BMW Engine Parts for BMW 6 Series F06 (2013+)

BMW N55 NGK Performance Iridium Spark Plug Set

We Price Match - Give Us A Call or Chat!

T#:568296

Part#: 97506KT

In Stock

$ 113.99 USD

Add to Wish List

Qty

$ 113.99 USD

Add to Wish List

NOTE: For the N54, these plugs are 2 Steps Colder, while for the N55 they are only 1 Step Colder. When it comes time to change your spark plugs, you may wonder about colder stepped spark plugs as many others have. Colder spark plugs work by pulling more heat out of the engine's cylinders (making them "colder") and dissipating it into the engine's head, which is then cooled by the cooling system. Depending on how you have your engine built, these could be a great addition! Colder plugs can help prevent engine knock and prevent the tip of the spark plug from melting or misfiring. There are two rules that most people tend to go by when deciding on which spark plugs to buy: The first rule of thumb is that with every 100 horsepower added, you should run spark plugs that are a step colder than your stock plugs. This is generally accepted across the motorsports community but unfortunately isn't always the most accurate measurement of when you will need colder plugs. The second rule is to go a step colder any time you massively alter cylinder temperatures by adding forced induction to an NA engine, by increasing compression ratio, after altering timing in a major way, or by changing fuel types to something with a higher octane rating such as racing fuel. Adding spark plugs that are a step colder outside of these conditions, with no real change to the engine, can actually hurt more than help by leading to spark plugs fouling quicker than normal and by making the car harder to start in cold weather conditions. We suggest talking to your engine builder or tuner before making the change, or you can call our Turner Motorsport sales staff to discuss what modifications have been made to your vehicle and see if these plugs are right for you!

Show More Show Less

BMW N63/S63 4.4L NGK Performance One-Step Colder Spark Plug Set - ...

We Price Match - Give Us A Call or Chat!

T#:587466

Part#: 97506S8KT

In Stock

$ 151.99 USD

Add to Wish List

Qty

$ 151.99 USD

Add to Wish List

When it comes time to change your spark plugs, you may wonder about colder stepped spark plugs as many others have. Colder spark plugs work by pulling more heat out of the engine's cylinders (making them "colder") and dissipating it into the engine's head, which is then cooled by the cooling system. Depending on how you have your engine built, these could be a great addition! Colder plugs can help prevent engine knock and prevent the tip of the spark plug from melting or misfiring. There are two rules that most people tend to go by when deciding on which spark plugs to buy: The first rule of thumb is that with every 100 horsepower added, you should run spark plugs that are a step colder than your stock plugs. This is generally accepted across the motorsports community but unfortunately isn't always the most accurate measurement of when you will need colder plugs. The second rule is to go a step colder any time you massively alter cylinder temperatures by adding forced induction to an NA engine, by increasing compression ratio, after altering timing in a major way, or by changing fuel types to something with a higher octane rating such as racing fuel. Adding spark plugs that are a step colder outside of these conditions, with no real change to the engine, can actually hurt more than help by leading to spark plugs fouling quicker than normal and by making the car harder to start in cold weather conditions. We suggest talking to your engine builder or tuner before making the change, or you can call our Turner Motorsport sales staff to discuss what modifications have been made to your vehicle and see if these plugs are right for you!

Show More Show Less

Bav Auto Spark Plug Socket 12" x 5/8"

10X Entries Into Our F80 M3 Sweepstakes

T#:580385

Part#: B8800072

In Stock

Sale - Save 25% $ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.49 USD

Add to Wish List

Magnetic insert holds the spark plug securely in place for easy installation. Works great on many twin can engines where the spark plugs are recessed deep in the cylinder head.

