BMW 6 Series F06 (2013+)

Tekwax Rust Proofing Spray - Winzer

This item is classified as Hazardous Materials and requires special shipping and handling. We cannot ship this item out of the US or with priority shi

T#:556907

Part#: 891.9016KT

In Stock

$ 22.00 USD

Add to Wish List

Qty

$ 22.00 USD

Add to Wish List

Being a New-England based company we see all variations of weather conditions. And we've seen more than a lot of seized coil overs and other metal items that have fallen prey to corrosion and rust. This Winzer Tek Wax is the best defense against corrosion that we have yet to come across. TekWax is a heavy-duty, flexible wax that you spray onto metal surfaces and it forms a durable protective film. It was originally used as a sealant for wheel wells, bodyshells, rocker panels, and chassis panels which makes it ideal for un-coated and exposed metal parts on your car. It has a high-quality matte amber finish that is also slightly tacky to the touch. Another plus is that it can give some components an original OEM appearance. We spray Tech Wax on our coilover threads to keep salt and sand from gumming up the threads and seizing the adjustment collars. We also use it on other exposed metal surfaces that don't have any corrosion protection from their manufacturers (steering hose fittings, even fastners and hardware). The finished surface has an amber (gold-ish) hue that blends in with many other hard parts on the car and it has an overall 'finished' look. TekWax is sold as a 24oz aerosol can. It ships by UPS Ground only. Follow instructions on the can for the best and safest results.

Show More Show Less

Billet Oil Filter Cap

T#:21045489

Part#: BMS-OFC

In Stock

Starting at $ 89.00 USD

Add to Wish List

Starting at $ 89.00 USD

Add to Wish List

The Burger Motorsports V2 billet aluminum oil filter cover is a metal upgrade that directly replaces your weak OE plastic cap for greater protection, better cooling, ease of removal/install, and looks great under the hood. The built-in 21mm hex and a 3/8" drive socket wrench fitting that does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter cage. Anodized for protection. This quality part is a must for any serious BMW owner. Replaces OEM part number 11427525334 - BMW Oil filter cover. Features and Benefits Solid aluminum design is much stronger than brittle plastic 21mm hex head + 3/8" drive socket wrench fitting Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter cage and o-ring Anodized for protection Looks great under the hood Made in the USA

Show More Show Less

Port Injector Plugs

T#:27171925

Part#: UNI-BMS-PIPLUGS

In Stock

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.

Show More Show Less

BMW F30 E9X TMAP Sensors & PNP Adapters

T#:583821

Part#: 3.5 BAR TMAP

In Stock

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

JB4 3.5 bar plug and play TMAP adapters

BMW / MINI Jack Pad Adapters - Blue - Set Of 4

T#:31522930

Part#: BMWJACKPADBLUE4

Ships in 1-2 days

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

Spark Plug Gapper Tool BMS Billet

T#:26404907

Part#: 12MMSPG

In Stock

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

Burger Motorsports 3.5 Bar TMAP Sensor & 32" Extension Harness - N54 ...

T#:28504212

Part#: BMS35TMAP-32

Back Ordered

$ 179.00 USD

Add to Wish List

Qty

$ 179.00 USD

Add to Wish List

Use these plug-and-play adapters to quickly adapt a 3.5 BAR TMAP sensor to your N54/N55 BMW, raising the boost maximum boost range from 20psi factory up to 36psi for the 3.5 bar. For most applications the 3.5 BAR adapter is suggested which requires OEM BMW sensor part number: 13627843531.

Show More Show Less

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

T#:20815185

Part#: BMSWMITC

Ships in 7 Business Days

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

Burger Motorsport Replacement Billet Performance Intake Filter - 3.5"...

T#:28968878

Part#: 1123BMS

Ships in 1-2 days

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

This is a replacement filter for the popular 3.5" Burger Motorsports Performance Intakes. It comes pre-oiled with blue filter oil and a new clamp.

