BMW 6 Series F12 (2012+)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

N-Series Ultimate Performance Ignition Coil - Red - Set Of Six ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:23714967
Part#: NSERIESIGNCOILKT
In Stock
$ 205.99 USD
Free Shipping on orders $49 and up
Upgrade your BMW's engine performance with the Dinan Performance Ignition Coil Service Kit. These high-quality ignition coils are crafted to enhance ignition power, ensuring optimal engine performance and efficiency. Engineered for durability and reliability, these coils provide improved throttle response, smoother idle, and enhanced fuel efficiency. Benefit from the Dinan Performance Ignition Coil Service Kit, designed to unleash the true potential of your BMW's engine.
Show More Show Less
Billet Oil Filter Cap
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:21045489
Part#: BMS-OFC
In Stock
Starting at $ 89.00 USD
Free Shipping on orders $49 and up
Starting at $ 89.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports V2 billet aluminum oil filter cover is a metal upgrade that directly replaces your weak OE plastic cap for greater protection, better cooling, ease of removal/install, and looks great under the hood. The built-in 21mm hex and a 3/8" drive socket wrench fitting that does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter cage. Anodized for protection. This quality part is a must for any serious BMW owner. Replaces OEM part number 11427525334 - BMW Oil filter cover. Features and Benefits Solid aluminum design is much stronger than brittle plastic 21mm hex head + 3/8" drive socket wrench fitting Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter cage and o-ring Anodized for protection Looks great under the hood Made in the USA
Show More Show Less
BMW N54 N55 S55 Mosselman Thermostat Installation Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:4799665
Part#: THERMINSTALLKT
In Stock
Sale - Save 6% $ 22.99

This product was last offered at the strikethrough price on
06-15-2026

$ 21.64 USD
Free Shipping on orders $49 and up
Sale - Save 6%
$ 22.99

This product was last offered at the strikethrough price on
06-15-2026

$ 21.64 USD
Free Shipping on orders $49 and up

BMW N54 N55 S55 Mosselman Thermostat Installation Kit is designed to ensure a seamless installation of the Mosselman thermostat on BMW engines. This comprehensive kit from Turner Motorsport includes all necessary gaskets and components, guaranteeing a reliable and precise installation for optimal engine performance.

  • Complete Kit: Includes all essential gaskets and components required for a hassle-free thermostat installation.
  • Optimal Performance: Ensures proper installation of the Mosselman thermostat, leading to improved engine cooling efficiency and performance.
  • High-Quality Components: Gaskets and parts are manufactured to meet high standards of durability and reliability.
  • Precision Fit: Engineered to match OEM specifications, providing a perfect fit and reliable performance.
  • Ease of Installation: All necessary parts are included, simplifying the installation process and reducing the need for additional purchases.

Upgrade your BMW's cooling system with the Mosselman Thermostat Installation Kit from Turner Motorsport, ensuring a top-quality, reliable setup for your engine.

Show More Show Less

Liqui Moly Special Tec LL 5W-30 Oil Change Kit / Inspection I - N20, ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:22130463
Part#: LMTECLLCHNGIN1KT
In Stock
$ 95.67 USD
Free Shipping on orders $49 and up
Ensuring your driving machine remains in optimal condition necessitates consistent maintenance. BMW's recommended oil change interval depends on your driving habits. We recommend changing your oil after a maximum of 10,000 miles. For those engaging in aggressive or city driving, a 5,000-mile oil service interval is preferable. This kit comprises: Seven Liters of Liqui Moly Special Tec LL Engine Oil 5w-30 Engine Oil Filter Oil Drain Plug Gasket (included with filter kit) Sustain the flawless performance of your BMW with this high-quality service kit from Turner Motorsport.
Show More Show Less

Ultimate Turbo Coolant Line Kit - BMW F01/02 F07/10 F06/12/13 N63 4.4...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:21702986
Part#: F0XF1XCOOLANTKT
In Stock
Sale - Save 23% $ 273.89