Billet Oil Filter Cap

T#:21045489

Part#: BMS-OFC

In Stock

Starting at $ 89.00 USD

Add to Wish List

Starting at $ 89.00 USD

Add to Wish List

The Burger Motorsports V2 billet aluminum oil filter cover is a metal upgrade that directly replaces your weak OE plastic cap for greater protection, better cooling, ease of removal/install, and looks great under the hood. The built-in 21mm hex and a 3/8" drive socket wrench fitting that does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter cage. Anodized for protection. This quality part is a must for any serious BMW owner. Replaces OEM part number 11427525334 - BMW Oil filter cover. Features and Benefits Solid aluminum design is much stronger than brittle plastic 21mm hex head + 3/8" drive socket wrench fitting Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter cage and o-ring Anodized for protection Looks great under the hood Made in the USA

Show More Show Less

OEM INA Accessory Belt Tensioner Assembly - N55 S55

We Price Match - Give Us A Call or Chat!

T#:394063

Part#: 11288604266

In Stock

$ 79.99

This product was last offered at the strikethrough price on
06-08-2026

$ 60.99 USD

Add to Wish List

Qty

$ 60.99 USD

Add to Wish List

Pulleys begin to squeak once they are reaching the end of their life span and the tensioners can fail, no longer applying enough tension to the accessory belt. If not replaced, tese can seize up and lead to a long host of problems that would leave you stranded on the side of the road. Prevent this with routine maintenance and replace your belts and pulleys every 50,000 miles to ensure continued reliability.

Fits the following BMW chassis:
F22/23 F87 F3X F07/10/11 F06/12/13 F01/02 F25/26 E70/71 F15/16

Fits the following BMW engines:
N55 3.0L, S65 3.0L

Show More Show Less

Port Injector Plugs

T#:27171925

Part#: UNI-BMS-PIPLUGS

In Stock

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.

Show More Show Less

N55 Valve Cover OEM Elring

2X Entries Into Our F80 M3 Sweepstakes

T#:2438603

Part#: 11127570292

In Stock

$ 463.99

This product was last offered at the strikethrough price on
04-12-2026

$ 289.99 USD

Add to Wish List

Qty

$ 289.99 USD

Add to Wish List

Complete assembly with gaskets & hardware

OEM INA Deflection Pulley - N55 3.0L, S55 3.0L

We Price Match - Give Us A Call or Chat!

T#:554453

Part#: 11288673720

In Stock

$ 45.99 USD

Add to Wish List

Qty

$ 45.99 USD

Add to Wish List

Pulleys begin to squeak once they are reaching the end of their life span and if not replaced, can seize up and lead to a long host of problems that would leave you stranded on the side of the road.

Spark Plug Gapper Tool BMS Billet

T#:26404907

Part#: 12MMSPG

In Stock

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

Fuel Pump Cam Follower - BMW/MINI B46 B48 B58

We Price Match - Give Us A Call or Chat!

T#:39768327

Part#: 06H109311B

In Stock

$ 29.99

This product was last offered at the strikethrough price on
09-02-2026

$ 28.95 USD

Add to Wish List

Qty

$ 28.95 USD

Add to Wish List

Bav Auto Crankshaft Front Oil Seal Removal / Installer Tool - N54, N5...

10X Entries Into Our F80 M3 Sweepstakes

T#:580444

Part#: B8800139

Ships in 7 Business Days

Sale - Save 5% $ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.79 USD

Add to Wish List

Qty

Sale - Save 5%

$ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.79 USD

Add to Wish List

Used in removal and installation of the front crankshaft seal on BMW N55 engines, a common job that you can save yourself a ton of money doing at home.

Bav Auto Fuel Injector Removal/Installation Tool - N55

For E - Chassis N55

10X Entries Into Our F80 M3 Sweepstakes

T#:580388

Part#: B8800075

Ships on Feb 19, 2027

Sale - Save 20% $ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD

Add to Wish List

This tool takes the stress and difficulty out of removing and installing your N55 fuel injectors.

