Brisk Silver Racing 2MOR10S Spark Plug - N20 N54 N55 S55 S63 ...

T#:588791

Part#: 2MOR10S

In Stock

11% off MSRP $ 17.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD

Add to Wish List

Qty

11% off MSRP

$ 17.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD

Add to Wish List

Brisk Silver Racing Spark Plugs are the best solution for high performance and racing engines. Silver Spark Plugs provide many unique and beneficial characteristics, Silver is taking spark plug technology to a whole new level, here are many reasons why our Brisk Silver Racing Spark Plugs are beneficial for your engines performance. Silver is the best conductor of any metal! It conducts 560% more electricity & 481% more heat than Platinum, and 276% more electricity & 177% more heat than Iridium. Silver spark plug electrodes transfer electricity & heat better than any other spark plug material resulting in the most powerful spark! This is beneficial for a full complete combustion of the available fuel and air in the combustion chamber, combustion efficiency creates horsepower gains. Key Benefits and Applications of Brisk Silver Racing Spark Plugs: Silver is the best Electric and Heat Conductor - the best material for performance and racing spark plugs Superior Ignition Ability Increases Engine Power Lower Required Supplied Ignition Voltage Good Resistance to Fouling and Easier Starts Race Engines and Engines with Hard to Ignite Fuels Supercharged / Turbocharged / Nitrous engines Excellent for Total Loss Ignition Systems Excellent Spark Plug Choice for any Vehicle, Stock or Modified, even for High Mileage Vehicles and Vehicles With Oil Consumption Problems Spark Plug Specs: 12mm thread 1.05"(26.1mm) reach 14mm Bi-Hex gasket seat non-projection tip resistor silver center el. cut-back ground electrode *Replacement for NGK SILZKBR9F8S (BMW# 12120042724) *One heat range colder than NGK 97506 SILZKBR8D8S

Show More Show Less

Bav Auto Stretch Belt Installer Tool

10X Entries Into Our F80 M3 Sweepstakes

T#:580430

Part#: B8800123

In Stock

Sale - Save 10% $ 16.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.29 USD

Add to Wish List

Qty

Sale - Save 10%

$ 16.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.29 USD

Add to Wish List

Bav Auto's stretch belt installer tool is helpful in installing some BMW accessory belts.

EV Charging Extension Cord - 50-foot NEMA 14-50

T#:22987103

Part#: CHRG-EXT-50

In Stock

$ 359.99 USD

Add to Wish List

Qty

$ 359.99 USD

Add to Wish List

EVANNEX offers a versatile 50-foot charging cable extension compatible with NEMA 14-50 connectors, seamlessly integrating with home or mobile chargers. This extension cord augments your existing charger's reach by up to 70 feet, enabling access to distant power sources from your BMW or MINI vehicle.

Key benefits of EVANNEX's charging cable extension:

Extends charging range up to 70 feet from your vehicle.
Ergo Grip Handle facilitates easier unplugging of heavy power cords.
Built-in LED indicator for convenient power activation testing.
Enables charging from distant power sources like clothes dryer or AC outlets.

For enhanced charging accessibility during road trips, pair EVANNEX's extension with road trip charging adapters, allowing connection to popular RV hookups, dryer connections, air conditioner plugs, and more.

Show More Show Less

3 Pin Connector

10X Entries Into Our F80 M3 Sweepstakes

T#:33412931

Part#: 12527519996

In Stock

Sale - Save 25% $ 10.99

This product was last offered at the strikethrough price on
06-14-2026

$ 8.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 10.99

This product was last offered at the strikethrough price on
06-14-2026

$ 8.24 USD

Add to Wish List

Includes connector housing with terminals and seals. Commonly used for the pencil-style ignition coil connector.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

*OEM cross reference PN# 12527519996 - Commonly used for the pencil-style ignition coil connector.

Please reference the original part number from the existing connector to confirm fitment, before ordering.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943

Show More Show Less

LK-2M 2 Pin Connector Package

10X Entries Into Our F80 M3 Sweepstakes

T#:40072446

Part#: LK2M

In Stock

Sale - Save 29% $ 6.99

This product was last offered at the strikethrough price on
06-14-2026

$ 4.94 USD

Add to Wish List

Qty

Sale - Save 29%

$ 6.99

This product was last offered at the strikethrough price on
06-14-2026

$ 4.94 USD

Add to Wish List

Includes connector housing with terminals and seals. Commonly used for the engine oil pressure switch.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943

Show More Show Less

Precision Raceworks N54 N55 High Performance Ignition Kit - Aftermark...