This product was last offered at the strikethrough price on
05-03-2026

$ 210.61 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 273.89

This product was last offered at the strikethrough price on
05-03-2026

$ 210.61 USD
Free Shipping on orders $49 and up
Elevate your F0X / F1X turbocharger performance and reliability with the Packaged by Turner Kit, meticulously designed to cater to your needs. Benefit from Enhanced Turbocharger Functionality: Improved Cooling: Our Turbocharger Coolant Supply and Return Lines are engineered to enhance coolant circulation, effectively regulating turbocharger temperatures for optimal performance. Precision Fit: Included gasket rings and hose clamps guarantee a snug and secure fit, preventing leaks and ensuring the longevity of your turbocharger system. Enhanced Reliability: By preventing coolant leaks and maintaining consistent temperatures, our kit promotes the reliability and durability of your turbocharger system, ultimately extending its lifespan. Kit Includes: Turbocharger Coolant Return Line - Cylinders 1-4 Turbocharger Coolant Supply Line - Cylinders 1-4 Turbocharger Coolant Return Line - Cylinders 5-8 Turbocharger Coolant Supply Line - Cylinders 5-8 8 Gasket Ring 3 Hose Clamp This kit fits these BMW models: F01/F02 - 750i, 750Li F06/F12/F13 - 650i F07/F10 - 550i
Show More Show Less
Performance Intake System - F10/11/07 5 Series, F12/13/06 6 Series, E...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:20979733
Part#: F10-N55-INT
In Stock
Starting at $ 219.00 USD
Free Shipping on orders $49 and up
Starting at $ 219.00 USD
Free Shipping on orders $49 and up

In BMWs with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!

Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway!

Features:

  • Adds up to 10+ Horsepower
  • Dramatic sound improvement
  • Super fast install and removal
  • Improves throttle response 
  • Retains OEM airbox base as a heat shield
  • Retains OEM cold air ducting
  • Looks great under the hood
  • Cleanable and reusable filter
  • Made in the USA
Show More Show Less

Port Injector Plugs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:27171925
Part#: UNI-BMS-PIPLUGS
In Stock
$ 60.00 USD
Free Shipping on orders $49 and up
These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.
Show More Show Less
N54/N55 Low Temp Oil Thermostat Kit - 70c
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:52621839
Part#: 008731KT1
In Stock
New Item
Sale - Save 23% $ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD
Free Shipping on orders $49 and up

Upgrade your stock oil cooler thermostat for improved performance. Swap your factory 110-degree Celsius thermostat for a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly, unlike thermostat bypass kits.

Kit contents:​

Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less

Genuine BMW Oil Change Kit / Inspection I - N52, N54, N55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:22789662
Part#: OILCHGN5XKT
In Stock
$ 108.23 USD
Free Shipping on orders $49 and up

Ensure your driving machine's peak performance with regular maintenance. Turner Motorsport offers a comprehensive service kit to keep your BMW in top shape. With varying oil change intervals based on driving habits, this kit includes:

  • Seven Liters of BMW Synthetic Engine Oil
  • Engine Oil Filter
  • Oil Drain Plug Gasket (Included with filter kit)

For optimal results, we recommend an oil change every 10,000 miles, or every 5,000 miles for aggressive or city driving. Trust Turner Motorsport to provide the quality and precision your BMW deserves.

Show More Show Less

Spark Plug Gapper Tool BMS Billet
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:26404907
Part#: 12MMSPG
In Stock
$ 35.00 USD
Free Shipping on orders $49 and up