Elring Oil Pan Gasket - E70 E71 F15 F16 F86 F01 F02 F10 F12 F13 F85 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:596428

Part#: 11137566644

In Stock

$ 23.79 USD

Add to Wish List

Qty

$ 23.79 USD

Add to Wish List

Bav Auto Timing Tool Kit - N51 N52 N54 N55 S55

10X Entries Into Our F80 M3 Sweepstakes

T#:580414

Part#: B8800107

Ships on Oct 21, 2026

Sale - Save 5% $ 371.99

This product was last offered at the strikethrough price on
05-03-2026

$ 353.39 USD

Add to Wish List

Qty

Sale - Save 5%

$ 371.99

This product was last offered at the strikethrough price on
05-03-2026

$ 353.39 USD

Add to Wish List

Sets cam, valve & VANOS timing on BMW N51, N52, N53, N54 & N55 engines. Includes camshaft fixture with hold-down bolts, 3 alignment gauges and TDC pin. A must when removing and replacing cylinder heads on these engines.

Show More Show Less

Elring Crankshaft Seal - Front

For vehicles with a production date up to 02/2011

2X Entries Into Our F80 M3 Sweepstakes

T#:362853

Part#: 11117547842

In Stock

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

65x79x10 - Usually replaced when servicing the timing chains

OEM INA Idler Pulley -- N55

We Price Match - Give Us A Call or Chat!

T#:402395

Part#: 11287615130

In Stock

$ 35.34

This product was last offered at the strikethrough price on
05-06-2026

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
E70,E71,F06,F07,F10,F12,F13,F15,F16,F01,F02,

Fits BMW Engines including:
N55

Show More Show Less

OEM Elring Valve Cover Gasket Set - Cylinders 1-4 - BMW N63/S63 4.4L ...

2X Entries Into Our F80 M3 Sweepstakes

T#:2691316

Part#: 11127614700

In Stock

$ 48.99

This product was last offered at the strikethrough price on
09-03-2026

$ 36.49 USD

Add to Wish List

Qty

$ 36.49 USD

Add to Wish List

Everywhere there is a seam on your engine, there is the potential for an oil leak. This is prevented through the use of gaskets and seals. One such gasket that prevents oil leaks is the valve cover gasket. This gasket is used to seal the gap between the valve cover and the cylinder head, however, since this gasket is made of rubber it has a tendency to become brittle, crack, and start to leak due to its constant exposure to heat and engine oil.

Show More Show Less

OEM Elring Valve Cover Gasket Set - Cylinders 5-8 - BMW N63/S63 4.4L ...

2X Entries Into Our F80 M3 Sweepstakes

T#:2691317

Part#: 11127614701

Ships in 1-2 days

$ 48.99

This product was last offered at the strikethrough price on
04-06-2026

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Everywhere there is a seam on your engine, there is the potential for an oil leak. This is prevented through the use of gaskets and seals. One such gasket that prevents oil leaks is the valve cover gasket. This gasket is used to seal the gap between the valve cover and the cylinder head, however, since this gasket is made of rubber it has a tendency to become brittle, crack, and start to leak due to its constant exposure to heat and engine oil.

Show More Show Less

Bav Auto Fuel Injector Installer / Remover - N20/N55

10X Entries Into Our F80 M3 Sweepstakes

T#:580389

Part#: B8800076

Ships on Oct 21, 2026

Sale - Save 10% $ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 96.29 USD

Add to Wish List

Qty

Sale - Save 10%

$ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 96.29 USD

Add to Wish List

This enables you to easily remove and install fuel injectors on BMW N20 and N55's produced from 2/2011 and up with direct injection.

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel ...

T#:21933055

Part#: N54PIIMINJECT

Back Ordered

$ 988.00 USD

Add to Wish List

Qty

$ 988.00 USD

Add to Wish List

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel Line Kit - Phoenix Racing is a high-performance upgrade engineered to replace the stock plastic intake manifold on BMW N54 engines. Constructed from durable, lightweight aluminum, this manifold increases airflow and strength, delivering reliable performance for both street and track applications. Integrated with top-mount port injection bungs, this manifold ensures optimal fuel delivery and spray patterns for maximum efficiency. The Phoenix Racing kit includes calibrated 750cc injectors and a plug-and-play fuel line, making it ideal for drivers aiming for high horsepower and seamless installation. Available through Turner Motorsport.

