BMW 6 Series F06 (2013+)

Replacement N55 Performance Filter, No Hardware

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3586313

Part#: REPLACEMENT-N55F

In Stock

$ 70.00 USD

Add to Wish List

Qty

$ 70.00 USD

Add to Wish List

Replacement N55 Performance Filter from Burger Motorsport

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants.

Key Features:

Designed for N55 engines
Optimizes airflow for increased power
Improves throttle response and fuel efficiency
Protects engine from contaminants

Show More Show Less

BMS Pedal Tuner - N52, N54, N55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:586269

Part#: BMSPBT

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA

Show More Show Less

90mm Black M14 BMW 5 Lug Hex Head Stud Kit - APEX

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:26171623

Part#: HW-APX-M14125-90

Ships in 2 Business Days

$ 160.00 USD

Add to Wish List

Qty

$ 160.00 USD

Add to Wish List

Upgrade your BMW race car with a stud conversion kit from [Brand Name] for enhanced strength, safety, and improved pit stop times. Even for non-race cars, stud conversions streamline wheel installation and removal, eliminating the need to align holes before threading lug bolts.

Enhanced strength and safety
Improved pit stop times
Simplified wheel installation and removal
Versatility with extended length wheel studs
Reduced wear on hub threads
Long-term durability and safety
Simplified maintenance and improved efficiency

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis & ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:598298

Part#: JB4-SPWCK-F

Ships in 1 Business Day

$ 159.00 USD

Add to Wish List

Qty

$ 159.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.

Show More Show Less

330mm MOMO MOD.78 Steering Wheel

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:301059

Part#: TMS301059

In Stock at Vendor

$ 279.00 USD

Add to Wish List

Qty

$ 279.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For use with older E chassis BMW JB4 systems with the square plastic case.

T#:403194

Part#: JB4-BT

In Stock

$ 149.00

This product was last offered at the strikethrough price on
05-13-2026

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real-time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it into the JB4 where your BMS DATA cable connects, attach the power and ground wire to the JB4 harness using the included connectors, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS, or Android® and sold separately via the Apple® or Android® app store on your phone. This adapter is not compatible with the JB4 windows interface.

Show More Show Less

APEX ARC-8 18x10" ET25 Hyper Black Concave Wheel 19.95lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:180705

Part#: ARC81810ET25HBK

In Stock

Sale - Save 15% $ 419.00

This product was last offered at the strikethrough price on
06-30-2026

$ 356.15 USD

Add to Wish List

Qty

Sale - Save 15%

$ 419.00

This product was last offered at the strikethrough price on
06-30-2026

$ 356.15 USD

Add to Wish List

18x10" ET25 Hyper Black Concave APEX ARC-8 Wheel 19.95lbs

Wheel Specs
Fitment:	Rear
Size:	18x10.0"
Offset (mm):	25
Weight (lbs):	19.95
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 18x9.5" ET35 Anthracite Concave Wheel 18.85lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:180765

Part#: ARC81895ET35AN

Ships in 5 Business Days

Sale - Save 15% $ 399.00

This product was last offered at the strikethrough price on
06-30-2026

$ 339.15 USD

Add to Wish List

Qty

Sale - Save 15%

$ 399.00

This product was last offered at the strikethrough price on
06-30-2026

$ 339.15 USD

Add to Wish List

18x9.5" ET35 Anthracite Concave APEX ARC-8 Wheel 18.85lbs

Wheel Specs
Fitment:	Rear
Size:	18x9.5"
Offset (mm):	35
Weight (lbs):	18.85
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 18x10" ET25 Satin Black Concave Wheel 19.95lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:180704

Part#: ARC81810ET25SMBK

Ships in 2 Business Days

Sale - Save 15% $ 409.00

This product was last offered at the strikethrough price on
06-30-2026

$ 347.65 USD

Add to Wish List

Qty

Sale - Save 15%

$ 409.00

This product was last offered at the strikethrough price on
06-30-2026

$ 347.65 USD

Add to Wish List

18x10" ET25 Satin Black Concave APEX ARC-8 Wheel 19.95lbs

Wheel Specs
Fitment:	Rear
Size:	18x10.0"
Offset (mm):	25
Weight (lbs):	19.95
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Universal BMW Jack Pad Red - Set Of 4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:9803960

