BMW Suspension Parts for BMW 6 Series F06 (2013+)

BC Racing DS Series Coilover Kit - F06 640i 650i

T#:598293

Part#: I-45-DS

Back Ordered

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.

Show More Show Less

Bilstein Coil Over Spanner Wrench Set (Notch Style)

10X Entries Into Our F80 M3 Sweepstakes

T#:1702

Part#: 19101X

In Stock

$ 22.03 USD

Add to Wish List

Qty

$ 22.03 USD

Add to Wish List

Bilstein Coil Over wrench set for some PSS, PSS9 and PSS10 kits. Consists of a Large wrench and a Small wrench for adjusting the spring perch (76.25mm) and lock ring (75.75mm) on coil overs that require the rectangular notch style head (not round pin style adjuster). Can also be used with other coil over kits (H&R, Moton, JRZ, etc).

Show More Show Less

Bilstein B4 OE Replacement Rear Shock - F10 528/535/550 xDrive (W/O A...

For vehicles without Adaptive Drive or EDC

10X Entries Into Our F80 M3 Sweepstakes

T#:598756

Part#: 19-274300

In Stock

$ 129.00 USD

Add to Wish List

Qty

$ 129.00 USD

Add to Wish List

Bilstein B4 OE Replacement Series gas pressure shocks and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.

Show More Show Less

BC Racing Rear Damping Adjustment Extenders - BR Type

T#:555864

Part#: DMP-EXT

Back Ordered

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

The rear damping adjuster on coilovers is usually hidden under a bunch of hard to reach interior panels requiring you to remove carpet, panels and sometimes even the rear seat back in order to adjust the dampening on your BC rear coilovers. The BC Racing rear extender adjuster allow you to make these adjustments without removing the rear interior. Simple make two small holes in the interior above the adjuster and the extension can be passed through the interior panels. Now the adjustments can be performed from above.

Show More Show Less

Bilstein B6 Performance REAR Shock - F10 528i, 535i, 550i

10X Entries Into Our F80 M3 Sweepstakes

T#:21482

Part#: 24-176255

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Position: Rear Left or Right
Setting: Performance, for stock suspensions, non EDC

Rear Bilstein B6 Performance shock. Performance shocks are for cars with the standard, factory suspension. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. Includes top nut. Price is per shock.

This item fits the following BMWs:
2011+ F10 BMW 528i 535i 550i with standard suspension
not for cars with self-leveling or EDC suspension.

Show More Show Less

Bilstein B4 OE Replacement Strut - Front Right - F10 528/535/550 xDri...

For vehicles without Adaptive Drive or EDC

10X Entries Into Our F80 M3 Sweepstakes

T#:5322941

Part#: 22-265531

Back Ordered

$ 209.00 USD

Add to Wish List

Qty

$ 209.00 USD

Add to Wish List

Bilstein B4 OE Replacement dampers are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.

Show More Show Less

B6 Performance Strut Assembly - Front Left

10X Entries Into Our F80 M3 Sweepstakes

T#:6972542

Part#: 22-265555

In Stock

$ 271.00 USD

Add to Wish List

Qty

$ 271.00 USD

Add to Wish List

Setting: Performance, for stock suspensions Front Bilstein B6 Performance shock. Performance shocks are for cars with the standard, factory suspension. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. Includes top nut. Price is per shock. This Performance Front shock fits the following BMWs: BMW 528i xDrive 2016-2012, 535d xDrive 2016-2014, 535i xDrive 2016-2011, 550i xDrive 2016-2011, 640i xDrive 2018-2014, 640i xDrive Gran Coupe 2019-2014, 650i xDrive 2018-2012, 650i xDrive Gran Coupe 2019-2013

Show More Show Less

Bilstein B4 OE Replacement Strut - Front Left - F10 528/535/550 xDriv...

For vehicles without Adaptive Drive or EDC

10X Entries Into Our F80 M3 Sweepstakes

T#:5322940

Part#: 22-265524

Ships on Jan 29, 2027

$ 209.00 USD

Add to Wish List

Qty

$ 209.00 USD

Add to Wish List

Bilstein B4 OE Replacement dampers are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.

Show More Show Less

B6 Performance Strut Assembly - Front Right

10X Entries Into Our F80 M3 Sweepstakes

T#:6972541

Part#: 22-265562

Back Ordered

$ 271.00 USD

Add to Wish List

Qty

$ 271.00 USD

Add to Wish List

Bilstein's B6 gas shock absorbers are specifically engineered to be the best choice for maintaining comfort but not sacrificing performance. They perceivably enhance safety and performance without additional spring exchange. Bilstein fine tuned and tested these shocks for maximum comfort, durability, and performance to take your car to the next level.