Replaces the factory plastic manifold with high-strength aluminum for increased durability and performance
Supports increased airflow to enhance engine power and efficiency
Integrated top-mount port injection bungs optimize fuel injector spray and delivery
Includes calibrated 750cc injectors and plug-and-play fuel line for a complete port injection solution
Multiple expansion vacuum ports support blow-off valves, boost gauges, Hobb’s switches, and more
High-quality, high-temperature o-rings provide lasting durability and reliability
Exclusively available through Turner Motorsport, ensuring trusted quality and service

Show More Show Less

Bav Auto Media Blaster Kit - BMW N20 N54 N55

10X Entries Into Our F80 M3 Sweepstakes

T#:582473

Part#: B1100008

In Stock

Sale - Save 8% $ 329.99

This product was last offered at the strikethrough price on
05-03-2026

$ 303.26 USD

Add to Wish List

Qty

Sale - Save 8%

$ 329.99

This product was last offered at the strikethrough price on
05-03-2026

$ 303.26 USD

Add to Wish List

Carbon building up in your intake ports? Take care of it quick and easy with this DIY media blaster kit from Bav auto. This walnut shell media blaster kit contains everything you need to effectively clean and de-carbon the intake ports and valves on your turbocharged N20, N54, or N55 BMW engine. Taking your vehicle to the dealer to have this service performed, you would be looking at a cost of around $1000 or more! This kit saves you money and can be used as many times as you need to ensure perfectly clean intake ports for optimum airflow and performance. Included in this kit: 20lb pressure feed media blaster including water separator and pressure gauge blasting wand N54/N55 port adapter (attaches to your shop vac to catch the used media and deposits) 25lb package of walnut shell blasting media Use of this kit requires a medium sized air compressor (suggested minimum 20-30 gallon tank, 4.0 CFM @ 90psi), common "shop vac" and full hearing and eye protection. We recommend the use of a remote starter switch. Please note: Intake manifold gasket set and Throttle body gasket, sold separately, must be replaced when removing intake manifold.

Show More Show Less

Bav Auto Fuel Injector Seal Installer & Remover - N54/N63

10X Entries Into Our F80 M3 Sweepstakes

T#:580445

Part#: B8800140

In Stock

Sale - Save 3% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD

Add to Wish List

Qty

Sale - Save 3%

$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD

Add to Wish List

This is has been specifically designed to remove and install the seals on your fuel injectors without damaging either the seals or injectors themselves.

Bav Auto Crankshaft Rear Oil Seal Removal / Installer Tool - N51, N52...

10X Entries Into Our F80 M3 Sweepstakes

T#:580412

Part#: B8800104

In Stock

Sale - Save 5% $ 147.99

This product was last offered at the strikethrough price on
05-03-2026

$ 140.59 USD

Add to Wish List

Qty

Sale - Save 5%

$ 147.99

This product was last offered at the strikethrough price on
05-03-2026

$ 140.59 USD

Add to Wish List

For removal and installation of the rear crankshaft seal on BMW N51, N52 and N54 engines.

OEM Elring Rear Crankshaft Cover With Seal - BMW N63 S63 4.4L ...

2X Entries Into Our F80 M3 Sweepstakes

T#:2602228

Part#: 11148483798

In Stock

$ 80.99

This product was last offered at the strikethrough price on
04-21-2026

$ 57.99 USD

Add to Wish List

Qty

$ 57.99 USD

Add to Wish List

The rear main oil seal or crankshaft seals is one of the most difficult to replace. However, they often fail, and when they do, your car will be marking it's territory with little oil drops wherever you park. Apart from making a mess, it can also cause oil to come in contact with the clutch surface. Replace yours and keep your oil in your engine.