Includes:

Reusable BMS 3.5" inverted cone performance air filter (1123) Metal clamp

Show More Show Less

Replacement N55 Performance Filter - Red

T#:38890883

Part#: BMSREPAFNFFR

In Stock

$ 70.00 USD

Add to Wish List

Qty

$ 70.00 USD

Add to Wish List

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants. Key Features: Designed for N55 engines Optimizes airflow for increased power Improves throttle response and fuel efficiency Protects engine from contaminants

Show More Show Less

1 Gallon Methanol Tank - Clear/White

T#:558165

Part#: 1G-MT-CL

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

OMP Racing Seat Lumbar Cushion | Small - Black

T#:393787

Part#: HB/692

Ships on Oct 8, 2026

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

If additional lower back support is needed for those extra long days in the racing seat, OMP offers the Racing Seat Lumbar Cushion. Measuring in at 10" by 5" by 2", it is fastened to the velour fabric of the seat with Velcro strips, it can be adjusted to exactly where you need it. The pad itself is covered with the same velour flame-retardant material as the seat and is embroidered with an OMP logo.

Show More Show Less

Improved Racing BMW Oil Cooler Thermostat (180F)

T#:27171935

Part#: IRTHERM

Back Ordered

Starting at $ 318.99 USD

Add to Wish List

Starting at $ 318.99 USD

Add to Wish List

Precise Oil Temperature Control for Your BMW Upgrade your BMW N20, N26, N51, N52, N53, N54, N55, and S55 engine's oil temperature control with Improved Racing's high-performance oil cooler adapter. Designed to address flaws in the factory's restrictive oil cooler adapter and faulty internal flow control valve, this upgrade ensures precise oil temperature control. Improved Racing's thermostat provides quick engine warmup, prevents overcooling, and delivers full oil cooling capacity on demand. Trusted by professional race teams around the globe, Improved Racing's thermostats have proven highly reliable, are backed by a lifetime warranty, and are made in the USA. Option to Use the Factory Oil Cooler and Lines The optional factory oil line adapter allows you to use the factory oil cooler lines for a simple, plug-and-play installation. For maximum performance, the factory oil cooler and lines may be replaced with an aftermarket cooler and AN lines using the AN adapter fittings (-10AN line size is recommended). Please note that some applications, such as most BMW SUV's, use a water-to-oil heat exchangers. These applications require plugging the coolant supply and return ports, as well as adding an external air-to-oil cooler and lines (factory or aftermarket). Please note the Oil cooler adapter cannot be used without an oil cooler.

Show More Show Less

BMC Filter Cleaning Kit

T#:590913

Part#: WA250-500

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

BMW Jack Pad Silver - Set Of 4

T#:26438196

Part#: BMWJACKPADSILR4

Ships in 1 Business Day

$ 77.99 USD

Add to Wish List

Qty

$ 77.99 USD

Add to Wish List

BMS DDP5800 Water/Methanol Injection Pump

T#:20815186

Part#: BMSDDP5800

Ships in 1 Business Day

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

BMS Elite Titanium Cone Seat Lug Nuts - M14x1.25 - 20

T#:21209837

Part#: BMS-ETLN20

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

BMS Elite titanium lug nuts are up to 50% lighter than equivalent OEM steel lugs, have a high tensile strength, and do not succumb to heat degradation, rust, or corrosion. Material: Hot forged grade 5 titanium Ti-6AL-4V Color: Black Wight: 22g each Thread: M14x1.25 Seat: 60º Cone/Conical Hex Head: 19mm Type: Open Set: 20 Lug Nuts

Show More Show Less

Billet Spark Plug Gapper Tool - 14mm - BMS

T#:583132

Part#: BMSBSPGT14MM

Ships in 7 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

Precisely gaps spark plugs for enhanced engine performance and efficiency
Speeds up the gapping process while ensuring accuracy and uniformity
Available in two sizes (14mm and 12mm) for a wider range of compatibility
Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
Made in the USA for premium quality and durability

Show More Show Less

2 Gallon Low Profile Universal Methanol Tank

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

Burger Motorsports Turbo Double Baffle Oil Catch Can - F23 235i Conve...