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

  • Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
  • Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
  • High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
  • Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less
Performance Brake Fluid Flush Kit - Level 3
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:15677547
Part#: 007237SCH01A-KT
In Stock
Sale - Save 9% $ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD
Free Shipping on orders $49 and up
Sale - Save 9%
$ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD
Free Shipping on orders $49 and up
Braking systems aren't indestructible, they require proper maintenance and care to keep contaminants and moisture free from the system. A full brake fluid flush is recommended to be performed at every 2 years or 30,000 miles, whichever occurs first (Intervals may vary for vehicles used on the track, check fluid specifications for more details). A proper flush removes debris left in the system from failed seals or deposits and ensures that the system is moisture free, to help prevent future rust or clogging issues. This kit includes everything you need to perform a proper brake fluid flush and refill using a fluid that features a greater boiling point for performance based applications. Includes: Schwaben European Pressure Bleeder Schwaben Catch Bottle Set Ate TYP 200 DOT 4 Brake Fluid - 1 Liter Schwaben Brake Bleeder Wrench **A typical flush only requires 1 liter of fluid to replace all of your old brake fluid.
Show More Show Less
BMW / MINI Jack Pad Adapters - Blue - Set Of 4
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:31522930
Part#: BMWJACKPADBLUE4
In Stock
$ 65.00 USD
Free Shipping on orders $49 and up


BMW F30 E9X TMAP Sensors & PNP Adapters
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:583821
Part#: 3.5 BAR TMAP
In Stock
$ 32.99 USD
Free Shipping on orders $49 and up
JB4 3.5 bar plug and play TMAP adapters
E7X / F0X / F1X N63 4.4L Liqui Moly Top Molygen Oil Change Kit ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:22130464
Part#: LMMLYOILKT
In Stock
Sale - Save 23% $ 162.40

This product was last offered at the strikethrough price on
05-15-2026

$ 125.07 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 162.40

This product was last offered at the strikethrough price on
05-15-2026

$ 125.07 USD
Free Shipping on orders $49 and up
70c Low Temp Oil Thermostat Kit - N54/N55
For vehicles with a stock oil cooler
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:30031507
Part#: N54N55LTKT1
Back Ordered
Sale - Save 18% $ 152.97

This product was last offered at the strikethrough price on
05-03-2026

$ 125.58 USD
Free Shipping on orders $49 and up
Sale - Save 18%
$ 152.97

This product was last offered at the strikethrough price on
05-03-2026

$ 125.58 USD
Free Shipping on orders $49 and up

Upgrade your stock oil cooler thermostat for improved performance. Swap out your existing cover with ease, replacing it with a durable billet cover. Upgrade from your 110-degree Celsius thermostat to a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly unlike thermostat bypass kits.

Kit contents:

Billet thermostat housing cover
Replacement gasket
Hardware
Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less

Burger Motorsports 3.5 Bar TMAP Sensor & 32" Extension Harness - N54 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:28504212
Part#: BMS35TMAP-32
In Stock
$ 179.00 USD
Free Shipping on orders $49 and up
Use these plug-and-play adapters to quickly adapt a 3.5 BAR TMAP sensor to your N54/N55 BMW, raising the boost maximum boost range from 20psi factory up to 36psi for the 3.5 bar. For most applications the 3.5 BAR adapter is suggested which requires OEM BMW sensor part number: 13627843531.
Show More Show Less

Ultimate DCT Transmission Service Kit - F10, F12, F80, F82, F87 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:41695017
Part#: F8XDCTSKKLTKT
In Stock
$ 695.08 USD
Free Shipping on orders $49 and up
Keep your BMW’s dual-clutch transmission operating at its best with the Ultimate DCT Transmission Service Kit - F10, F12, F80, F82, F87—trusted by enthusiasts and professionals for maximum drivetrain protection and performance.
Show More Show Less
Automatic Transmission Service Kit - BMW 8HP F & G-Chassis- Liqui Mol...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:31191945
Part#: TMS8HPATSKT1
In Stock
Sale - Save 1% $ 201.99

This product was last offered at the strikethrough price on
04-14-2026

$ 200.32 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 201.99

This product was last offered at the strikethrough price on
04-14-2026

$ 200.32 USD
Free Shipping on orders $49 and up
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: OEM Hengst Automatic transmission filter OEM Hengst Oil Pan Gasket & Installation Hardware OEM Hengst Drain plug with sealing washer OEM Hengst Fill plug with sealing washer 7 Liters of Liqui-Moly Top Tec 1800 ATF NOTE: Depending on the model, an additional liter of fluid may be necessary if you are draining your oil cooler or removing the valve body. As per ZF's recommendations, Turner Motorsport suggests performing a full service on your 8HP automatic transmission every 50,000 miles. If your vehicle is modified and makes more power than stock or if your vehicle is regularly track-driven, we recommend shorter 30,000-mile service intervals. This will ensure your transmission's fluid is free from contamination which will help extend the life of internal transmission components like clutch packs and solenoids.
Show More Show Less

