BMW Intake Parts for BMW 5 Series F10 (2011-2016)

The Turbosmart BOV Kompact EM Dual Port - BMW N20/N26 (VR23) offers an advanced blow-off valve solution designed specifically for BMW’s N20 and N26 engines. Engineered with premium materials, this bolt-on unit provides an ideal balance of performance and durability. By improving turbo response and boosting control, it maximizes power efficiency and prevents compressor surge, enhancing the life of your turbocharger system. Turner Motorsport offers this product as a direct replacement with easy installation and seamless compatibility for BMW enthusiasts looking to optimize performance.

• Dual Port Venting: Allows for a combination of recirculation and vent-to-atmosphere options, enhancing flexibility.
• Compact Design: Precision-engineered to fit neatly into tight engine bays while delivering maximum efficiency.
• Plug-and-Play Installation: Designed as a direct OEM replacement, making installation straightforward.
• Improved Throttle Response: Reduces lag and improves acceleration, creating a smoother driving experience.
• Quality Construction: Made from high-grade aluminum alloy for durability and performance.

Upgrade your BMW’s turbo system with the Turbosmart BOV Kompact EM Dual Port, the trusted solution for performance enthusiasts.

Improve your BMW's engine performance with the ECS Exact-Fit High Flow Oiled Air Filter designed for S63 and S55 engines. By replacing your factory air filter with this high-flow oiled filter, you'll experience enhanced airflow, resulting in better engine breathing, increased power throughout the power band, and improved fuel economy. Unlike stock paper filters, this reusable filter offers higher flow, ensuring an immediate performance boost. Choose between oiled and dry filters, each offering unique benefits. While oiled filters provide better airflow, they require regular maintenance, including oiling after cleaning. On the other hand, dry filters offer easier maintenance without the need for oiling. Both options outperform OE paper filters and are reusable, saving you money in the long run. Key features include direct OEM fitment, higher flow than OEM filters, and reusable design, making it an ideal performance upgrade for your BMW.

Key Features:

• Direct replacement for the OEM filter
• Higher flow than OEM
• Oiled air filter
• Reusable
• Only needs cleaning every 50,000 miles under normal highway driving conditions

Be sure to check out the full line of filter cleaning supplies ECS Tuning has to offer!

* For vehicles with MAF sensors, it is important to ensure the oil has adequate time to dry before use and is not over oiled. If the oil gets up on the MAF sensor it can cause damage resulting in a check engine light.

Turbosmart GenV Raceport BOV (Fits competitors 50mm / female style flange. No weld flange included)

The Race Port is renowned for its exceptional compactness and lightweight design tailored for turbocharged competition-level engines. With its innovative collar design and internal flow structures, this BOV stands out as 50% lighter and 25% smaller than competing models, yet it boasts an impressive flow rate of 330 CFM, making it the market's top-performing BOV in its category.

Fits Chargepipes With Tial/Turbosmart Flange

Upgrade your BMW or MINI with the BMW & MINI Silicone Coupler - Straight 2.38" (60.33mm). This high-quality silicone coupler is designed to provide a secure and leak-free connection for your vehicle's intake or cooling system. Engineered for durability and flexibility, it ensures optimal performance under various conditions. With its straight design and precise dimensions, this silicone coupler offers easy installation and a perfect fit for your BMW or MINI.

• Provides a secure and leak-free connection
• Engineered for durability and flexibility
• Straight design for easy installation
• Perfect fit for BMW and MINI vehicles

Unique One-Piece High Quality Housing w/ Carbon Fiber Accents:
A custom CAD designed roto-molded one-piece housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the auxiliary air scoop. Carbon Fiber Accents are provided for car show quality and to further distinguish your vehicle from others.

Hiqh Quality Tube:
This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Mounting tabs are molded in for easy installation.

Large 3-Layer "Oil-Free" Performance Air Filter:
This sealed intake system utilizes an oil-free, large 6-1/2" tall oval 360 degree radial flow performance air filter with 3-Layer progressively finer porosity synthetic media for maximum convenience. The unique air filter-to-housing interface allows for maximum filter size which increases the available air volume while simplifying the installation process.

Premium Hardware: 
Premium stainless steel hardware and clamp are used to securely mount the high flow air filter and the intake tube. This sealed intake system is designed with fewer parts for a quick and simple installation.

Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

AFE Summer Rebate Form

AFE Pro DryS Dynamic Air Intake System – Stage 2 uses three layer, washable synthetic media filtration for improved engine protection. Dry filters are MAF safe.

Kit includes two cone filters; 16 gauge powder coated heat shield; one-piece intake tube, dynamic air scoops that create ram air effect behind kidney grilles, plus a filter restore kit at no additional charge.

Dyno proven power increases of 11 horsepower and 13 lb-ft torque.

Air filter service at recommended intervals lets an engine breathe properly while protecting it from costly damage. Air filters should be inspected and replaced as needed at least once a year, more often if the vehicle is driven in heavily polluted or dusty conditions.

Features:

• +11 HP / +13 lbs. x ft. Torque max gains
• Outflows factory intake system by 31%
• CAD-Designed Roto-Molded Intake Tube
• One-Piece Sealed Housing with Auxiliary Air Scoop
• Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
• Pro 5R oiled 5-Layer Progressively Finer Mesh Cotton Gauze Oiled Media for Maximum Performance OR Pro DRY S oil-free 3-Layer Progressively Finer Porosity Synthetic Media for Maximum Convenience
• Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation

Unique One-Piece Housing:
The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A urethane plug is also included if you want to block the auxiliary air scoop. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style.

Huge 5-Layer Performance Air Filter:
The Momentum intake is designed around a pre-oiled, large 7-1/2" Tall oval top 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter-to-housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process.

Premium Hardware:
Premium clamps are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.

Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

This item fits the following BMWs:
2012+ F10 BMW 528i 528i xDrive

• Seamless plug-and-play installation
• Minimizes leakage for enhanced turbocharger performance
• Retains OE control for optimal operation
• Superior thermal performance to maximize boost without stressing the turbocharger

Looking to upgrade your stock charge air coolers to free up power and increase the cooling efficiency of your intake system? The CSF Racing Twin Charge-Air-Cooler Set may be just the thing you need! Designed and built to significantly out perform the stock coolers, these charge air coolers have a host of features that make these a clear cut winner when tested head to head.

Features and Specs:

• World’s 1st cast end tank designed high performance charge-air-cooler set for the BMW F1x m5/m6
• Custom designed CSF liquid-to-air intercooler core (CFD analysis and testing completed to ensure optimal performance)
• 28% increase in core size per each charge cooler compared to the OEM charge air coolers.
• Top/bottom, cross-flow, dual-pass core configuration with 2-stage water cooling for maximum efficiency and intake temperature reduction
• Designed with 3D scanning / rapid prototype technology to ensure precise fitment and maximum surface area utilization.
• “Drop-in fit” design for an easy & quick plug-and-play installation. Complete with OEM style “Quick-Connect” water connections and sensor ports.
• Additional E85/methane injection ports built into the cast end tank design
• Finished with a professional “Crinkle Black” powder coat finish

This item fits the following BMWs:
2011+ F10 BMW M5
2011+ F06/12/13 BMW M6