BMW Engine Parts for BMW 6 Series F06 (2013+)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Bosch - Corporate Logo
T#:588121
Part#: 12138616153
In Stock
$ 34.99 USD
Free Shipping on orders $49 and up
Sluggish acceleration, misfires, and rusty terminals are symptoms of a worn coil. Located on the top of your engine, these coils should be inspected and replaced as needed or every 100,000 miles. Keep your ignition system in perfect order. Rubber integrated boot and snap-top cap. OEM Bosch Part Number: 0221504800
Show More Show Less
OEM Bosch Fuel Injector - EU6 Designation - N20/26 N55
For vehicles with production date from 07/2013
Bosch - Corporate Logo
T#:585581
Part#: 13648625397
In Stock
$ 133.99

This product was last offered at the strikethrough price on
06-22-2026

$ 109.99 USD
Free Shipping
$ 109.99 USD
Free Shipping
Replace your clogged or malfunctioning fuel injector with this Genuine BMW injector to restore proper engine idling and running conditions. Ensure that you need injector with EU6 designation before purchase. This fuel injector will not work with earlier EU5 version fuel rails and injector; non-exchangeable Replaces Genuine BMW part # 13648625397 and requires BMW part # 13537577649 for installation.
Show More Show Less
Bav Auto Spark Plug Socket 12" x 5/8"
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580385
Part#: B8800072
In Stock
Sale - Save 25% $ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.49 USD
Free Shipping on orders $49 and up
Magnetic insert holds the spark plug securely in place for easy installation. Works great on many twin can engines where the spark plugs are recessed deep in the cylinder head.

Burger Motorsports - Corporate Logo
T#:21045489
Part#: BMS-OFC
In Stock
Starting at $ 89.00 USD
Free Shipping on orders $49 and up
Starting at $ 89.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports V2 billet aluminum oil filter cover is a metal upgrade that directly replaces your weak OE plastic cap for greater protection, better cooling, ease of removal/install, and looks great under the hood. The built-in 21mm hex and a 3/8" drive socket wrench fitting that does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter cage. Anodized for protection. This quality part is a must for any serious BMW owner. Replaces OEM part number 11427525334 - BMW Oil filter cover. Features and Benefits Solid aluminum design is much stronger than brittle plastic 21mm hex head + 3/8" drive socket wrench fitting Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter cage and o-ring Anodized for protection Looks great under the hood Made in the USA
Show More Show Less

Bosch - Corporate Logo
T#:399809
Part#: 13537622231
In Stock
$ 56.95 USD
Free Shipping on orders $49 and up
This sensor monitors the pressure of the fuel coming from the high pressure fuel pump, looking for low pressure, to determine if your HPFP is functioning correctly.
OEM Bosch High Pressure Fuel Injector - EU5 - N63 S63 4.4L
For vehicles with a production date up to 07/2013 For vehicles with a production date up to 07/2014
Bosch - Corporate Logo
T#:594993
Part#: 13647599876
In Stock
$ 104.99

This product was last offered at the strikethrough price on
04-14-2026

$ 94.99 USD
Free Shipping
$ 94.99 USD
Free Shipping

Enhance engine performance and driveability in your BMW 4.4L N63/S63 with the Bosch Fuel Injector. Replace those old, dirty, high mileage fuel injectors with this specifically designed component from Bosch. Priced individually, this fuel injector ensures optimal fuel delivery, restoring efficiency to your BMW's engine.

  • Restores engine performance
  • Enhances driveability
  • Specifically designed for BMW 4.4L N63/S63 engines
  • Replaces old, dirty, high mileage fuel injectors
  • Ensures optimal fuel delivery
  • Priced individually for cost-effective replacement
  • High-quality Bosch brand reliability
Show More Show Less

Burger Motorsports - Corporate Logo
T#:27171925
Part#: UNI-BMS-PIPLUGS
In Stock
$ 60.00 USD
Free Shipping on orders $49 and up
These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.
Show More Show Less
Precision Raceworks Ethanol 360 Fittings - 5/16" (7.89mm)
Universal Product - Please confirm your fuel line size prior to ordering
Precision Raceworks - Corporate Logo
T#:37757295
Part#: 601-0240
In Stock
$ 89.99 USD
Free Shipping on orders $49 and up
$ 89.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks Ethanol 360 fuel line fittings are designed to work in almost any application where you have 5/16" or 7.89mm quick-connect fittings and need to add a flex fuel sensor. These fittings work with almost all ethanol sensors without the need to cut and splice or replace entire line sets. This is a perfect way to add an ethanol sensor to your vehicle while maintaining existing fuel lines.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:4333508
Part#: 201-0091
Back Ordered
$ 39.99 USD
Free Shipping on orders $49 and up
Replaces individual coils found in the Precision Raceworks Ignition Kit.

