The intake boot is a regular issue especially for BMW's, nearly all vehicles have a boot manufactured from rubber with an accordion section in the design for flexibility. This flexible section is typically where the failure comes from, leading to vacuum leak engine codes, rough idle, and increase fuel consumption. 

When you upgrade to a Turner silicone intake boot you get a perfect fit that will not only outlast the OE design (meaning any vacuum leaks and rough idle), while also smoothing out airflow within the intake tract. This boot also eliminates the factory intake resonator giving your engine a much more aggressive sound under the hood especially at higher rpm. Available in black or Turner blue color, our intake boot offers either a pop of color or a cohesive, complementary look in your engine bay.

The Turner Motorsport silicone intake boot is manufactured with 5 layers of wire reinforced silicone to prevent collapse under load. Engineered in-house utilizing 3D scanning technology, this boot offers perfect fitment with the factory air box and either single stage or three stage (high output N52) intake manifolds.

Install as a standalone reliability improvement or in addition to our three stage intake manifold and Turner performance tune (available here).

Replaces OE intake boot 13717536004.

Features:

• 5 layers of wire reinforced silicone
• Perfect fitment with factory airbox
• Compatible with single stage or three stage manifold
• Installation hardware included

This item fits the following BMWs:
2008-2013 E82 E88 BMW 128i Coupe Convertible
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi - Coupe
2007-2013 E93 BMW 328i - Convertible

Bring your aFe filter back to life with a Restore kit from aFe. Included is filter cleaner & replacement oil. These air filter oils is designed to not harm MAF sensors, while allowing the filter to catch as much debris as possible.

Used for Pro 5 R filters

This Stage 2 cold air intake system produces 12 max horsepower, 16 lbs. x ft. torque and out-flowed the factory intake by 56%. This system includes a durable powder-coated heat shield and features a washable/reusable conical Pro 5R air filter for maximum flow. This air filter is constructed with 100% polyurethane, for long life and multiple cleaning cycles. A huge one-piece mandrel bent wrinkle-black powder-coated intake tube, maximizes air velocity providing maximum performance and throttle response. This is a direct bolt-on kit and requires no cutting or drilling.

This part fits the following BMWs:
2008-2013 E82/88 128i
2006 E90/91 325i/xi
2006 E90/91/92/93 330i/xi
2007-2013 E90/91/92/93 328i/xi
 

Ensure optimal engine performance with the replacement of your vacuum system hoses. The vacuum system plays a crucial role in the engine's functionality, transforming it into an efficient pump that influences air-fuel mixture and combustion. Damaged vacuum hoses can lead to various performance issues, from rough idle to difficulties starting the engine. If you're experiencing these issues, it's time to upgrade to this plastic hose with a 2.3mm inner diameter. The hose is black, arrives in an 8-foot section, and can be easily cut to the desired size for a perfect fit.

Key Features:

• Engine Optimization: Replacing old hoses ensures the vacuum system operates at peak performance.
• 2.3mm Inner Diameter: Designed to meet specific engine requirements.
• Black Color: Blends seamlessly with the engine components.
• 8-Foot Section: Provides flexibility to cut the hose to the required length.
• Easy Installation: Upgrade without hassle for improved engine efficiency.

Upgrade your vacuum system with this high-quality plastic hose, addressing performance issues and ensuring your engine runs smoothly.

For optimal performance, consider the 46.5mm To 61.0mm Silicone Coupler.

Engineered with durability and functionality in mind, this silicone coupler provides a reliable connection for various components in your vehicle's intake or cooling system. Its smooth interior surface promotes efficient airflow, while its flexible and reinforced construction ensures a secure fit and prevents leaks. Enjoy hassle-free installation and enhanced performance with this premium silicone coupler.

• Durable silicone construction
• Smooth interior surface for efficient airflow
• Flexible and reinforced design prevents leaks
• Secure fit for reliable performance
• Hassle-free installation

Since 1999, aFe (Advanced FLOW Engineering) has been developing and manufacturing high quality accessories in their facility in Corona, California. Starting with air filters and intake systems, and now expanding into exhaust systems, suspension components, tuning modules, and more, aFe products are a great way to improve the performance of your BMW without altering its fundamental character. Owned by a BMW enthusiast, aFe power is recognized the world over as a leader in quality performance products for your BMW.