Show More Show Less

F06/F10 B4 Rear Shock Absorber - Priced Each

10X Entries Into Our F80 M3 Sweepstakes

T#:344443

Part#: 19-193311

In Stock

$ 121.00 USD

Add to Wish List

Qty

$ 121.00 USD

Add to Wish List

Bilstein B4 OE Replacement Series gas pressure shocks and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.

Show More Show Less

Bilstein B8 Performance Plus FRONT LEFT Shock - F10 528i, 535i, 550i ...

For vehicles without Adaptive Drive

10X Entries Into Our F80 M3 Sweepstakes

T#:21483

Part#: 24-178501

In Stock

$ 329.00 USD

Add to Wish List

Qty

$ 329.00 USD

Add to Wish List

Position: Front Left
Setting: Sport, for factory sport or aftermarket lowered suspensions, non EDC

Front Bilstein B8 Performance Plus shock. Sport shocks are for cars lowered from the factory ride height and are about 20% stiffer than the factory shocks. Sport shocks work great with lowering springs such as H&R or Eibach. Includes top nut. Price is per shock.

This item fits the following BMWs:
2011+ F10 BMW 528i 535i 550i with sport or lowered suspension
not for cars with self-leveling or EDC suspension.

Show More Show Less

Bilstein B6 Performance FRONT LEFT Shock - F10 528i, 535i, 550i, F13 ...

For vehicles without Adaptive Drive

10X Entries Into Our F80 M3 Sweepstakes

T#:21480

Part#: 24-178488

Ships in 1 Business Day

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

Position: Front Left
Setting: Performance, for stock suspensions, non EDC

Front Bilstein B6 Performance shock. Performance shocks are for cars with the standard, factory suspension. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. Includes top nut. Price is per shock.

This item fits the following BMWs:
2011+ F10 BMW 528i 535i 550i with standard suspension not for cars with self-leveling or EDC suspension.
2012+ F12 BMW 640i 650i with standard suspension not for cars with self-leveling or EDC suspension
2013+ F06 BMW 640i Gran Coupe 650i Gran Coupe with standard suspension not for cars with self-leveling or EDC suspension

Show More Show Less

Powerflex Front Upper Thrust Arm Inner Bushing - Race - F10 F06/13 ...

T#:591245

Part#: PFF5-6101BLK

Ships in 1 Business Day

$ 137.99 USD

Add to Wish List

Qty

$ 137.99 USD

Add to Wish List

Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more than it should. You get sloppy steering, vibrations, and poor handling which makes the car feel unstable. These urethane bushings are stiffer than stock rubber and will not deflect as much. This helps keep the alignment in check with less variation. The car feels more planted and confidence-inspiring. And a lifetime warranty means you'll likely never have to pay for another bushing ever again! Powerflex is the number one selling suspension bushing manufacturer in Europe. Their experience with polyurethane bushing material and state-of-the art manufacturing techniques allows them to produce premium performance bushings, made to exact-fit standards. Powerflex performance polyurethane bushings are built to last longer than OEM rubber bushings, while improving performance and allowing for a more engaging driving experience. Powerflex has extensive knowledge and design experience in automotive suspension and chassis systems. These design skills have been combined with advanced polyurethane manufacturing techniques leading to the development of a wide range of high-performance automotive polyurethane components that are second to none in quality and performance. The special type of polyurethane used by Powerflex is an advanced proprietary material which has unique properties. This ensures that each product not only offers the high-performance capabilities our customers expect, but also the exceptionally long life and quality they demand - without increased vibration or noise.

Show More Show Less

Powerflex BMW F10/F11 Rear Sway Bar Bushing - 15mm

T#:34549565

Part#: PFR5-6013-15BLK

Ships in 1 Business Day

$ 76.99 USD

Add to Wish List

Qty

$ 76.99 USD

Add to Wish List

The Powerflex Rear Sway Bar Bushing for the BMW F10/F11, designed specifically for a 15mm sway bar, is an excellent performance upgrade that enhances the vehicle's handling and stability. By replacing the factory rubber bushings with high-quality polyurethane, this component delivers several key advantages.