T#:5567062

Part#: OCCN55-235VERT

Ships on Oct 6, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

It's no secret that BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Large 16mm+ inlet and outlet exceeds OEM PCV sizing Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)

Show More Show Less

Blue Thermostat Caps (pair)

T#:54139632

Part#: BMS-TCP-BLU

Ships in 1 Business Day

$ 29.00 USD

Add to Wish List

Qty

$ 29.00 USD

Add to Wish List

1.25 Gallon Heavy-Duty Universal Methanol Tank

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Oct 6, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Billet Oil Thermostat Lid

T#:21045480

Part#: BMS-TLID

In Stock

Starting at $ 39.00 USD

Add to Wish List

Starting at $ 39.00 USD

Add to Wish List

These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.

Show More Show Less

GSP Rear Wheel bearing - E39, E60, F01, F02, F06, F07, F10, F12, F13 ...

For vehicles with production date up to 09/2013

T#:389689

Part#: 273225

Ships in 2 Business Days

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

This item fits the following BMWs:

1997-2003 E39 BMW 525i 528i 530i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i

Show More Show Less

BMS Pedal Tuner - N52, N54, N55 (Manual Transmission)

T#:20155613

Part#: BMSPBT-M

Ships on Oct 6, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA

Show More Show Less

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

T#:558163

Part#: BMS-WMI

Ships on Oct 6, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

OMP Racing Seat Lumbar Cushion | Medium - Black

T#:393785

Part#: HB/662

Special Order: No Guaranteed ETA

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

If additional lower back support is needed for those extra long days in the racing seat, OMP offers the Racing Seat Lumbar Cushion. Measuring in at 10" by 8" by 3", it is fastened to the velour fabric of the seat with Velcro strips, it can be adjusted to exactly where you need it. The pad itself is covered with the same velour flame-retardant material as the seat and is embroidered with an OMP logo.

Show More Show Less

BMW Jack Pad Blue - Pair

T#:31191904

Part#: BMWJACKPADBLUE2

Back Ordered

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

BMW Jack Pad Blue - Pair provides a professional-grade solution for safely lifting your BMW. Designed to fit perfectly at the factory jack points, this metal jack pad adapter ensures that you can lift your BMW, 2020 Supra, or MINI without risking damage to the jack points, rocker panels, or undercarriage.

Safe Lifting: Designed for use at factory jack points to prevent damage.
Durable Construction: Made from solid billet aluminum for long-lasting performance.
Convenient Design: Easy to use with any floor jack, features a honeycomb grip pattern for stability.
Non-Damaging: Does not touch or harm painted surfaces.
USA Made: Crafted in the USA with precision and quality.

This jack pad adapter is a must-have tool for enthusiasts who want to lift their vehicles securely and correctly every time.

Show More Show Less

Water/Methanol Injection Hose - 20'

T#:21176944

Part#: BMS-WMI-IL

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Suvneer Motorsports Wheel Hanger - M14x1.25mm - Anodized Red ...

T#:26005166

Part#: WHLHGR-14125-RD

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Introducing the Suvneer Motorsports™ Wheel Hanger – an essential tool designed to streamline the wheel installation process, embodying the precision and quality synonymous with the Suvneer Motorsports™ brand. Crafted with a keen eye for detail and performance, this wheel hanger is a must-have for automotive enthusiasts and professionals seeking a reliable and efficient solution. Constructed from high-grade materials, the Suvneer Motorsports™ Wheel Hanger combines durability with precision engineering. Its robust design ensures longevity, making it a trusted companion for both amateur and seasoned mechanics alike. The hanger's strength lies in its ability to simplify the often intricate task of wheel installation. The ergonomic design of the Suvneer Motorsports™ Wheel Hanger is crafted for user comfort and efficiency. With a sleek, user-friendly shape, it provides a secure grip, allowing for ease of handling during the wheel installation process. The precisely machined threads deliver a seamless engagement with lug holes, eliminating the frustration of cross-threading and ensuring a smooth and trouble-free wheel installation. Versatility is at the forefront of the Wheel Hanger's design. Engineered to accommodate various lug patterns, it is universally compatible, catering to a wide range of vehicle makes and models. This adaptability makes it an indispensable tool for any automotive enthusiast, ensuring that the right tool is always at hand for a hassle-free wheel installation experience. Experience the Suvneer Motorsports™ commitment to excellence with the Wheel Hanger – a tool that seamlessly combines functionality, durability, and ease of use. Elevate your garage experience with a precision-engineered solution that simplifies the wheel installation process, allowing you to achieve professional results effortlessly. Trust in the Suvneer Motorsports™ Wheel Hanger to deliver a superior wheel installation experience where performance meets convenience in the world of motorsports. Key Features: Material: Strong 6061-T6 Aluminum Alloy Precision Fitment: Designed to help hold your wheel in place. Lightweight: Precipitated Hardened Aluminum

