BMW Engine Parts for BMW 6 Series F06 (2013+)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

BMW N55 NGK Performance Iridium Spark Plug Set
We Price Match - Give Us A Call or Chat!
NGK - Corporate Logo
T#:568296
Part#: 97506KT
In Stock
$ 113.99 USD
Free Shipping
$ 113.99 USD
Free Shipping
NOTE: For the N54, these plugs are 2 Steps Colder, while for the N55 they are only 1 Step Colder. When it comes time to change your spark plugs, you may wonder about colder stepped spark plugs as many others have. Colder spark plugs work by pulling more heat out of the engine's cylinders (making them "colder") and dissipating it into the engine's head, which is then cooled by the cooling system. Depending on how you have your engine built, these could be a great addition! Colder plugs can help prevent engine knock and prevent the tip of the spark plug from melting or misfiring. There are two rules that most people tend to go by when deciding on which spark plugs to buy: The first rule of thumb is that with every 100 horsepower added, you should run spark plugs that are a step colder than your stock plugs. This is generally accepted across the motorsports community but unfortunately isn't always the most accurate measurement of when you will need colder plugs. The second rule is to go a step colder any time you massively alter cylinder temperatures by adding forced induction to an NA engine, by increasing compression ratio, after altering timing in a major way, or by changing fuel types to something with a higher octane rating such as racing fuel. Adding spark plugs that are a step colder outside of these conditions, with no real change to the engine, can actually hurt more than help by leading to spark plugs fouling quicker than normal and by making the car harder to start in cold weather conditions. We suggest talking to your engine builder or tuner before making the change, or you can call our Turner Motorsport sales staff to discuss what modifications have been made to your vehicle and see if these plugs are right for you!
Show More Show Less
Valvetronic Actuator Replacement Kit - BMW N55 S55 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:599759
Part#: 11377603979KT2
In Stock
Sale - Save 10% $ 268.99

This product was last offered at the strikethrough price on
05-03-2026

$ 241.95 USD
Free Shipping
Sale - Save 10%
$ 268.99

This product was last offered at the strikethrough price on
05-03-2026

$ 241.95 USD
Free Shipping
Includes actuator, actuator gasket and valve cover gaskets
NGK - Corporate Logo
T#:587466
Part#: 97506S8KT
In Stock
$ 151.99 USD
Free Shipping
$ 151.99 USD
Free Shipping
When it comes time to change your spark plugs, you may wonder about colder stepped spark plugs as many others have. Colder spark plugs work by pulling more heat out of the engine's cylinders (making them "colder") and dissipating it into the engine's head, which is then cooled by the cooling system. Depending on how you have your engine built, these could be a great addition! Colder plugs can help prevent engine knock and prevent the tip of the spark plug from melting or misfiring. There are two rules that most people tend to go by when deciding on which spark plugs to buy: The first rule of thumb is that with every 100 horsepower added, you should run spark plugs that are a step colder than your stock plugs. This is generally accepted across the motorsports community but unfortunately isn't always the most accurate measurement of when you will need colder plugs. The second rule is to go a step colder any time you massively alter cylinder temperatures by adding forced induction to an NA engine, by increasing compression ratio, after altering timing in a major way, or by changing fuel types to something with a higher octane rating such as racing fuel. Adding spark plugs that are a step colder outside of these conditions, with no real change to the engine, can actually hurt more than help by leading to spark plugs fouling quicker than normal and by making the car harder to start in cold weather conditions. We suggest talking to your engine builder or tuner before making the change, or you can call our Turner Motorsport sales staff to discuss what modifications have been made to your vehicle and see if these plugs are right for you!
Show More Show Less