T#:35256049

Part#: 601-0150

Ships in 9 Business Days

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

Precision Raceworks' ignition kit is designed to fit any vehicle with an N54 or N55 engine and offers the highest output of any kit on the market! Featuring 100% Plug-&-Play connections, low resistance 50ohm/ft proprietary plug wires, and design technology from Marine and Aerospace applications, these coils are guaranteed to output consistent high voltage and current for optimal ignition system performance and reliability. Every component in this kit meets or exceeds OEM quality and features premium seals for dust and water resistance.

Show More Show Less

WPC Treated Cam Bearing Ledge - Exhaust - BMW N52 2.0L N54 N55 3.0L ...

10X Entries Into Our F80 M3 Sweepstakes

T#:585946

Part#: 11127531224WPC

In Stock

$ 916.99

This product was last offered at the strikethrough price on
09-07-2026

$ 814.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 916.99

This product was last offered at the strikethrough price on
09-07-2026

$ 814.99 USD

Limited Qty Sale

Add to Wish List

A common issue on N54 motors is cam bearing ledge scoring due to lack of lubrication, and if left unattended can cause damage to the camshaft and increase oil consumption. These WPC-treated cam bearing ledges help prevent lubrication issues to ensure no scoring occurs on the bearing ledge or camshaft. What is WPC, you ask? WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both.

Show More Show Less

aFe Pro GUARD D2 Oil Filter - N54/55 BMW Engine

T#:394579

Part#: 44-LF029

In Stock

$ 16.00 USD

Add to Wish List

Qty

$ 16.00 USD

Add to Wish List

Made from a synthetic media that allows maximum filtration with minimal flow restriction to satisfy modern oil-hungry engines such as the N54 and N55.

Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.

Show More Show Less

ReFlex+ Install Kit

T#:29267513

Part#: 400.1001

In Stock

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

1/2"/12mm Band Hose Clamp - 25-40mm

10X Entries Into Our F80 M3 Sweepstakes

T#:340681

Part#: 003402ECS06A-09

In Stock

Sale - Save 25% $ 2.99

This product was last offered at the strikethrough price on
06-13-2026

$ 2.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 2.99

This product was last offered at the strikethrough price on
06-13-2026

$ 2.24 USD

Add to Wish List

Ensure secure hose connections with the 1/2"/12mm Band Hose Clamp. This versatile clamp provides a tight and reliable seal for various hose sizes, making it ideal for automotive, plumbing, and industrial applications. With its durable construction and easy installation, the 1/2"/12mm Band Hose Clamp is a practical solution for preventing leaks and maintaining efficiency.

Provides a tight and reliable seal
Versatile clamp for various hose sizes
Suitable for automotive, plumbing, and industrial applications
Durable construction ensures long-lasting use

Show More Show Less

77-85mm - 3/4" Band Hose Clamp

10X Entries Into Our F80 M3 Sweepstakes

T#:377877

Part#: 003402ECS07A-05

In Stock

Sale - Save 25% $ 25.99

This product was last offered at the strikethrough price on
06-13-2026

$ 19.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 25.99

This product was last offered at the strikethrough price on
06-13-2026

$ 19.49 USD

Add to Wish List

Upgrade your BMW's hose clamps with the 77-85mm - 3/4" Band Hose Clamp from Turner Motorsport. These full 304 stainless steel clamps offer convenience and quality without the dealership price tag. German-style T-bolts allow for easy adjustment to your required diameter, ensuring a secure fit every time.

Made of durable 304 stainless steel for long-lasting performance
German-style T-bolt design for easy size adjustment
Convenient band widths for versatile applications
Quality alternative to dealership pricing

Show More Show Less

N55 Cometic Head Gasket - 0.044"

T#:31522944

Part#: C15476-044

In Stock at Vendor

$ 194.99 USD

Add to Wish List

Qty

$ 194.99 USD

Add to Wish List

Adjustable Hose Clamp - Priced Each

10X Entries Into Our F80 M3 Sweepstakes

T#:378496

Part#: 5574K12

In Stock

Sale - Save 3% $ 3.99

This product was last offered at the strikethrough price on
06-13-2026

$ 3.87 USD

Add to Wish List

Qty

Sale - Save 3%

$ 3.99

This product was last offered at the strikethrough price on
06-13-2026

$ 3.87 USD

Add to Wish List

Upgrade your hose fittings with the Adjustable Hose Clamp. Designed for versatility and reliability, this clamp provides a secure and adjustable solution for various hose sizes. With its durable construction and easy-to-use design, it ensures leak-free connections in automotive, plumbing, and industrial applications. Say goodbye to loose hoses and enjoy peace of mind with this essential hose clamp.

