BMW Intake Parts for BMW 6 Series F06 (2013+)

Upgraded replacement for your crankcase vent hose P#11127584128 featuring upgraded silicone, stainless steel clamps, and new OE connectors and seals.

Enhance your BMW N55 engine with our Silicone Crank Case Vent Hose, a premium replacement for the fragile, failure-prone factory hose. Over time, the stock plastic hose deteriorates due to constant exposure to heat and oil, leading to cracks and leaks. Our solution? A high-quality silicone hose engineered for superior durability and long-term reliability.

To further enhance performance, we’ve lined the hose with fluorosilicone, providing exceptional resistance to oil and chemical degradation. Designed in-house using advanced CAD modeling and 3D scanning, this hose offers a precise OEM fit while eliminating the common weaknesses of plastic construction.

Each kit includes stainless steel hose clamps for a secure, hassle-free installation. Whether you’re replacing a worn-out CCV hose or upgrading for added peace of mind, this premium solution ensures your BMW N55 runs smoothly and efficiently for years to come.

Features:

Arrives preassembled with new OE fittings and seals
Direct OEM Fit – Retains factory hose dimensions while eliminating reliability issues.
High-Performance Silicone – Resists heat-related wear for long-lasting durability.
4-Ply Fluorosilicone Lining – Superior protection against oil and chemical exposure.
Stainless Steel Clamps Included – Secure installation and extended service life.
Give your BMW N55 the reliability it deserves—upgrade to the ECS Tuning Silicone CCV Hose today!

Upgrade your BMW's air intake system with the Turner Motorsport Exact-Fit High-Flow Dry Air Filter, replacing the factory filter for improved engine performance. This reusable filter ensures proper air intake flow, enhancing power across the band and boosting fuel efficiency. With higher flow than stock paper filters, it's a direct OEM replacement, providing an instant increase in performance.

Key Benefits:

• Direct replacement for OEM filters.
• Higher flow than OEM for improved performance.
• Dry air filter—no oiling required.
• Reusable, saving money on frequent replacements.
• Cleaning needed only every 50,000 miles under normal driving conditions.

Choose the Turner Motorsport Exact-Fit High-Flow Dry Air Filter for a cost-effective performance upgrade without compromising on maintenance.

Improve your BMW's engine performance with the ECS Exact-Fit High Flow Oiled Air Filter designed for S63 and S55 engines. By replacing your factory air filter with this high-flow oiled filter, you'll experience enhanced airflow, resulting in better engine breathing, increased power throughout the power band, and improved fuel economy. Unlike stock paper filters, this reusable filter offers higher flow, ensuring an immediate performance boost. Choose between oiled and dry filters, each offering unique benefits. While oiled filters provide better airflow, they require regular maintenance, including oiling after cleaning. On the other hand, dry filters offer easier maintenance without the need for oiling. Both options outperform OE paper filters and are reusable, saving you money in the long run. Key features include direct OEM fitment, higher flow than OEM filters, and reusable design, making it an ideal performance upgrade for your BMW.

Key Features:

• Direct replacement for the OEM filter
• Higher flow than OEM
• Oiled air filter
• Reusable
• Only needs cleaning every 50,000 miles under normal highway driving conditions

Be sure to check out the full line of filter cleaning supplies ECS Tuning has to offer!

* For vehicles with MAF sensors, it is important to ensure the oil has adequate time to dry before use and is not over oiled. If the oil gets up on the MAF sensor it can cause damage resulting in a check engine light.

The diverter valve is responsible for redirecting boost away from the intake when it's not needed. Other cars use a blow-off valve to vent the pressurized air into the atmosphere (the whoosh sound commonly heard on turbo engines) but BMW and other makers use a diverter valve to keep the air circulating through the intake for emissions purposes. A failing diverter valve will lead to a boost leak as turbocharged air leaks past the seals instead of going into the engine when you want it. This is a minor issue on stock engines but a bigger issue on tuned or heavily modded engines (those will use an aluminum diverter valve instead of the stock plastic). The factory diverter valve is plastic which is prone to cracking and electric which will fail without warning. This is a direct replacement diverter valve for cars with the N55 and S63 (X5M/X6M) engines.

N55 takes 1 diverter valve.
S63 takes 2 diverter valves (1 per turbo).

This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E70 X5 X5,E71 X6,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36
S63 engine applies to X5M/X6M only. Fxx M5/M6 uses S63TU engine and does not use a diverter valve at all.

Eventuri was founded by true enthusiasts who had a shared passion for cars and performance, engineers that had a background in Aeronautics as well as automotive tuning. After experiencing disappointment time and time again from the claims set forth by the automotive aftermarket, they set out to raise the bar. Their goal? Set a new benchmark for intake design providing true gains, not just "claims."

Designed to use the "venturi effect," Eventuri has created a unique intake system that out-performs the competition. The Venturi effect is when the smooth reduction in cross-sectional area along the length of the housing causes the airflow to increase in velocity. This means more air-flow and smoother delivery, resulting in more power. But that isn't all that sets their design apart. They also use an inverted cone filter that is decoupled from the MAF. This is done because it means the filter no longer dictates the shape of air-flow, thus creating the venturi effect. 

Their systems are extensively developed using cutting edge design, testing and prototyping methods. With a focus on performance, each design undergoes CFD analysis and is then validated at the prototype stage through volumetric airflow, intake temperature and extensive dyno testing. They strive to publish all the development information to illustrate the depths they go in bringing an intake from concept to reality. Also assuring to only use the highest quality components for style and durability

Fits the following BMWs
2012-2016 F12 F13 BMW M6