Burger Motorsports - Corporate Logo
T#:26404907
Part#: 12MMSPG
In Stock
$ 35.00 USD
Free Shipping on orders $49 and up

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

  • Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
  • Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
  • High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
  • Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less
DeatschWerks 255 LPH In-Tank Fuel Pump W/ Universal Set Up Kit ...
Not for sale or use in the state of California.
DeatschWerks - Corporate Logo
T#:34919033
Part#: 9-201-1000
In Stock
$ 109.00 USD
Free Shipping on orders $49 and up
Bosch - Corporate Logo
T#:591891
Part#: 13537620946
In Stock
$ 98.99

This product was last offered at the strikethrough price on
07-06-2026

$ 57.99 USD
Free Shipping on orders $49 and up
$ 57.99 USD
Free Shipping on orders $49 and up
A vital component for high pressure fuel system function


DeatschWerks 340 LPH In-Tank Fuel Pump with a Universal Set Up Kit ...
This is Universal and Not a direct replacement for the Genuine Pump!
DeatschWerks - Corporate Logo
T#:6091453
Part#: 9-301-1000
In Stock
$ 169.00 USD
Free Shipping
$ 169.00 USD
Free Shipping
DeatschWerks was founded in 2004 in Oklahoma and has dedicated themselves to providing high quality EFI applications to a wide variety of manufacturers. DW has developed a wide variety of innovative fuel system components including fuel pumps, modular surge tanks, conversion fuel rails, dual-stage fuel filters, and ethanol compatible fuel pressure regulators. The DW300 is DeatschWerks' flagship standard fitment in-tank pump. The DW300 flows 340lph at 40psi and is a popular choice for e85 applications or wherever the highest flowing standard fitment in-tank pump is needed. Quiet operation and pulse width modulation compatibility are delivered via the turbine impeller and computer balanced armature. E85 compatibility is built in via the carbon commutators and a fully encapsulated armature. All DW fuel pumps are backed by a 3-yr no fault warranty. Features: Weight 12.6 oz (360grams) 7.7mm ID/11mm OD inlet fitting Outlet 5/16" Hose Clamp Single Scroll Composite Turbine All instructions are also provided on DeatschWerks' website.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38094311
Part#: 201-0188
In Stock
$ 54.99 USD
Free Shipping on orders $49 and up

Port Injection Fuel Line For Top Mount Fuel Rail - N54 N55 is designed for seamless compatibility with most aftermarket intake manifolds featuring top mount port injection. It works with leading brands such as Black Market Parts, BKC, BMS, Sharp Custom, Doc Race, and more, ensuring a high-performance fuel delivery solution for BMW N54 and N55 engines.

Constructed with premium 6061 aluminum and anodized for 100% E85 compliance, this fuel line is engineered for durability and optimal fuel flow. The female quick connectors feature an air hose-style quick connect with dual seals (primary and secondary) to eliminate any risk of fuel leaks. Precision Raceworks utilizes Smooth Bore PTFE hose, a trusted component in high-end E85 applications worldwide.

This plug-and-play solution is fully compatible with both factory and aftermarket fuel lines, providing an easy, reliable way to supply fuel to the port injection system of your upgraded intake manifold.

