Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
Upgrade your BMW race car with a stud conversion kit from [Brand Name] for enhanced strength, safety, and improved pit stop times. Even for non-race cars, stud conversions streamline wheel installation and removal, eliminating the need to align holes before threading lug bolts.
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 17x9.0" |
| Offset (mm): | 30 |
| Weight (lbs): | 16.55 |
| Profile: | Concave |
This product was last offered at the strikethrough price on
03-17-2026
This product was last offered at the strikethrough price on
03-09-2026
This sensor monitors the position of the Valvetronic eccentric shaft and feeds data back to the ECU. The common issue with this sensor is that it gets contaminated with oil and fails. It doesn't give a fault code or check engine light, however. What you would notice is sluggish driving, hesitation, poor performance, jerky shifts from an automatic, and other drivability issues. These types of issues are typically diagnosed as ignition coils (which are their own issue altogether) but this sensor may also be faulty.
The eccentric shaft sensor is located at the front of the cylinder head and is only accessible with the valve cover off. It's easy to check for oil by removing the engine trim cover (the outer cover with the BMW roundel), unplug the sensor, and look inside. If oil is present inside, or even on the valve cover itself, the sensor is likely contaminated or ready to fail. You can wipe or clean the oil from sitting inside the sensor but it will come back.
If you're planning this job make sure you have our Valve Cover Overhaul Kit, which includes a new seal for the eccentric sensor as well as the rest of the valve cover and Valvetronic gaskets. You can add the valve cover set from the options below.
OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.
As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
This item fits the following BMWs:
2008+ E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
2010+ F07 BMW 535i GT, 535i xDrive GT, 550i GT, 550i xDrive GT
2011 F10 BMW 528i
2006-2010 E83 BMW X3 3.0i X3 3.0si
2011 F25 BMW X3 xDrive28i
2007-2010 E70 BMW X5 3.0si X5 xDrive30i
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i
| Wheel Specs | |
| Fitment: | Rear |
| Size: | 18x9.5" |
| Offset (mm): | 35 |
| Weight (lbs): | 18.85 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 17x9.0" |
| Offset (mm): | 30 |
| Weight (lbs): | 16.55 |
| Profile: | Concave |
Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees!
Key Features:
| Wheel Specs | |
| Fitment: | Rear |
| Size: | 18x10.0" |
| Offset (mm): | 25 |
| Weight (lbs): | 19.95 |
| Profile: | Concave |
This product was last offered at the strikethrough price on
05-15-2026
This product was last offered at the strikethrough price on
05-15-2026
| Wheel Specs | |
| Fitment: | Rear |
| Size: | 18x9.5" |
| Offset (mm): | 35 |
| Weight (lbs): | 18.85 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Rear |
| Size: | 18x10.0" |
| Offset (mm): | 25 |
| Weight (lbs): | 19.95 |
| Profile: | Concave |
52mm Prosport Electrical Oil Pressure Gauge - Clear Lens/White LED provides precise monitoring of engine oil pressure, ensuring that drivers can detect issues before they become catastrophic. This high-quality gauge is crucial for tracking engine performance and preventing potential damage.
This product was last offered at the strikethrough price on
05-07-2026
Silver 18x9.5" ET22 Concave APEX ARC-8 Wheel.
Wheel Specs
Fitment:Rear
Size:18x9.5"
Offset (mm):22
Weight (lbs):19.2
Profile:Concave
APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.
All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit many BMW models and may fit other models with a specific wheel spacer. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.
Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!
Price is per wheel.
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.
Kit Includes:
| Wheel Specs | |
| Fitment: | Rear |
| Size: | 18x9.5" |
| Offset (mm): | 22 |
| Weight (lbs): | 19.2 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Rear |
| Size: | 18x9.5" |
| Offset (mm): | 22 |
| Weight (lbs): | 19.2 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Mostly Rear |
| Size: | 19x9.5" |
| Offset (mm): | 22 |
| Weight (lbs): | 22.9 |
| Profile: | 3, deep dish |
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 19x10" |
| Offset (mm): | 25 |
| Weight (lbs): | 21.95 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 19x9.5" |
| Offset (mm): | 22 |
| Weight (lbs): | 20.95 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 19x10.5" |
| Offset (mm): | 27 |
| Weight (lbs): | 22.95 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 19x9.5" |
| Offset (mm): | 22 |
| Weight (lbs): | 20.95 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 19x10" |
| Offset (mm): | 25 |
| Weight (lbs): | 23.5 |
| Profile: | 3, deep dish |
| Wheel Specs | |
| Fitment: | Rear |
| Size: | 18x10.0" |
| Offset (mm): | 25 |
| Weight (lbs): | 19.95 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 17x9.0" |
| Offset (mm): | 30 |
| Weight (lbs): | 16.55 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Rear |
| Size: | 18x9.5" |
| Offset (mm): | 22 |
| Weight (lbs): | 19.2 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Rear |
| Size: | 18x9.5" |
| Offset (mm): | 35 |
| Weight (lbs): | 18.85 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 19x10" |
| Offset (mm): | 25 |
| Weight (lbs): | 21.95 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 19x10.5" |
| Offset (mm): | 22 |
| Weight (lbs): | 22.95 |
| Profile: | Concave |
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 19x10.5" |
| Offset (mm): | 22 |
| Weight (lbs): | 23.9 |
| Profile: | 3, deep dish |
The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.
Kit Includes:
Sporty 3-spoke OMP Racing GP steering wheel in 330mm diameter. Anodized aluminum center with OMP horn button and black leather-like polyurethane rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The grip itself is textured at the 9 and 3 positions for extra control of the steering wheel. The 330mm size is on the small size compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.
Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.
This is an OMP performance RS-PT2 Fiberglass racing seat. The seat internal frame is fiberglass and the entire seat upholstery is velour material. Fiberglass gives strength and light weight and the velour adds to the comfort of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights.
*Made to order, extended wait and shipping times may occur.
Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.