Provides secure and adjustable solution
Durable construction for reliability
Easy-to-use design for convenience
Suitable for automotive, plumbing, and industrial applications

Show More Show Less

1-Piece, Pinned & Unpinned Crank Hub W/ Crank Bolt Capture Plate - BM...

2X Entries Into Our F80 M3 Sweepstakes

T#:48815408

Part#: 034-113-Z015

In Stock

$ 819.00 USD

Add to Wish List

Qty

$ 819.00 USD

Add to Wish List

The factory crank hub is infamous for failure in the BMW N55 & S55 engines. Replace it with this assembly to protect your engine in the most extreme situations.

Replacement FX-170 For BMW S63

T#:36913380

Part#: SP-FX-S63-FX170

Special Order: No Guaranteed ETA

$ 1,399.99 USD

Add to Wish List

Qty

$ 1,399.99 USD

Add to Wish List

3/8"/9mm Band Hose Clamp - 20-32mm

10X Entries Into Our F80 M3 Sweepstakes

T#:341297

Part#: 003402ECS06A-05

In Stock

Sale - Save 25% $ 4.99

This product was last offered at the strikethrough price on
06-13-2026

$ 3.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 4.99

This product was last offered at the strikethrough price on
06-13-2026

$ 3.74 USD

Add to Wish List

Upgrade your Mini Cooper's hose clamping mechanism with the 3/8" (9mm) Band Hose Clamp from ECS. Designed for precision and durability, this clamp ensures a secure fit for hoses, preventing leaks and ensuring optimal performance. Crafted to meet high-quality standards, it provides reliable sealing and resilience against varying temperatures and pressures. Easy to install and engineered for long-term use, this hose clamp is an essential addition to maintain your Mini Cooper's functionality.

Precision-engineered for Mini Cooper hoses
Ensures a secure and leak-free fit
Resilient against temperature and pressure variations
Easy to install and durable for long-term use

Show More Show Less

Hose Clamp - 32mm-50mm

10X Entries Into Our F80 M3 Sweepstakes

T#:5228

Part#: 032-50T

In Stock

Sale - Save 40% $ 3.99

This product was last offered at the strikethrough price on
05-02-2026

$ 2.39 USD

Add to Wish List

Qty

Sale - Save 40%

$ 3.99

This product was last offered at the strikethrough price on
05-02-2026

$ 2.39 USD

Add to Wish List

Hose clamps for radiator hoses, coolant hoses, vacuum hoses, or intake hoses. These hose clamps are the same style as your OEM hoses with a smooth inside band to prevent cutting into the hose material.

Features:

9mm band width

6mm hex & slotted head

Smooth inside of band = optimal hose protection

OEM

430 Stainless steel band and housing with zinc plated steel screw

Asymmetric housing = even distribution of forces and prevents tilting of the clamp when tightening

Screw support = ease of assembly due to the safe guidance of the emerging band

Short housing saddle = even contact pressure = improved efficiency

Show More Show Less

1.5mm X 51mm Metric Buna-N 70 O-ring

10X Entries Into Our F80 M3 Sweepstakes

T#:388889

Part#: N1.50X051

In Stock

Sale - Save 25% $ 5.99

This product was last offered at the strikethrough price on
06-13-2026

$ 4.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 5.99

This product was last offered at the strikethrough price on
06-13-2026

$ 4.49 USD

Add to Wish List

1.5mm X 51mm Metric Buna-N 70 O-ring is the perfect sealing solution for various industrial applications. Made from high-quality Buna-N material, this O-ring provides reliable sealing performance, ensuring leak-free connections. With its metric sizing and 70 durometer hardness, it offers versatility and durability for a wide range of uses.

High-quality Buna-N material
Reliable sealing performance
Metric sizing for versatility
70 durometer hardness for durability

Show More Show Less

60-80mm 1/2"/12mm Band Hose Clamp

10X Entries Into Our F80 M3 Sweepstakes

T#:377836

Part#: 003402ECS05A-10

In Stock

Sale - Save 25% $ 6.99

This product was last offered at the strikethrough price on
06-13-2026

$ 5.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 6.99

This product was last offered at the strikethrough price on
06-13-2026

$ 5.24 USD

Add to Wish List

ECS Tuning Stainless Steel Hose Clamps for BMW

Upgrade your BMW's hose clamps with ECS Tuning Stainless Steel Hose Clamps, designed for convenience and durability. Say goodbye to long waits and overpriced dealership clamps. With various band widths available, these stainless steel clamps ensure a secure fit for your vehicle's hoses.

