BMW Suspension Parts for BMW 5 Series F10 (2011-2016)

Control arms are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Genuine BMW Left Tension Strut With Rubber Mounting -
This item fits the following BMW Chassis:
F06,F10,F12,F13

Sway bar bushings tend to split over time, failing to properly secure and reinforce the sway bar. If yours has begun to split or if your vehicle is more than 5 years old, it is a good idea to replace them to ensure proper sway bar operation.

Genuine BMW Stabilizer Rubber Mounting -
This item fits the following BMW Chassis:
E63,F01,F02,F06,F10,F12,F13
 

Koni suspension has taken their long running FSD (Frequency Selective Dampening) Technology and improved upon it to create their new Special Active suspension package. Improving handling while also improving the comfort of your BMW's ride, Special Active shocks and struts prove they are a top contender in the replacement suspension market.

Koni's Special Active dampers adapt to the continuous imperfect road conditions in order to provide you with a more responsive and smoother ride. Thanks to multiple generations of suspension expertise, these shocks and struts rival expensive ride control systems of newer vehicles but at a cost that is significantly lower and a capability to be retrofitted into existing vehicles.

Designed by Koni for the vehicle's original stock ride height, these are not intended to be used with lowering springs and will perform best when paired with stock springs.

Koni Special Active Features:

• KONI’s latest generation of Frequency Selective Damping Technology
•  Improves safety and road holding
•  Technology proven on over 1.5 million factory equipped vehicles
•  Secure and stable feeling for spirited driving
•  Unrivaled aftermarket solution can be fitted to most new and older cars
•  Driving refinement for cars, trucks, SUVs, etc.
•  Technology that rivals expensive Original Equipment electronic systems
•  Performance for driver and comfort for passengers in one

Activate your Koni Rebate!

Fits the following BMWs:
2009-2017 F10 BMW RWD without EDC suspension

Control arms are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
F06,F10,F12,F13

Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the F chassis M5/M6 to reduce bodyroll, improve steering and turn-in response, and reduce understeer. The front and rear bars are hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics. These are the same sway bars used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension.

Dinan M5/M6 Sway Bar Specs:
F: 28mm, hollow, 2-position adjustable, adjustable links, urethane bushings, and brackets included
R: 22mm, hollow, 3-position adjustable, urethane bushings, and brackets included

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. These bars are worth 2 points towards your Dinan badge.

This item fits the following BMWs:
2012+ F10 BMW M5
2012+ F06 BMW M6 Gran Coupe
2012+ F12 F13 BMW M6