Part#: BMWJACKPADRED4

Ships in 2 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
Prevents damage to rocker panels or vehicle undercarriage
Made from solid billet aluminum for durability
Engraved Burger Motorsports logo for authenticity
Honeycomb grip pattern for stability during use

Show More Show Less

BMW N54 N55 Oil Cooler Valve - Red Burger Motorsport Sport (4/2007+) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:588633

Part#: OILVALVE-RED

Ships in 2 Business Days

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

This simple engine oil cooler valve from Burger Motorsports increases flow to your fender mounted engine oil/air heat exchanger resulting in lower engine oil temperatures and more consistent performance during heavy throttle. Less restrictive than the spring-loaded units. Installs in minutes and is fully reversible. CNC machined for a precise fit and anodized for protection. Made in the USA. Requires BMW's external sport engine oil cooler which is standard on most 2008+ models, optional on 2007 E9x models. FEATURES AND BENEFITS Easily lower engine oil temperature Stock oil cooler will work more efficient More consistent performance CNC Machined for a perfect fit Made in USA

Show More Show Less

APEX ARC-8 18x9.5" ET22 Satin Black Concave Wheel 19.2lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:180708

Part#: ARC81895ET22SMBK

In Stock

Sale - Save 15% $ 399.00

This product was last offered at the strikethrough price on
06-30-2026

$ 339.15 USD

Add to Wish List

Qty

Sale - Save 15%

$ 399.00

This product was last offered at the strikethrough price on
06-30-2026

$ 339.15 USD

Add to Wish List

18x9.5" ET22 Satin Black Concave APEX ARC-8 Wheel 19.2lbs

Wheel Specs
Fitment:	Rear
Size:	18x9.5"
Offset (mm):	22
Weight (lbs):	19.2
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 18x9.5" ET22 Anthracite Concave Wheel 19.2lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:180710

Part#: ARC81895ET22AN

In Stock

Sale - Save 15% $ 399.00

This product was last offered at the strikethrough price on
06-30-2026

$ 339.15 USD

Add to Wish List

Qty

Sale - Save 15%

$ 399.00

This product was last offered at the strikethrough price on
06-30-2026

$ 339.15 USD

Add to Wish List

18x9.5" ET22 Anthracite Concave APEX ARC-8 Wheel 19.2lbs

Wheel Specs
Fitment:	Rear
Size:	18x9.5"
Offset (mm):	22
Weight (lbs):	19.2
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 18x10" ET25 Race Silver Wheel 19.95lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:180707

Part#: ARC81810ET25RS

Ships in 8 Business Days

Sale - Save 15% $ 409.00

This product was last offered at the strikethrough price on
06-30-2026

$ 347.65 USD

Add to Wish List

Qty

Sale - Save 15%

$ 409.00

This product was last offered at the strikethrough price on
06-30-2026

$ 347.65 USD

Add to Wish List

Silver 18x10" ET25 Silver Concave APEX ARC-8 Wheel.

Wheel Specs
Fitment:	Rear
Size:	18x10.0"
Offset (mm):	25
Weight (lbs):	19.95
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to many BMW models and fit other models when used with a specific spacer. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

GSP Front Wheel Hub & Bearing Assembly - F01, F02, F06, F07, F10, F12...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1196237

Part#: 270010

Ships in 2 Business Days

$ 115.99 USD

Add to Wish List

Qty

$ 115.99 USD

Add to Wish List

Replace your worn wheel hub assembly with this assembly

APEX ARC-8 18x9.5" ET35 Hyper Black Concave Wheel 18.85lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:180764

Part#: ARC81895ET35HBK

Ships on Jul 22, 2026

Sale - Save 15% $ 409.00

This product was last offered at the strikethrough price on
06-30-2026

$ 347.65 USD

Add to Wish List

Qty

Sale - Save 15%

$ 409.00

This product was last offered at the strikethrough price on
06-30-2026

$ 347.65 USD

Add to Wish List

18x9.5" ET35 Hyper Black Concave APEX ARC-8 Wheel 18.85lbs

Wheel Specs
Fitment:	Rear
Size:	18x9.5"
Offset (mm):	35
Weight (lbs):	18.85
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 19x10" ET25 Silver Wheel 21.95lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201396