Key Features:

Improved Cornering Stability: The firmer polyurethane construction significantly reduces flex in the sway bar, resulting in minimized body roll during cornering. This enhancement leads to improved traction and a more controlled driving experience, particularly during aggressive maneuvers.
Superior Durability: Engineered to withstand harsh driving conditions, these bushings resist wear and tear from oil, heat, and road debris. Unlike traditional rubber bushings that may degrade over time, Powerflex bushings maintain their performance and integrity longer.
Enhanced Driver Feedback: By limiting unwanted movement in the sway bar assembly, these bushings provide better steering feedback and responsiveness. Drivers will notice an increase in steering precision, resulting in a more engaging and connected driving experience.
Direct Fit for Simple Installation: Tailored specifically for the BMW F10/F11 models with a 15mm rear sway bar, these bushings offer a precise fit and allow for easy installation without the need for modifications or special tools.

This upgrade is ideal for BMW F10/F11 owners looking to elevate their vehicle's handling capabilities and overall driving performance. The Powerflex Rear Sway Bar Bushing is a reliable choice for enhancing the effectiveness of the rear suspension, making it suitable for both everyday driving and spirited performance applications.

Show More Show Less

Bilstein B6 Performance FRONT RIGHT Shock - F10 528i, 535i, 550i F13 ...

For vehicles without Adaptive Drive

10X Entries Into Our F80 M3 Sweepstakes

T#:21481

Part#: 24-178495

Special Order: No Guaranteed ETA

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

Position: Front Right
Setting: Performance, for stock suspensions, non EDC

Front Bilstein B6 Performance shock. Performance shocks are for cars with the standard, factory suspension. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. Includes top nut. Price is per shock.

This item fits the following BMWs:
2011+ F10 BMW 528i 535i 550i with standard suspension not for cars with self-leveling or EDC suspension.
2012+ F12 BMW 640i 650i with standard suspension not for cars with self-leveling or EDC suspension
2013+ F06 BMW 640i Gran Coupe 650i Gran Coupe with standard suspension not for cars with self-leveling or EDC suspension

Show More Show Less

Bilstein B8 Performance Plus Sport Shocks - F10 528/535/550 RWD, F06 ...

For vehicles without Adaptive Drive

10X Entries Into Our F80 M3 Sweepstakes

T#:21479

Part#: TMS21479

Ships on Jan 29, 2027

$ 1,076.00 USD

Add to Wish List

Qty

$ 1,076.00 USD

Add to Wish List

The Bilstein B8 Sport shocks are intended as replacements for the factory Sport package shocks or to be used when lowering the F10 chassis using aftermarket springs. The B8 Sport shocks are approximately one inch shorter than the standard shocks which helps keep the suspension composed with shorter springs. These performance Sport shocks are a bit stiffer than the original F10 5-series shocks which will provide a slight handling improvement without loss of ride comfort. Bilstein uses a unique and patented valving system to stiffen the shock while still keeping the ride comfortable over rough surfaces. The stiffer shocks will control body motions better than the original BMW shock absorbers which means less brake dive, body roll in corners, and squat under acceleration. These are a great handling upgrade without resorting to springs or coil overs. Bilstein shocks come with a limited lifetime warranty and install with all of the stock mounting pieces for a seamless shock replacement.

This discounted package price is for a set of 4 Bilstein Sport shocks, including:
24-178501, front left shock
24-178518, front right shock
24-178525, rear shocks (x 2)

These Bilstein Sport shocks are direct replacement for the BMW factory sport shocks. These are also the recommended shock to use when lowering the F10 5-series with H&R, Eibach, or other aftermarket springs. A shorter shock is ideal because it keeps a shorter spring in place better than the original or HD shocks.
Not for cars with EDC electronically adjustable shocks unless EDC has been properly removed from the vehicle.

This item fits the following BMWs:
2011+ F10 BMW 528i 535i 550i with factory sport suspension
2011+ F10 BMW 528i 535i 550i with aftermarket lowering springs
not for cars with self-leveling or EDC suspension.

Show More Show Less

Bilstein B8 Performance Plus FRONT RIGHT Shock - F10 528i, 535i, 550i...

For vehicles without Adaptive Drive

10X Entries Into Our F80 M3 Sweepstakes

T#:21484

Part#: 24-178518

Special Order: No Guaranteed ETA

$ 329.00 USD

Add to Wish List

Qty

$ 329.00 USD

Add to Wish List

Position: Front Right
Setting: Sport, for factory sport or aftermarket lowered suspensions, non EDC

Front Bilstein B8 Performance Plus shock. Sport shocks are for cars lowered from the factory ride height and are about 20% stiffer than the factory shocks. Sport shocks work great with lowering springs such as H&R or Eibach. Includes top nut. Price is per shock.

