BMW Engine Parts for BMW 7 Series F01 (2009+)

N-Series Ultimate Performance Ignition Coil - Red - Set Of Six ...

T#:23714967

Part#: NSERIESIGNCOILKT

In Stock

$ 205.99 USD

Add to Wish List

Qty

$ 205.99 USD

Add to Wish List

Upgrade your BMW's engine performance with the Dinan Performance Ignition Coil Service Kit. These high-quality ignition coils are crafted to enhance ignition power, ensuring optimal engine performance and efficiency. Engineered for durability and reliability, these coils provide improved throttle response, smoother idle, and enhanced fuel efficiency. Benefit from the Dinan Performance Ignition Coil Service Kit, designed to unleash the true potential of your BMW's engine.

Show More Show Less

BMS N54 Upgraded Replacement PCV Valve For BMW

T#:38587650

Part#: N54PCVVR

In Stock

$ 40.00 USD

Add to Wish List

Qty

$ 40.00 USD

Add to Wish List

The BMS N54 Upgraded Replacement PCV Valve is a high-performance upgrade designed to enhance crankcase ventilation and minimize excessive blow-by in BMW N54 engines. Unlike the stock PCV valve, which can degrade over time and lead to oil consumption or boost leaks, this upgraded version provides superior sealing and long-term durability. ### Key Features: - **Direct-Fit Replacement** – Designed for an exact fit, ensuring hassle-free installation. - **Optimized Ventilation** – Improves crankcase pressure management, reducing oil blow-by and deposits. - **Enhanced Durability** – Constructed from premium materials to withstand high-boost applications and prolonged use. - **Boost Leak Prevention** – Delivers a tighter seal than the factory valve, preventing power loss. - **Ideal for Tuned Engines** – A critical upgrade for N54-powered vehicles running increased boost levels. Upgrade your N54’s crankcase ventilation system with the BMS Upgraded PCV Valve to ensure maximum performance, reliability, and engine longevity.

Show More Show Less

Billet Oil Filter Cap

T#:21045489

Part#: BMS-OFC

In Stock

Starting at $ 89.00 USD

Add to Wish List

Starting at $ 89.00 USD

Add to Wish List

The Burger Motorsports V2 billet aluminum oil filter cover is a metal upgrade that directly replaces your weak OE plastic cap for greater protection, better cooling, ease of removal/install, and looks great under the hood. The built-in 21mm hex and a 3/8" drive socket wrench fitting that does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter cage. Anodized for protection. This quality part is a must for any serious BMW owner. Replaces OEM part number 11427525334 - BMW Oil filter cover. Features and Benefits Solid aluminum design is much stronger than brittle plastic 21mm hex head + 3/8" drive socket wrench fitting Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter cage and o-ring Anodized for protection Looks great under the hood Made in the USA

Show More Show Less

VANOS Solenoid Valve Kit - N52 N54 3.0L

T#:25805743

Part#: 11367585425TKT

In Stock

Sale - Save 25% $ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.55 USD

Add to Wish List

Qty

Sale - Save 25%

$ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.55 USD

Add to Wish List

Failed solenoid valves can lead to numerous issues, such as sluggish acceleration, rough idle, loss of power, limp mode, and check engine lights. Luckily, these issues are easily fixed with our budget-friendly VANOS Solenoid Valve Kit. This kit contains two URO brand VANOS Solenoids, two sets of OEM Elring gaskets, and two Genuine BMW mounting bolts, all for less than the price of a single Genuine BMW Solenoid.

Show More Show Less

Ultimate Turbo Coolant Line Kit - BMW F01/02 F07/10 F06/12/13 N63 4.4...