Part#: ARC81910ET25HS

Ships in 5 Business Days

Sale - Save 15% $ 459.00

This product was last offered at the strikethrough price on
06-30-2026

$ 390.15 USD

Add to Wish List

Qty

Sale - Save 15%

$ 459.00

This product was last offered at the strikethrough price on
06-30-2026

$ 390.15 USD

Add to Wish List

19x10" ET25 APEX ARC-8 Wheel 21.95lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x10"
Offset (mm):	25
Weight (lbs):	21.95
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 19x10" ET25 Satin Black Wheel 21.95lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201395

Part#: ARC81910ET25SMBK

Ships in 5 Business Days

Sale - Save 15% $ 459.00

This product was last offered at the strikethrough price on
06-30-2026

$ 390.15 USD

Add to Wish List

Qty

Sale - Save 15%

$ 459.00

This product was last offered at the strikethrough price on
06-30-2026

$ 390.15 USD

Add to Wish List

19x10" ET25 APEX ARC-8 Wheel 21.95lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x10"
Offset (mm):	25
Weight (lbs):	21.95
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 18x9.5" ET22 Hyper Black Concave Wheel 19.2lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:180709

Part#: ARC81895ET22HBK

Ships in 5 Business Days

Sale - Save 15% $ 409.00

This product was last offered at the strikethrough price on
06-30-2026

$ 347.65 USD

Add to Wish List

Qty

Sale - Save 15%

$ 409.00

This product was last offered at the strikethrough price on
06-30-2026

$ 347.65 USD

Add to Wish List

18x9.5" ET22 Hyper Black Concave APEX ARC-8 Wheel 19.2lbs

Wheel Specs
Fitment:	Rear
Size:	18x9.5"
Offset (mm):	22
Weight (lbs):	19.2
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

MOMO MOD.78 Suede Steering Wheel - 330mm & 350mm

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:338958

Part#: TMS1350

In Stock at Vendor

Starting at $ 279.00 USD

Add to Wish List

Starting at $ 279.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable and slip resistant black suede covering, and thumb recesses for comfort and control.

Show More Show Less

APEX ARC-8 19x10.5" ET22 Anthracite Wheel 22.95lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201400

Part#: ARC819105ET22AN

Ships in 5 Business Days

Sale - Save 15% $ 469.00

This product was last offered at the strikethrough price on
06-30-2026

$ 398.65 USD

Add to Wish List

Qty

Sale - Save 15%

$ 469.00

This product was last offered at the strikethrough price on
06-30-2026

$ 398.65 USD

Add to Wish List

19x10.5" ET27 APEX ARC-8 Wheel 22.95lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x10.5"
Offset (mm):	27
Weight (lbs):	22.95
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

MOMO Mod.08 Steering Wheel - Black - 350mm Suede

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:343229

Part#: R1908/35S

Ships on Jul 28, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable suede covering, and an ergonomic feel for comfort and control. An ideal size for most cars and drivers, and made by renowned MOMO Italy. This is a most attractive and low cost solution. Hub adapter required.

Show More Show Less

Autel Universal Rubber TPMS Sensor - Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3529121

Part#: AUL1SENSORKT

In Stock

$ 243.99 USD

Add to Wish List

Qty

$ 243.99 USD

Add to Wish List

Burger Motorsports F-Series N55 JB4 - Electronic Wastegate - F22/23 F...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:567659

