BMW 7 Series F01 (2009+)

AeroCatch Racing Hood and Body Panel Fasteners (Pair) - Better than h...

T#:340098

Part#: AEROCATCH

In Stock

$ 566.99

This product was last offered at the strikethrough price on
05-13-2026

Starting at $ 82.99 USD

Add to Wish List

Starting at $ 82.99 USD

Add to Wish List

As used by Turner Motorsport on our championship winning BMW race cars, the new aerodynamically efficient and aesthetically styled AeroCatch is setting new standards in hood fixing for the 21st century. Say goodbye to your standard hood pins -- these are better all around.

Show More Show Less

BMS Pedal Tuner - N52, N54, N55

T#:586269

Part#: BMSPBT

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA

Show More Show Less

Spal Universal 16" Low Profile Electric Fan

T#:583648

Part#: 30100400

Back Ordered

$ 111.99 USD

Add to Wish List

Qty

$ 111.99 USD

Add to Wish List

Low profile design makes an easy fit when clearance is an issue. 1300 CFM.

Spal Electric Fan Harness with Relay - 185 Degree Switch

T#:598892

Part#: 185FH

Back Ordered

11% off MSRP $ 193.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 171.99 USD

Add to Wish List

Qty

11% off MSRP

$ 193.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 171.99 USD

Add to Wish List

SPAL® electric fan wiring harness kits are a must-have when installing electric fans. Designed to safely integrate with OEM wiring, the SPAL kits feature a waterproof relay along with printed wires which aid in installation. The wiring kits also feature stainless steel switches with optional switched override capability, fuse holder, and wiring connectors. Features: Makes installation of your new fan a breeze Designed to safely integrate with OEM wiring Feature a waterproof 10/40 amp relay with printed wires for easy installation Kit features a 3/8” NPT thermos-switch and a 3/8” to ½” NPT adapter Harness is designed for 12V systems only

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis & ...

T#:598298

Part#: JB4-SPWCK-F

In Stock

$ 159.00 USD

Add to Wish List

Qty

$ 159.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.

Show More Show Less

BMS N54 3.0L BOV Vacuum Adapter

T#:589529

Part#: N54BOVVACADPT2

In Stock

$ 79.00 USD

Add to Wish List

Qty

$ 79.00 USD

Add to Wish List

Upgrade your BMW's performance with the BMS N54 BOV Vacuum Adapter, a plug-and-play solution that enhances engine vacuum functionality. Easily attachable to the throttle body/brake booster vacuum line, this adapter provides two extra 1/8" NPT vacuum ports, offering versatile applications like replacing vacuum lines to diverter valves, connecting boost gauges, and more.

Quick and hassle-free installation
Two additional 1/8" NPT vacuum ports for multiple applications
Ideal for replacing engine vacuum lines to diverter valves
Enables a larger diameter boost reference to aftermarket BOV
Perfect for adding extra boost gauges and accessories
CNC machined for precise fit and durability
Dual internal O-rings and retaining clip for a secure, factory-like seal
Basic kit includes adapter, two 1/8" NPT caps, and one 1/8" vacuum nipple
BOV kit adds two push lock fittings and 1/4" line for Tial BOV installation
Made in the USA for quality assurance

Enhance your BMW's performance and functionality with the BMS N54 BOV Vacuum Adapter – a versatile, plug-and-play solution made in the USA.

Show More Show Less

MINI Universal 16" Electric Fan - Black

T#:376582

Part#: 30102049

Ships in 1-2 days

$ 207.99 USD

Add to Wish List

Qty

$ 207.99 USD

Add to Wish List

For BMW owners seeking enhanced airflow or tighter engine compartment clearance, Turner Motorsport presents a Universal Fan. Ideal for applications like aftermarket turbo setups, this fan ensures optimal cooling performance. Please note that this fan is universal and may require modification to fit your specific application. Crafted in Italy, this fan boasts dimensions of 16.30in x 15.75in x 3.47in and provides an airflow of 2024 CFM.

Enhanced airflow for improved engine cooling
Ideal for applications with tight tolerances, such as aftermarket turbo setups
Universal design allows for versatile installation
Crafted in Italy for quality assurance
Compact size with powerful airflow capacity

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...

For use with older E chassis BMW JB4 systems with the square plastic case.

