BMW Seats & Seat Accessories for BMW 6 Series F06 (2013+)

Clear BMW chassis
Whether you're building a track-only speed machine, show car, or ultra-serious street ride the seats can make an awesome upgrade. Aside from the obvious safety considerations with a seat, there are few upgrades that can have more of an impact in your driving experience. Sport or Race seats envelope and grip the driver's body, holding him/her in place even under extreme driving situations. When strapped into a seat with the appropriate harnesses you can become an integrated part of the car. Without the sliding around of stock seats you can have greater confidance and focus on the act of driving. Turner Motorsport is an authorized Recaro dealer and we use them in all of our racecars and high-level tuner project cars. We offer the full range of Recaro tuner and racing seats with mounts and adapters and other accessories.

Racing Seat Belt Harness Retaining Guide Collars (Pair)
Turner Motorsport - Corporate Logo
T#:339005
Part#: TIN9903150
In Stock
Starting at $79.90
Free Shipping on orders $99 and up
These little guys are one of our favorite final touches on a race car build. After years of requests, we now are able to supply these for more than just our race team's use. These aluminum collars bolt on your roll cage's harness bar (or any bar for that matter) and help keep your seat belt harnesses from sliding on the bar. You can use just one pair to accomplish this, or 2 pairs (4 collars total) for the best looking and functioning install. The beauty of these collars (besides being lightweight and looking clean) is that they can be adjusted from side to side, which is convenient if you change you seat or belt configuration. They can also be used for other applications as well, such as taming that helmet net strap. If you're looking for a clean, professional looking solution, these are a superb final touch. As used on our own Championship winning TMS E46 and E90 race cars.

We offer these guide collars in two sizes: for 1.5" OD roll bar tubing or for 1.75" OD roll bar tubing (choose your size below). Check your cage tubing diameter especially if your car was built in Europe as they used metric tubing sizes. If you need a metric size, contact us. Also measure with paint applied, not bare tubing. These are sold by the pair, so be sure to modifying your quantity below (or in the cart) if you need them for both seats.
OMP Alluminum low brackets - 16 holes  ¦  Black
OMP - Corporate Logo
T#:393736
Part#: HC/924
In Stock
$149.00
Free Shipping
Multi hole aluminium seat bracket in compliance with FIA Appendix J art. 253. New design, minimum 16 different positions. Length: 400 mm Thickness: 6 mm
OMP Racing Seat cushion for HTE  ¦  Black
OMP - Corporate Logo
T#:393793
Part#: HB/698
In Stock
$75.00
$52.50
Limited Qty Sale
Free Shipping on orders $99 and up
$75.00
$52.50
Limited Qty Sale
Free Shipping on orders $99 and up
Made specifically for the OMP HTE racing seat, this support cushion is covered with the same AIRTEXA(r) material for both style and high breathability, perfect for extra long track days! This pad attaches to the seat using simple Velcro strips.

OMP Steel low brackets - 16 holes  ¦  Black
OMP - Corporate Logo
T#:393734
Part#: HC/922
In Stock
$89.00
$75.65
Limited Qty Sale
Free Shipping on orders $99 and up
$89.00
$75.65
Limited Qty Sale
Free Shipping on orders $99 and up
Multi hole steel seat bracket in compliance with FIA Appendix J art. 253. New design, minimum 16 different positions. Length: 400 mm Thickness: 3 mm

Recaro Sportster CS Sport Seat
Recaro - Corporate Logo
T#:338964
Part#: TMS21549
Direct Ship
Starting at $1,499.00
Starting at $1,499.00
The Sportster CS seat is everything you wanted in a street sport seat. This seat doesn't just look cool - it's also a functional ergonomic improvement. This seat goes above and beyond any standard BMW seat to grip your body and keep you planted in the seat. Your whole body is supported - aggressive side and hip bolsters combine with wide shoulder supports and integrated headrest to properly support and protect your body during extreme driving. But Recaro has also focused on comfort by contouring the backrest to the natural shape of the human spine. The padding is thick and dense and the seat cushion has a built-in shock absorbing design. This seat will accept a standard 3-point seatbelt as well as a 4-point harness. The backrest folds forward for easy access to rear seats in a coupe body. The Sportster CS is the obvious choice, even for manufacturers like BMW, for a premium and functional ultra-sport seat.