Show More Show Less

Elring Timing Cover Output Shaft Seal

2X Entries Into Our F80 M3 Sweepstakes

T#:591588

Part#: 11147647380

In Stock

$ 33.99

This product was last offered at the strikethrough price on
04-08-2026

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Seals the timing case on the front of the engine.

OEM Elring Valve Cover Gasket Set - N63 4.4L - BMW E70/71 F01/02 F06/...

2X Entries Into Our F80 M3 Sweepstakes

T#:2513314

Part#: 11127566288-9

In Stock

$ 114.99

This product was last offered at the strikethrough price on
04-21-2026

$ 83.47 USD

Add to Wish List

Qty

$ 83.47 USD

Add to Wish List

If there is a large amount of oil on the sides of the engine or if you can smell burning oil, chances are it's a bad valve cover gasket. The gasket fails and allows oil to seep down onto the side of the engine and other parts causing a mess and reducing the amount of oil in your engine. This replacement gasket from Elring is perfect to prevent any further oil leaks. Includes the following: Valve Cover Gaskets - Left & Right Valvetronic Seals Elring is one of the biggest OEM names in the manufacturing of high-quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Show More Show Less

Borescope Camera with Light For Phone

10X Entries Into Our F80 M3 Sweepstakes

T#:32450134

Part#: PHONEBORESCOPE

In Stock

Sale - Save 3% $ 58.99

This product was last offered at the strikethrough price on
05-03-2026

$ 57.22 USD

Add to Wish List

Qty

Sale - Save 3%

$ 58.99

This product was last offered at the strikethrough price on
05-03-2026

$ 57.22 USD

Add to Wish List

The Borescope Inspection Camera offers 1920P HD resolution, a flexible 7.9mm probe, and a 16.4ft semi-rigid cable, making it ideal for inspecting hard-to-reach areas. Easily connect to IOS and Android devices, and use the IP67 waterproof probe for various applications, including automotive, plumbing, and home inspections.

Key Features:

1920P HD Resolution: Capture clear images and high-quality video at 1920x1440 resolution.
Easy Connection: Connect quickly to IOS 9.0+ and Android 7+ devices via the 'SUP-ANESOK' app.
Semi-Rigid Cable: 16.4ft cable offers a mix of flexibility and rigidity for precise inspections.
Waterproof Probe: IP67-rated, capable of operating underwater up to 3.28 feet for 1 hour.
Wide Applications: Suitable for automotive, plumbing, and home inspections, with adjustable brightness for low-light environments.

Includes:

Borescope Camera
Android Adapter
Lightning Port Adapter
USB Type-C Connector
16.4 ft. Semi-Rigid Cable
Magnet
Hook
Mirror
Protective Cap
Manual

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

Bav Auto Intermediate Lever Valve Spring Compressor - N20/26 N55 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:580431

Part#: B8800124

Ships in 7 Business Days

Sale - Save 15% $ 178.99

This product was last offered at the strikethrough price on
05-03-2026

$ 152.14 USD

Add to Wish List

Qty

Sale - Save 15%

$ 178.99

This product was last offered at the strikethrough price on
05-03-2026

$ 152.14 USD

Add to Wish List

For installation and removal of pressure springs on intermediate levers of valve train. Ensures quick, easy and safe handling of these high force springs.

TurboSmart OPR V2 Oil Pressure Regulator

T#:28504207

Part#: TS-0811-0012

In Stock

10% off MSRP $ 189.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 170.99 USD

Add to Wish List

Qty

10% off MSRP

$ 189.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 170.99 USD

Add to Wish List

Introducing Turbosmart’s OPR V2 Turbocharger Oil Pressure Regulator, a cutting-edge solution launched in 2022 that ensures steady oil pressure for your turbocharger. This innovative regulator features a return-less design with an integrated 44 Micron Stainless Steel Mesh Oil Filter, providing robust performance and protection.