Ultimate DCT Transmission Service Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:15744061
Part#: 28107850148KT
In Stock
$ 695.08 USD
Free Shipping on orders $49 and up
The DCT transmission in your BMW is nothing short of incredible and exhilarating, but also astronomically expensive to replace. BMW has been labeling fluids as "lifetime" for quite some time now, and as enthusiasts and owners have learned over the years, there simply is no fluid that lasts a lifetime. Kit includes: 7 quarts of Pentosin DCTF-1 fluid DCT transmission cartridge and suction filters Drain and fill plugs Oil pan with gasket
Show More Show Less
Titanium Exhaust Wrap - 2" X 25'
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:385025
Part#: HEA-WRAPKIT-25
Ships in 2 Business Days
$ 29.99 USD
Free Shipping on orders $49 and up

Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees! 

Key Features:

  • 2" wide x 1/16" thick
  • Durable, tightly woven, 100% fiberglass
  • Reduce under hood temperatures
  • Protect other engine components
  • Protect your hands/arms from burns
  • Each roll comes with 5 FREE, 14" long stainless steel zip ties
Show More Show Less

Thermostat Replacement kit - 90C
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:15744051
Part#: 82142209769KT
In Stock
Sale - Save 3% $ 146.99

This product was last offered at the strikethrough price on
05-03-2026

$ 142.66 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 146.99

This product was last offered at the strikethrough price on
05-03-2026

$ 142.66 USD
Free Shipping on orders $49 and up

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:20815185
Part#: BMSWMITC
In Stock
$ 59.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA
Show More Show Less
Burger Motorsport Replacement Billet Performance Intake Filter - 3.5"...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:28968878
Part#: 1123BMS
In Stock
$ 65.00 USD
Free Shipping on orders $49 and up

This is a replacement filter for the popular 3.5" Burger Motorsports Performance Intakes. It comes pre-oiled with blue filter oil and a new clamp.

Includes:

Reusable BMS 3.5" inverted cone performance air filter (1123) Metal clamp

Show More Show Less
Prosport Titanium Exhaust Wrap - 2" x 50
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:385019
Part#: HEA-WRAPKIT-50
Ships in 1-2 days
$ 49.99 USD
Free Shipping on orders $49 and up
Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees!
Show More Show Less


1 Gallon Methanol Tank - Clear/White
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:558165
Part#: 1G-MT-CL
Ships in 4 Business Days
$ 30.00 USD
Free Shipping on orders $49 and up
The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"
Show More Show Less
BMS Pedal Tuner - N52, N54, N55 (Manual Transmission)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:20155613
Part#: BMSPBT-M
Ships on Jul 24, 2026
$ 199.00 USD
Free Shipping on orders $49 and up
The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA
Show More Show Less
Replacement N55 Performance Filter - Red (No Hardware)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:38890883
Part#: BMSREPAFNFFR
In Stock
$ 70.00 USD
Free Shipping on orders $49 and up
Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants. Key Features: Designed for N55 engines Optimizes airflow for increased power Improves throttle response and fuel efficiency Protects engine from contaminants
Show More Show Less

Prosport Gold Heat Reflective Tape - 2" x 15'
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:385020
Part#: HEA-GWRAP-15
Back Ordered
$ 33.99 USD
Free Shipping on orders $49 and up
Constructed of laminated light-weight glass cloth, this gold reflective heat tape is designed to reflect 80% of radiant heat. With excellent pliability, this tape is easy to install. It's as simple as peel and stick.
Show More Show Less

