BMW Suspension Parts for BMW 7 Series F01 (2009+)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:
BC Racing BR Series Coilover Suspension Kit - Extreme Low - BMW F02 7-Series (with OEM Air Ride)
BC Racing BR Series Coilover Suspension Kit - Extreme Low - BMW F02 7...
For Vehicles with OEM Air Ride
BC Racing - Corporate Logo
T#:4042163
Part#: I-93E-BR
Ships on Sep 11, 2026
$ 1,345.00 USD
Free Shipping
Add to Wish List
$ 1,345.00 USD
Free Shipping
Add to Wish List
The BC Racing BR Series offers the most affordable entry into coilover suspension without sacrificing performance, comfort, build quality, vehicle height, or handling. This is done by extensively testing each vehicle then refining the coilover characteristics as many times as needed to ensure the most well-balanced and affordable aftermarket suspension conceivable. BC Racing takes great pride in choosing spring rates for our off-the-shelf kits that strike the perfect balance between comfort and performance so you're never stuck with an oversprung suspension like many other brands sell. BC Racing offers one of the widest ranges of damping adjustment with 30-clicks of compression/rebound adjusted simultaneously on the BR Series. With meticulously chosen spring rates, damper valving, and one of the widest adjustment ranges in the industry, you can't go wrong with the BC Racing BR Series Coilover System.
Show More Show Less
BC Racing DS Series Coilover Kit - F02 w/OE Air Suspension
BC Racing DS Series Coilover Kit - F02 w/OE Air Suspension
For vehicles with OE air suspension
BC Racing - Corporate Logo
T#:598303
Part#: I-93-DS
Back Ordered
$ 1,395.00 USD
Free Shipping
Add to Wish List
$ 1,395.00 USD
Free Shipping
Add to Wish List
The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.
Show More Show Less
BC Racing BR Series Coilover Suspension Kit - BMW F02 7-Series (with OEM Air Ride)
BC Racing BR Series Coilover Suspension Kit - BMW F02 7-Series (with ...
For Vehicles with OEM Air Ride
BC Racing - Corporate Logo
T#:4042162
Part#: I-93-BR
Back Ordered
$ 1,195.00 USD
Free Shipping
Add to Wish List
$ 1,195.00 USD
Free Shipping
Add to Wish List
The BC Racing BR Series offers the most affordable entry into coilover suspension without sacrificing performance, comfort, build quality, vehicle height, or handling. This is done by extensively testing each vehicle then refining the coilover characteristics as many times as needed to ensure the most well-balanced and affordable aftermarket suspension conceivable. BC Racing takes great pride in choosing spring rates for our off-the-shelf kits that strike the perfect balance between comfort and performance so you're never stuck with an oversprung suspension like many other brands sell. BC Racing offers one of the widest ranges of damping adjustment with 30-clicks of compression/rebound adjusted simultaneously on the BR Series. With meticulously chosen spring rates, damper valving, and one of the widest adjustment ranges in the industry, you can't go wrong with the BC Racing BR Series Coilover System.
Show More Show Less
BC Racing DS Series Coilover Kit - F01 All Models w/o OE Air Suspension
BC Racing DS Series Coilover Kit - F01 All Models w/o OE Air Suspensi...
Not for vehicles with OE air suspension
BC Racing - Corporate Logo
T#:598301
Part#: I-73-DS
Back Ordered
$ 1,395.00 USD
Free Shipping
Add to Wish List
$ 1,395.00 USD
Free Shipping
Add to Wish List
The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.