  • Seamless fit – Compatible with most aftermarket top mount port injection manifolds
  • Durable construction – Machined from 6061 aluminum and anodized for E85 compatibility
  • Leak-proof design – Dual-seal quick connectors for maximum fuel safety
  • High-performance fuel delivery – Utilizes Smooth Bore PTFE hose for optimal flow
  • Easy installation – Direct plug-and-play with factory and aftermarket fuel lines
Show More Show Less
Bosch - Corporate Logo
T#:583739
Part#: 13518604232
In Stock
$ 286.99

This product was last offered at the strikethrough price on
07-19-2026

$ 217.99 USD
Free Shipping on orders $49 and up
$ 217.99 USD
Free Shipping on orders $49 and up

The most common reason fuel pumps fail is a plugged or restricted fuel filter, which makes the pump work harder. When a fuel pump starts to go bad, you may experience lack of power, no start, bucking, sputtering, or the engine may stop running. If this is occurring be sure to replace it before you are left without a working a vehicle.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Bav Auto Tools - Corporate Logo
T#:580444
Part#: B8800139
Ships in 7 Business Days
Sale - Save 5% $ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.79 USD
Free Shipping
Sale - Save 5%
$ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.79 USD
Free Shipping
Used in removal and installation of the front crankshaft seal on BMW N55 engines, a common job that you can save yourself a ton of money doing at home.

Bav Auto Fuel Injector Removal/Installation Tool - N55
For E - Chassis N55
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580388
Part#: B8800075
Ships on Feb 19, 2027
Sale - Save 20% $ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD
Free Shipping
Sale - Save 20%
$ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD
Free Shipping
This tool takes the stress and difficulty out of removing and installing your N55 fuel injectors.
Precision Raceworks - Corporate Logo
T#:38161701
Part#: 101-0257
In Stock
$ 49.99 USD
Free Shipping on orders $49 and up

Replacement Fuel Filter Element - 6 Micron | Precision Raceworks is designed for BMW and high-performance fuel systems, ensuring optimal fuel flow and superior filtration. This high-efficiency 6-micron filter element effectively captures contaminants, preventing debris from reaching fuel injectors and maintaining peak engine performance.

Regular maintenance of your fuel filter is essential for maximizing fuel system efficiency. Whether for racing or daily driving, this replacement element keeps your fuel system running at its best.

  • 6-micron filtration – Removes fine particles and contaminants to protect engine components
  • High-performance compatibility – Designed for use with Precision Raceworks inline fuel filters
  • Optimized fuel flow – Maintains consistent fuel delivery for peak performance
  • Durable construction – Engineered for long-lasting reliability in high-demand applications
  • Easy replacement – Simple installation for routine maintenance
  • Ideal for both street and track use – Ensures clean fuel supply for all driving conditions

Fuel Filter Replacement Guidelines:

  • Racing applications: Inspect at least twice per season and replace as needed
  • Daily driving: Inspect at least once a year or every 6,000 miles, replacing as necessary

Ensure your BMW fuel system stays clean and efficient with the Replacement Fuel Filter Element - 6 Micron | Precision Raceworks, the ultimate choice for maintaining performance and reliability.

Show More Show Less

OEM Bosch High-Pressure Fuel Pump & Fuel Filter - N55 3.0L
For vehicles with a production date from 03/2014 - Also fits models up to 03/2014 with ...
Bosch - Corporate Logo
T#:568683
Part#: 13518604231
In Stock
$ 311.99 USD
Free Shipping
$ 311.99 USD
Free Shipping
This is Bosch's updated high pressure fuel pump "HPFP" for BMW's with the N55 turbo engine. This fuel pump is the OEM equivalent to BMW part number 13518604231 and supersedes BMW part number 13517610761. Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Show More Show Less
Bav Auto Timing Tool Kit - N51 N52 N54 N55 S55
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580414
Part#: B8800107
Ships on Oct 21, 2026
Sale - Save 5% $ 371.99

This product was last offered at the strikethrough price on
05-03-2026

$ 353.39 USD
Free Shipping
Sale - Save 5%
$ 371.99

This product was last offered at the strikethrough price on
05-03-2026

$ 353.39 USD
Free Shipping
Sets cam, valve & VANOS timing on BMW N51, N52, N53, N54 & N55 engines. Includes camshaft fixture with hold-down bolts, 3 alignment gauges and TDC pin. A must when removing and replacing cylinder heads on these engines.
Show More Show Less