Feedback from a Sportster CS user: "The phenomenological aspect that struck me the most, however, is just how much more a part of the car you feel when you are harnessed into these seats! I got a thrill from driving that I haven't had since I was in high school! It was that dramatic a change. The stock seats now seem like puffy cushions that float in disconnected fashion from the car and its movements. With the Recaros, you are one with the Beast. If I had known how dramatic a difference they would make, they would have been the first mod I made, without a doubt."

Seat Specs:
shell materialsteel base with composite backrest
fabric materialstandard: cloth or vinyl
fabric colorsblack
logo colorgrey
harness guidesYes, for 3 or 4 point
seat adjustmentsbackrest angle, fore-aft (with optional sliders)
seat mountbottom mount, adapter bracket included
slidersnot included
chassis mountsnot included
Fitment notes:
  • This is a bottom-mount seat with a Recaro seat adapter included. A vehicle-specific floor adapter plate is still required. This seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).
  • This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.
  • Recaro Pole Position Race Seat
    Recaro - Corporate Logo
    T#:340415
    Part#: TMS21541
    Direct Ship
    Starting at $1,098.00
    Starting at $1,098.00
    Famous Recaro brand quality in an entry level seat! The Recaro Pole Position is a fixed-back fiberglass shell with slots for racing harnesses. It's fully FIA approved which makes it suitable for nearly all ranges of racing series or for a track-only car. The sizing and shape of this seat is best-suited for small-medium sized drivers. This is a side-mount design and requires side mount brackets and vehicle-specific floor adapter. Sliders and additional seat cushions optional.

    Seat Specs:
    Shell Materialfiberglass-reinforced plastic
    fabric materialvelour
    fabric colorsblack, blue, red
    logo colorwhite or black depending on seat color
    harness guidesYes for 4, 5, or 6 point
    seat mountside mount, not included
    slidersnot included
    chassis mountsnot included

    Recaro Speed S Seat
    Recaro - Corporate Logo
    T#:340422
    Part#: RECARO-SPEED-S
    Direct Ship
    Starting at $949.00
    Starting at $949.00
    The Recaro Speed S seat is a street tuner seat inspired by Recaro's full motorsport seats but with lower cushion height to make it easier to get in and out. The Speed S has the same aggressive side bolsters with supportive shoulder extensions as the standard Speed seat. This is a very capable and supportive seat with all of the attributes of a race seat but with ergonomic features that make it suitable for street use. This seat can be used with the standard 3-point seatbelt or 4-point harness.

    Seat Specs:
    shell materialsteel frame
    fabric materialstandard: cloth; optional materials: suede, vinyl, saturn, velour
    fabric colorsstandard: black; custom colors available
    logo colorsilver, red, white, blue
    harness guidesYes, for 3 or 4 point.
    seat adjustmentsbackrest angle, fore-aft (with optional sliders)
    seat mountbottom mount
    slidersnot included
    chassis mountsnot included
    Fitment notes:
  • This is a bottom-mount seat and seat adapters are not included. A vehicle-specific floor adapter plate is required. The seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).
  • This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power and heat, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.
  • Side Mounts - Macht Schnell for Recaro Seats
    Recaro - Corporate Logo
    T#:338506
    Part#: 79.20.110B
    Direct Ship
    Starting at $112.34
    Starting at $112.34
    Racing and aftermarket seats require a mount to attach the seat to sliders or an adapter plate for the car. Most Recaro race seats are 'side-mount' which means the brackets attach to the side of the seat and then turn 90 degrees to mount to the floor (or sliders). These are made by Macht Schnell and made from steel for great strength and low cost. Sold as a pair to fit one seat. Fits the Recaro Pole Position, Profi, Profi XL, and Pro Racer seats. Note that these are not FIA approved. Choose from steel or aluminum above.

    Recaro Sportster CS Sport Seat (Heated)
    Recaro - Corporate Logo
    T#:340414
    Part#: TMS212713
    Direct Ship
    Starting at $1,649.00
    Starting at $1,649.00
    The Sportster CS seat is everything you wanted in a street sport seat. This seat doesn't just look cool - it's also a functional ergonomic improvement. This seat goes above and beyond any standard BMW seat to grip your body and keep you planted in the seat. Your whole body is supported - aggressive side and hip bolsters combine with wide shoulder supports and integrated headrest to properly support and protect your body during extreme driving. But Recaro has also focused on comfort by contouring the backrest to the natural shape of the human spine. The padding is thick and dense and the seat cushion has a built-in shock absorbing design. It also has a heated bottom cushion for additional added comfort (only on vinyl and leather materials). This seat will accept a standard 3-point seatbelt as well as a 4-point harness. The backrest folds forward for easy access to rear seats in a coupe body. The Sportster CS is the obvious choice, even for manufacturers like BMW, for a premium and functional ultra-sport seat.