T#:403194

Part#: JB4-BT

Ships in 1-2 days

$ 149.00

This product was last offered at the strikethrough price on
05-13-2026

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real-time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it into the JB4 where your BMS DATA cable connects, attach the power and ground wire to the JB4 harness using the included connectors, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS, or Android® and sold separately via the Apple® or Android® app store on your phone. This adapter is not compatible with the JB4 windows interface.

Show More Show Less

Universal 16" Electric puller Fan - Black

T#:598821

Part#: 30101516

Ships in 2 Business Days

11% off MSRP $ 168.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 149.99 USD

Add to Wish List

Qty

11% off MSRP

$ 168.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 149.99 USD

Add to Wish List

1469 CFM. High performance puller fan with straight blades. This is a universal fan for applications that require more air flow or for engine compartments that have tight tolerances such as an aftermarket turbo set up that needs more clearance. This fan is universal and you must make it fit your application. It is not a direct bolt on. Made in Italy. Size: 16.3in x 15.75in x 2.48in Airflow (CFM): 1469

Show More Show Less

Universal BMW Jack Pad Red - Set Of 4

T#:9803960

Part#: BMWJACKPADRED4

Ships in 2 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
Prevents damage to rocker panels or vehicle undercarriage
Made from solid billet aluminum for durability
Engraved Burger Motorsports logo for authenticity
Honeycomb grip pattern for stability during use

Show More Show Less

Spal Universal 16" Electric Fan - Black

T#:583649

Part#: 30102048

In Stock at Vendor

$ 207.99 USD

Add to Wish List

Qty

$ 207.99 USD

Add to Wish List

Universal fan that allows increased cooling capacity and shroudless design. 1959 CFM.

Universal 12" Electric puller Fan - Black

T#:598801

Part#: 30100375

In Stock

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

861 CFM. High performance puller fan with straight blades. This is a universal fan for applications that require more air flow or for engine compartments that have tight tolerances such as an aftermarket turbo set up that needs more clearance. This fan is universal and you must make it fit your application. It is not a direct bolt on. Made in Italy. Size: 13.25in x 12.5in x 2.2in Airflow (CFM): 861

Show More Show Less

Burger Motorsports JB4 Tuner - N63 Type-A Harness - BMW F-Chassis ...

For F-Chassis Vehicles w/ Type-A Harness Only; Not for sale or use in California

T#:600237

Part#: JB4-N63-F-A

Ships in 2 Business Days

$ 779.00

This product was last offered at the strikethrough price on
09-07-2026

$ 679.00 USD

Add to Wish List

Qty

$ 679.00 USD

Add to Wish List

The JB4 is the most advanced and highly featured tuning system available for your N63 powered vehicle. Power gains are up to 100whp and 140wtq on a stock car. The JB4 features a simple plug and play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in dash map switching between factory and various performance maps, optional in-dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built-in data logging, built-in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or REV3 mobile phone adapter. JB4 Features and Benefits Power gains of up to 100hp and 140tq to the wheels on a stock vehicle Improves 0-60 times and 1/4 mile times The JB4 offers a lot more performance, functionality, and safety than your average performance chip Quick Plug & Play Installation Includes the rugged JB4 billet aluminum enclosure for protection CANbus OBDII integration offering unrivaled tuning features and performance Improved performance over non-integrated chip tunes Runs as smoothly as stock, this is how your vehicle should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving Compatible with JB4 Mobile for smartphone logging, tuning changes, and adjustment 91 octane fuel or better required for performance gains Ethanol (E85) compatible tuning maps Able to read/delete fault codes Not VIN locked and can be removed without a trace and resold down the road Made in the USA Free USA Shipping 5 year warranty Note: For off-road racing use only. Not for sale or use in California.

Show More Show Less

Burger Motorsports JB4 Tuner - N63 Type-B Harness - BMW F-Chassis ...