This item fits the following BMWs:
2011+ F10 BMW 528i 535i 550i with sport or lowered suspension
not for cars with self-leveling or EDC suspension.

Show More Show Less

BMW F0X / F1X / F7X / F85 Race Polyurethane Front Sway Bar Bushing Se...

T#:379919

Part#: PFF5-1404BX2

Back Ordered

$ 77.99 USD

Add to Wish List

Qty

$ 77.99 USD

Add to Wish List

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.

This part fits the following BMWs:
2007 - 2011 E70 X5 3.0sd X5 3.0si x5 4.8i
2012 - 2013 E70 X5 xDrive35d X5 xDrive35i X5 xDrive50i
2008 - 2014 E71 X6 xDrive35i X6 xDrive50i
2008-2014 E71 X6M

Show More Show Less

B4 OE Replacement Rear Strut - Priced Each - F06

10X Entries Into Our F80 M3 Sweepstakes
For vehicles without EDC

T#:2914133

Part#: 19-319377

Ships in 3 Business Days

$ 131.00 USD

Add to Wish List

Qty

$ 131.00 USD

Add to Wish List

Bilstein B4 OE Replacement Series gas pressure shocks and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.

Show More Show Less

Bilstein B4 OE Replacement Shocks & Struts Package - BMW F06 640/650i...

For vehicles without Adaptive Drive

10X Entries Into Our F80 M3 Sweepstakes

T#:5362938

Part#: 22-265524KT1

Back Ordered

$ 742.99

This product was last offered at the strikethrough price on
05-07-2026

$ 680.00 USD

Add to Wish List

Qty

$ 680.00 USD

Add to Wish List

Bilstein strut/shock package for stock springs. Set includes 2 front Bilstein B4 OE Replacement struts and 2 rear Bilstein B4 OE Replacement shocks. Bilstein B4 Series gas pressure shocks and struts are specifically designed to be the economical choice for replacing the dampers on your vehicle. The B4 Series shocks and struts are rigorously engineered to meet OE standards and identically replicate the original ride quality of your vehicle. Shock dampening and rebound is set to match the original specifications from the factory to retain the same handling, stability, and ride comfort, but with the superior Bilstein quality for a long life and consistent performance in every condition. Lifetime warranty!

Show More Show Less

Bilstein B6 Performance Shocks & Struts Set - F10 528i 535d 535i 550i...

For vehicles without Adaptive Drive

10X Entries Into Our F80 M3 Sweepstakes

T#:5309614

Part#: 24-178488KT2

Ships on Jan 29, 2027

$ 1,116.99

This product was last offered at the strikethrough price on
07-30-2026

$ 996.00 USD

Add to Wish List

Qty

$ 996.00 USD

Add to Wish List

Bilstein strut/shock package for stock springs. Set includes 2 front Bilstein B6 Performance shocks and 2 rear Bilstein B6 Performance shocks. Includes top nuts and rear lower shock washers. The stock rear dust boots are re-used. The Bilstein B6 Performance Shock is designed for use with stock springs. These shocks provide improved handling and stability without sacrificing ride comfort.

Show More Show Less

Bav Auto Shock and Strut Nut Tool

10X Entries Into Our F80 M3 Sweepstakes

T#:580394

Part#: B8800081

In Stock

Sale - Save 5% $ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Qty

Sale - Save 5%

$ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Used to install or remove shock and strut nuts - no more using an impact gun!

Bav Auto Scissor Type Ball Joint / Tie Rod Separator

10X Entries Into Our F80 M3 Sweepstakes

T#:580366

Part#: B8800042

Ships on Feb 19, 2027

Sale - Save 15% $ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD

Add to Wish List

Qty

Sale - Save 15%

$ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD

Add to Wish List

Use this tool to separate control arm ball-joints and larger tie-rod end joints. This tool is particularly beneficial when dealing with tight locations that prevent the use of non-scissor separator tools. Note that max jaw opening is 1 3/4".

Show More Show Less

Bav Auto Trailing Arm Inner Bushing Tool - Master Set

10X Entries Into Our F80 M3 Sweepstakes
Be sure to add some grease to the rods in this tool set during installation to prevent breakage.

T#:580442

Part#: B8800137

In Stock

Sale - Save 3% $ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Qty

Sale - Save 3%

$ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Remove and install the two rear inner trailing arm / lower control arm bushings that are in the subframe with one tool set without removing the trailing arms from the vehicle. This tool is designed to work with all trailing arm bushing designs on E82, E84, E90 ,E91, E92, E93 model cars. Replaces bushing part #'s 33326770829 and 33326763092.

Show More Show Less