Benefits:

Convenient replacement for worn-out hose clamps
Made of durable stainless steel for long-lasting performance
Available in various band widths for versatile use
Affordable alternative to dealership pricing

Show More Show Less

Forged Connecting Rods - Sold Each

T#:21604327

Part#: CR-BMN55-H144.35

Special Order: No Guaranteed ETA

$ 198.99 USD

Add to Wish List

Qty

$ 198.99 USD

Add to Wish List

Supertech forged rods are a great choice for performance engine builds! These rods come with ARP 2000 hardware and are designed for high powered N55/S55 applications. H-Beam design Forged 4340 alloy Center to center: 144.35mm Be bore: 53.6mm Be width: 20.88 Pe bore: 22mm full float Pe width: 20.88mm tapered ARP 2000 - 3/8" x 1.600" bolts

Show More Show Less

Allen Head Bolt - priced each

10X Entries Into Our F80 M3 Sweepstakes

T#:372427

Part#: 91290A231

In Stock

Sale - Save 80% $ 4.99

This product was last offered at the strikethrough price on
05-02-2026

$ 0.99 USD

Add to Wish List

Qty

Sale - Save 80%

$ 4.99

This product was last offered at the strikethrough price on
05-02-2026

$ 0.99 USD

Add to Wish List

Allen Head Bolt

Upgrade your fastening needs with the Allen Head Bolt, a versatile and reliable solution for various applications. Crafted from high-quality materials, these bolts offer exceptional strength and durability. Their allen head design ensures secure tightening and easy access, making them ideal for automotive, construction, and DIY projects. Elevate your projects with the precision and reliability of Allen Head Bolts.

High-quality materials for exceptional strength
Secure tightening with allen head design
Versatile usage for automotive, construction, and DIY projects
Reliable and durable solution for various applications

Show More Show Less

Hex Bolt - N52, N54

10X Entries Into Our F80 M3 Sweepstakes

T#:19792190

Part#: 11211439395

In Stock

Sale - Save 20% $ 18.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.19 USD

Add to Wish List

Qty

Sale - Save 20%

$ 18.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.19 USD

Add to Wish List

Replacement center bolt for the engine crank pulley.

70-90mm 1/2"/12mm Band Hose Clamp

10X Entries Into Our F80 M3 Sweepstakes

T#:341279

Part#: 003402ECS05A-11

In Stock

Sale - Save 25% $ 8.99

This product was last offered at the strikethrough price on
06-13-2026

$ 6.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 8.99

This product was last offered at the strikethrough price on
06-13-2026

$ 6.74 USD

Add to Wish List

1/2"/12mm Band Hose Clamp

For reliable hose fastening, opt for the top-tier 1/2"/12mm Band Hose Clamp. Engineered for durability and versatility, this hose clamp ensures secure connections in various applications. Invest in quality and maintain optimal functionality with this essential accessory.

Versatile clamp suitable for various hose sizes
Durable construction ensures long-lasting performance
Provides a secure seal for optimal functionality
Easy to install and adjust for convenience

Show More Show Less

EV Charging Extension Cord - 30-foot NEMA 14-50

T#:22987081

Part#: CHRG-EXT

In Stock

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

The EVANNEX 30-foot charging cable extension integrates seamlessly with NEMA 14-50 connectors found in various home or mobile chargers.

Compatible with BMW or MINI electric vehicles, this extension cord extends the charging range to reach power sources up to 50 feet away.

Integration with most NEMA 14-50 chargers
Ability to connect to distant power sources
Ergo Grip Handle for secure handling
Built-in LED indicator for easy power activation confirmation
Enhanced charging accessibility for on-the-go use
Ideal for connecting to unconventional power outlets like RV hookups, dryers, or air conditioner plugs

Show More Show Less

12 Pc Metric Combination Wrench Set with 9 Piece Scraper, Hook, And P...

T#:26505018

Part#: 005989SCH01A03KT

In Stock

Sale - Save 15% $ 95.99

This product was last offered at the strikethrough price on
05-05-2026

$ 81.47 USD

Add to Wish List

Qty

Sale - Save 15%

$ 95.99

This product was last offered at the strikethrough price on
05-05-2026

$ 81.47 USD

Add to Wish List

COMBINATION WRENCH SET:

Quality combination wrenches are a must when doing any kind of automotive work.

Features:

A complete set from 8 to 19 mm
Professional quality wrenches in full length feature open end on one end and 12 pt box on the other
Satin finish provides superior feel, slip resistant grip, easy cleanup and inhibits rust
Includes sturdy wrench holder for easy storage

SCRAPER, HOOK, AND PICK SET:

Some of the most popular uses are carbon cleaning/scraping, picking out o-rings, snap rings and clips. This kit features large and small picks, hooks and a 1" wide scraper. This 9pc set should be part of everyone's tool assortment.

