BMW 6 Series F06 (2013+)

Enhance your BMW's performance with the upgraded BAV Ignition Coil, designed to boost firepower and optimize engine efficiency. These coils boast modified core windings for a faster, more efficient burn, resulting in increased torque at lower RPMs and heightened horsepower in the upper range. While improvements depend on your engine's condition, these coils ensure noticeable enhancements in performance and potential fuel economy benefits.

Product Benefits:

Improved engine firepower and efficiency
Increased torque at lower RPMs
Enhanced horsepower in higher ranges
Potential improvement in fuel economy
Set of six for complete BMW Cooper replacement

Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees! 

Key Features:

• 2" wide x 1/16" thick
• Durable, tightly woven, 100% fiberglass
• Reduce under hood temperatures
• Protect other engine components
• Protect your hands/arms from burns
• Each roll comes with 5 FREE, 14" long stainless steel zip ties

The NOCO GBC003 Boost HD Precision Battery Clamps are heavy-duty clamps crafted for use with 12-volt gas and diesel engines. These clamps feature a needle-nose profile, allowing them to fit any shape or size battery terminal, from small terminals in tight spaces to top and side post batteries, as well as large terminal sizes. Their robust and rugged springs ensure maximum current flow with minimal power loss. Additionally, the Boost HD Precision accessory boasts no-melt and smoke-free properties, high current transferability, and reinforced all-metal construction.

Features: 

• Heavy-duty battery clamp designed for both 12-volt gas and diesel engines.
• Needle-nose clamp profile for jump starting hard-to-reach and oversized battery terminals.
• Made from durable, heat stabilized 8 AWG silicone wire that maintains its flexibility in cold weather environments.
• Engineered to efficiently transfer maximum current flow with minimal power loss.
• Compatible with the GB20, GB40, GB50, and GBX45 UltraSafe Lithium Jump Starters.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

52mm Prosport Electrical Boost Gauge - Clear Lens/White LED is an essential tool for any supercharged or turbocharged vehicle. This precision gauge allows drivers to monitor boost levels with accuracy and style, ensuring peak performance and optimal engine tuning.

• Accurate Boost Monitoring: Provides precise readings of boost pressure, essential for maintaining peak performance.
• Clear Lens: Offers a clear view of gauge readings under various lighting conditions.
• White LED Backlighting: Ensures easy readability and a stylish appearance, even in low-light environments.
• Durable Construction: Built to withstand high-performance conditions and continuous use.
• Easy Installation: Designed for straightforward installation with included mounting hardware.

Enhance your BMW's engine performance monitoring with the Wideband Air Fuel Ratio Gauge. This gauge features an Amber LCD Display and provides precise readings with its 0-5 volt output signal. Powered by the latest Bosch wideband O2 sensor, this gauge offers the widest range of AFR readings from 10.0:1 to 20.0:1. With its intuitive design, the gauge displays AFR levels in real-time, changing from green (Rich) to Yellow (Optimal) to Red (Lean) for immediate reference.

Key Benefits:

• Wide range of AFR readings for comprehensive engine monitoring
• Amber LCD display ensures clear visibility in various lighting conditions
• Bar-graph LED indicators provide quick reference to AFR levels
• Complete kit includes all necessary components for easy installation
• Plug and play design for hassle-free setup
• 0-5 volt output signal enables data logging for performance analysis

Upgrade your BMW's monitoring capabilities with the Wideband Air Fuel Ratio Gauge, providing accurate AFR readings and intuitive display features.

The NOCO GBC010 12V Accessory Kit is designed to connect directly to the XGC IN and OUT ports of NOCO Boost jump starters. This kit allows you to effortlessly power your preferred 12-volt devices directly from a GB70, GB150, GB250+, GB251+, or GB500+, such as a tire inflator, vacuum, coffee maker, fan, cooler, and more. Constructed from high-conductivity 16AWG 100% copper wire, it boasts a rated capacity of 15 amperes.

Features: 

• Recharge NOCO Boost UltraSafe Lithium Jump Starters from a vehicles 12-volt power source.
• Compatible with NOCO Boost UltraSafe Lithium Jump Starter models GB70, GB150 GB250+, GB251+ and GB500+.
• Power 12-volt device like a tire inflator, vacuum and more.
• High-conductivity 16 AWG copper wire and rated capacity of 15-amperes.
• Molded strain reliefs prevent unwanted strain on the XGC wire connections.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

The GENPRO10X2 is an upgraded version of our GEN2 with enhanced features. This model is 19% smaller yet delivers 33% more power, making it one of the most high-performing onboard marine battery chargers NOCO has ever produced. It's a two-bank onboard battery charger with a 20-amp rating (10 amps per bank) designed for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries. You can independently charge and control each battery bank using selectable charging modes such as 12V, 12V AGM, 12V Lithium, and 12V Repair Mode, suitable for all types of lead-acid and lithium-ion batteries.

Features: 

• A two-bank on-board battery charger rated at 20-amps for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries.
• Independently charge and control each battery bank with selectable charging modes - including 12V, 12V AGM, 12V Lithium, and 12V Repair Mode - for all types of lead-acid batteries.
• An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
• Charges batteries as low as 1-volt. Or use the all-new force mode that allows you to take control and manually begin charging dead batteries down to zero volts.
• Automatically detects battery sulfation and acid stratification to restore lost battery performance for stronger engine starts and extended battery life.
• It's not just a trickle charger; it's an advanced battery maintainer. A fully automatic, worry-free battery charger for everyday use - 24/7 - with zero overcharge.
• A simplified mounting system allows for quick and easy installations in any direction - even up-side-down - with an integrated anti-vibration backing to isolate shock, vibration, and noise.
• A fully-sealed and waterproof onboard battery charger with an ingress protection rating of IP68, but has survived brutal life cycle testing, including thousands of hours underwater.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.