Precision Raceworks Ethanol 360 Fittings - 3/8" (9.49mm)
Universal Product - Please confirm your fuel line size prior to ordering
Precision Raceworks - Corporate Logo
T#:37892104
Part#: 601-0288
In Stock
$ 89.99 USD
Free Shipping on orders $49 and up
$ 89.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks Ethanol 360 fuel line fittings are designed to work in almost any application where you have 3/8" (9.49mm) quick-connect fittings and need to add a flex fuel sensor. These fittings work with almost all ethanol sensors without the need to cut and splice or replace entire line sets. This is a perfect way to add an ethanol sensor to your vehicle while maintaining existing fuel lines.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:38161736
Part#: 201-0405
In Stock
$ 24.99 USD
Free Shipping on orders $49 and up
This fitting allows you to install a 1/8" npt port anywhere you have an existing quick connect Compatible with the Motiv 0-10 Bar pressure sensor
Precision Raceworks - Corporate Logo
T#:3786918
Part#: 201-0002
In Stock
$ 69.99 USD
Free Shipping
$ 69.99 USD
Free Shipping
The Precision Raceworks N54 N55 Manifold Location Replacement Spark Plug Wires are the same wires that come with Precision Raceworks' BMW N54 and N55 High Performance Ignition Kits, featuring low-resistance, high-performance spark plug wires. These wires are 100% custom-designed from the ground up to meet or exceed OEM requirements and feature seals that are both dust and water resistant. These spark plug wires work with Precision Raceworks' BMW N54 and N55 High Performance Ignition Kits 601-0021 or 601-0149.
Show More Show Less
Bav Auto Fuel Injector Installer / Remover - N20/N55
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580389
Part#: B8800076
Ships on Oct 21, 2026
Sale - Save 10% $ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 96.29 USD
Free Shipping
Sale - Save 10%
$ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 96.29 USD
Free Shipping
This enables you to easily remove and install fuel injectors on BMW N20 and N55's produced from 2/2011 and up with direct injection.


Precision Raceworks - Corporate Logo
T#:1271579
Part#: 601-0021
Back Ordered
$ 479.99 USD
Free Shipping
$ 479.99 USD
Free Shipping
Rid your BMW's N54 or N55 engine of misfires, sluggish throttle response, rough idle, and power loss with Precision Raceworks' High-Performance Ignition Kit!
Bav Auto Media Blaster Kit - BMW N20 N54 N55
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:582473
Part#: B1100008
In Stock
Sale - Save 8% $ 329.99

This product was last offered at the strikethrough price on
05-03-2026

$ 303.26 USD
Free Shipping
Sale - Save 8%
$ 329.99

This product was last offered at the strikethrough price on
05-03-2026

$ 303.26 USD
Free Shipping
Carbon building up in your intake ports? Take care of it quick and easy with this DIY media blaster kit from Bav auto. This walnut shell media blaster kit contains everything you need to effectively clean and de-carbon the intake ports and valves on your turbocharged N20, N54, or N55 BMW engine. Taking your vehicle to the dealer to have this service performed, you would be looking at a cost of around $1000 or more! This kit saves you money and can be used as many times as you need to ensure perfectly clean intake ports for optimum airflow and performance. Included in this kit: 20lb pressure feed media blaster including water separator and pressure gauge blasting wand N54/N55 port adapter (attaches to your shop vac to catch the used media and deposits) 25lb package of walnut shell blasting media Use of this kit requires a medium sized air compressor (suggested minimum 20-30 gallon tank, 4.0 CFM @ 90psi), common "shop vac" and full hearing and eye protection. We recommend the use of a remote starter switch. Please note: Intake manifold gasket set and Throttle body gasket, sold separately, must be replaced when removing intake manifold.
Show More Show Less
Bav Auto Fuel Injector Seal Installer & Remover - N54/N63
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580445
Part#: B8800140
In Stock
Sale - Save 3% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD
Free Shipping
Sale - Save 3%
$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD
Free Shipping
This is has been specifically designed to remove and install the seals on your fuel injectors without damaging either the seals or injectors themselves.