Features:

3" Blade MINI Awl, 90°, Hook, and Curve
6" Blade Awl, 90°, Hook, and Curve
6" x 1" wide scraper

Everything in this kit comes with LIFETIME REPLACEMENT.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

Bav Auto Stretch Belt Installer Tool

10X Entries Into Our F80 M3 Sweepstakes

T#:580415

Part#: B8800108

In Stock

Sale - Save 55% $ 19.99

This product was last offered at the strikethrough price on
05-03-2026

$ 8.99 USD

Add to Wish List

Qty

Sale - Save 55%

$ 19.99

This product was last offered at the strikethrough price on
05-03-2026

$ 8.99 USD

Add to Wish List

This universal stretch belt installer can aid in drive belt installation. Recommended in conjunction with B8800123

Fuel-It! Flex Fuel Kit - N54/N55 5 Series

T#:21242701

Part#: FFK-N5XB

In Stock

Sale - Save 4% $ 485.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 464.99 USD

Add to Wish List

Sale - Save 4%

$ 485.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 464.99 USD

Add to Wish List

This is a complete plug and play kit to install a Bluetooth ethanol sensor in your E-Series BMW. (Check compatibility for your platform below) This kit replaces the stock fuel lines from the fuel tank to the engine bay with an upgrade -6an E85 compatible fuel line and adds an ethanol sensor and Bluetooth analyzer to monitor your ethanol content. This kit features a 0-5 volt analog output that integrates with the JB4, analog gauge, or any other ECU or tuner that supports 0-5 volt input. All of these kits utilize a custom billet aluminum fittings to integrate with the stock fittings so no modifications are needed. For your fuel line upgrade, choose the option that supports your current configuration. HPFP to the fuel tank: (Stock) This upgrade replaces both stock fuel lines with one upgraded continuous fuel line from the fuel tank to the HPFP and adds the ethanol sensor. Port Injection to the fuel tank: If you are running our port injection kit, this upgrade replaces the stock fuel lines from the tank to the engine bay, integrates the ethanol sensor and then utilizes a Y adapter to supply the HPFP and PI with fuel. Our custom fittings remove those tee's and extra fittings for a cleaner high flow setup. Non-Fuel-It! port injection to fuel tank: Choose this option if you are running a port injection kit that we did not manufacture or sell. This kit includes a longer 18" feedline from the Y to the port injection rail. You then cut the feed line to the length you need and install the included -6an female fitting or -6an female elbow to make the connection to your port injection rail. *These kits are available for off-road use only *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated. *For the BMW N54 E-series JB4 platform connect the white wire to position #15 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *For the BMW N55 E-series JB4 platform connect the white wire to position #16 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.

Show More Show Less

70-90mm 3/8"/9mm Band Hose Clamp

10X Entries Into Our F80 M3 Sweepstakes

T#:363017

Part#: 003402ECS06A-11

In Stock

Sale - Save 25% $ 6.99

This product was last offered at the strikethrough price on
06-13-2026

$ 5.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 6.99

This product was last offered at the strikethrough price on
06-13-2026

$ 5.24 USD

Add to Wish List

Upgrade your BMW with ECS Tuning's Stainless Steel Hose Clamps, designed for convenience and durability. With various band widths and German-style T-bolts, these clamps offer easy adjustment to your required diameter. Say goodbye to dealer pricing and enjoy the quality you love at ECS Tuning.

Full stainless steel construction
Various band widths available
German-style T-bolts for easy adjustment
Convenient solution for hose clamp replacement

Show More Show Less

Timing Component

For vehicles with a production date up to 02/2011

10X Entries Into Our F80 M3 Sweepstakes

T#:17871151

Part#: 11117547842

In Stock

Sale - Save 20% $ 21.99

This product was last offered at the strikethrough price on
05-03-2026

$ 17.59 USD

Add to Wish List

Qty

Sale - Save 20%

$ 21.99

This product was last offered at the strikethrough price on
05-03-2026

$ 17.59 USD

Add to Wish List

60-80mm 3/8"/9mm Band Hose Clamp

10X Entries Into Our F80 M3 Sweepstakes

T#:341277

Part#: 003402ECS06A-10

In Stock

Sale - Save 25% $ 6.99

This product was last offered at the strikethrough price on
06-13-2026

$ 5.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 6.99

This product was last offered at the strikethrough price on
06-13-2026

$ 5.24 USD

Add to Wish List

Discover ECS Tuning's stainless steel hose clamps, designed to simplify your Mini's maintenance tasks. No more waiting for dealership orders or overpaying!