Part#: JB4-F30-EWG

In Stock

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Ready to take your F chassis N55 BMW to the next level? How about up to 60hp to the wheels (80hp crank) on a completely stock car or up to 100hp to the wheels (120hp crank) on a fully modified car? The JB4 features a simple plug and play installation harness for easy installation and includes many features not found on any other tune. Including the ability to enable/disable the tuning from the drivers seat, gear dependent boost control to help with traction, autotuning for E85 mixtures, built-in diagnostic code reading/deleting, expanded engine safety systems, free firmware updates, in-dash boost gauge, the ability to control the exhaust flapper using your BC button, and much more. The JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. For more advanced enthusiasts the BMS DATA or JB4 Mobile cable allows you to connect a laptop or smartphone for additional gauges, data logging, and free firmware updates as we add new features and maps. The JB4 is a full plug and play device that installs and removes in minutes at home without special tools and unlike flash maps that permanently write over your DME with the JB4, your DME is never aware it's running more than the factory power levels. And when you're ready to change things up the JB4 is not VIN locked and can be moved to your next vehicle or resold. Made in the USA. 5 Year Warranty. Note for electronic wastegate models: the EWG add on connector remains optional and can be purchased separately from BMS's upgrades for higher HP applications where direct EWG control is beneficial such as those using an integrated WMI kit or larger turbo.

Show More Show Less

Burger Motorsports JB4 Tuner - Type B Harness w/ Pneumatic Wastegate ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not for sale or use in the state of California.

T#:402619

Part#: JB4-F10-B

Ships on Jul 21, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

You've heard about it before, and now it's available here at Turner Motorsport! The Burger Motorsport JB4 Tuner is one of the most versatile, adaptable modifications you can make to your BMW, and among the simplest to install. A true plug & play solution, the JB4 offers support for everything from stock cars to fully built monsters. Stock cars can expect gains of up to 60 wheel horsepower, while modified cars can expect to see gains of over 100 WHP! With an additional cable, you can connect your smart device or laptop to enjoy datalogging and tuning capabilities. It's all-inclusive and fully featured - it's the JB4 from Turner Motorsport. Order yours today! Burger Motorsports Tuning Products are for off-road racing use only - NOT FOR SALE OR USE IN CALIFORNIA! Fits the Following BMWs: F06 F07 F10 F12 F13 N55 with Pneumatic Wastegate and harness type B

Show More Show Less

APEX EC-7 19x10" ET25 Anthracite Wheel 23.5lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201373

Part#: EC71910ET25AN

Ships in 5 Business Days

$ 469.00 USD

Add to Wish List

Qty

$ 469.00 USD

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x10"
Offset (mm):	25
Weight (lbs):	23.5
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 19" Staggered Wheel Set - Satin Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:599190

Part#: ARC819105ET22KT2

Ships on Oct 22, 2026

Sale - Save 15% $ 1,814.00

This product was last offered at the strikethrough price on
06-30-2026

$ 1,541.90 USD

Add to Wish List

Qty

Sale - Save 15%

$ 1,814.00

This product was last offered at the strikethrough price on
06-30-2026

$ 1,541.90 USD

Add to Wish List

Specifications: Color - Satin Black Size Front - 19x9.5" ET22 Size Rear - 19x10.5" ET22

APEX ARC-8 19x9.5" ET22 Silver Wheel 20.95lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201387

Part#: ARC81995ET22HS

Ships in 5 Business Days

Sale - Save 15% $ 449.00

This product was last offered at the strikethrough price on
06-30-2026

$ 381.65 USD

Add to Wish List

Qty

Sale - Save 15%

$ 449.00

This product was last offered at the strikethrough price on
06-30-2026

$ 381.65 USD

Add to Wish List

Silver 19x9.5" ET22 APEX ARC-8 Wheel.

Wheel Specs
Fitment:	Front or Rear
Size:	19x9.5"
Offset (mm):	22
Weight (lbs):	20.95
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit many BMW models and may fit others when used with a specific spacer. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Active Autowerke Signature Trunk Emblem

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:590914

Part#: AASIGNATUREPLAQU

Ships in 3 Business Days

4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Qty

4% off MSRP

$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

Burger Motorsports JB4 Tuner - Type A Harness w/ Pneumatic Wastegate ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not for sale or use in the state of California.