• Constructed with 100% polyurethane
• Two layers of progressively finer mesh synthetic media
• Washable and reusable for multiple cleaning cycles
• Excellent dust-holding capacity for a longer service cycle between cleanings
• Integrated urethane bump seal insures a tight, no leak seal
• Outflows stock paper filter for improved horsepower and torque

This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:

E90 E92 E93 3 series: 325i 325Xi 328i 328Xi 330i 330Xi 2006+

E82 1 Series: 128i 2008+

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

AFE Summer Rebate Form

This Stage 2 cold air intake system produces 12 max horsepower, 16 lbs. x ft. torque and out-flowed the factory intake by 56%. This system includes a durable powder-coated heat shield and features a washable/reusable conical Pro 5R air filter for maximum flow. This air filter is constructed with 100% polyurethane, for long life and multiple cleaning cycles. A huge one-piece mandrel bent wrinkle-black powder-coated intake tube, maximizes air velocity providing maximum performance and throttle response. This is a direct bolt-on kit and requires no cutting or drilling.

This is a short ram intake and filter kit that will go in place of the restrictive and unattractive factory airbox. Feel a dramatic boost to throttle response and build boost faster by eliminating restrictions and widening the intake track. The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System.

In 1999 Injen designed the first urethane filter with a built-in velocity stack for added performance. The Injen Technology Research and Development Team calculates each filters mesh and pleat count for each specific application during the development stages. Today the state-of-the-art Ea nano-fiber Injen/AMSOIL performance dry filter provides reliable performance and requires NO OIL. Both Injen Air Filters allow cleaning and durability for 1000's of miles to come.

Features:
Powdercoated heat shield
Polished short ram tubing
+11hp/10ftlbs.

Kit Includes:
Short ram intake piping
Heat shield 
SuperNano Dry Web Dry Filters
Mounting hardware
Instructions

This part fits the following BMWs:
2007-2011 BMW 328I (E90/92/93) 
2008-2013 BMW 128I (E82/88) 
2006 BMW 325I AND 330I (E90) 

When changing over to the Euro air box, you want to ensure you are still getting the best air flow possible through the filter. This K&N filter is our best recommendation for increased flow and power!

K&N's air filters allow increased airflow - dirt and particles stick to the oil on these filters, making them more effective than traditional paper filters in terms of protection. Additionally, K&N believes their filters are more efficient than paper filers - this means more oxygen getting into the engine, allowing vaporized fuel to burn more efficiently and increasing horsepower and fuel economy. The best of both worlds!

• Covered by the K&N Million Mile Limited Warranty
• Washable and reusable
• Emissions legal in all 50 states
• Will not void vehicle warranty

Unleash the roar of your N52 engine with the Turner Motorsport E9x N52 Muffler & Resonator Delete Kit. Elevate your driving experience by transforming your exhaust with this cost-effective kit, providing performance gains, a captivating exhaust note, and stunning exhaust tips. Shedding the heavy factory muffler, Turner's T304 stainless steel 3.0" tubing replaces it, delivering a lighter, high-flow solution compatible with the OEM rear valance. Easy to install with hand tools, this muffler delete adds a powerful sound without significant drone, while shaving off about 20lbs from your vehicle. Upgrade your N52 without replacing the entire exhaust system!

Key Features:

• Turner designed Muffler & Resonator Delete for N52 engine
• T304 stainless steel construction with 1.25mm wall thickness
• CNC mandrel-bent 3.0" tubing for optimal exhaust gas routing
• Tig-welded exhaust hangers for direct fitment
• Hand-Tig welded joints for durability
• Stainless steel Accuseal exhaust clamps for a leak-proof seal
• Large radius bends ensure smooth transitions for optimal flow

Kit Includes:

• Y-pipe section
• Tailpipe section
• Dual 3.0" exhaust tips (Black Chrome finish)
• Stainless steel Accuseal exhaust clamps

See and hear the difference on the ECS YouTube page.

3" To 2.5" Silicone Coupler 3" Length

Enhance the performance and durability of your BMW or MINI with the 3" To 2.5" Silicone Coupler 3" Length. This silicone coupler provides a reliable connection between components, ensuring optimal airflow and reducing the risk of leaks. Engineered for durability and heat resistance, it withstands high temperatures and harsh conditions. Upgrade your BMW or MINI with this premium silicone coupler for improved performance.

• Reliable connection for optimal airflow
• Reduces the risk of leaks for enhanced performance
• Engineered for durability and heat resistance
• Fits both BMW and MINI models