T#:21702986

Part#: F0XF1XCOOLANTKT

Ships Today

Sale - Save 23% $ 273.89

This product was last offered at the strikethrough price on
05-03-2026

$ 210.61 USD

Add to Wish List

Qty

Sale - Save 23%

$ 273.89

This product was last offered at the strikethrough price on
05-03-2026

$ 210.61 USD

Add to Wish List

Elevate your F0X / F1X turbocharger performance and reliability with the Packaged by Turner Kit, meticulously designed to cater to your needs. Benefit from Enhanced Turbocharger Functionality: Improved Cooling: Our Turbocharger Coolant Supply and Return Lines are engineered to enhance coolant circulation, effectively regulating turbocharger temperatures for optimal performance. Precision Fit: Included gasket rings and hose clamps guarantee a snug and secure fit, preventing leaks and ensuring the longevity of your turbocharger system. Enhanced Reliability: By preventing coolant leaks and maintaining consistent temperatures, our kit promotes the reliability and durability of your turbocharger system, ultimately extending its lifespan. Kit Includes: Turbocharger Coolant Return Line - Cylinders 1-4 Turbocharger Coolant Supply Line - Cylinders 1-4 Turbocharger Coolant Return Line - Cylinders 5-8 Turbocharger Coolant Supply Line - Cylinders 5-8 8 Gasket Ring 3 Hose Clamp This kit fits these BMW models: F01/F02 - 750i, 750Li F06/F12/F13 - 650i F07/F10 - 550i

Show More Show Less

Port Injector Plugs

T#:27171925

Part#: UNI-BMS-PIPLUGS

In Stock

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.

Show More Show Less

Spark Plug Gapper Tool BMS Billet

T#:26404907

Part#: 12MMSPG

In Stock

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

AAE Remanufactured High Pressure Fuel Pump - BMW N54 N55 3.0L ...

T#:42200953

Part#: 13517616170RKT

In Stock

$ 807.99

This product was last offered at the strikethrough price on
03-04-2026

$ 806.99 USD

Add to Wish List

Qty

$ 806.99 USD

Add to Wish List

This is the updated high pressure fuel pump for BMW's with the N54 or N55 turbo engine. The high-pressure fuel pump is a known weak point on the N54 and N55 engines and can cause limp mode or even leave you stranded if it fails. This is the latest and most current version of the fuel pump offered. Common symptoms of a failing pump include rough idle, engine misfires, sudden loss of power, or failure to start. If your vehicle still has an earlier revision of the pump, especially if it's modified or will be in the future, this is a worthwhile upgrade for improved reliability. Included in the retail price is a refundable $130 core charge.

Show More Show Less

N54 Valve Cover Upgrade Kit - BMW N54 3.0L

T#:25772568

Part#: 11127565284MTKT

In Stock

Sale - Save 23% $ 547.99

This product was last offered at the strikethrough price on
05-03-2026

$ 419.23 USD

Add to Wish List

Qty

Sale - Save 23%

$ 547.99

This product was last offered at the strikethrough price on
05-03-2026

$ 419.23 USD

Add to Wish List

The stock plastic valve cover from BMW tends to warp and crack over time due to numerous heat cycles. This leads to oil and vacuum leaks that both make a mess and negatively affect performance and reliability. Replace your stock valve cover with this aluminum upgrade from Bremmen Parts to eliminate these issues! The aluminum construction results in a significantly stronger valve cover that won't warp or crack. This kit contains everything you need to upgrade your cover, including the upgraded aluminum valve cover, valve cover gasket, oil cap, and hardware. Additionally, we've also included a new PCV blow-by hose and a Vargas PCV upgrade for additional reliability! This is especially important for tuned vehicles with upgraded turbos.

Show More Show Less

TurboSmart OPR V2 Oil Pressure Regulator

T#:28504207

Part#: TS-0811-0012

In Stock

10% off MSRP $ 189.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 170.99 USD

Add to Wish List

Qty

10% off MSRP

$ 189.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 170.99 USD

Add to Wish List

Introducing Turbosmart’s OPR V2 Turbocharger Oil Pressure Regulator, a cutting-edge solution launched in 2022 that ensures steady oil pressure for your turbocharger. This innovative regulator features a return-less design with an integrated 44 Micron Stainless Steel Mesh Oil Filter, providing robust performance and protection.

The OPR V2 is the first of its kind, utilizing Turbosmart’s proprietary flow control method to maintain optimal oil pressure regardless of engine oil variables like pressure or temperature. It guarantees a smooth oil flow to your turbocharger, safeguarding critical components such as Exhaust Drive, Back & Charge Pressures from excessive oil pressure that could lead to oil consumption and smoke.

Gone are the days of guesswork with restrictors and complex plumbing for oil pressure regulation. The OPR V2 simplifies the process with its return-less, inline installation and the convenience of a built-in 44 Micron Oil Filter. This filter, made of serviceable and replaceable Stainless Steel Mesh, adds an extra layer of defense against engine oil debris that could harm your turbocharger.