The OPR V2 is the first of its kind, utilizing Turbosmart’s proprietary flow control method to maintain optimal oil pressure regardless of engine oil variables like pressure or temperature. It guarantees a smooth oil flow to your turbocharger, safeguarding critical components such as Exhaust Drive, Back & Charge Pressures from excessive oil pressure that could lead to oil consumption and smoke.

Gone are the days of guesswork with restrictors and complex plumbing for oil pressure regulation. The OPR V2 simplifies the process with its return-less, inline installation and the convenience of a built-in 44 Micron Oil Filter. This filter, made of serviceable and replaceable Stainless Steel Mesh, adds an extra layer of defense against engine oil debris that could harm your turbocharger.

Key Features:

Innovative Patent Pending Design Durable Aluminium (6262 T6) Anodised Body & Valve Regulated Oil Pressure Compatible with Most turbochargers Integrated Stainless Steel (304) Mesh Oil Filter -4AN Inlet and Outlet for easy installation 1/8 NPT Sensor/Gauge Port for monitoring Directional Inlet Feed Logic for optimized performance Laminar Flow Output for consistent oil delivery Compatible with all Engine Oils Designed and Manufactured in Australia

Show More Show Less

Bav Auto Oil Filter Housing Cap Removal Tool - 1/2" Drive

10X Entries Into Our F80 M3 Sweepstakes

T#:580338

Part#: B8800006

In Stock

Sale - Save 25% $ 33.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 33.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.49 USD

Add to Wish List

Used to easily remove your oil filter housing cap without damaging it.

Bav Auto Torx head bolt socket - E12

10X Entries Into Our F80 M3 Sweepstakes

T#:580351

Part#: B8800022

Ships in 7 Business Days

Sale - Save 25% $ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD

Add to Wish List

This special long, thin, Torx socket is required for removal and installation of the head bolts on most BMWs with twin-cam cylinder heads. 1/2" drive

Improved Racing BMW Oil Cooler Thermostat (180F)

T#:27171935

Part#: IRTHERM

Back Ordered

Starting at $ 318.99 USD

Add to Wish List

Starting at $ 318.99 USD

Add to Wish List

Precise Oil Temperature Control for Your BMW Upgrade your BMW N20, N26, N51, N52, N53, N54, N55, and S55 engine's oil temperature control with Improved Racing's high-performance oil cooler adapter. Designed to address flaws in the factory's restrictive oil cooler adapter and faulty internal flow control valve, this upgrade ensures precise oil temperature control. Improved Racing's thermostat provides quick engine warmup, prevents overcooling, and delivers full oil cooling capacity on demand. Trusted by professional race teams around the globe, Improved Racing's thermostats have proven highly reliable, are backed by a lifetime warranty, and are made in the USA. Option to Use the Factory Oil Cooler and Lines The optional factory oil line adapter allows you to use the factory oil cooler lines for a simple, plug-and-play installation. For maximum performance, the factory oil cooler and lines may be replaced with an aftermarket cooler and AN lines using the AN adapter fittings (-10AN line size is recommended). Please note that some applications, such as most BMW SUV's, use a water-to-oil heat exchangers. These applications require plugging the coolant supply and return ports, as well as adding an external air-to-oil cooler and lines (factory or aftermarket). Please note the Oil cooler adapter cannot be used without an oil cooler.

Show More Show Less

Walnut Shell Blast Media (18/40 Fine Grade) - 50 lbs

10X Entries Into Our F80 M3 Sweepstakes

T#:582690

Part#: B1100050

In Stock

Sale - Save 15% $ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 78.19 USD

Add to Wish List

Qty

Sale - Save 15%

$ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 78.19 USD

Add to Wish List

Used for carbon buildup removal during walnut shell blasting

Elring Cylinder Head Gasket - E70, E71, F01, F02, F06, F07, F10, F12,...