Show More Show Less

Suvneer Motorsports Wheel Hanger - M14x1.25mm - Anodized Gunmetal ...

T#:26005169

Part#: WHLHGR-14125-GM

Ships in 5 Business Days

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Introducing the Suvneer Motorsports™ Wheel Hanger – an essential tool designed to streamline the wheel installation process, embodying the precision and quality synonymous with the Suvneer Motorsports™ brand. Crafted with a keen eye for detail and performance, this wheel hanger is a must-have for automotive enthusiasts and professionals seeking a reliable and efficient solution. Constructed from high-grade materials, the Suvneer Motorsports™ Wheel Hanger combines durability with precision engineering. Its robust design ensures longevity, making it a trusted companion for both amateur and seasoned mechanics alike. The hanger's strength lies in its ability to simplify the often intricate task of wheel installation. The ergonomic design of the Suvneer Motorsports™ Wheel Hanger is crafted for user comfort and efficiency. With a sleek, user-friendly shape, it provides a secure grip, allowing for ease of handling during the wheel installation process. The precisely machined threads deliver a seamless engagement with lug holes, eliminating the frustration of cross-threading and ensuring a smooth and trouble-free wheel installation. Versatility is at the forefront of the Wheel Hanger's design. Engineered to accommodate various lug patterns, it is universally compatible, catering to a wide range of vehicle makes and models. This adaptability makes it an indispensable tool for any automotive enthusiast, ensuring that the right tool is always at hand for a hassle-free wheel installation experience. Experience the Suvneer Motorsports™ commitment to excellence with the Wheel Hanger – a tool that seamlessly combines functionality, durability, and ease of use. Elevate your garage experience with a precision-engineered solution that simplifies the wheel installation process, allowing you to achieve professional results effortlessly. Trust in the Suvneer Motorsports™ Wheel Hanger to deliver a superior wheel installation experience where performance meets convenience in the world of motorsports. Key Features: Material: Strong 6061-T6 Aluminum Alloy Precision Fitment: Designed to help hold your wheel in place. Lightweight: Precipitated Hardened Aluminum

Show More Show Less

GSP Rear Axle Assembly - Left - F06, F10, F12, F13

T#:54388486

Part#: NCV28001K

In Stock

$ 141.99

This product was last offered at the strikethrough price on
06-24-2026

$ 129.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 141.99

This product was last offered at the strikethrough price on
06-24-2026

$ 129.99 USD

Limited Qty Sale

Add to Wish List

When it comes to keeping your ultimate driving machine planted and putting power to the pavement, compromise isn't an option. Since 2004, GSP has been an industry leader in North American drivetrain technology, consistently beating the competition to market with the newest applications and broadest coverage.

Show More Show Less

JB4 Magnetic Cell Phone Mount

T#:41255924

Part#: JB4MAGCELLMNT

In Stock

$ 15.00

This product was last offered at the strikethrough price on
05-22-2026

$ 5.00 USD

Add to Wish List

Qty

$ 5.00 USD

Add to Wish List

Oil Thermostat Caps

T#:21045481

Part#: BMS-TCP

Ships in 1 Business Day

Starting at $ 29.00 USD

Add to Wish List

Starting at $ 29.00 USD

Add to Wish List

These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.

Show More Show Less

AAE Remanufactured Transfer Case Assembly w/ Electric Motor - BMW F22...