Tire Valve For TPMS Systems
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Autel - Corporate Logo
T#:641919
Part#: AUL1SENSOR
In Stock
Sale - Save 29% $ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD
Free Shipping on orders $49 and up
Sale - Save 29%
$ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD
Free Shipping on orders $49 and up
12g Lower MX-Sensor weight is significantly lighter than most sensors ensures greater security and stability for durable use
52mm Prosport Electrical Oil Pressure Gauge - Clear Lens/White LED ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:31390598
Part#: PSTOP270-12
In Stock at Vendor
$ 45.00 USD
Free Shipping on orders $49 and up

52mm Prosport Electrical Oil Pressure Gauge - Clear Lens/White LED provides precise monitoring of engine oil pressure, ensuring that drivers can detect issues before they become catastrophic. This high-quality gauge is crucial for tracking engine performance and preventing potential damage.

  • Accurate Oil Pressure Monitoring: Measures oil pressure from 0-100 PSI, helping to prevent engine damage by providing early warnings.
  • Clear Lens: Offers a clear and unobstructed view of the gauge readings, making it easy to monitor engine health at a glance.
  • White LED Backlighting: Enhances readability in low-light conditions with a bright and clear display.
  • Complete Kit: Includes sender, mounting hardware, visor, decals, and instructions for easy installation.
  • Durable Construction: Designed to withstand the demands of high-performance driving and continuous use.
Show More Show Less

Eccentric Shaft Replacement Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:22789670
Part#: S55SHAFTRPCKT
Ships in 3 Business Days
$ 1,209.99

This product was last offered at the strikethrough price on
06-19-2026

$ 1,208.99 USD
Free Shipping on orders $49 and up
$ 1,208.99 USD
Free Shipping on orders $49 and up

Ensure the peak performance of your BMW N55 or S55 engine with Turner Motorsport's Eccentric Shaft Replacement Kit. This all-inclusive kit features essential components, including:

  • Camshaft
  • Eccentric Shaft Bearing
  • Valve Cover Gasket Set
  • Gasket

Designed for precision and durability, this kit guarantees optimal engine performance and longevity. Rely on Turner Motorsport for top-quality replacement parts that adhere to the highest standards.

Show More Show Less
Crank Case Vent Hose Kit - S63 4.4L Engine
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:23913949
Part#: CRNKVENTKITKT
In Stock
$ 224.99 USD
Free Shipping on orders $49 and up

Elevate your S63 4.4L engine's capabilities with our meticulously designed Crank Case Vent Hose Kit. Crafted from premium-grade materials, this kit ensures superior ventilation, mitigating pressure accumulation within the engine, thereby enhancing its overall performance.

Engineered to precise specifications, our kit seamlessly replaces the OEM vent hoses, guaranteeing a perfect fit. By reducing stress on the engine, it prolongs its lifespan and maintains peak functionality. Rely on this kit to provide unparalleled performance and unwavering reliability for your S63 4.4L engine.

Show More Show Less

N63 Liqui Moly Top Molygen Change Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:22921269
Part#: LMMOLYGENN63KT
In Stock
Sale - Save 22% $ 166.27

This product was last offered at the strikethrough price on
05-15-2026

$ 129.44 USD
Free Shipping on orders $49 and up
Sale - Save 22%
$ 166.27

This product was last offered at the strikethrough price on
05-15-2026

$ 129.44 USD
Free Shipping on orders $49 and up

Keep your driving machine in top shape with regular maintenance. BMW's service interval for an oil change varies based on driving habits. We recommend changing your oil after no more than 10,000 miles. A 5,000 oil service interval is preferred for aggressive or city driving.

This kit contains:

  • 10 Liters of Liqui Moly Molygen Oil 5w-40
  • Engine Oil Filter
  • Oil Drain Plug Gasket (included with filter kit)

Keep your BMW operating perfectly with this quality service kit from Turner Motorsport.