Key Features:

Innovative Patent Pending Design Durable Aluminium (6262 T6) Anodised Body & Valve Regulated Oil Pressure Compatible with Most turbochargers Integrated Stainless Steel (304) Mesh Oil Filter -4AN Inlet and Outlet for easy installation 1/8 NPT Sensor/Gauge Port for monitoring Directional Inlet Feed Logic for optimized performance Laminar Flow Output for consistent oil delivery Compatible with all Engine Oils Designed and Manufactured in Australia

Show More Show Less

Wastegate Repair Kit - N54

T#:41863724

Part#: 116575857456TKT

Ships on Aug 6, 2026

$ 164.99 USD

Add to Wish List

Qty

$ 164.99 USD

Add to Wish List

Get rid of that annoying N54 Wastegate Rattle for good!

AutoTecknic Dry Carbon Competition Oil Cap Cover - Type 1 - For Vario...

T#:39971047

Part#: BM-0007

In Stock

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.

Billet Spark Plug Gapper Tool - 14mm - BMS

T#:583132

Part#: BMSBSPGT14MM

Ships in 7 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

Precisely gaps spark plugs for enhanced engine performance and efficiency
Speeds up the gapping process while ensuring accuracy and uniformity
Available in two sizes (14mm and 12mm) for a wider range of compatibility
Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
Made in the USA for premium quality and durability

Show More Show Less

Improved Racing BMW Oil Cooler Thermostat (180F)

T#:27171935

Part#: IRTHERM

Back Ordered

Starting at $ 318.99 USD

Add to Wish List

Starting at $ 318.99 USD

Add to Wish List

Precise Oil Temperature Control for Your BMW Upgrade your BMW N20, N26, N51, N52, N53, N54, N55, and S55 engine's oil temperature control with Improved Racing's high-performance oil cooler adapter. Designed to address flaws in the factory's restrictive oil cooler adapter and faulty internal flow control valve, this upgrade ensures precise oil temperature control. Improved Racing's thermostat provides quick engine warmup, prevents overcooling, and delivers full oil cooling capacity on demand. Trusted by professional race teams around the globe, Improved Racing's thermostats have proven highly reliable, are backed by a lifetime warranty, and are made in the USA. Option to Use the Factory Oil Cooler and Lines The optional factory oil line adapter allows you to use the factory oil cooler lines for a simple, plug-and-play installation. For maximum performance, the factory oil cooler and lines may be replaced with an aftermarket cooler and AN lines using the AN adapter fittings (-10AN line size is recommended). Please note that some applications, such as most BMW SUV's, use a water-to-oil heat exchangers. These applications require plugging the coolant supply and return ports, as well as adding an external air-to-oil cooler and lines (factory or aftermarket). Please note the Oil cooler adapter cannot be used without an oil cooler.

Show More Show Less

Coolant Port Block Off Plugs for N54 Single Turbo Conversion ...

For use with converted single turbo N54 engines

T#:23880741

Part#: N54STCCPBO

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

If you're installing a single turbo kit on your N54-powered BMW, you'll need to block off the two coolant ports on the exhaust side of the engine block. This kit contains high-quality billet aluminum plugs for both the front and rear location factory coolant feed locations.

Show More Show Less

Turbo Oil Line Replacement Kit

T#:16175681

Part#: 114275770100KT

Ships in 3 Business Days

$ 775.99 USD

Add to Wish List

Qty

$ 775.99 USD

Add to Wish List

Replace leaking or damaged lines to ensure your turbos are well lubricated for long lasting life!

Top-Tier BMW N54/N55 Ignition Service Kit

T#:21670137

Part#: TMSN5SPCOILKT

In Stock

Sale - Save 13% $ 285.99

This product was last offered at the strikethrough price on
05-03-2026

$ 248.31 USD

Add to Wish List

Qty

Sale - Save 13%

$ 285.99

This product was last offered at the strikethrough price on
05-03-2026

$ 248.31 USD

Add to Wish List

Upgrade your BMW N54 and N55 engine with Packaged by Turner kits for optimized performance and fuel efficiency. Our BMW ignition coils feature specialized modifications to boost firepower, delivering increased torque at lower RPMs and more horsepower at higher RPMs. The extent of improvement depends on your engine's current condition, but you'll undoubtedly experience a noticeable difference in performance. Ensure your BMW's engine runs smoothly and efficiently with our comprehensive ignition service kit from ECS Tuning. This kit includes six Bav Auto ignition coils with plug boots, NGK spark plugs, American Grease Stick dielectric grease, and a BMW spark plug service indicator label. Rest assured with a 2-year warranty on all Bavarian Autosport brand parts. Upgrade your BMW N54 and N55 engine's ignition system today for a remarkable driving experience.