T#:402618

Part#: JB4-F10-A

Ships in 2 Business Days

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

You've heard about it before, and now it's available here at Turner Motorsport! The Burger Motorsport JB4 Tuner is one of the most versatile, adaptable modifications you can make to your BMW, and among the simplest to install. A true plug & play solution, the JB4 offers support for everything from stock cars to fully built monsters. Stock cars can expect gains of up to 60 wheel horsepower, while modified cars can expect to see gains of over 100 WHP! With an additional cable, you can connect your smart device or laptop to enjoy datalogging and tuning capabilities. It's all-inclusive and fully featured - it's the JB4 from Turner Motorsport. Order yours today! Burger Motorsports Tuning Products are for off-road racing use only - NOT FOR SALE OR USE IN CALIFORNIA! Fits the Following BMWs: F06 F07 F10 F12 F13 N55 with Pneumatic Wastegate and harness type A

Show More Show Less

Burger Motorsports JB4 Tuner - N63TU - BMW F-Chassis

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For F-Chassis Vehicles w/ N63TU Engine Only; Not for sale or use in California

T#:600238

Part#: JB4-N63TU-F

Ships in 7 Business Days

$ 679.00 USD

Add to Wish List

Qty

$ 679.00 USD

Add to Wish List

The JB4 is the most advanced and highly featured tuning system available for your N63 powered vehicle. Power gains are up to 100whp and 140wtq on a stock car. The JB4 features a simple plug and play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in dash map switching between factory and various performance maps, optional in-dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built-in data logging, built-in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or REV3 mobile phone adapter. JB4 Features and Benefits Power gains of up to 100hp and 140tq to the wheels on a stock vehicle Improves 0-60 times and 1/4 mile times The JB4 offers a lot more performance, functionality, and safety than your average performance chip Quick Plug & Play Installation Includes the rugged JB4 billet aluminum enclosure for protection CANbus OBDII integration offering unrivaled tuning features and performance Improved performance over non-integrated chip tunes Runs as smoothly as stock, this is how your vehicle should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving Compatible with JB4 Mobile for smartphone logging, tuning changes, and adjustment 91 octane fuel or better required for performance gains Ethanol (E85) compatible tuning maps Able to read/delete fault codes Not VIN locked and can be removed without a trace and resold down the road Made in the USA Free USA Shipping 5 year warranty Note: For off-road racing use only. Not for sale or use in California.

Show More Show Less

Burger Motorsports JB4 Tuner - Type B Harness w/ Electronic Wastegate...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not for sale or use in the state of California.

T#:558426

Part#: JB4-F10-EWG

Special Order: No Guaranteed ETA

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

You've heard about it before, and now it's available here at Turner Motorsport! The Burger Motorsport JB4 Tuner is one of the most versatile, adaptable modifications you can make to your BMW, and among the simplest to install. A true plug & play solution, the JB4 offers support for everything from stock cars to fully built monsters. Stock cars can expect gains of up to 60 wheel horsepower, while modified cars can expect to see gains of over 100 WHP! With an additional cable, you can connect your smart device or laptop to enjoy datalogging and tuning capabilities. It's all-inclusive and fully featured - it's the JB4 from Turner Motorsport. Order yours today! Burger Motorsports Tuning Products are for off-road racing use only - NOT FOR SALE OR USE IN CALIFORNIA!

Show More Show Less

MOMO Tuner Steering Wheel - Black Spoke 320mm

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:388375

Part#: TUN32BK0B

Special Order: No Guaranteed ETA

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control. An ideal size for most cars and drivers, and made by renowned MOMO Italy. This is a most attractive and low cost solution. Hub adapter required.

Show More Show Less

MOMO Team Steering Wheel

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:390888

Part#: TEA-MOMO

Ships on Aug 6, 2026

Starting at $ 249.00 USD

Add to Wish List

Starting at $ 249.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

MOMO Prototipo Steering Wheel - Silver - 350mm

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:388372

Part#: PRO35BK0S

Special Order: No Guaranteed ETA

$ 269.00 USD

Add to Wish List

Qty

$ 269.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

MOMO Automatico Shift Knob - Leather/Chrome

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:388399

Part#: AUTOBK1

Special Order: No Guaranteed ETA

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

MOMO Automatico leather shift knob for nearly all BMWs. Installs in minutes for a unique touch to your interior. High quality black Endurance leather with bright chrome base. The Automatico knob favors over-palm shifting (the palm over the top of the knob) or pistol grip shifting. This knob is 9.8oz, heavier than most MOMO or factory BMW knobs. Comes with installation kit, ready to install.