Show More Show Less

BMW Jack Pad Silver - Set Of 4
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:26438196
Part#: BMWJACKPADSILR4
Ships in 1 Business Day
$ 77.99 USD
Free Shipping on orders $49 and up
Automatic Transmission Service Kit - With Aluminum Oil Pan
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:53644251
Part#: URO011913KT
In Stock
New Item
Sale - Save 1% $ 252.99

This product was last offered at the strikethrough price on
05-30-2026

$ 249.51 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 252.99

This product was last offered at the strikethrough price on
05-30-2026

$ 249.51 USD
Free Shipping on orders $49 and up
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure.
Show More Show Less
Rear Differential Service Kit for various BMW Models
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:42133544
Part#: 835225790TKT
In Stock
$ 59.72 USD
Free Shipping on orders $49 and up
The kit includes 2 Quarts of Red line 75w90 - 57904 and brand new Rein rear diff oil drain plug M22x1.5


52mm Prosport Electrical Oil Pressure Gauge - 0-100 Psi Blue/White ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:31158801
Part#: 216BFWBOPSM.PSI
Ships in 3 Business Days
$ 69.99 USD
Free Shipping on orders $49 and up

52mm Prosport Electrical Oil Pressure Gauge - 0-100 PSI Blue/White is essential for accurate engine monitoring. Unlike factory gauges, which may only alert you after damage has occurred, this Prosport gauge provides real-time, precise oil pressure readings, allowing you to identify potential issues before they escalate.

  • Monitors engine oil pressure from 0 to 100 PSI.
  • Features blue and white illumination for clear visibility.
  • Includes sender, mounting hardware, visor, decals, and instructions.
  • Enhances engine monitoring and helps prevent damage.
  • Universal fitment may require modification for proper installation.
Show More Show Less
BMS DDP5800 Water/Methanol Injection Pump
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:20815186
Part#: BMSDDP5800
Ships in 1 Business Day
Starting at $ 120.00 USD
Free Shipping on orders $49 and up
Starting at $ 120.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.
Show More Show Less
BMS Elite Titanium Cone Seat Lug Nuts - M14x1.25 - 20
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:21209837
Part#: BMS-ETLN20
In Stock
$ 199.00 USD
Free Shipping on orders $49 and up
BMS Elite titanium lug nuts are up to 50% lighter than equivalent OEM steel lugs, have a high tensile strength, and do not succumb to heat degradation, rust, or corrosion. Material: Hot forged grade 5 titanium Ti-6AL-4V Color: Black Wight: 22g each Thread: M14x1.25 Seat: 60º Cone/Conical Hex Head: 19mm Type: Open Set: 20 Lug Nuts
Show More Show Less

Turbo Oil Line Replacement Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:16175681
Part#: 114275770100KT
Ships in 3 Business Days
$ 775.99 USD
Free Shipping on orders $49 and up
Replace leaking or damaged lines to ensure your turbos are well lubricated for long lasting life!

Billet Spark Plug Gapper Tool - 14mm - BMS
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:583132
Part#: BMSBSPGT14MM
Ships in 6 Business Days
$ 35.00 USD
Free Shipping on orders $49 and up

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

  • Precisely gaps spark plugs for enhanced engine performance and efficiency
  • Speeds up the gapping process while ensuring accuracy and uniformity
  • Available in two sizes (14mm and 12mm) for a wider range of compatibility
  • Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
  • Made in the USA for premium quality and durability
Show More Show Less
Performance Water Pump & Thermostat Kit - 90*C - S63
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:30397428
Part#: 11537843738KT2
Ships on Nov 16, 2026
$ 579.99

This product was last offered at the strikethrough price on
04-28-2026

$ 547.99 USD
Free Shipping on orders $49 and up
$ 547.99 USD
Free Shipping on orders $49 and up

The water pump is a known weak point across all BMW models, requiring servicing every 60,000 miles. Along with the water pump, it’s wise to replace the thermostat to ensure your cooling system operates at peak efficiency.

This kit features a 90°C (194°F) thermostat from Hamburg Technic, which opens approximately 15°C earlier than the standard factory thermostat. This lower temperature is particularly advantageous for performance-focused applications.