T#:42705799

Part#: GBA-59251MKT

Ships in 3 Business Days

$ 3,519.99 USD

Add to Wish List

Qty

$ 3,519.99 USD

Add to Wish List

These transfer cases are fully disassembled, cleaned, and remanufactured to meet or exceed OE specifications using OEM components. High-wear parts such as bearings, seals, gaskets, clutches, plastic components, and mounts are replaced, ensuring consistent and reliable performance.

Show More Show Less

BMW Jack Pad Red - Pair

T#:54388469

Part#: BMWJACKPADRED2

Ships on Oct 6, 2026

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Lifting your BMW, MINI, or GR Supra should never involve crossing your fingers and hoping you don't crush a rocker panel. Plastic factory jack points are notorious for cracking under the flat, unforgiving surface of a standard floor jack. Stop damaging your car's undercarriage and lift like a pro with this Billet Jack Pad Adapter from Burger Motorsports.

Show More Show Less

Suvneer Wheel Hanger - M12 X 1.25 - Blue

Specifically for vehicles using M12 x 1.25 wheel bolts

T#:51356105

Part#: WHLHGR-12125-BL

Ships in 5 Business Days

$ 17.00 USD

Add to Wish List

Qty

$ 17.00 USD

Add to Wish List

The Suvneer Motorsports™ Wheel Hanger is the "third hand" you need in your trunk or toolbox.

Burger Motorsports Logo Sticker Sheet (TWO PACK) - Alpine White ...

T#:41255922

Part#: BMSLSS-AW

Ships on Oct 6, 2026

$ 5.00 USD

Add to Wish List

Qty

$ 5.00 USD

Add to Wish List

Suvneer Motorsports Wheel Hanger - M14x1.25mm - Anodized Clear ...

T#:26005168

Part#: WHLHGR-14125-CL

Ships in 5 Business Days

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Introducing the Suvneer Motorsports™ Wheel Hanger – an essential tool designed to streamline the wheel installation process, embodying the precision and quality synonymous with the Suvneer Motorsports™ brand. Crafted with a keen eye for detail and performance, this wheel hanger is a must-have for automotive enthusiasts and professionals seeking a reliable and efficient solution. Constructed from high-grade materials, the Suvneer Motorsports™ Wheel Hanger combines durability with precision engineering. Its robust design ensures longevity, making it a trusted companion for both amateur and seasoned mechanics alike. The hanger's strength lies in its ability to simplify the often intricate task of wheel installation. The ergonomic design of the Suvneer Motorsports™ Wheel Hanger is crafted for user comfort and efficiency. With a sleek, user-friendly shape, it provides a secure grip, allowing for ease of handling during the wheel installation process. The precisely machined threads deliver a seamless engagement with lug holes, eliminating the frustration of cross-threading and ensuring a smooth and trouble-free wheel installation. Versatility is at the forefront of the Wheel Hanger's design. Engineered to accommodate various lug patterns, it is universally compatible, catering to a wide range of vehicle makes and models. This adaptability makes it an indispensable tool for any automotive enthusiast, ensuring that the right tool is always at hand for a hassle-free wheel installation experience. Experience the Suvneer Motorsports™ commitment to excellence with the Wheel Hanger – a tool that seamlessly combines functionality, durability, and ease of use. Elevate your garage experience with a precision-engineered solution that simplifies the wheel installation process, allowing you to achieve professional results effortlessly. Trust in the Suvneer Motorsports™ Wheel Hanger to deliver a superior wheel installation experience where performance meets convenience in the world of motorsports. Key Features: Material: Strong 6061-T6 Aluminum Alloy Precision Fitment: Designed to help hold your wheel in place. Lightweight: Precipitated Hardened Aluminum

Show More Show Less

AAE Remanufactured Transfer Case Assembly - BMW F22/23 F3X F07/10 F06...

T#:42705795

Part#: GBA-59251KT

Ships in 3 Business Days

$ 2,563.99 USD

Add to Wish List

Qty

$ 2,563.99 USD

Add to Wish List

These transfer cases are fully disassembled, cleaned, and remanufactured to meet or exceed OE specifications using OEM components. High-wear parts such as bearings, seals, gaskets, clutches, plastic components, and mounts are replaced, ensuring consistent and reliable performance.