Bav Auto Tools - Corporate Logo
T#:580412
Part#: B8800104
In Stock
Sale - Save 5% $ 147.99

This product was last offered at the strikethrough price on
05-03-2026

$ 140.59 USD
Free Shipping
Sale - Save 5%
$ 147.99

This product was last offered at the strikethrough price on
05-03-2026

$ 140.59 USD
Free Shipping
For removal and installation of the rear crankshaft seal on BMW N51, N52 and N54 engines.
Schley - Corporate Logo
T#:385905
Part#: SLY13400
Back Ordered
$ 99.99 USD
Free Shipping on orders $49 and up
Correct sockets designed to protect injectors that are easily damaged

Precision Raceworks - Corporate Logo
T#:38229099
Part#: 601-0108
In Stock
$ 479.99 USD
Free Shipping on orders $49 and up
Rid your BMW's N54 or N55 engine of misfires, sluggish throttle response, rough idle, and power loss with Precision Raceworks' High-Performance Ignition Kit!
Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 750cc - ...
NOT A DIRECT REPLACEMENT FOR FACTORY INJECTORS - For use with aftermarket port injectio...
Bosch - Corporate Logo
T#:36947243
Part#: 501-0028
In Stock
$ 409.99 USD
Free Shipping on orders $49 and up
$ 409.99 USD
Free Shipping on orders $49 and up
The Black Market Parts Genuine Bosch Motorsports EV14 fuel injectors featuring USCAR (EV6) connector matched and packaged in a pack of 6 units. Direct plug-in for Motiv Reflex, AIC, and Nexsys Motorsports
Show More Show Less

Bosch - Corporate Logo
T#:397340
Part#: 11787596924
In Stock
$ 163.84

This product was last offered at the strikethrough price on
05-19-2026

$ 162.15 USD
Free Shipping
$ 162.15 USD
Free Shipping

The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. Bosch's Oxygen sensors are high quality and will give you the the longest and best performance for the price.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
E82,E90,E92,E93,F30,F34

Fits BMW Engines including:
N55 - Up to 08/2013

Show More Show Less

Borescope Camera with Light For Phone
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:32450134
Part#: PHONEBORESCOPE
In Stock
Sale - Save 3% $ 58.99

This product was last offered at the strikethrough price on
05-03-2026

$ 57.22 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 58.99

This product was last offered at the strikethrough price on
05-03-2026

$ 57.22 USD
Free Shipping on orders $49 and up

The Borescope Inspection Camera offers 1920P HD resolution, a flexible 7.9mm probe, and a 16.4ft semi-rigid cable, making it ideal for inspecting hard-to-reach areas. Easily connect to IOS and Android devices, and use the IP67 waterproof probe for various applications, including automotive, plumbing, and home inspections.


Key Features:

  • 1920P HD Resolution: Capture clear images and high-quality video at 1920x1440 resolution.
  • Easy Connection: Connect quickly to IOS 9.0+ and Android 7+ devices via the 'SUP-ANESOK' app.
  • Semi-Rigid Cable: 16.4ft cable offers a mix of flexibility and rigidity for precise inspections.
  • Waterproof Probe: IP67-rated, capable of operating underwater up to 3.28 feet for 1 hour.
  • Wide Applications: Suitable for automotive, plumbing, and home inspections, with adjustable brightness for low-light environments.


Includes:

  • Borescope Camera
  • Android Adapter
  • Lightning Port Adapter
  • USB Type-C Connector
  • 16.4 ft. Semi-Rigid Cable
  • Magnet
  • Hook
  • Mirror
  • Protective Cap
  • Manual


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
Bav Auto Oil Filter Housing Cap Removal Tool - 1/2" Drive
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580338
Part#: B8800006
In Stock
Sale - Save 25% $ 33.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 33.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.49 USD
Free Shipping on orders $49 and up
Used to easily remove your oil filter housing cap without damaging it.
Bav Auto Torx head bolt socket - E12
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580351
Part#: B8800022
Ships in 7 Business Days
Sale - Save 25% $ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD
Free Shipping on orders $49 and up
This special long, thin, Torx socket is required for removal and installation of the head bolts on most BMWs with twin-cam cylinder heads. 1/2" drive


Precision Raceworks - Corporate Logo
T#:38195449
Part#: 501-0043
In Stock
$ 159.99 USD
Free Shipping on orders $49 and up
Adjust your fuel pressure as needed. Thanks to the 1:1 boost reference, fuel pressure will increase as boost pressure increases, ensuring fuel delivery remains optimal under all conditions.
Bav Auto Tools - Corporate Logo
T#:580431
Part#: B8800124
Ships in 7 Business Days
Sale - Save 15% $ 178.99