What's Included:

Genuine BMW Mechanical Water Pump Assembly (11537843738) Hamburg Technic Performance Thermostat - 90°C/194°F (11537586885) Genuine BMW Coolant/Antifreeze - Diluted, 1 Gallon (82141467704) Benefits of a Lower Thermostat Temperature:

Enhanced Engine Cooling: Opens sooner to reduce engine temperature more effectively. Improved Performance: Keeps engine components cooler, allowing for better performance in high-stress conditions. Extended Engine Life: Reduces thermal stress on engine parts, promoting longevity. Prevents Overheating: Helps to avoid overheating in demanding driving scenarios. Optimized Fuel Efficiency: Maintains ideal engine temperature for efficient fuel combustion. Elevate your BMW's cooling system and performance with this expertly curated kit from Turner Motorsport.

Show More Show Less

Improved Racing BMW Oil Cooler Thermostat (180F)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:27171935
Part#: IRTHERM
Back Ordered
Starting at $ 318.99 USD
Free Shipping on orders $49 and up
Starting at $ 318.99 USD
Free Shipping on orders $49 and up
Precise Oil Temperature Control for Your BMW Upgrade your BMW N20, N26, N51, N52, N53, N54, N55, and S55 engine's oil temperature control with Improved Racing's high-performance oil cooler adapter. Designed to address flaws in the factory's restrictive oil cooler adapter and faulty internal flow control valve, this upgrade ensures precise oil temperature control. Improved Racing's thermostat provides quick engine warmup, prevents overcooling, and delivers full oil cooling capacity on demand. Trusted by professional race teams around the globe, Improved Racing's thermostats have proven highly reliable, are backed by a lifetime warranty, and are made in the USA. Option to Use the Factory Oil Cooler and Lines The optional factory oil line adapter allows you to use the factory oil cooler lines for a simple, plug-and-play installation. For maximum performance, the factory oil cooler and lines may be replaced with an aftermarket cooler and AN lines using the AN adapter fittings (-10AN line size is recommended). ​Please note that some applications, such as most BMW SUV's, use a water-to-oil heat exchangers. These applications require plugging the coolant supply and return ports, as well as adding an external air-to-oil cooler and lines (factory or aftermarket). Please note the Oil cooler adapter cannot be used without an oil cooler.
Show More Show Less
Automatic Transmission Service Kit - BMW 8HP F & G-Chassis - Redline ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:31191944
Part#: TMS8HPATSKT
In Stock
$ 255.99 USD
Free Shipping on orders $49 and up
$ 255.99 USD
Free Shipping on orders $49 and up
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: OEM Hengst Automatic transmission filter OEM Hengst Oil Pan Gasket & Installation Hardware OEM Hengst Drain plug with sealing washer OEM Hengst Fill plug with sealing washer 7 Liters of Reline D6 ATF NOTE: Depending on the model, an additional liter of fluid may be necessary if you are draining your oil cooler or removing the valve body. As per ZF's recommendations, Turner Motorsport suggests performing a full service on your 8HP automatic transmission every 50,000 miles. If your vehicle is modified and makes more power than stock or if your vehicle is regularly track-driven, we recommend shorter 30,000-mile service intervals. This will ensure your transmission's fluid is free from contamination which will help extend the life of internal transmission components like clutch packs and solenoids.
Show More Show Less

Liqui Moly Longtime High Tech Oil Change Kit - BMW N63 4.4L
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:24145935
Part#: N63LM2332KT
In Stock
$ 128.48 USD
Free Shipping on orders $49 and up
To keep your driving machine in top shape, regular maintenance is imperative. BMW's service interval for an oil change varies based on driving habits. We recommend changing your oil after no more than 10,000 miles. A 5,000 oil service interval is preferred for aggressive or city driving. This kit contains Ten Liters of Liqui Moly Longtime High Tech Engine Oil 5w-40 Engine Oil Filter Oil Drain Plug Gasket (Included with filter kit)
Show More Show Less