Show More Show Less

Blue WG38 Gen V Ultra-Gate 38 - 14PSI

T#:22591972

Part#: TS-0551-1011

In Stock

10% off MSRP $ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

Qty

10% off MSRP

$ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

The Gen V WG38 Ultra-Gate 38 external wastegate is your cost-effective, high-performance solution. This 38mm external wastegate is meticulously designed for hassle-free bolt-on applications that make use of the 2-bolt flange.

Show More Show Less

Oil Filter Housing Gasket Replacement Kit - BMW N54 N55 3.0L ...

T#:24344808

Part#: N54OFHGKT

In Stock

Sale - Save 4% $ 169.99

This product was last offered at the strikethrough price on
06-16-2026

$ 163.26 USD

Add to Wish List

Qty

Sale - Save 4%

$ 169.99

This product was last offered at the strikethrough price on
06-16-2026

$ 163.26 USD

Add to Wish List

If you have a leaking oil filter housing seal, why not replace it while doing an oil service? This kit includes an Oil service kit along with an oil filter housing gasket and thermostat housing gasket.

Show More Show Less

WPC-Treated Performance Rod Bearing Service Kit - N63 / S63

T#:36066266

Part#: 11247617338KT2

In Stock

Sale - Save 7% $ 1,035.99

This product was last offered at the strikethrough price on
05-03-2026

$ 963.37 USD

Add to Wish List

Qty

Sale - Save 7%

$ 1,035.99

This product was last offered at the strikethrough price on
05-03-2026

$ 963.37 USD

Add to Wish List

If your engine has higher mileage, don't neglect rod bearing replacement! These bearings are sandwiched between the connecting rod and crankshaft journal and are prone to failure due to overheating, lack of lubrication, or general wear. Replace your rod bearings and prevent a spun bearing.

Starting with ACL’s high-performance bearing shells, our Race Series bearings are built to withstand extreme RPMs and stress. Utilizing a "Duraglide" tri-metal construction and a high-strength overlay plate, these bearings offer superior oiling and heat resistance for high-RPM operation.

Our WPC-treated bearings take ACL’s already impressive design and enhance it even further. The WPC treatment process strengthens and smooths the bearing surface by firing high-speed, ultra-fine particles at the bearing shells, reducing friction and improving durability. This advanced surface treatment ensures smoother operation and improved heat dissipation, which are critical for any high-performance engine.

Kit includes

Turner Motorsport WPC-Treated Race Series Rod Bearing Shells (16) Genuine BMW Connecting Rod Bolts (16) Hardware for Oil Pan & Oil Sump Oil filter Liqui-Moly Molygen 5W-40 (6L) Drain Plug Turner Motorsport Oil Reminder Sticker Oil pan gasket RedLine assembly lube (4 oz.)

Show More Show Less

Burger Motorsports Turbo Double Baffle Oil Catch Can - F23 235i Conve...

T#:5567062

Part#: OCCN55-235VERT

Ships on Aug 6, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

It's no secret that BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Large 16mm+ inlet and outlet exceeds OEM PCV sizing Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)

Show More Show Less

Autel Autolink AL329

T#:2914116

Part#: AL329

Ships in 1 Business Day

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

OBDII Code Reader

Billet Oil Thermostat Lid

T#:21045480

Part#: BMS-TLID

Ships in 1-3 days

Starting at $ 39.00 USD

Add to Wish List

Starting at $ 39.00 USD

Add to Wish List

These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.

Show More Show Less

Blue Thermostat Caps (pair)

T#:54139632

Part#: BMS-TCP-BLU

Ships in 1 Business Day

$ 29.00 USD

Add to Wish List

Qty

$ 29.00 USD

Add to Wish List

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - F07/10 F06/12/...