This product was last offered at the strikethrough price on
05-03-2026

$ 152.14 USD
Free Shipping
Sale - Save 15%
$ 178.99

This product was last offered at the strikethrough price on
05-03-2026

$ 152.14 USD
Free Shipping
For installation and removal of pressure springs on intermediate levers of valve train. Ensures quick, easy and safe handling of these high force springs.
Bosch - Corporate Logo
T#:585261
Part#: 11787614322
In Stock
$ 117.58 USD
Free Shipping
$ 117.58 USD
Free Shipping
This direct-fit Bosch oxygen sensor plugs directly into your factory connector. This is the post-cat sensor. No cutting or splicing required. A new oxygen sensor can improve driveability and lengthen engine life.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:40004858
Part#: 201-0261
Back Ordered
$ 1,799.00 USD
Free Shipping on orders $49 and up
The Precision Raceworks N55/S55 Upgraded DI Injectors are designed for customers looking to push the limits without port injection (or in addition to port injection). Our high flow injectors were developed in a partnership with NHP, taking advantage of resources offered by both companies to produce the highest quality and highest flowing direct injector upgrade ever for the N55 engine. These high flow injectors flow 85% over stock! Each injector is tested and calibrated using state of the art high pressure flow calibration equipment and then matched to a set of 6. Installation of these is a snap and is as simple as replacing your injectors, a little coding, and then checking a checkbox!
Show More Show Less

Precision Raceworks - Corporate Logo
T#:38161679
Part#: 201-0410
Ships in 8 Business Days
$ 49.00 USD
Free Shipping on orders $49 and up
Ideal for enthusiasts looking to optimize their vehicle’s fuel system, this ethanol sensor harness delivers precision and reliability for high-performance applications.
Precision Raceworks - Corporate Logo
T#:38094337
Part#: 201-0049
In Stock
$ 99.99 USD
Free Shipping on orders $49 and up
Precision Raceworks' BMW Secondary Pump Activation Harness is the top choice among pump manufacturers and tuners for controlling auxiliary fuel pumps. This kit is considered the most complete and highest quality kit on the market and is sold private label to many BMW pump manufacturers. That is why this harness is the #1 method of secondary pump control on the market around the globe.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:27171935
Part#: IRTHERM
Back Ordered
Starting at $ 318.99 USD
Free Shipping on orders $49 and up
Starting at $ 318.99 USD
Free Shipping on orders $49 and up
Precise Oil Temperature Control for Your BMW Upgrade your BMW N20, N26, N51, N52, N53, N54, N55, and S55 engine's oil temperature control with Improved Racing's high-performance oil cooler adapter. Designed to address flaws in the factory's restrictive oil cooler adapter and faulty internal flow control valve, this upgrade ensures precise oil temperature control. Improved Racing's thermostat provides quick engine warmup, prevents overcooling, and delivers full oil cooling capacity on demand. Trusted by professional race teams around the globe, Improved Racing's thermostats have proven highly reliable, are backed by a lifetime warranty, and are made in the USA. Option to Use the Factory Oil Cooler and Lines The optional factory oil line adapter allows you to use the factory oil cooler lines for a simple, plug-and-play installation. For maximum performance, the factory oil cooler and lines may be replaced with an aftermarket cooler and AN lines using the AN adapter fittings (-10AN line size is recommended). ​Please note that some applications, such as most BMW SUV's, use a water-to-oil heat exchangers. These applications require plugging the coolant supply and return ports, as well as adding an external air-to-oil cooler and lines (factory or aftermarket). Please note the Oil cooler adapter cannot be used without an oil cooler.
Show More Show Less
Bosch - Corporate Logo
T#:14686
Part#: 11787589475
In Stock
$ 223.99

This product was last offered at the strikethrough price on
04-30-2026

$ 172.99 USD
Free Shipping on orders $49 and up
$ 172.99 USD
Free Shipping on orders $49 and up

The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. Bosch's Oxygen sensors are high quality and will give you the the longest and best performance for the price.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
E82,E90,E92,E93,F30,F34

Fits BMW Engines including:
N55 - up to 08/2013

Show More Show Less

Precision Raceworks - Corporate Logo
T#:38195386
Part#: 201-0129
Ships in 7 Business Days
$ 69.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks N54 N55 Manifold Location Replacement Spark Plug Wires are the same wires that come with Precision Raceworks' BMW N54 and N55 High Performance Ignition Kits, featuring low-resistance, high-performance spark plug wires. These wires are 100% custom-designed from the ground up to meet or exceed OEM requirements and feature seals that are both dust and water resistant. These spark plug wires work with Precision Raceworks' BMW N54 and N55 High Performance Ignition Kits 601-0108 or 601-0150.
Show More Show Less

Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 950cc - ...
NOT A DIRECT REPLACEMENT FOR FACTORY INJECTORS - For use with aftermarket port injectio...
Bosch - Corporate Logo
T#:47679242
Part#: 501-0082
In Stock
Sale - Save 7% $ 572.99

This product was last offered at the strikethrough price on
08-25-2026

$ 530.02 USD
Free Shipping on orders $49 and up
Sale - Save 7%
$ 572.99

This product was last offered at the strikethrough price on
08-25-2026

$ 530.02 USD
Free Shipping on orders $49 and up
The Black Market Parts Genuine Bosch Motorsports EV14 fuel injectors featuring USCAR (EV6) connector matched and packaged in a pack of 6 units. Direct plug-in for Motiv Reflex, AIC, and Nexsys Motorsports
Show More Show Less
DeatschWerks Performance Fuel Injector Set - 50lb/hr(550cc)
For Custom Applications - Will require additional tuning or modifications. NOT DIRECT DROP IN!
DeatschWerks - Corporate Logo
T#:6151339
Part#: 16U-00-0050-6
In Stock
$ 403.99

This product was last offered at the strikethrough price on
06-03-2026

$ 399.00 USD
Free Shipping
$ 399.00 USD
Free Shipping
DeatschWerks was founded in 2004 in Oklahoma and has dedicated themselves to providing high quality EFI applications to a wide variety of manufacturers. DW has developed a wide variety of innovative fuel system components including fuel pumps, modular surge tanks, conversion fuel rails, dual-stage fuel filters, and ethanol compatible fuel pressure regulators. All DeatschWerks high flow fuel injectors are built using only quality OEM cores. In addition, each set is balanced to within a 2% flow variation. This means better fitment, easier tuning, and increased reliability. Full set of 6 50lb/hr 550cc injectors. All relevant tuning data available on DeatschWerks website.
Show More Show Less
Bosch - Corporate Logo
T#:372884
Part#: 15733
In Stock
$ 74.99 USD
Free Shipping
$ 74.99 USD
Free Shipping
Bosch Universal Oxygen Sensors are perfect for replacing faulty sensors throwing off a check engine lights and causing poor operation and low gas mileage. If you are looking for a cheaper option or are unable to get a hold of the sensor you need, you can reuse part of the original wiring harness to connect this high quality replacement.
Show More Show Less


Precision Raceworks - Corporate Logo
T#:38094305
Part#: 601-0260
Back Ordered
$ 64.99 USD
Free Shipping on orders $49 and up
For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38161702
Part#: 101-0256
Ships in 9 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up

Replacement Fuel Filter Element - 10 Micron | Precision Raceworks offers excellent filtration for BMW and high-performance fuel systems, ensuring that larger particles and contaminants are filtered out to maintain optimal engine function. This 10-micron replacement filter element is designed to work seamlessly with Precision Raceworks inline fuel filters, delivering superior protection to your fuel system components, including injectors and fuel pumps.

Whether you're racing on the track or using your vehicle for daily driving, this replacement fuel filter element keeps your fuel system performing at its best by providing reliable filtration and smooth fuel delivery.

  • 10-micron filtration – Effectively captures larger particles and contaminants to protect fuel system components
  • Maintains fuel flow – Supports smooth fuel delivery for consistent engine performance
  • Durable construction – Crafted with high-quality materials for long-lasting use under various conditions
  • Seamless integration – Direct replacement for Precision Raceworks inline fuel filters
  • Versatile use – Perfect for daily driving, street, and high-performance applications
  • Easy to replace – Simple maintenance to keep your fuel system clean and efficient

Fuel Filter Replacement Guidelines:

  • Racing applications: Inspect at least twice per season and replace as necessary
  • Daily driving: Inspect annually or every 6,000 miles, and replace as needed

Ensure your BMW’s fuel system stays in top shape with the Replacement Fuel Filter Element - 10 Micron | Precision Raceworks, designed to deliver consistent fuel flow and protect your high-performance engine.

Show More Show Less