Show More Show Less
BC Racing BR Series Coilover Suspension Kit - F01 740i 750i
BC Racing BR Series Coilover Suspension Kit - F01 740i 750i
For Vehicles without OEM Air Ride
BC Racing - Corporate Logo
T#:555816
Part#: I-73-BR
Back Ordered
$ 1,195.00 USD
Free Shipping
Add to Wish List
$ 1,195.00 USD
Free Shipping
Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

  • 12k Front & 4.5k Rear Spring Rate
  • Linear front & V-Barrel rear springs
  • Valved specifically to spring style and rate
  • Aluminum and Rubber Front Mounts
  • Aluminum and Rubber Rear Mounts
  • Black Powder Coated Components
  • All OE style brackets and mounting for perfect fit
  • 30 Levels of Simultaneous Compression and Rebound Dampening
  • 2 inch minimum and 3+ Inches of total potential drop
  • Great for Track, Street, and any other conditions
Show More Show Less
BC Racing Rear Damping Adjustment Extenders - BR Type
BC Racing Rear Damping Adjustment Extenders - BR Type
BC Racing - Corporate Logo
T#:555864
Part#: DMP-EXT
In Stock
$ 39.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 39.99 USD
Free Shipping on orders $49 and up
Add to Wish List
The rear damping adjuster on coilovers is usually hidden under a bunch of hard to reach interior panels requiring you to remove carpet, panels and sometimes even the rear seat back in order to adjust the dampening on your BC rear coilovers. The BC Racing rear extender adjuster allow you to make these adjustments without removing the rear interior. Simple make two small holes in the interior above the adjuster and the extension can be passed through the interior panels. Now the adjustments can be performed from above.
Show More Show Less
Powerflex Rear Differential Rear Mount Bushing - F07/F10
Powerflex Rear Differential Rear Mount Bushing - F07/F10
Powerflex - Corporate Logo
T#:638068
Part#: PFR5-6031
In Stock
$ 69.99 USD
Free Shipping
Add to Wish List
$ 69.99 USD
Free Shipping
Add to Wish List
As a direct replacement for the OE rubber bushings, these new bushings reduce movement in the differential preventing the commonly experienced rear-end transmission 'thud' while offering improved performance and durability. Replaces OE Part Number: 33316797238 & 33316792872
Show More Show Less
Powerflex Rear Differential Front Mount Bushings - F07/F10
Powerflex Rear Differential Front Mount Bushings - F07/F10
Powerflex - Corporate Logo
T#:638069
Part#: PFR5-6032
In Stock
$ 110.99 USD
Free Shipping
Add to Wish List
$ 110.99 USD
Free Shipping
Add to Wish List
As a direct replacement for the OE rubber bushings, these new bushings reduce movement in the differential preventing the commonly experienced rear-end transmission 'thud' while offering improved performance and durability. Replaces OE Part Number: 33316792873
Show More Show Less
BMW F0X / F1X / F7X / F85 Powerflex Performance Polyurethane Front Sway Bar - PFF5-1404
BMW F0X / F1X / F7X / F85 Powerflex Performance Polyurethane Front Sw...
Powerflex - Corporate Logo
T#:379908
Part#: PFF5-1404X2
In Stock
$ 69.99 USD
Free Shipping
Add to Wish List
$ 69.99 USD
Free Shipping
Add to Wish List
When it comes to your vehicle's performance and stability, the choice of front sway bar bushings matters. OEM front sway bar bushings are typically crafted from rubber or softer materials, which, over time, can deteriorate, especially under heavy loads and harsh driving conditions. This degradation can result in subframe movement and diminished stability. With Powerflex Performance Street front sway bar bushings you get: Enhanced Stability and Handling Precision: Powerflex Front Sway Bar Bushings are designed to provide a significant improvement in stability and handling precision for your BMW. By reducing unwanted sway bar movement, these bushings contribute to a more controlled and secure driving experience. Whether you're navigating tight corners or maneuvering through challenging road conditions, you'll notice a marked improvement in your vehicle's stability. Improved Ride Comfort: While enhancing stability and handling, Powerflex bushings also contribute to improved ride comfort. They help minimize body roll during cornering, resulting in a smoother and more comfortable ride for both daily commuting and spirited driving. You can expect reduced body movements and a more composed driving experience. Durability and Longevity: Crafted from high-quality