BMW Brakes & Brake Parts for BMW 6 Series F06 (2013+)

PRESSURE BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

FLUID CATCH BOTTLE:

keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

Includes:

• 3 Liter (3.17 qts) storage tank
• Pressure cap with 0-30 lb gauge and pressure relief valve
• 40" hose
• Dual preventative fittings on the hose, featuring a chrome quick coupler on one end to snap onto the master cylinder cap and a detachable swivel fitting on the other end

Note:

• Recommend working at 10 PSI
• Dimensions for cap seal: 12x21x4 mm
• LIFETIME REPLACEMENT

CATCH BOTTLE:

Keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

CALIPER HOOK SET:

Tired of messing with bent coat hangers or bungee cords to hang your calipers up and out of the way when performing brake maintenance? These hooks make working on your brakes easier by letting you hang your calipers with ease, no more fighting with the bungee cords or zip ties to hold the caliper just right or having to make your own "custom" hooks with wire.

• Holds brake calipers out of the way while working on brakes
• Also use to hang other automotive parts and tools while working on your vehicle.
• Stronger than zip ties or wire.
• Save the brake hose by not hanging caliper by hose.
• Made of  thick steel for strength and durability. length is 8"

BILLET ALUMINUM CAP:

This aluminum cap with 90 degree swivel will work with our T#363245 Euro bleeder or our T#366970 3-Liter Multi-functional Fluid Pump Kit.

Features an all aluminum 45mm cap with quick coupler nipple.

BLEEDER WRENCH:

Finally, a bleeder wrench with just the right angle to open the bleeder screw without having to spend all that time removing each wheel from your car.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Ceramic Brake pads have advanced a great amount and show drastic advantages over traditional metallic and semi-metallic brake pads. Akebono in particular has been producing brake pads for major brands for years and their Euro brake pads have seen use in over 90 models of vehicles as the OE brake pads, ensuring high, consistent quality.

Thanks to Akebono’s pad formulation, you can enjoy many benefits including:

• Reduced Heat Absorption
• Reduced Brake Fade
• Reduced Stopping Distances
• Significantly Less Brake Dust
• Increased Brake Rotor Life

This item fits the following BMWs:

2013-2015 F06/12/13 BMW 640i/i xDrive Gran Coupe

2011-2015 F10 BMW 528i, 535d/xDrive, 535i/xDrive, ActiveHybrid 5

BRAKE CALIPER PISTON TOOL SET:

The Schwaben 18-piece disk brake retractor tool kit screws brake caliper pistons back into their bores to make room needed for new brake pads. An essential tool for working on calipers with threaded pistons, the kit comes with both right-hand and left-hand thread screw jacks, press plate, and 15 different diameter press disks to fit a wide variety of vehicles, both import and domestic, including Audi, BMW, Ford, GM, Honda, Mazda, Mitsubishi, Subaru, Toyota, Volkswagen and others.

Made of 100 percent chromalloy steel for strength, durability, and long service life.

PROTECTA SOCKET SET:

Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

Features:

• Coated six-point deep-well impact sockets 
• Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
• 17mm, 19mm and 21mm Sockets included

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Combine these with our torque limiting sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.

CALIPER HOOK SET:

• Tired of messing with bent coat hangers or bungee cords to hang your calipers up and out of the way when performing brake maintenance? These hooks make working on your brakes easier by letting you hang your calipers with ease, no more fighting with the bungee cords or zip ties to hold the caliper just right or having to make your own "custom" hooks with wire.
• Holds brake calipers out of the way while working on brakes
• Also use to hang other automotive parts and tools while working on your vehicle.
• Stronger than zip ties or wire.
• Save the brake hose by not hanging caliper by hose.
• Made of  thick steel for strength and durability. length is 8"

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Pagid Coated Front Brake Rotor (374 Mm) with Riveted Rotor Hat is a high-performance, corrosion-resistant brake rotor designed specifically for BMW vehicles. Available through Turner Motorsport, this 374 mm front brake rotor by Pagid delivers superior stopping power, reliability, and longevity for drivers who demand excellence from their braking system. With its advanced coating, this rotor provides robust protection against rust and corrosion, ensuring it remains durable under various weather conditions. Its precision engineering guarantees a perfect fit for BMW models, making it an ideal upgrade or replacement.

Constructed with high-quality materials, the Pagid Coated Front Brake Rotor minimizes noise and vibration while enhancing overall braking efficiency, making it perfect for daily driving and high-performance needs alike.

• Outstanding Braking Performance: Offers powerful and responsive braking for enhanced safety
• Corrosion-Resistant Coating: Protects against rust, extending the rotor’s lifespan
• Quiet Operation: Reduces noise and vibration, ensuring a smooth, comfortable driving experience
• Perfect Fit for BMW: Engineered for seamless compatibility with BMW models, simplifying installation
• Enhanced Durability: Designed to withstand the demands of daily use and high-performance driving

Upgrade your BMW’s braking system with Pagid Coated Front Brake Rotor (374 Mm) from Turner Motorsport for reliable, high-quality stopping power and long-lasting durability.

Pagid Coated Front Brake Rotor (374 Mm) is crafted to deliver exceptional braking power and durability for BMW owners who seek reliable, high-performance braking components. Available through Turner Motorsport, this premium front brake rotor from Pagid features an advanced anti-corrosion coating that protects against rust and extends the rotor’s lifespan, even in harsh weather conditions. Precision-engineered for BMW models, this rotor ensures a seamless fit, enhancing both safety and braking efficiency.

The Pagid Coated Front Brake Rotor is built to reduce noise and vibration, providing a smooth, quiet, and comfortable driving experience. Designed with premium materials, it offers lasting durability and is ideal for both daily driving and high-performance needs.

• Superior Braking Power: Delivers powerful, responsive stopping for enhanced driver safety
• Corrosion Protection: Coating resists rust and corrosion, ensuring long-term durability
• Quiet and Smooth Operation: Minimizes noise and vibration, creating a more comfortable ride
• Perfect Fit for BMW Models: Engineered specifically for BMW, allowing easy installation and precise fit
• Enhanced Durability: Built to withstand high-performance demands and routine wear, ensuring lasting performance

Choose Pagid Coated Front Brake Rotor (374 Mm) from Turner Motorsport to enjoy optimal braking performance and dependable durability for your BMW.