Show More Show Less

Suvneer Wheel Hanger - M12 X 1.25 - Silver

Specifically for vehicles using M12 x 1.25 wheel bolts

T#:51356106

Part#: WHLHGR-12125-CL

Ships in 5 Business Days

$ 17.00 USD

Add to Wish List

Qty

$ 17.00 USD

Add to Wish List

The Suvneer Motorsports™ Wheel Hanger in Silver is the perfect "third hand" for your garage.

Official JB4 Logo Car Emblem/Badge

T#:41255923

Part#: BMSJB4LOGO

Ships on Oct 6, 2026

$ 10.00 USD

Add to Wish List

Qty

$ 10.00 USD

Add to Wish List

BMS Water/Methanol Injection (WMI) Solenoid W/ Filter

T#:21176934

Part#: BMS-WMI-SOL

Ships on Oct 6, 2026

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

This solenoid safely stops fluid from flowing into your intake system when WMI is not in use. The solenoid features two 1/8 NPT ports with included compression 1/4 in. hose fittings for a quick leak-free connection. The included filter keeps dirt and debris out of your engine.

Show More Show Less

BMW Jack Pad Red - Price Each

T#:54388468

Part#: BMWJACKPADRED1

Ships on Oct 6, 2026

$ 19.00 USD

Add to Wish List

Qty

$ 19.00 USD

Add to Wish List

Lifting your BMW, MINI, or GR Supra should never involve crossing your fingers and hoping you don't crush a rocker panel. Plastic factory jack points are notorious for cracking under the flat, unforgiving surface of a standard floor jack. Stop damaging your car's undercarriage and lift like a pro with this Billet Jack Pad Adapter from Burger Motorsports.

Show More Show Less

BMS Official 3D JB4 License Plate Frame

T#:41255921

Part#: BMSJB4LPF

In Stock

$ 10.00 USD

Add to Wish List

Qty

$ 10.00 USD

Add to Wish List

BMW Jack Pad Silver - Price Each

T#:30330970

Part#: BMWJACKPADSLVR1

Ships in 2 Business Days

$ 19.00 USD

Add to Wish List

Qty

$ 19.00 USD

Add to Wish List

Suvneer Wheel Hanger - M12 X 1.25 - Red

Specifically for vehicles using M12 x 1.25 wheel bolts

T#:51356108

Part#: WHLHGR-12125-RD

Ships in 5 Business Days

$ 17.00 USD

Add to Wish List

Qty

$ 17.00 USD

Add to Wish List

Take the heavy lifting out of your next wheel rotation with the Suvneer Motorsports™ Wheel Hanger in Red.

Protective Wheel Saver Socket - 17mm

T#:31390606

Part#: PROWHEELSOCKET17

Ships in 1 Business Day

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Protective Wheel Saver Socket - 17mm is designed to safeguard your valuable rims from damage during removal and installation. Featuring a synthetic polymer sleeve and insert, this socket ensures that your rims remain free from scratches or signs of wear while unscrewing and tightening lugs.

Protects Wheels: The synthetic polymer sleeve and insert protect both factory and aftermarket wheels from scratches and damage.
Versatile Use: Suitable for painted, clear-coated, chrome, factory, and other wheel finishes.
Durable Construction: The six-point design and large contact surfaces help distribute stress and prevent damage.
Wide Compatibility: Fits all 1/2" drive sockets, tools, and air tools, making it ideal for home use as well as rugged enough for professional shop use.
Corrosion-Resistant: Made from heavy-duty materials that resist rust and corrosion, ensuring longevity.
Essential Tool: A must-have for any serious enthusiast’s toolbox or for use at the shop when servicing your vehicle.
Fits Various Vehicles: 17mm size is compatible with most BMW, MINI, Mercedes-Benz, Audi, VW, 2020+ Supra, and other vehicles with 17mm lug nuts.

This rugged and compact socket is perfect for maintaining your wheels and ensuring they stay in pristine condition.

Show More Show Less