These clamps offer versatility with various band widths and German-style T-bolts for size adjustment, ensuring they meet your required diameter. Say goodbye to dealer pricing while securing top-notch quality synonymous with ECS Tuning.

Stainless steel construction for durability
Versatile band widths for various applications
German-style T-bolts for size adjustment
High-quality alternative to dealership hose clamps

Show More Show Less

Fuel Injector Gasket Ring - BMW N47, N57, M57, B57

10X Entries Into Our F80 M3 Sweepstakes

T#:17871160

Part#: 13532247156

Ships on Dec 2, 2026

$ 0.99 USD

Add to Wish List

Qty

$ 0.99 USD

Add to Wish List

Seals the fuel injector to the engine

Precision Raceworks 6ft 3mm Vacuum Line

T#:38195399

Part#: 501-0051

In Stock

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Precision Raceworks 6 feet of length and 3mm inner diameter

90-110mm 3/8"/9mm Band Hose Clamp

10X Entries Into Our F80 M3 Sweepstakes

T#:341281

Part#: 003402ECS06A-13

In Stock

Sale - Save 40% $ 6.99

This product was last offered at the strikethrough price on
05-02-2026

$ 4.19 USD

Add to Wish List

Qty

Sale - Save 40%

$ 6.99

This product was last offered at the strikethrough price on
05-02-2026

$ 4.19 USD

Add to Wish List

ECS Tuning 304 Stainless Steel Hose Clamps

Once again, ECS Tuning has found a way to make life easier for working on your car. Need new hose clamps but don't want to wait to order it from the dealership or pay more than you should for a hose clamp? That's where we come in! These are full 304 stainless steel hose clamps with various band widths for your convenience. They are German style using T-bolts to adjust in size to your required diameter. Never pay dealer pricing again, but still get the quality you love here at ECS Tuning.

Made from high-quality 304 stainless steel for durability
German-style design with T-bolts allows for easy size adjustment
Various band widths for versatile use
Avoid dealership pricing without compromising on quality
Perfect for BMW enthusiasts seeking affordable yet reliable hose clamps

Show More Show Less

WPC Treated Genuine BMW Bearings - Single Bearing

10X Entries Into Our F80 M3 Sweepstakes

T#:5470995

Part#: 11247617339WPC

In Stock

Sale - Save 31% $ 61.99

This product was last offered at the strikethrough price on
05-03-2026

$ 42.63 USD

Add to Wish List

Qty

Sale - Save 31%

$ 61.99

This product was last offered at the strikethrough price on
05-03-2026

$ 42.63 USD

Add to Wish List

Pure Turbos N63 (Non-TU) Pure Stage 1 Turbo Upgrade - BMW E70 E71 F01...

For vehicles with the earlier N63A engine - Not compatible with the N63TU engine

T#:46444178

Part#: N63STG1KT

Back Ordered

$ 3,426.99

This product was last offered at the strikethrough price on
07-13-2026

$ 3,300.00 USD

Add to Wish List

Qty

$ 3,300.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. When it comes to the N63, it is hard to hate a twin-turbo V8. That being said, there is always room for more power! The stock turbos are quickly maxed out and aren't quite up to the task of generating large amounts of power reliably. To solve this, Pure Turbos offers its Stage 1 turbo upgrade package for those looking to reliably increase power to 650+whp with supporting modifications.

Show More Show Less

Mosselman Stage 2 Turbo Upgrade - BMW N20 2.0L (With PWG)

For vehicles with a production date up 07/2013

T#:44359934

Part#: 010210013

In Stock

$ 2,518.00 USD

Add to Wish List

Qty

$ 2,518.00 USD

Add to Wish List

The Mosselman Upgrade Turbocharger (MSL38-50) for the N20 PWG engine increases performance levels with proven reliability. Depending on the modifications done to the car and fuel type, this turbo set can deliver up to 500hp!

Show More Show Less

ARP Ultra-Torque Fastener Assembly Lubricant (Select Your Size) ...

T#:338571

Part#: TMS1733

In Stock

Starting at $ 1.99 USD

Add to Wish List

Starting at $ 1.99 USD

Add to Wish List

If you are using a premium fastener, such as the ARP brand rod bolts, head bolts, or main bolts, then you will want this assembly lube. Made to be used to precisely duplicate all ARP fastener preload specifications.