Precision Raceworks - Corporate Logo
T#:3786918
Part#: 201-0002
In Stock
$ 69.99 USD
Free Shipping
$ 69.99 USD
Free Shipping
The Precision Raceworks N54 N55 Manifold Location Replacement Spark Plug Wires are the same wires that come with Precision Raceworks' BMW N54 and N55 High Performance Ignition Kits, featuring low-resistance, high-performance spark plug wires. These wires are 100% custom-designed from the ground up to meet or exceed OEM requirements and feature seals that are both dust and water resistant. These spark plug wires work with Precision Raceworks' BMW N54 and N55 High Performance Ignition Kits 601-0021 or 601-0149.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:1271579
Part#: 601-0021
Back Ordered
$ 479.99 USD
Free Shipping
$ 479.99 USD
Free Shipping
Rid your BMW's N54 or N55 engine of misfires, sluggish throttle response, rough idle, and power loss with Precision Raceworks' High-Performance Ignition Kit!
Valve Cover Kit - N55
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:5376284
Part#: 11127570292TKT
In Stock
Sale - Save 5% $ 320.99

This product was last offered at the strikethrough price on
05-03-2026

$ 304.52 USD
Free Shipping
Sale - Save 5%
$ 320.99

This product was last offered at the strikethrough price on
05-03-2026

$ 304.52 USD
Free Shipping
If your valve cover has become cracked or warped, replace it with this Hamburg Tech cover from Turner Motorsport to prevent leaks and further valvetrain damage. Replace your leaking valve cover to keep your oil inside the engine, where it belongs. Includes everything needed to install a new valve cover: Valve cover Gasket flange Crank case vent hose Hardware
Show More Show Less

OEM Ignition Service Kit - N63 S63 4.4L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:556726
Part#: N63TISKT
In Stock
$ 333.99 USD
Free Shipping
$ 333.99 USD
Free Shipping

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less
Delphi - Factory Spec Ignition Service Kit - N55
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:5498500
Part#: 12137594937IGKT
In Stock
Sale - Save 21% $ 336.99

This product was last offered at the strikethrough price on
07-27-2026

$ 265.22 USD
Free Shipping
Sale - Save 21%
$ 336.99

This product was last offered at the strikethrough price on
07-27-2026

$ 265.22 USD
Free Shipping
If your BMW's mileage is getting up there, be sure to keep your ignition system in check. Whether you currently have a misfire or you're just doing preventative maintenance, this kit is perfect. The kit includes: 6 Delphi Coils with locks 6 Bosch spark plugs BMW spark plug service label for your records 1 packet of American Grease Stick dielectric grease The kit includes: 6 Bremi Coils with locks 6 Bosch spark plugs BMW spark plug service label for your records 1 packet of American Grease Stick dielectric grease
Show More Show Less

High-Pressure Fuel Pump Replacement Kit - N55
Vehicles with production date from 12/2013 do not require an additional adapter
10X Entries Into Our F80 M3 Sweepstakes
First time replacement will require T#199513 Adapter for vehicles with production date up to 12/2013
Packaged by Turner - Corporate Logo
T#:3165724
Part#: 13518604231KT2
In Stock
$ 388.99 USD
Free Shipping
$ 388.99 USD
Free Shipping
This kit includes new HPFP gaskets needed for a complete and easy install. The fuel pump is the heart of your car, pumping fuel to the engine and making your car run. If your fuel pump is broken, replace it with this original BMW part. If your fuel filter is clogged, you must replace the entire fuel pump assembly.
Show More Show Less

OMP - Corporate Logo
T#:1614
Part#: EA-462
Back Ordered
$ 65.00 USD
Free Shipping
$ 65.00 USD
Free Shipping
OMP Battery Cut Off Switch / Kill Switch, for use in racecars as an emergency "kill switch", to depower the electrical system in the event of a crash or other emergency. This cut off switch is FIA approved, has 6 poles and alternator protection, as well as a removable key.
Show More Show Less
IRP - Individual Racing Parts - Corporate Logo
T#:5309585
Part#: IRPCBC-55
In Stock
$ 124.99 USD
Free Shipping
$ 124.99 USD
Free Shipping
Prevent your crank bolt from spinning with IRP's N55/S55 engine bolt fixture. As the spinning of the crank bolt has been a known issue for both the N55 and S55 motors, this is a must have to ensure that your engine stays in working condition! Features: Composed of lightweight billet aluminum Includes crank bolt capture and 8 fasteners
Show More Show Less
Bosch - Factory Spec Ignition Service Kit - N55
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:556734
Part#: N55TISKT
In Stock
$ 276.99 USD
Free Shipping
$ 276.99 USD
Free Shipping