For F-Chassis Vehicles w/ Type-B Harness Only; Not for sale or use in California

T#:600239

Part#: JB4-N63-F-B

Ships on Oct 27, 2026

$ 679.00 USD

Add to Wish List

Qty

$ 679.00 USD

Add to Wish List

The JB4 is the most advanced and highly featured tuning system available for your N63 powered vehicle. Power gains are up to 100whp and 140wtq on a stock car. The JB4 features a simple plug and play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in dash map switching between factory and various performance maps, optional in-dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built-in data logging, built-in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or REV3 mobile phone adapter. JB4 Features and Benefits Power gains of up to 100hp and 140tq to the wheels on a stock vehicle Improves 0-60 times and 1/4 mile times The JB4 offers a lot more performance, functionality, and safety than your average performance chip Quick Plug & Play Installation Includes the rugged JB4 billet aluminum enclosure for protection CANbus OBDII integration offering unrivaled tuning features and performance Improved performance over non-integrated chip tunes Runs as smoothly as stock, this is how your vehicle should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving Compatible with JB4 Mobile for smartphone logging, tuning changes, and adjustment 91 octane fuel or better required for performance gains Ethanol (E85) compatible tuning maps Able to read/delete fault codes Not VIN locked and can be removed without a trace and resold down the road Made in the USA Free USA Shipping 5 year warranty Note: For off-road racing use only. Not for sale or use in California.

Show More Show Less

BMW N54 N55 Oil Cooler Valve - Red Burger Motorsport Sport (4/2007+) ...

T#:588633

Part#: OILVALVE-RED

Ships in 2 Business Days

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

This simple engine oil cooler valve from Burger Motorsports increases flow to your fender mounted engine oil/air heat exchanger resulting in lower engine oil temperatures and more consistent performance during heavy throttle. Less restrictive than the spring-loaded units. Installs in minutes and is fully reversible. CNC machined for a precise fit and anodized for protection. Made in the USA. Requires BMW's external sport engine oil cooler which is standard on most 2008+ models, optional on 2007 E9x models. FEATURES AND BENEFITS Easily lower engine oil temperature Stock oil cooler will work more efficient More consistent performance CNC Machined for a perfect fit Made in USA

Show More Show Less

Universal 16" High performance Electric puller Fan - Black

T#:598818

Part#: 30102113

In Stock at Vendor

$ 257.99 USD

Add to Wish List

Qty

$ 257.99 USD

Add to Wish List

2467 CFM. High performance puller fan with curved blades. This is a universal fan for applications that require more air flow or for engine compartments that have tight tolerances such as an aftermarket turbo set up that needs more clearance. This fan is universal and you must make it fit your application. It is not a direct bolt on. Made in Italy. Size: 16.25in x 15.75in x 3.5in Airflow (CFM): 2467

Show More Show Less

Spal Electric Fan Harness with Relay

T#:2181323

Part#: FRH

Ships in 3 Business Days

12% off MSRP $ 112.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD

Add to Wish List

Qty

12% off MSRP

$ 112.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD

Add to Wish List

SPAL® electric fan relay wiring kits are designed to automatically turn on your SPAL® electric fan when the air conditioning is turned on. They can also be used when dual electric fans are installed using one switching device. Features: Makes installation of your new fan a breeze Designed to safely integrate with OEM wiring Feature a waterproof 10/40 amp relay with printed wires for easy installation Harness is designed for 12V systems only Does not included thermo-switch

Show More Show Less

Universal 12" Electric Puller Fan - Black

T#:598797

Part#: 30102029

In Stock

$ 207.99 USD

Add to Wish List

Qty

$ 207.99 USD

Add to Wish List

1328 CFM. High performance puller fan with curved blades. This is a universal fan for applications that require more air flow or for engine compartments that have tight tolerances such as an aftermarket turbo set up that needs more clearance. This fan is universal and you must make it fit your application. It is not a direct bolt on. Made in Italy. Size: 13.25in x 12.5in x 3.5n Airflow (CFM): 1328

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

AeroCatch Racing Hood and Body Panel Fasteners (Pair) - Better than h...

BMS Pedal Tuner - N52, N54, N55

Spal Universal 16" Low Profile Electric Fan

Spal Electric Fan Harness with Relay - 185 Degree Switch

JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis & ...

BMS N54 3.0L BOV Vacuum Adapter

MINI Universal 16" Electric Fan - Black

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...

Universal 16" Electric puller Fan - Black

Universal BMW Jack Pad Red - Set Of 4

Spal Universal 16" Electric Fan - Black

Universal 12" Electric puller Fan - Black

Burger Motorsports JB4 Tuner - N63 Type-A Harness - BMW F-Chassis ...

Burger Motorsports JB4 Tuner - N63 Type-B Harness - BMW F-Chassis ...

BMW N54 N55 Oil Cooler Valve - Red Burger Motorsport Sport (4/2007+) ...

Universal 16" High performance Electric puller Fan - Black

Spal Electric Fan Harness with Relay

Universal 12" Electric Puller Fan - Black

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results