Show More Show Less

Engine Main Bearing Kit - 0.25mm Oversized

+0.25mm

T#:26504930

Part#: MB5784SI0.25

In Stock

13% off MSRP $ 273.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 237.99 USD

Add to Wish List

Qty

13% off MSRP

$ 273.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 237.99 USD

Add to Wish List

Introducing King Main Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. Complete Set: King Main Bearings for BMW Engines come as a full set. Silicon-aluminum Bi-Metal Construction: Crafted from King's premium Silicon-aluminum bi-metal material offering exceptional strength, durability, and heat resistance. Precision Engineering: Engineered with meticulous attention to detail, our bearings are designed to exacting standards to ensure optimal fitment and compatibility with BMW engines. Enhanced Performance: Experience improved engine stability and smoother operation with King Bearings.

Show More Show Less

N55 DS25 HPFP Upgrade

T#:55533507

Part#: DE-55-25B

Ships in 4 Business Days

$ 1,699.00 USD

Add to Wish List

Qty

$ 1,699.00 USD

Add to Wish List

The Dorch Engineering DS25 N55 HPFP Upgrade is the definitive solution for enthusiast drivers looking to extract maximum power from their N55. Optimized for high output setups, this upgraded pump delivers a critical 25% bump in fueling capacity over the factory unit

Show More Show Less

Rennline OE+ Coilpack - Priced Each

T#:44495471

Part#: M138

Ships in 5 Business Days

$ 37.00 USD

Add to Wish List

Qty

$ 37.00 USD

Add to Wish List

Replace that burnt or damaged coil!

Connecting Rod Bearing Set - 0.25mm Oversized

+0.25mm

T#:26538358

Part#: CR8050SV0.25

In Stock at Vendor

14% off MSRP $ 375.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 324.99 USD

Add to Wish List

Qty

14% off MSRP

$ 375.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 324.99 USD

Add to Wish List

Introducing King Connecting Rod Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. King Rod Bearings for the N63/S63 come in a full set suitable for 8 Con-Rods. The Upper and Lower bearing shells are comprised of a lead-free, Silver-based tri-metal material designed for extreme load applications. Engineered with meticulous attention to detail, King bearings are designed to exact standards to ensure optimal fitment and compatibility with BMW engines. Experience improved smoother engine operation with King Bearings.

Show More Show Less

VTT Stage 1 Turbocharger Upgrade - N63/N63TU

2X Entries Into Our F80 M3 Sweepstakes
There turbos are built to order. Please expect 4-6 weeks for delivery.

T#:11203241

Part#: VTTSTG1N63

Ships in 10 Business Days

Starting at $ 4,607.99 USD

Add to Wish List

Starting at $ 4,607.99 USD

Add to Wish List

This new rebuilt turbocharger unit utilizes Vargas Turbo's 30+ years of experience to offer a superior quality performance rebuild. Utilizing all-new internals to stock OEM specifications, the housings are carefully machined to accept custom-machined billet compressor wheels. Not only are these a superior choice for rebuilt turbos, they offer a substantial savings over OEM. Rebuilt stock turbos to handle up to 800 WHP Housings machined to accept custom-machined billet compressor wheels All-new internals to exacting stock specifications Includes $1300 refundable core charge Starting in 1978, Vargas Turbo Technologies was built upon the dream of utilizing then-new turbocharger technology to improve the performance of everything from cars to boats. On the cutting edge since the beginning, the company has grown with the industry, servicing diesel and industrial turbochargers. Returning to their hot-rod roots, Vargas has jumped head-first into the BMW performance market, filling a need for high-quality, cost-effective turbocharger upgrades for everything from daily-driven street cars to all-out racing machines.

Show More Show Less

Turbocharger - Priced Each

For vehicles with a production date between up to 07/2014

For Cylinders 5-8

T#:2453607

Part#: 11657848114

Ships in 1 Business Day

$ 1,897.99 USD

Add to Wish List

Qty

$ 1,897.99 USD

Add to Wish List

There’s a Garrett turbo for just about every size of diesel or gasoline light vehicle engine – from 0.6-liter power units to 6.7 liters and everything in between. For heavy vehicles and off-highway equipment, Garrett’s product range meets the needs of engines with power ratings from 60hp to a mighty 4000hp. Garrett technologies and innovations have been used by nearly every major global automaker, resulting in approximately 100 million vehicles using Garrett products and an average launch rate of 100 new applications annually spanning gas, diesel, natural gas, electric and fuel cell powertrains. Signs of a failing turbo include unusual oil consumption, smoking, increased turbo lag, failure to hold boost, or the vehicle going into "limp mode". To restore the performance of your BMW, be sure to replace any failing turbocharger.