Show More Show Less

MOMO Mod.07 Steering Wheel

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:339964

Part#: TMS21537

Ships on Aug 6, 2026

Starting at $ 249.00 USD

Add to Wish List

Starting at $ 249.00 USD

Add to Wish List

MOMO Mod 07 steering wheel is inspired by classic rally cars. Featuring a deep 70mm dish layout to put the wheel rim closer to the driver. Having the wheel closer to the driver means better leverage for quick steering corrections The Mod 07 has a standard 30mm round rim in either leather or suede.

Show More Show Less

MOMO Monte Carlo Steering Wheel - Red - 350mm

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:388364

Part#: MCL35BK3B

Special Order: No Guaranteed ETA

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

MOMO Mod.88 Steering Wheel - Black - 350mm

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1863

Part#: TMS1863

Special Order: No Guaranteed ETA

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

MOMO Mod.88 Steering Wheel for track/competition use. An evolution to the hugely popular Mod 78 wheel. This wheel features a flat bottom for more leg clearance and better grip. It has a slightly oblong 350mm diameter rim with black suede covering.

Show More Show Less

MOMO Tuner Steering Wheel

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:340479

Part#: TUN35BK0B

Ships on Aug 6, 2026

Starting at $ 239.00 USD

Add to Wish List

Starting at $ 239.00 USD

Add to Wish List

The MOMO Tuner steering wheels combine the best features of all of the MOMO wheels. Stylish and functional, they give an immediate upgrade in steering feel and response while upgrading the aesthetics of your interior at the same time.

Show More Show Less

MOMO Prototipo Steering Wheel

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:390875

Part#: PRO35BK

Ships on Aug 13, 2026

Starting at $ 269.00 USD

Add to Wish List

Starting at $ 269.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

MOMO Prototipo Steering Wheel - Black - 350mm

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1040

Part#: PRO35BK2BLACK

Special Order: No Guaranteed ETA

$ 269.00 USD

Add to Wish List

Qty

$ 269.00 USD

Add to Wish List

MOMO Prototipo Black steering wheel. 350mm diameter (13.8 inches). Soft black leather rim with black anodized aluminum spokes. A beautiful addition to any interior. Perfect for vintage BMWs and Porsches because of its period-correct look.

Wheel hub adapter required.

Show More Show Less

MOMO Monte Carlo Steering Wheel - Black - 350mm

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1864

Part#: MCL35BK1B

In Stock

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

MOMO Monte Carlo Steering Wheel. 350mm diameter (13.8 inches). Black leather rim with black anodized center. A beautiful and classic steering wheel upgrade.

Requires a wheel hub adapter, choose one below.

Show More Show Less

MOMO Monte Carlo Steering Wheel

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:390872

Part#: MCL35BKXB

In Stock

Starting at $ 239.00 USD

Add to Wish List

Starting at $ 239.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. The MOMO Monte Carlo is a seminal classic MOMO wheel design. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

Front Axle Shaft - Right

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:640598

Part#: NCV27046

Ships in 3 Business Days

$ 273.99 USD

Add to Wish List

Qty

$ 273.99 USD

Add to Wish List

No core required

APEX Solid Gloss Black BMW Center Caps - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:639899

Part#: HW-APX-CAP-BLK

Ships in 9 Business Days

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

Maxi TPMS Kit With Sensors

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5663676

Part#: AULTS508K1

Ships in 6 Business Days

$ 739.99 USD

Add to Wish List

Qty

$ 739.99 USD

Add to Wish List

Pinpoint and replace bad TPMS Sensors

APEX EC-7 19x10.5" ET22 Satin Black Wheel 23.9lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201374

Part#: EC719105ET22SMBK

Ships in 5 Business Days

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x10.5"
Offset (mm):	22
Weight (lbs):	23.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX Wheels Metal Valve Stem - Anthracite - BMW & MINI

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:593645

Part#: HW-OEM-VALVE-GM

Ships in 2 Business Days

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap

Show More Show Less

MaxiBAS BT506

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2914145

Part#: BT506

Ships in 6 Business Days

$ 402.99 USD

Add to Wish List

Qty

$ 402.99 USD

Add to Wish List

The BT506 is a battery and electrical system analysis tool that use as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a b

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Replacement N55 Performance Filter from Burger Motorsport

Key Features:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results