RS 18x10" ET25 Wheel Set Apex 10" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

APEX ARC-8 18x9.5" ET22 Square Track Wheel Set

2X Entries Into Our F80 M3 Sweepstakes

T#:387296

Part#: ARC8189522SET

Ships in 5 Business Days

Starting at $ 1,596.00 USD

Add to Wish List

Starting at $ 1,596.00 USD

Add to Wish List

If you're tracking your BMW you should absolutely have stickier rubber on wider wheels. Most BMWs have a staggered wheel set with a narrow front wheel that results in understeer. Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. Square wheel sets of the same size and offset also allow you to rotate tires around to get the most life out of pricey track tires. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

Project Cars

SELECT YOUR BMW

High Performance BMW Wheel Upgrades for BMW 3 Series E91 (2006-2012)

Sub-Categories

Upgrade Your BMW with 17" Style 5004 Wheels - Set Of Four

Specs:

Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results