Show More Show Less

Universal Vortex Breather Catch Can

2X Entries Into Our F80 M3 Sweepstakes

T#:587831

Part#: 034-101-4000

Back Ordered

$ 153.00 USD

Add to Wish List

Qty

$ 153.00 USD

Add to Wish List

ARP Head Stud Kit - S63

T#:26238368

Part#: ARP-HSK-S63

Ships in 3 Business Days

Starting at $ 749.99 USD

Add to Wish List

Starting at $ 749.99 USD

Add to Wish List

With 5150's ARP head stud kit, you can securely tune up the boost on your BMW S63 engine without worrying about the cylinder heads lifting. Specifically designed for the turbocharged V-8 S63 engines found in high-performance models such as F10 M5, F90 M5, F12 M6, F95 X5M, F96 X6M and F13 M6. 201-4702, 201-4703. As you increase the power output of your engine beyond its factory specifications, the head and block may start to separate, causing factory bolts to stretch and fail. Our ARP Head Studs are designed to be stronger than factory bolts, ensuring your race engine stays together even under extreme conditions. Our Custom Age 625+ kit is made from a material with a tensile strength of 260 ksi, substantially higher than the 190 ksi of the ARP 2000 head stud. It's an ideal choice for individuals who want to push the limits of their S63 builds. ARP S63 Head Stud Kit for: M5 F10 2011-2016 M5 F90 2017 M6 F13 2011-2018 X5M F95 2013-2018 X6M F96 2014-2019 ARP2000 Step 1: Tighten to 30 ft-lbs. Step 2: Tighten to 60 ft-lbs. Step 3: Tighten to 90 ft-lbs. Custom Age 625+ Step 1: Tighten to 30 ft-lbs. Step 2: Tighten to 60 ft-lbs. Step 3: Tighten to 110 ft-lbs.

Show More Show Less

FrankenTurbo F800 Twin-scroll Hybrid Turbocharger - BMW F07/F10/F11 5...

For vehicles with Electronic Waste Gate

T#:51426475

Part#: F800EWG-F1X

Ships in 2 Business Days

$ 1,999.00 USD

Add to Wish List

Qty

$ 1,999.00 USD

Add to Wish List

The FrankenTurbo F800 Hybrid Turbocharger allows for more aggressive ignition timing and lower EGTs at high power levels.

N55 DS25 HPFP Upgrade

For Vehicles Produced After 12/2013

T#:55533499

Part#: DE-55-25A

Ships in 1 Business Day

$ 1,699.00 USD

Add to Wish List

Qty

$ 1,699.00 USD

Add to Wish List

The Dorch Engineering DS25 N55 HPFP Upgrade is the definitive solution for enthusiast drivers looking to extract maximum power from their N55. Optimized for high output setups, this upgraded pump delivers a critical 25% bump in fueling capacity over the factory unit

Show More Show Less

Mishimoto Ignition Coil - Single - BMW M54, N20, N52, N55, N62, N63, ...

T#:51110138

Part#: MMIG-BMW-07

Ships in 3 Business Days

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

Mishimoto’s Delphi-style ignition coils offer a premium solution for BMW owners looking to replace worn-out factory units.

Mishimoto Ignition Coil, 8-Pack - BMW N63 & S63 Engines

T#:51075067

Part#: MMIG-BMW-1108

Ships in 3 Business Days

$ 274.99 USD

Add to Wish List

Qty

$ 274.99 USD

Add to Wish List

The Mishimoto Ignition Coil (MMIC-BMW-11B) focuses on durability and electrical precision.

OEM Garret Turbocharger - Cyl 1-4 - F10 M5, F06/12/13 M6, F85 X5M, F8...

For models with a production date from 07/2014+

T#:600202

Part#: 11657850317

Ships in 1 Business Day

$ 2,159.99 USD

Add to Wish List

Qty

$ 2,159.99 USD

Add to Wish List

This is an OEM replacement right side (bank 1) turbo assembly for the S63 engine. This is a new turbo from Garrett, not a rebuilt unit. This is a complete assembly, including the manifold to the engine and the wastegate. Signs of a failing turbo are high oil consumption and blue smoke from the exhaust (not from a leak or failing CCV system) because the internal oil seals are no longer retaining oil. Without critical lubrication and cooling effects from oil, the turbo shafts and bearings are usually the first to wear and that requires a complete rebuild. You might also see increased turbo lag or failure to hold boost, which is usually a sign of a failing wastegate or some other internal issue. With any internal problems, the turbos need to be replaced. This is a new turbo - No core charge.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 5 Series F10 (2011-2016)

Sub-Categories

ECS Tuning Stainless Steel Hose Clamps for BMW

Benefits:

Allen Head Bolt

1/2"/12mm Band Hose Clamp

ECS Tuning 304 Stainless Steel Hose Clamps

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results