    Feedback from a Sportster CS user: "The phenomenological aspect that struck me the most, however, is just how much more a part of the car you feel when you are harnessed into these seats! I got a thrill from driving that I haven't had since I was in high school! It was that dramatic a change. The stock seats now seem like puffy cushions that float in disconnected fashion from the car and its movements. With the Recaros, you are one with the Beast. If I had known how dramatic a difference they would make, they would have been the first mod I made, without a doubt."

    Seat Specs:
    shell materialsteel base with composite backrest
    fabric materialstandard: cloth or vinyl; optional: vinyl, leather
    fabric colorsstandard: black; optional: red, silver
    logo colorgrey, silver, red, black
    harness guidesYes, for 3 or 4 point
    seat adjustmentsbackrest angle, fore-aft (with optional sliders)
    seat mountbottom mount, adapter bracket included
    slidersnot included
    chassis mountsnot included
    Fitment notes:
  • This is a bottom-mount seat with a Recaro seat adapter included. A vehicle-specific floor adapter plate is still required. This seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).
  • This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power and heat, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.

  • Sabelt Taurus FIA Approved Racing Seat
    Sabelt - Corporate Logo
    T#:553625
    Part#: RFSETAURUS
    Direct Ship
    Starting at $910.00
    Free Shipping
    Starting at $910.00
    Free Shipping

    The Taurus racing seat from Sabelt starts with a classic shape and adds years of design and engineering excellence to bring a seat that is truly special.

    The shell is made from a lightweight gel-coated composite that holds the driver and protects along the sides of the seat as well. Head protection is achieved by way of side bolstering the blocks both sides of the drivers head from impact and these extend down into the shoulder area. Speaking of the shoulder bolsters, these particular ones are covered in a kinder point fabric which gives a "grippy" surface and helps to control upper body movement under high cornering forces. Moving further down the seat, the back and bottom are covered in a breathable mesh which helps to keep heat under control during long sessions. Leg bolstering is extra deep and will keep you in an upright and stable position and the VEP fabric covering ensures long-lasting durability. Finally, a crotch strap hole in the bottom of the shell makes this seat compatible with 6-point harnesses.

    Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

    Recaro Speed Seat
    Recaro - Corporate Logo
    T#:340421
    Part#: RECARO-SPEED
    Direct Ship
    Starting at $999.00
    Starting at $999.00
    The Recaro Speed is a street tuner seats inspired by Recaro's full motorsport seats. The Speed has very aggressive thigh and side bolsters with supportive shoulder extensions. This is a very capable and supportive seat with all of the attributes of a race seat but with ergonomic features that make it suitable for street use. This seat can be used with the standard 3-point seatbelt or 4-point harness. An option for a 5-point is available. This seat is very very close to the seats used in the special edition E30 M3 Sport Evolution model.

    Seat Specs:
    shell materialsteel frame
    fabric materialstandard: cloth; optional materials: suede, vinyl, saturn, jersey
    fabric colorsstandard: black; custom colors available
    logo colorbeige, silver, red, black
    harness guidesYes, for 3 or 4 point. 5 point optional.
    seat adjustmentsbackrest angle, fore-aft (with optional sliders)
    seat mountbottom mount
    slidersnot included
    chassis mountsnot included
    Fitment notes:
  • This is a bottom-mount seat and seat adapters are included. However, a vehicle-specific floor adapter plate is still required. The seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).
  • This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power and heat, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.
  • Recaro Pro Racer HANS SPA Kevlar Race Seat
    Recaro - Corporate Logo
    T#:340417
    Part#: TMS22128
    Direct Ship
    Starting at $3,029.00
    Starting at $3,029.00
    Recaro's safest racing seat! The Pro Racer HANS is designed to be fully compatible with the HANS safety system. The Pro Racer features more sculpting to the shell to allow more clearance between the seat and the HANS device around your neck and chest. Some other seats can push on the HANS and make it uncomfortable when it should be nearly transparent. This is also one of the most enclosing and protective seats on the market. Not only does it feature the integrated head protection, the side bolsters are taller than most seats and the shoulders feature an anti-slip surface to keep your body in place. But apart from being safe, this seat is comfortable too!

    This seat is available in the standard sizing as well as an optional XL size. See dimensions chart to the right.

    Pro Racer HANS Seat Specs:
    Shell MaterialKevlar carbon-fiber composite
    fabric materialvelo