2X Entries Into Our F80 M3 Sweepstakes

T#:596412

Part#: 11127567765

In Stock

$ 137.10

This product was last offered at the strikethrough price on
08-26-2026

$ 112.99 USD

Add to Wish List

Qty

$ 112.99 USD

Add to Wish List

Just a head gasket, not a set

Elring Valve Seal Repair Kit

2X Entries Into Our F80 M3 Sweepstakes

T#:591665

Part#: 11340054492

In Stock

$ 53.99

This product was last offered at the strikethrough price on
08-14-2026

$ 45.99 USD

Add to Wish List

Qty

$ 45.99 USD

Add to Wish List

Billet Spark Plug Gapper Tool - 14mm - BMS

T#:583132

Part#: BMSBSPGT14MM

Ships in 7 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

Precisely gaps spark plugs for enhanced engine performance and efficiency
Speeds up the gapping process while ensuring accuracy and uniformity
Available in two sizes (14mm and 12mm) for a wider range of compatibility
Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
Made in the USA for premium quality and durability

Show More Show Less

Elring Crankcase Gasket Kit - BMW N55 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:44767322

Part#: 648.530

In Stock

$ 163.99 USD

Add to Wish List

Qty

$ 163.99 USD

Add to Wish List

Crankcase gaskets and seals can fail just like any other seal on your BMW, leading to oil and coolant loss. If your engine is leaking fluids from multiple sources, this crankcase gasket kit from Elring is just what you need to get your BMW leak-free and back on the road!

Show More Show Less

OEM INA Engine Timing Chain - N47, N20

T#:42301983

Part#: ZC0219

In Stock

$ 80.99

This product was last offered at the strikethrough price on
06-29-2026

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

Ensure your BMW runs like new with the precision and durability of this OEM INA timing chain - engineered for performance, built for reliability.

Bav Auto Ratcheting Serpentine Belt Wrench Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:580390

Part#: B8800077

In Stock

Sale - Save 10% $ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 61.19 USD

Add to Wish List

Qty

Sale - Save 10%

$ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 61.19 USD

Add to Wish List

Used to retract your serpentine belt tensioner. This kit includes 18mm, 5/8 in, 14mm, 13mm, 12mm, sockets and 3/8 in and 1/4 in drive adapters

Blue WG38 Gen V Ultra-Gate 38 - 14PSI

T#:22591972

Part#: TS-0551-1011

In Stock at Vendor

10% off MSRP $ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

Qty

10% off MSRP

$ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

The Gen V WG38 Ultra-Gate 38 external wastegate is your cost-effective, high-performance solution. This 38mm external wastegate is meticulously designed for hassle-free bolt-on applications that make use of the 2-bolt flange.

Show More Show Less

Blue Thermostat Caps (pair)

T#:54139632

Part#: BMS-TCP-BLU

Ships in 1 Business Day

$ 29.00 USD

Add to Wish List

Qty

$ 29.00 USD

Add to Wish List

Burger Motorsports Turbo Double Baffle Oil Catch Can - F23 235i Conve...

T#:5567062

Part#: OCCN55-235VERT

Ships on Oct 6, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

It's no secret that BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Large 16mm+ inlet and outlet exceeds OEM PCV sizing Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)

Show More Show Less

BMW N54 N55 Oil Cooler Valve - Red Burger Motorsport Sport (4/2007+) ...

T#:588633

Part#: OILVALVE-RED

In Stock

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

This simple engine oil cooler valve from Burger Motorsports increases flow to your fender mounted engine oil/air heat exchanger resulting in lower engine oil temperatures and more consistent performance during heavy throttle. Less restrictive than the spring-loaded units. Installs in minutes and is fully reversible. CNC machined for a precise fit and anodized for protection. Made in the USA. Requires BMW's external sport engine oil cooler which is standard on most 2008+ models, optional on 2007 E9x models. FEATURES AND BENEFITS Easily lower engine oil temperature Stock oil cooler will work more efficient More consistent performance CNC Machined for a perfect fit Made in USA

Show More Show Less

Billet Oil Thermostat Lid

T#:21045480

Part#: BMS-TLID

In Stock

Starting at $ 39.00 USD

Add to Wish List

Starting at $ 39.00 USD

Add to Wish List

These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.