Top-Tier BMW N54/N55 Ignition Service Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:21670137
Part#: TMSN5SPCOILKT
In Stock
Sale - Save 13% $ 285.99

This product was last offered at the strikethrough price on
05-03-2026

$ 248.31 USD
Free Shipping on orders $49 and up
Sale - Save 13%
$ 285.99

This product was last offered at the strikethrough price on
05-03-2026

$ 248.31 USD
Free Shipping on orders $49 and up
Upgrade your BMW N54 and N55 engine with Packaged by Turner kits for optimized performance and fuel efficiency. Our BMW ignition coils feature specialized modifications to boost firepower, delivering increased torque at lower RPMs and more horsepower at higher RPMs. The extent of improvement depends on your engine's current condition, but you'll undoubtedly experience a noticeable difference in performance. Ensure your BMW's engine runs smoothly and efficiently with our comprehensive ignition service kit from ECS Tuning. This kit includes six Bav Auto ignition coils with plug boots, NGK spark plugs, American Grease Stick dielectric grease, and a BMW spark plug service indicator label. Rest assured with a 2-year warranty on all Bavarian Autosport brand parts. Upgrade your BMW N54 and N55 engine's ignition system today for a remarkable driving experience.
Show More Show Less
2 Gallon Low Profile Universal Methanol Tank
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:20946755
Part#: 2G-ULPMT
In Stock
Starting at $ 179.00 USD
Free Shipping on orders $49 and up
Starting at $ 179.00 USD
Free Shipping on orders $49 and up
Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"
Show More Show Less
Oil Filter Housing Gasket Replacement Kit - BMW N54 N55 3.0L ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:24344808
Part#: N54OFHGKT
In Stock
Sale - Save 5% $ 169.99

This product was last offered at the strikethrough price on
06-16-2026

$ 161.37 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 169.99

This product was last offered at the strikethrough price on
06-16-2026

$ 161.37 USD
Free Shipping on orders $49 and up
If you have a leaking oil filter housing seal, why not replace it while doing an oil service? This kit includes an Oil service kit along with an oil filter housing gasket and thermostat housing gasket.
Show More Show Less


WPC-Treated Performance Rod Bearing Service Kit - N63 / S63
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:36066266
Part#: 11247617338KT2
In Stock
Sale - Save 7% $ 1,035.99

This product was last offered at the strikethrough price on
05-03-2026

$ 960.18 USD
Free Shipping on orders $49 and up
Sale - Save 7%
$ 1,035.99

This product was last offered at the strikethrough price on
05-03-2026

$ 960.18 USD
Free Shipping on orders $49 and up

If your engine has higher mileage, don't neglect rod bearing replacement! These bearings are sandwiched between the connecting rod and crankshaft journal and are prone to failure due to overheating, lack of lubrication, or general wear. Replace your rod bearings and prevent a spun bearing.

Starting with ACL’s high-performance bearing shells, our Race Series bearings are built to withstand extreme RPMs and stress. Utilizing a "Duraglide" tri-metal construction and a high-strength overlay plate, these bearings offer superior oiling and heat resistance for high-RPM operation.

Our WPC-treated bearings take ACL’s already impressive design and enhance it even further. The WPC treatment process strengthens and smooths the bearing surface by firing high-speed, ultra-fine particles at the bearing shells, reducing friction and improving durability. This advanced surface treatment ensures smoother operation and improved heat dissipation, which are critical for any high-performance engine.

Kit includes

Turner Motorsport WPC-Treated Race Series Rod Bearing Shells (16) Genuine BMW Connecting Rod Bolts (16) Hardware for Oil Pan & Oil Sump Oil filter Liqui-Moly Molygen 5W-40 (6L) Drain Plug Turner Motorsport Oil Reminder Sticker Oil pan gasket RedLine assembly lube (4 oz.)

Show More Show Less
Autel Autolink AL329
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Autel - Corporate Logo
T#:2914116
Part#: AL329
Ships in 2 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
OBDII Code Reader