This braided stainless steel line replaces the stock hydraulic hose connecting your clutch slave cylinder to the clutch master cylinder. There are several deficiences with rubber, especially as it ages - when new the rubber expands and swells under pressure and the pedal can feel spongy. As rubber ages and is exposed to extreme temperatures the rubber can harden and even shrink (common on brake hoses), which results in a stiff pedal. Rubber clutch lines do not stand up to the stresses of hard use. ECS Exact-Fit stainless reinforced clutch lines provide more confident and dependable shifting by maintaining consistent line pressure, long lasting corrosion resistance, and increased protection from failure. These lines are reinforced with braided stainless steel mesh, affording superior expansion resistance. This resistance to expansion creates a firmer pedal, and a more direct clutch pedal feel. The signature red polymer coating provides additional protection from the elements and abrasion.

This particular stainless steel clutch line fits the following BMWs:
2004-2010 E60/E61 5 Series 
2004-2010 E63/E64 6 Series (manual transmission only, no SMG)
2011-20116 F07/F10 5 Series 
2011-2016 F06/F12/F13 6 Series

This bushing is designed for use at the rear side of the shifter arm, providing support for the rear section connected to the body.

Key Features:

Ensures a perfect fit Instantly replaces worn or damaged OE shift lever bushings, restoring smooth manual transmission shifting Constructed from high-strength materials for long-lasting durability Manufactured to factory specifications for easy installation and optimal shifting performance Resistant to heat and ozone for extended reliability

This is an OEM LuK stock twin mass flywheel for the N52 non-turbo engine in the 128i, 325i/328i/330i, 525i/528i/530i, and Z4 30i. It's manufactured by OEM supplier LuK. Sachs recommends a new dual mass flywheel (DMF) on every other clutch replacement. There are several indicators for replacing the flywheel: damage to the clutch contact plate (from a severely worn clutch disc), grease leaking from inside (overheating), build-up of clutch material on the contact plate (excessive slipping and overheating), and failure of the internal damping system.

The dampening system uses rubber or coil springs to absorb driveline vibrations. Through age, excessive heat, and aggressive use the rubber loses its resilience and the metal springs lose their strength and become brittle. If the clutch and flywheel have become overheated the internal grease may break down as well. A DMF failure can be massive and catastrophic, not to mention dangerous as bits of metal and rubber fling themselves through the transmission bellhousing. Heat and aggressive driving will accelerate the wear so race and track cars should have their stock flywheels replaced at regular intervals or with any new clutch. Even normal street cars should plan for a new flywheel if it has high mileage.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

DMF wear can only be checked with the transmission and clutch removed. If you can rotate the outer flywheel more than 20mm in either direction then it should be replaced.

A new pilot bearing (roller bearing) is included, pre-installed in the flywheel hub.

URO Transmission Oil Cooler - F10 528i N20 2.0L

The URO Transmission Oil Cooler - F10 528i N20 2.0L is a premium cooling solution designed to safeguard your BMW’s transmission system from overheating and potential damage. Overheated automatic transmission fluid can degrade, causing poor shifting and harm to internal components. This corrosion-resistant, high-strength cooler delivers reliable, leak-free ATF cooling performance, ensuring your transmission operates at peak efficiency. Manufactured to OE dimensions, it provides proper clearances and easy bolt-on installation for a perfect fit. With stringent quality control at every stage of production and a 24-month unlimited mileage warranty, this transmission oil cooler is a trusted choice for BMW F10 528i N20 2.0L owners.

Key Benefits:

• Prevents overheating and breakdown of automatic transmission fluid
• Corrosion-resistant, high-strength materials for leak-free performance
• Manufactured to OE dimensions for proper clearances and easy installation
• Rigorous quality control ensures top-tier reliability
• 24-month unlimited mileage warranty for peace of mind

Upgrade your BMW F10 528i N20 2.0L with the URO Transmission Oil Cooler and enjoy smooth, dependable transmission performance for years to come.