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less


High Pressure Fuel Pump Replacement Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:5389771
Part#: N55HPFKKT
In Stock
$ 1,783.99

This product was last offered at the strikethrough price on
07-06-2026

$ 1,743.99 USD
Free Shipping
$ 1,743.99 USD
Free Shipping
HPFP woes? Replacement high pressure exchange pump for the N55 engine. Kit includes: Remanufactured High-pressure fuel pump Intake manifold gasket sets Throttle body gasket High pressure fuel sensor No core charge required!
Show More Show Less
Packaged by Turner - Corporate Logo
T#:583533
Part#: N63PISKT
In Stock
Sale - Save 15% $ 319.99

This product was last offered at the strikethrough price on
05-03-2026

$ 272.48 USD
Free Shipping
Sale - Save 15%
$ 319.99

This product was last offered at the strikethrough price on
05-03-2026

$ 272.48 USD
Free Shipping

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
OEM Ignition Service Kit - F10/12/13 M5 M6
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:556724
Part#: F1XMTISKT
In Stock
$ 497.99 USD
Free Shipping
$ 497.99 USD
Free Shipping

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less

Ignition Projects - Corporate Logo
T#:1637696
Part#: IP-A122609
Ships in 5 Business Days
$ 1,055.00 USD
Free Shipping
$ 1,055.00 USD
Free Shipping
Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!
Show More Show Less

Turbo Install Kit - N63 S63 Engines
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:401611
Part#: N63S63INSTALLKT1
Ships on Sep 21, 2026
$ 158.88 USD
Free Shipping
$ 158.88 USD
Free Shipping

Key components to help get your install done easily and effectively. Get your car running right again!

Kit includes:​

  • All required gaskets and o-rings
  • All exhaust and downpipe gaskets
  • T-bolt clamps
  • 1gal of Coolant
Show More Show Less
Fuel-It! - Corporate Logo
T#:403363
Part#: FIEPIK4
Back Ordered
Starting at $ 1,688.99 USD
Free Shipping
Starting at $ 1,688.99 USD
Free Shipping

Are you running more E85 or making more power on pump gas than your HPFP (High-Pressure Fuel Pump) can support?

Fuel-it has developed a port injection kit for your S55 that will provide you with the additional fueling capacity that you need to be able to run up to 100% E85 on stock or upgraded turbos.

What is port injection?

Port injection is a kit that is installed between your intake manifold and the cylinder head that runs off the low-pressure supply to provide you with more fueling than your stock system is capable of.  It's a relatively easy system to install and does not require any permanent modification to your car.

Port injection kits are offered in five different packages to meet your needs:

Base port injection kit: (included in Bronze, Silver or Platinum Kits)

  • Fuel-It! custom black anodized spacer for the intake manifold
  • Fuel-It! custom black anodized fuel rail
  • Black anodized aluminum and stainless steel hardware
  • Dual fuel supply port for those that are running inlets in the stock location (email us for info)
  • Optional return port for those that will be running an upgraded fuel pressure regulator 
  • Six of the following:
    • Flow matched Bosch injectors (52#)
    • Extended length steel bolts for mounting your new spacer 
    • BMW OEM gaskets

Bronze kit includes:

  • Base port injection kit
  • Basic fuel line connection kit
    • Two custom Fuel-It! fittings to maintain your stock fuel line connections at the HPFP and the feed line as it enters the engine bay
    • -6an (3/8") upgraded fuel lines
    • High flow custom Fuel-It! "Y" adapter
    • -6an fuel rail connection

Silver kit includes:

  • Base port injection kit
  • Basic fuel line connection kit​
  • An upgraded fuel line that completely replaces the stock fuel line

Platinum kit includes:

  • Base port injection kit
  • Basic fuel line connection kit​
  • An upgraded fuel line that completely replaces the stock fuel line​
  • Integrated ethanol sensor​
  • Bluetooth and JB4 compatible ethanol analyzer
    • JB4 integration compatible 0-5volt
    • Bluetooth (iPhone or Android app must be purchased to use this feature)

*These kits are available for off-road use only

*All port injection kits are built to order.

*Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated, your ethanol readings may be artificially elevated.

Show More Show Less