materials, Powerflex Front Sway Bar Bushings are engineered for durability and longevity. They are designed to withstand the rigors of daily driving, ensuring long-lasting performance. With these bushings in place, you can trust that your BMW's sway bar remains secure and stable over the long term, reducing the need for frequent replacements. Noise and Vibration Reduction: Powerflex bushings excel at dampening unwanted noises and vibrations, enhancing overall driving comfort. This reduction in cabin noise contributes to a quieter and more serene driving environment, allowing you to enjoy a more pleasant journey. OE / OEM Cross Reference Numbers: 37116771932 Fits these BMW models: F07 - 535i, 535i xDrive, 550i, 550i xDrive F10 - 535d, 535d xDrive, 535i, 535i xDrive, 550i, 550i xDrive F06 - 640i, 640i xDrive, 650i, 650i xDrive, Alpina B6 xDrive F12 - 640i, 640i xDrive, 650i, 650i xDrive F13 - 640i, 640i xDrive, 650i , 650i xDrive F01 - 740i, 750i, 750i xDrive, Alpina B7, Alpina B7 xDrive F02 - 740Ld xDrive, 740Li, 740Li xDrive, 750Li, 750Li xDrive, 750LiX F15 - X5 xDrive35d, X5 xDrive35i, X5 xDrive50i F85 - X5 M E71 - X6 35iX, X650iX, X6 M F16 - X6 xDrive35i, X6 xDrive50i E70 - X5, X5 M, X5 xDrive30i, X5 xDrive35d, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i
Show More Show Less
Powerflex Front Upper Thrust Arm Inner Bushing - Street - F10 F06/13
Powerflex Front Upper Thrust Arm Inner Bushing - Street - F10 F06/13 ...
Powerflex - Corporate Logo
T#:591242
Part#: PFF5-6101
In Stock
$ 137.99 USD
Free Shipping
Add to Wish List
$ 137.99 USD
Free Shipping
Add to Wish List
Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more than it should. You get sloppy steering, vibrations, and poor handling which makes the car feel unstable. These urethane bushings are stiffer than stock rubber and will not deflect as much. This helps keep the alignment in check with less variation. The car feels more planted and confidence-inspiring. And a lifetime warranty means you'll likely never have to pay for another bushing ever again!
Show More Show Less
BMW F10 / F06 / F13 / F01 / F02 - Powerflex Performance Rear Sway Bar Bushing - 14mm - PFR5-6013-14
BMW F10 / F06 / F13 / F01 / F02 - Powerflex Performance Rear Sway Bar...
Powerflex - Corporate Logo
T#:21604328
Part#: PFR5-6013-14
In Stock
$ 68.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 68.99 USD
Free Shipping on orders $49 and up
Add to Wish List
BMW F07 5 Series GT Front Control Arm Bushing - Street - PFF5-7001
BMW F07 5 Series GT Front Control Arm Bushing - Street - PFF5-7001 ...
Powerflex - Corporate Logo
T#:22163405
Part#: 31126775145
In Stock
$ 193.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 193.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Achieving optimal performance and handling for your BMW F07 5 Series GT is a top priority for automotive enthusiasts. Among the array of enhancements available, the Powerflex BMW F07 5 Series GT Front Control Arm Bushing takes the spotlight as a pivotal component designed to elevate your vehicle's control, handling, and road-holding capabilities. In this article, we'll delve into the numerous advantages of integrating these high-quality bushings into your BMW F07, providing a more confident and enjoyable driving experience. Enhanced Control and Handling: The BMW F07 5 Series GT is already renowned for its remarkable handling, and the Powerflex Front Control Arm Bushing takes this to the next level. These bushings effectively reduce sway, body roll, and unwanted suspension movement during cornering, ensuring your vehicle remains stable and responsive, even when navigating sharp turns and corners. This results in a more confident and enjoyable driving experience. Superior Cornering Performance: One of the key strengths of these control arm bushings is their ability to optimize your vehicle's cornering performance. The Powerflex design provides increased rigidity, enabling more precise and controlled cornering. Whether you're conquering winding mountain roads or enjoying spirited drives, you'll appreciate the improved grip and control these bushings deliver. Quieter, More Comfortable Ride: Powerflex BMW F07 5 Series GT Front Control Arm Bushing helps create a smoother and quieter driving experience. The high-quality materials and construction reduce vibrations and noise from the road, resulting in increased driving comfort. Durability and Longevity: These bushings are constructed with premium materials, ensuring durability and a long service life. They are designed to withstand the demands of daily driving and spirited performance, reducing wear and tear on your suspension components and extending the lifespan of your BMW's control arm system and related parts. OE / OEM Cross Reference Numbers: 31126775145
