BMW Suspension Parts for BMW 7 Series F01 (2009+)

Factory Pre-set Damping 

The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -

• Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
• Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
• Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
• TUV approved lowering range and operation,
• Expert engineering and design for ease-of-use and long durability,

This is the ideal coil over kit for a 5-series owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice. 

Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
Cars with the factory EDC electronic adjustable shocks must have the system disabled with the optional KW EDC Cancellation Kit (or similar). This is a direct fit for cars without EDC. 

Lifetime warranty! 

FREE FEDEX GROUND SHIPPING!
FREE FEDEX GROUND shipping within the 48 contiguous states. 

This item fits the following BMWs:
2011+ F10 BMw 528i 535i 550i
2009+ F01 BMW 740i 740li 750i 750li 
Not for cars with Adaptive Drive.

Adjustable Rebound Damping 

The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -

• Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
• Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
• Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
• TUV approved lowering range and operation,
• Expert engineering and design for ease-of-use and long durability,

This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride. 

Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. Not for cars with the factory EDC system. 

Lifetime warranty! 

FREE FEDEX GROUND SHIPPING!
FREE FEDEX GROUND shipping within the 48 contiguous states. 

This item fits the following BMWs:
2011+ F10 BMw 528i 535i 550i without EDC
2009+ F01 BMW 740i 740li 750i 750li 
Not for cars with Adaptive Drive.

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

• 12k Front & 4.5k Rear Spring Rate
• Linear front & V-Barrel rear springs
• Valved specifically to spring style and rate
• Aluminum and Rubber Front Mounts
• Aluminum and Rubber Rear Mounts
• Black Powder Coated Components
• All OE style brackets and mounting for perfect fit
• 30 Levels of Simultaneous Compression and Rebound Dampening
• 2 inch minimum and 3+ Inches of total potential drop
• Great for Track, Street, and any other conditions

Introducing the revolutionary Air Lift Performance 3H Height + Pressure Air Suspension Control System for BMW enthusiasts from Turner Motorsport. After three years of meticulous development and testing, Air Lift has created their most advanced product yet.

• Combines pressure-based control with ride-height sensing technology for enhanced performance
• Features a brilliant TFT color display for intuitive control and monitoring
• Mobile app compatibility allows for easy adjustment of ride height and system settings via Bluetooth
• State-of-the-art manifold with a 32-bit processor for precise control over all four corners of your BMW
• Improved height sensor arm design for increased durability and longevity
• Show mode feature enables height management while the vehicle is off

Kit Features:

• Height + Pressure 3/8" Manifold
• Air Lift Black Anodized Aluminum Display
• Fully Integrated Wiring Harness That Also Incorporates Compressor Power
• Necessary Fittings, Hardware, and Connectors For a Complete Install
• Air Lift Automatically Draining Water Trap
• 60ft of 3/8" Air Line
• 3H Includes Rotational Height Sensors, Wiring, and Linkages
• FREE Smart Phone App Which Works on Both iPhone and Android Integrated Into the Manifold, No Extra Module to Buy! Both Iphone and Android app are currently available

Dinan Performance Springs are matched to your BMW's chassis and suspension components to deliver better handling and looks without sacrificing ride quality. Dinan BMW springs are carefully engineered to work within your car's suspension travel and to improve suspension geometry. Spring rates are slightly stiffer than stock and dialed in to reduce bodyroll. A stiffer suspension makes the car more fun to drive and the lower ride height improves the looks by reducing wheel-fender gap.

Dinan spring specs -

• F: -1/2" (12mm)
  
• R: -1/2" (12mm)

Fitment note: When used with stock shocks the Dinan Ride Quality Kit is strongly recommended. The Kit consists of shorter and stiffer bump stops and spring perches that work better with the lowered ride height of these springs. While not explicitly required, less than favorable ride quality and handling may result without them.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The springs are worth 2 points towards your Dinan badge (Ride Quality Kit is worth 1 point).

This item fits the following BMWs:
2009+ F01 F02 BMW 750i 750Li 750iX 750LiX

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
2007 - 2011 E70 X5 3.0sd X5 3.0si x5 4.8i
2012 - 2013 E70 X5 xDrive35d X5 xDrive35i X5 xDrive50i
2008 - 2014 E71 X6 xDrive35i X6 xDrive50i
2008-2014 E71 X6M
 

Ensure optimal performance for your BMW's air suspension system with the reliable 444C Air Compressor. This compressor fills your supply tank efficiently, providing ample air to inflate your air bags and lift your suspension. With a 100% duty cycle and a rating of 200psi, this compressor offers uninterrupted operation and quick air inflation. Considered one of the best options available, it draws around 20 amps and weighs only 9.75 pounds each.

• 100% duty cycle for uninterrupted operation
• Rated at 200psi for quick air tank filling
• Draws around 20 amps for efficient performance
• Lightweight design at only 9.75 pounds each

Upgrade your BMW's air suspension system with the 444C Dual Pack Compressors from Turner Motorsport. These compressors feature a newly-developed intercooler head and stainless steel braided leader hose for enhanced durability and performance. Ensure reliable air supply for your BMW's suspension system with this comprehensive kit.

• Newly-developed intercooler head for improved performance
• Stainless steel braided leader hose with inline check valve for compressor protection
• Complete kit includes all necessary components for installation
• Enhances durability and reliability of your BMW's air suspension system

Kit Features:

• (2) 444C Black Compressors
• Patents Pending Intercooler Head
• (2) Air Filter Assemblies
• (2) Remote Mount Brackets
• (2) Sets of Remote Mount Fittings
• (2) Sets of Spare Air Filter Elements
• (8) Sets of Nuts, Bolts, Washers and Lock Washers
• (2) Stainless Steel Braided Leader Hoses with Inline Check Valve
• (6) Airline Clips

*Does not include relays, pressure switch or air line for remote air filter relocation