For vehicles with dynamic or adaptive drive

T#:23482929

Part#: 8PK1478TKT

In Stock

Sale - Save 23% $ 167.99

This product was last offered at the strikethrough price on
05-03-2026

$ 129.72 USD

Add to Wish List

Qty

Sale - Save 23%

$ 167.99

This product was last offered at the strikethrough price on
05-03-2026

$ 129.72 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and new pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

Comprehensive Valve Cover Gasket Kit - N63/S63

T#:30164665

Part#: 11128648131KT2

Ships in 1-2 days

$ 150.99

This product was last offered at the strikethrough price on
04-06-2026

$ 145.99 USD

Add to Wish List

Qty

$ 145.99 USD

Add to Wish List

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Gasket Set - Left & Right High Pressure Fuel Pump Gasket (2) O-Ring Seals (6) Torx Screws (6) Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - BMW N63 S63 ...

T#:23516122

Part#: 11287631824TKT

In Stock

$ 220.99 USD

Add to Wish List

Qty

$ 220.99 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, replacement A/C belt, and a new tensioner. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

N54 Single Turbo Conversion Oil Fitting

For use with converted single turbo N54 engines

T#:23880740

Part#: N54STCOCF

Back Ordered

$ 25.00 USD

Add to Wish List

Qty

$ 25.00 USD

Add to Wish List

Planning a single turbo swap on your N54? To utilize a single turbo oil feed hose, you'll need an adapter that has threads. Fortunately, Burger Motorsports produces this high-quality CNC billet aluminum piece to provide seamless integration with the factory feed location.

Show More Show Less

Billet Upgraded Vacuum Cannisters

T#:21045535

Part#: BMS-N54VACANS

Back Ordered

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

N54 powered BMW vehicles have two of these tanks, one for each turbo. They accumulate and hold vacuum/air to be used on both turbos. The factory plastic N54 boost vacuum tanks tend to leak and cause problems. If vacuum can't be stored the wastegates will not function, leading to common low boost or overboost faults. We have the solution, the all-new heavy-duty BMS tanks. Specifically made for stock to high-boost N54 engines. Each tank is made from 100% aluminum and features two CNC machined aluminum end caps and are anodized black to complement your engine compartment. Featuring BMS logos, metal barbed vacuum fittings, and integrated brackets for solid mounting in the factory location. Not only do these look awesome under the hood, but they will also last forever. Replaces OEM BMW part #11652247620 Features & Benefits Full lightweight aluminum construction Heavy-duty upgrade Factory-like fit Sold in pairs Made in the USA

Show More Show Less

N63 Timing Chain Kit

For Vehicles Produced Between 2009-2013

T#:41863702

Part#: 11317594899T1KT

Back Ordered

Sale - Save 19% $ 787.68

This product was last offered at the strikethrough price on
05-03-2026

$ 639.08 USD

Add to Wish List

Qty

Sale - Save 19%

$ 787.68

This product was last offered at the strikethrough price on
05-03-2026

$ 639.08 USD

Add to Wish List

This BMW N63 Timing Chain Kit is a must-have for proactive maintenance or full engine service, giving owners peace of mind and performance confidence. Restore your BMW’s precision and protect your investment with this high-quality, cost-effective solution.

Show More Show Less

Oil Drain Plug

T#:41188174

Part#: 11137535106TKT

In Stock

Sale - Save 29% $ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.35 USD

Add to Wish List

Qty

Sale - Save 29%

$ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.35 USD

Add to Wish List

Includes a one time use crush washer.

Bosch Starter Motor With Hardware

T#:56110332

Part#: SR0492NKT4

In Stock

$ 261.99 USD

Add to Wish List

Qty

$ 261.99 USD

Add to Wish List

At the core is a brand-new Bosch Starter Motor, engineered to withstand extreme operating conditions while delivering immediate cranking speed. This kit includes also the required Genuine BMW Aluminum Mounting Screw Set.

Show More Show Less

Oil Cooler thermostat replacement kit

T#:41391173

Part#: 11428637820TKT

In Stock

$ 303.99 USD

Add to Wish List

Qty

$ 303.99 USD

Add to Wish List

BMW’s legendary turbocharged inline-6 engines demand consistent cooling to perform at their best. With the Oil Cooler Thermostat Replacement Kit - N54, N55, BMW enthusiasts can enjoy more reliable oil temperature regulation and enhanced performance both on the street and the track.