Show More Show Less
Front Upper Control Arm Bushings
Front Upper Control Arm Bushings
Powerflex - Corporate Logo
T#:641000
Part#: PFF5-6004
Ships in 1 Business Day
$ 177.99 USD
Free Shipping
Add to Wish List
$ 177.99 USD
Free Shipping
Add to Wish List
Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more than it should. You get sloppy steering, vibrations, and poor handling which makes the car feel unstable. These urethane bushings are stiffer than stock rubber and will not deflect as much. This helps keep the alignment in check with less variation. The car feels more planted and confidence-inspiring. And a lifetime warranty means you'll likely never have to pay for another bushing ever again! Powerflex polyurethane subframe bushings are firmer than OEM bushings, resulting in better handling, a more planted rear-end, and more efficient suspension articulation - all with minimal sacrifice to ride quality. Powerflex is the number one selling suspension bushing manufacturer in Europe. Their experience with polyurethane bushing material and state-of-the art manufacturing techniques allows them to produce premium performance bushings, made to exact-fit standards. Powerflex performance polyurethane bushings are built to last longer than OEM rubber bushings, while improving performance and allowing for a more engaging driving experience. Use of Powerflex Copper Grease PCG1 is recommended for ease of installation. Periodic reapplication is recommended to extend squeak-free service life of bushings. Powerflex is proud to offer a lifetime warranty to the original purchaser on all products.
Show More Show Less
Upper Spring Hats/Perches (Pair) - 2.25 Inch / 16mm Pin / Tapered Seat
Upper Spring Hats/Perches (Pair) - 2.25 Inch / 16mm Pin / Tapered Sea...
Turner Motorsport - Corporate Logo
T#:340476
Part#: TSU9980548
Ships on Dec 1, 2026
Sale - Save 25% $ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD
Free Shipping
Add to Wish List
Sale - Save 25%
$ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD
Free Shipping
Add to Wish List
These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.
Show More Show Less
Upper Spring Hats/Perches (Pair) - 2.25 Inch / 16mm Pin / Square Seat
Upper Spring Hats/Perches (Pair) - 2.25 Inch / 16mm Pin / Square Seat...
Turner Motorsport - Corporate Logo
T#:340477
Part#: TSU998062A
Ships on Dec 1, 2026
Sale - Save 25% $ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD
Free Shipping
Add to Wish List
Sale - Save 25%
$ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD
Free Shipping
Add to Wish List
These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.
Show More Show Less
Rod End Boot (14-18mm) - Priced Each
Rod End Boot (14-18mm) - Priced Each
Turner Motorsport - Corporate Logo
T#:599632
Part#: RERS3
In Stock
Sale - Save 43% $ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 16.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 43%
$ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 16.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Extend the life of your heim joints with this flexible rubber protective boot. Designed to fit 14mm–18mm spherical bearings and rod ends, it shields critical components from dirt, moisture, and road debris. Keeping contaminants out helps ensure consistent performance and reduces wear over time.
Show More Show Less
Powerflex Silicone Grease
Powerflex Silicone Grease
Powerflex - Corporate Logo
T#:362715
Part#: PCG1
In Stock
$ 1.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 1.99 USD
Free Shipping on orders $49 and up
Add to Wish List
The Powerflex silicone grease is the only lubricant we suggest for long, squeak free operation. The lubricant contains silicone that resists heat and water and keeps a more constant viscosity to allow it to stay in the bushing as temperatures increase. The lubricant also does not lose it's lubrication properties over time like an anti-seize type lubricant. Each pack will lube 2 large bushings or 4 small.
