BMW Wheels - Genuine & Performance for BMW 7 Series F02 (2009+)

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

CI-R wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Satin Black and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling or pulling.

Specs:

• 19x8.5 ET35 - qty 4
• Satin Black
• Center Bore: PFS
• Bolt Pattern: 5x120

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

CI-R wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Platinum Silver finish with a polished rim protector and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling or pulling.

Specs:

• 19x8.5 ET35 - qty 4
• Platinum Silver finish with a polished rim protector
• Center Bore: PFS
• Bolt Pattern: 5x120

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

RS style wheels combine a lightweight forged construction with an eye-catching yet tasteful design to bring you some of the finest two-piece wheels on the market. 

Forged wheels are created by crushing a solid block of aluminum into the desired shape using an extreme amount of pressure. This creates a wheel that is incredibly strong while remaining relatively lightweight. Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a black painted finish with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling or pulling.

Specs:

• 19x9.5 RS Wheels - qty 4
• Diamond Black
• Offset: 35mm 
• Center Bore: PFS
• Bolt Pattern: 5x120

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

RS style wheels combine a lightweight forged construction with an eye-catching yet tasteful design to bring you some of the finest two-piece wheels on the market. 

Forged wheels are created by crushing a solid block of aluminum into the desired shape using an extreme amount of pressure. This creates a wheel that is incredibly strong while remaining relatively lightweight. Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a silver painted finish with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling or pulling.

Specs:

• 19x9.5 style RS Wheels - qty 4
• Diamond Silver
• Offset: 35mm 
• Center Bore: PFS
• Bolt Pattern: 5x120

10mm = .39"
5/120 bolt pattern; 72.5 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

H&R's 10mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only. This spacer has a larger mounting surface specifically designed for the larger mounting pad of F30 wheels.

This spacer slips on the existing hub lip and includes a new lip for the wheel to rest on. 10mm spacers are considered a custom fitment and special consideration must be given to ensure the spacer is fully seated on the lip (and not bottoming out on the stock hub lip). Modification of the stock hub lip may be required.

Longer wheel bolts are required. Choose from black or silver bolts from the options below.
 

Wheel Spacer FAQ

How To Measure for Spacers

Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan - Front Only
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon - Front Only
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe - Front Only
2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible - Front Only
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe - Front Only
2012+ F10 BMW M5 (front and rear)
2012+ F12 BMW M6 (front and rear)
2013+ F06 BMW M6 Gran Coupe (front and rear)

2014+ F80 M3 - Front Only

2014+F82/3 M4 - Front Only

12mm = .47"
5/120 bolt pattern; 72.5 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

H&R's 12mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only. This spacer has a larger mounting surface specifically designed for the larger mounting pad of the latest BMW wheels.

Longer wheel bolts are required.
 

Wheel Spacer FAQ

How To Measure for Spacers

Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan - Front Only
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon - Front Only
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe - Front Only
2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible - Front Only
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe - Front Only
2012+ F10 BMW M5 (front and rear)
2012+ F12 BMW M6 (front and rear)
2013+ F06 BMW M6 Gran Coupe (front and rear)

2015+ F80 BMW M3 Sedan - Front Only
2015+ F82 BMW M4 Coupe - Front Only
2015+ F83 BMW M4 Convertible - Front Only

BMW E2X E3X M3 15mm TRAK+ Hub Adapter is an essential upgrade for BMW enthusiasts looking to enhance their vehicle's handling and performance. This high-quality hub adapter, designed specifically for BMW E2X and E3X M3 models, provides a perfect fit and precise wheel alignment for improved driving dynamics.

Crafted with precision engineering and durable materials, the BMW E2X E3X M3 15mm TRAK+ Hub Adapter ensures optimal wheel fitment and spacing, allowing for wider tires and enhanced grip. It effectively widens the track width, improving stability and cornering ability for a more confident driving experience.

• Enhances vehicle handling and performance
• Designed specifically for BMW E2X and E3X M3 models
• Provides precise wheel alignment and fitment
• Allows for wider tires and enhanced grip
• Improves stability and cornering ability
• Crafted with precision engineering and durable materials

Investing in the BMW E2X E3X M3 15mm TRAK+ Hub Adapter is a smart choice for BMW owners looking to take their driving experience to the next level, with improved handling and performance.

13mm = .51"
5/120 bolt pattern; 72.5 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

H&R's 13mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only. This spacer has a larger mounting surface specifically designed for the larger mounting pad of F30 wheels.

Longer wheel bolts are required.
 

Wheel Spacer FAQ

How To Measure for Spacers

Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan - Front Only
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon - Front Only
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe - Front Only
2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible - Front Only
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe - Front Only
2011+ F10 BMW M5
2012+ F12 BMW M6
2013+ F06 BMW M6 Gran Coupe

3mm = .12"
5/120 bolt pattern; 72.5 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are recommended.
Hubcentric = Yes*, the original hub lip still protrudes through the spacer 

H&R's 3mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only. This spacer has a larger mounting surface specifically designed for the larger mounting pad of F30 wheels. 

This spacer slips on the existing hub lip and leaves some lip left over for the wheel to rest on. This keeps the wheel hubcentric*.
* - To avoid vibration, 3mm spacers work best with wheels that have a flush mounting surface. Wheels that have a bevel around the mounting surface will not be fully seated on the hub and a vibration may result. 

Longer wheel bolts are strongly recommended. Choose from black or silver bolts from the options below. Wheel locks to work with this spacer size are also available. 
 

Wheel Spacer FAQ

How To Measure for Spacers

Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe
2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe
2011+ F10 BMW M5
2012+ F12 BMW M6
2013+ F06 BMW M6 Gran Coupe

WHEEL STORAGE RACK:

Now you can stack your extra wheels without the danger of scratches and scuffs. This wheel storage rack keeps your wheels spaced apart, and being on locking casters, allows you to easily move the whole set anywhere in your garage or shop at one time. Sturdy steel construction and a wide base means this wheel rack won't tip over. Holds up to 275 lbs - enough for most any wheel & tire set.

Fits up to 8½" wide wheels, depending on offset

TIRE STACK COVER:

This tire stack by Schwaben is the solution to keeping your tires and wheels clean while in storage.

• Works with 4 tire stacks and works great with our Schwaben Wheel Tree (ES2710754).
• Durable 150D coated material is rated for outdoor use.
• Cover is a large 32" wide X 46" tall.
• Fitted with a long 29" zipper up the side for easy installation and removal.
• Nylon draw string at the bottom allows for a good snug fit.
• Includes a handy storage pouch if not in use.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.