Show More Show Less

Elring Oil Pan Gasket And CRP Hardware Set

T#:56218592

Part#: 1137548031ELRKT2

In Stock

$ 82.99 USD

Add to Wish List

Qty

$ 82.99 USD

Add to Wish List

This Oil Pan Refresh Kit pairs a high tier Elring sealing gasket with the complete factory spec aluminum bolt set required for proper reassembly.

Genuine BMW Oil Pan Replacement Kit with Gasket and Hardware - N55 ...

T#:56038088

Part#: 11137600482KT5

In Stock

$ 258.62 USD

Add to Wish List

Qty

$ 258.62 USD

Add to Wish List

This overhaul kit tackles the oil pan leak head-on while giving you a complete, high-performance oil service in one shot. It features a heavy-duty oil pan gasket paired with the mandatory single-use aluminum stretch bolts that must be replaced during installation.

Show More Show Less

Oil Thermostat Caps

T#:21045481

Part#: BMS-TCP

Ships in 1 Business Day

Starting at $ 29.00 USD

Add to Wish List

Starting at $ 29.00 USD

Add to Wish List

These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.

Show More Show Less

Battery Tender Plus Advanced Battery Charging System

T#:49892371

Part#: BTT0210128

In Stock at Vendor

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

Vargas N54 To B58 Coil Conversion Kit

T#:7292057

Part#: VTT-N54-B58-CNV

Ships in 10 Business Days

Sale - Save 5% $ 677.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 641.87 USD

Add to Wish List

Sale - Save 5%

$ 677.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 641.87 USD

Add to Wish List

VTT is proud to offer its very own N54 to B58 Coil conversion kit for the N54 platform. While factory coil upgrades such as S55, and our own N54 coil upgrades do provide more spark, the BMW B58 ignition coils are extremely robust and can support well over 1000whp with no issues. This means a plug, and play affordable solution that fits like stock, and looks AMAZING doing so! Vargas's 6061-T6 Billet bracket comes in a variety of colors including matching shades for every N54 Valve Cover we offer (even the cast wrinkle). This means you can mix and match the color of the bracket with coil color, with VC color to truly tailor your engine bay to look exactly how you want it to! The kit comes with the following: 1 – Billet Aluminum Coil Bracket in the color of choice or Genuine Carbon Fiber 6 – Plug and play VTT wiring harnesses 6 – Custom VTT stalks to convert the B58 coils to the N54 head (We ensure proper spring length inside the boot for optimal spring to plug contact) 6 – Coils in the color of choice (optional) **Note: This only fits the stock N54 Valve covers or Vargas Billet and Cast Valve Covers.

Show More Show Less

A/C Belt Replacement Kit With Service Tools - F Chassis

T#:41661238

Part#: 11287631825TKT

Ships in 1 Business Day

$ 40.99 USD

Add to Wish List

Qty

$ 40.99 USD

Add to Wish List

Maintain peak performance of your BMW’s climate control system with the A/C Belt Replacement Kit With Service Tools - F Chassis, trusted by enthusiasts and technicians for its fit, quality, and ease of use.

Show More Show Less

MaxiSys Ultra

T#:2914136

Part#: MSULTRA

Ships in 6 Business Days

$ 12,306.99 USD

Add to Wish List

Qty

$ 12,306.99 USD

Add to Wish List

The MaxiSys Ultra is Autel’s most ambitious diagnostics tablet designed to maximize technician intelligence.

Timing Chain Kit - N63TU

T#:41661222

Part#: 11317594899TKT

Ships on Aug 11, 2026

Sale - Save 3% $ 849.28

This product was last offered at the strikethrough price on
05-03-2026

$ 826.32 USD

Add to Wish List

Qty

Sale - Save 3%

$ 849.28

This product was last offered at the strikethrough price on
05-03-2026

$ 826.32 USD

Add to Wish List

Timing Chain Kit for BMW N63 Engines offers a reliable solution for restoring proper timing and engine performance. This kit includes high-quality components engineered to meet or exceed OEM standards, ensuring long-lasting durability and precise fitment for all BMW N63 applications.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 7 Series F01 (2009+)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results