Show More Show Less
Rear Sway Bar Bushing Set - 16mm - Street - BMW F10/F11
Rear Sway Bar Bushing Set - 16mm - Street - BMW F10/F11
Powerflex - Corporate Logo
T#:19560881
Part#: PFR5-6013-16
Ships in 1 Business Day
$ 68.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 68.99 USD
Free Shipping on orders $49 and up
Add to Wish List
For F07, some F10, F11, F12, F13 XDrive, F01, F02 and F04 with Standard Suspension, Check bar diameter or part numbers before ordering. OEM Part Number: 33556788630
PowerFlex Rear Sway Bar Bushing - 16mm - F01/02/04/07, F12/13
PowerFlex Rear Sway Bar Bushing - 16mm - F01/02/04/07, F12/13 ...
Powerflex - Corporate Logo
T#:53997752
Part#: PFR5-6013-16BLK
Ships in 1 Business Day
New Item
$ 76.99 USD
Add to Wish List
$ 76.99 USD
Add to Wish List
Factory rubber components are a liability. The Powerflex Black Series Rear Anti-Roll Bar Bushing is a track-ready, engineering-focused upgrade designed exclusively for competitive motorsport and high-performance track vehicles.
Show More Show Less
Rear Sway Bar Bushing - 15mm - F01/02/06/07, F10/12/13 - N55, N63
Rear Sway Bar Bushing - 15mm - F01/02/06/07, F10/12/13 - N55, N63 ...
Powerflex - Corporate Logo
T#:53997754
Part#: PFR5-6013-15
Ships in 1 Business Day
New Item
$ 68.99 USD
Add to Wish List
$ 68.99 USD
Add to Wish List
Factory rubber components are engineered for daily comfort, resulting in high compliance, unpredicted geometry changes, and a delayed chassis response under load.
Rear Sway Bar Bushing - 13mm - Street
Rear Sway Bar Bushing - 13mm - Street
Powerflex - Corporate Logo
T#:22163395
Part#: PFR5-6013-13
Ships in 1 Business Day
$ 68.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 68.99 USD
Free Shipping on orders $49 and up
Add to Wish List
When it comes to your vehicle's performance and stability, the choice of rear sway bar bushings matters. OEM rear sway bar bushings are typically crafted from rubber or softer materials, which, over time, can deteriorate, especially under heavy loads and harsh driving conditions. This degradation can result in subframe movement and diminished stability. Now, let's explore how upgrading to Powerflex 13mm Rear Sway Bar Bushings can transform your driving experience: Enhanced Handling and Control: Powerflex 13mm Rear Sway Bar Bushings elevate your vehicle's handling capabilities to a new level. Designed to enhance control and stability during tight turns and quick maneuvers, these bushings provide a tangible performance boost. Imagine confidently navigating curves as your car hugs the road, ensuring a secure and controlled ride. Reduced Body Roll: Say goodbye to the discomfort of excessive body roll during corners. Powerflex bushings diligently level out your car's body, resulting in a smoother and more comfortable ride. Regardless of road conditions, you'll relish the newfound stability and composure of your vehicle. Improved Grip: Whether you have a penchant for spirited driving or indulge in occasional track days, these robust bushings become your trusted companion. They anchor your rear tires firmly to the road, delivering exceptional traction. Whether accelerating out of a turn or maintaining a steady line, the enhanced grip instills confidence and puts a smile on your face. Sharper Steering Response: Bid farewell to sluggish steering. Powerflex's upgraded bushings refine your car's steering response, granting you more precise control. With quicker reactions to your steering inputs, you'll feel an immediate and direct connection with the road, akin to a perfectly choreographed dance. Elevate your driving experience with Powerflex 13mm Rear Sway Bar Bushings and enjoy a newfound level of handling, stability, and control. Upgrade your vehicle today and experience the difference. OE / OEM Cross Reference Numbers: OEM Part Number: 33556788861 Fits these BMW models: F10 - 528i, 535d, 535i, Active Hybrid 5, M5
Show More Show Less
Front Differential Input Seal Kit - E46, E53, E60, E61, F30
Front Differential Input Seal Kit - E46, E53, E60, E61, F30
Packaged by Turner - Corporate Logo
T#:41289766
Part#: 31521428678TKT
Back Ordered
$ 52.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 52.99 USD
Free Shipping on orders $49 and up
Add to Wish List
This kit comes with the seal and both dust covers needed to re-seal your vehicles input shaft on the front differential.

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Special Offers

Shipping