Show More Show Less

OEM Elring Upper Oil Pan Gasket - F06,F10,F12,F13 S63 4.4L

2X Entries Into Our F80 M3 Sweepstakes

T#:2706163

Part#: 11137843145

Ships in 2 Business Days

$ 38.99

This product was last offered at the strikethrough price on
08-26-2026

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

This is a direct replacement oil pan gasket for your vehicle. Oil leaks can cause a low oil level, which comes with some obvious dangers. Inexpensive to replace, yet a very vital component. Make sure your oil is staying inside your engine.

Show More Show Less

BMW Valve Cover Gasket

2X Entries Into Our F80 M3 Sweepstakes

T#:15412491

Part#: 11128636546

Ships in 1 Business Day

$ 54.99

This product was last offered at the strikethrough price on
04-26-2026

$ 43.99 USD

Add to Wish List

Qty

$ 43.99 USD

Add to Wish List

Keeping the oil inside your engine is extremely important to performance. Between oil change intervals, your oil can dip to dangerous levels if there is a leak you may not be aware of. The valve cover is an extremely common place for this to happen. Years of exposure to extreme temperature change degrades the gaskets and causes failure. Replace yours to keep your engine oil in your vehicle.

Show More Show Less

NGK - Ignition Coil - N20 N52 N54 N55 S55 S54 N62 S62 M54

We Price Match - Give Us A Call or Chat!

T#:35289800

Part#: 12138616153

In Stock

$ 59.99

This product was last offered at the strikethrough price on
05-07-2026

$ 58.99 USD

Add to Wish List

Qty

$ 58.99 USD

Add to Wish List

Elring Oil Pan Gasket - F10 F12 F13

2X Entries Into Our F80 M3 Sweepstakes

T#:596435

Part#: 11137843149

Ships in 2 Business Days

$ 43.21

This product was last offered at the strikethrough price on
08-26-2026

$ 38.96 USD

Add to Wish List

Qty

$ 38.96 USD

Add to Wish List

TurboSmart WG38 Gen V Ultra-Gate 38 - 14PSI - Black

T#:4921469

Part#: TS-0551-1012

Ships on Oct 6, 2026

10% off MSRP $ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

Qty

10% off MSRP

$ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

The Turbosmart GenV range is the Highest Flowing Wastegate range in the World. The GenV WG38 UltraGate38 External Wastegate is a Motorsport proven, cost-effective external wastegate. The GenV provides extensive user configuration, world-leading extended thermal performance, fatigue resistance, and best-in-class flow performance for optimum control and longevity. The GenV External Wastegate from Turbosmart was a ground-up rework of a classic and the only feature that rolled over from the Gen4 range was the mounting orientation. CFD optimized and validated in-house for maximum flow and thermal management, the GenV range has more features, options and performance than any other gate like it. A direct fit upgrade to all Gen4 Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap, and base for easy, 360-degree optional routing of reference hoses, optional liquid-cooling provision, 1/8″ NPT reference ports and are provided with the full range of available springs.

Show More Show Less

Elring Cylinder Head Bolt Set - F01 F02 F10 F12 F13 E70 F15 F16 F85 F...

For vehicles with a production date from 10/2011

2X Entries Into Our F80 M3 Sweepstakes

T#:596417

Part#: 11127607557

Ships on Oct 7, 2026

$ 83.87

This product was last offered at the strikethrough price on
08-26-2026

$ 75.85 USD

Add to Wish List

Qty

$ 75.85 USD

Add to Wish List

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 6 Series F06 (2013+)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results