BMW Maintenance & Tune-Up Parts for BMW 7 Series F01 (2009+)

K&P Engineering High Performance Stainless Steel Micronic Oil Filter ...

T#:402535

Part#: S38

Ships in 6 Business Days

$ 129.00 USD

Add to Wish List

Qty

$ 129.00 USD

Add to Wish List

Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!

The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.

K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top tier product for your European vehicle.

Features:

Consistent filtering across entire filter surface
Superior ASTMF316 filtration performance
Magnetic Prefiltering
Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
Easy inspection of engine contamination
Proven in Motorsports, Military and Aerospace applications for years. Technology is FAA approved for use in aircraft.

At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.

Watch to learn how to clean a K&P oil filter

This part fits the following BMWs:
2012+ F30 3 Series Sedan 328i 328iX 328i 328iX 335i 335iX
2006 - 2013 E9X 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2010 - 2016 F10 5 Series Sedan 528i 528iX 530i 535i 535iX
2003 - 2006 E60 Sedan 525i 525xi 530i 530xi
2007 - 2010 E60 528i 528xi 535i 535ix
2009 - 2016 E89 Z4 Roadster Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i
2014+ F22 2 Series Coupe 228i 228iX M235i M235iX
2007 - 2013 E88 1 Series Convertible 128i 135i
2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
2012 - 2013 E70 X5 xDrive35d X5 xDrive35i
2007 - 2011 E70 X5 3.0sd X5 3.0si

Show More Show Less

PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Brushed Finish - ...

T#:1002349

Part#: 228053410

Back Ordered

$ 314.99 USD

Add to Wish List

Qty

$ 314.99 USD

Add to Wish List

When servicing your ZF transmission, BMW recommends replacing your entire transmission pan and filter as the pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions! That's not all! To top it all off, this pan also includes a high-powered Neodymium magnet built into the drain plug, preventing metal contaminants from being cycled through your transmission and causing damage. Replaces Genuine BMW part number: 24118612901 Need a replacement filter? See T#1002351 Features: Cast-aluminum construction Increased heat dissipation External cooling fins reduce oil temps 1.0 Quart increased fluid capacity Includes replaceable filter Neodymium magnet equipped billet stainless pulls harmful ferrous metal contaminants from the fluid 1/8” NPT temperature probe access port Limited lifetime warranty. GASKET NOT INCLUDED

Show More Show Less

PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Raw Finish - BMW ...

T#:1002348

Part#: 228053400

Back Ordered

$ 296.99 USD

Add to Wish List

Qty

$ 296.99 USD

Add to Wish List

When servicing your ZF transmission, BMW recommends replacing your entire transmission pan and filter as the pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions! That's not all! To top it all off, this pan also includes a high-powered Neodymium magnet built into the drain plug, preventing metal contaminants from being cycled through your transmission and causing damage. Replaces Genuine BMW part number: 24118612901 Need a replacement filter? See T#1002351 Features: Cast-aluminum construction Increased heat dissipation External cooling fins reduce oil temps 1.0 Quart increased fluid capacity Includes replaceable filter Neodymium magnet equipped billet stainless pulls harmful ferrous metal contaminants from the fluid 1/8” NPT temperature probe access port Limited lifetime warranty. GASKET NOT INCLUDED

Show More Show Less

PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Black Finish - BM...

T#:1002350

Part#: 228053420

Back Ordered

$ 314.99 USD

Add to Wish List

Qty

$ 314.99 USD

Add to Wish List

When servicing your ZF transmission, BMW recommends replacing your entire transmission pan and filter as the pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions! That's not all! To top it all off, this pan also includes a high-powered Neodymium magnet built into the drain plug, preventing metal contaminants from being cycled through your transmission and causing damage. Replaces Genuine BMW part number: 24118612901 Need a replacement filter? See T#1002351 Features: Cast-aluminum construction Increased heat dissipation External cooling fins reduce oil temps 1.0 Quart increased fluid capacity Includes replaceable filter Neodymium magnet equipped billet stainless pulls harmful ferrous metal contaminants from the fluid 1/8” NPT temperature probe access port Limited lifetime warranty. GASKET NOT INCLUDED

Show More Show Less